=> sf probe
+=> setenv serverip <server_ip_address>
+
+=> setenv ipaddr <board_ip_address>
+
=> tftp 0x12000000 SPL
=> sf erase 0x0 0x10000
-=> sf write 0x12000000 0x400 0x100
+=> sf write 0x12000000 0x400 0x10000
=> tftp 0x12000000 u-boot.img
SETUP_IOMUX_PADS(enet_pads);
gpio_direction_output(ETH_PHY_RESET, 0);
- mdelay(2);
+ mdelay(10);
gpio_set_value(ETH_PHY_RESET, 1);
+ udelay(100);
}
int board_phy_config(struct phy_device *phydev)
writel(0x007F007F, &iomux->gpr[7]);
}
-/*
- * This section requires the differentiation between Solidrun mx6 boards, but
- * for now, it will configure only for the mx6dual hummingboard version.
- */
static void spl_dram_init(int width)
{
struct mx6_ddr_sysinfo sysinfo = {