Scratch address used by the alternate memory test
You only need to set this if address zero isn't writeable
+- CONFIG_SYS_MEM_RESERVE_SECURE
+ If defined, the size of CONFIG_SYS_MEM_RESERVE_SECURE memory
+ is substracted from total RAM and won't be reported to OS.
+ This memory can be used as secure memory. A variable
+ gd->secure_ram is used to track the location. In systems
+ the RAM base is not zero, or RAM is divided into banks,
+ this variable needs to be recalcuated to get the address.
+
- CONFIG_SYS_MEM_TOP_HIDE (PPC only):
If CONFIG_SYS_MEM_TOP_HIDE is defined in the board config header,
this specified memory area will get subtracted from the top
* Ram is setup, size stored in gd !!
*/
debug("Ram size: %08lX\n", (ulong)gd->ram_size);
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ /* Reserve memory for secure MMU tables, and/or security monitor */
+ gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+ /*
+ * Record secure memory location. Need recalcuate if memory splits
+ * into banks, or the ram base is not zero.
+ */
+ gd->secure_ram = gd->ram_size;
+#endif
#if defined(CONFIG_SYS_MEM_TOP_HIDE)
/*
* Subtract specified amount of memory to hide so that it won't
print_num("-> size", bd->bi_dram[i].size);
}
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ if (gd->secure_ram & MEM_RESERVE_SECURE_SECURED) {
+ print_num("Secure ram",
+ gd->secure_ram & MEM_RESERVE_SECURE_ADDR_MASK);
+ }
+#endif
#if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH)
print_eths();
#endif
unsigned long relocaddr; /* Start address of U-Boot in RAM */
phys_size_t ram_size; /* RAM size */
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+#define MEM_RESERVE_SECURE_SECURED 0x1
+#define MEM_RESERVE_SECURE_MAINTAINED 0x2
+#define MEM_RESERVE_SECURE_ADDR_MASK (~0x3)
+ /*
+ * Secure memory addr
+ * This variable needs maintenance if the RAM base is not zero,
+ * or if RAM splits into non-consecutive banks. It also has a
+ * flag indicating the secure memory is marked as secure by MMU.
+ * Flags used: 0x1 secured
+ * 0x2 maintained
+ */
+ phys_addr_t secure_ram;
+#endif
unsigned long mon_len; /* monitor len */
unsigned long irq_sp; /* irq stack pointer */
unsigned long start_addr_sp; /* start_addr_stackpointer */