[PATCH] Update Sequoia (440EPx) config file

The config file now handles the 2nd target, the Rainier (440GRx)
evaluation board better. Additionally the PPC input clock was
adjusted to match the correct value of 33.0 MHz.

Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index e7f0108892c08102ecbcedd48ec2ddbdafffdf71..394b97617b7eb2df66a5695b1b53f7be87ae0f76 100644 (file)
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2007
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * (C) Copyright 2006
@@ -23,7 +23,7 @@
  */
 
 /************************************************************************
- * sequoia.h - configuration for Sequoia board (PowerPC440EPx)
+ * sequoia.h - configuration for Sequoia & Rainier boards
  ***********************************************************************/
 #ifndef __CONFIG_H
 #define __CONFIG_H
@@ -31,7 +31,7 @@
 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
-/* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */
+/* This config file is used for Sequoia (440EPx) and Rainier (440GRx)  */
 #ifndef CONFIG_RAINIER
 #define CONFIG_SEQUOIA         1               /* Board is Sequoia     */
 #define CONFIG_440EPX          1               /* Specific PPC440EPx   */
@@ -39,7 +39,7 @@
 #define CONFIG_440GRX          1               /* Specific PPC440GRx   */
 #endif
 #define CONFIG_4xx             1               /* ... PPC4xx family    */
-#define CONFIG_SYS_CLK_FREQ    33333333        /* external freq to pll */
+#define CONFIG_SYS_CLK_FREQ    33000000        /* external freq to pll */
 
 #define CONFIG_BOARD_EARLY_INIT_F 1            /* Call board_early_init_f */
 #define CONFIG_MISC_INIT_R     1               /* Call misc_init_r     */
@@ -222,9 +222,21 @@
 
 #undef CONFIG_BOOTARGS
 
+/* Setup some board specific values for the default environment variables */
+#ifndef CONFIG_RAINIER
+#define CONFIG_HOSTNAME                sequoia
+#define CFG_BOOTFILE           "bootfile=/tftpboot/sequoia/uImage\0"
+#define CFG_ROOTPATH           "rootpath=/opt/eldk/ppc_4xxFP\0"
+#else
+#define CONFIG_HOSTNAME                rainier
+#define CFG_BOOTFILE           "bootfile=/tftpboot/rainier/uImage\0"
+#define CFG_ROOTPATH           "rootpath=/opt/eldk/ppc_4xx\0"
+#endif
+
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
+       CFG_BOOTFILE                                                    \
+       CFG_ROOTPATH                                                    \
        "netdev=eth0\0"                                                 \
-       "hostname=sequoia\0"                                            \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
                "nfsroot=${serverip}:${rootpath}\0"                     \
        "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
@@ -238,13 +250,11 @@
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
                "bootm\0"                                               \
-       "rootpath=/opt/eldk/ppc_4xxFP\0"                                        \
-       "bootfile=/tftpboot/sequoia/uImage\0"                           \
        "kernel_addr=FC000000\0"                                        \
        "ramdisk_addr=FC180000\0"                                       \
-       "load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0"               \
+       "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0"           \
        "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;"   \
-               "cp.b 100000 FFFA0000 60000\0"                          \
+               "cp.b 200000 FFFA0000 60000\0"                          \
        "upd=run load;run update\0"                                     \
        ""
 #define CONFIG_BOOTCOMMAND     "run flash_self"