mx31pdk: Clean up mx31pdk.h file

No need to use '#define SYMBOL 1' to make it active.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index d019e96d3810f229d1501b090ac461d80f26b6cb..ba1e1873f608e89c863ef63ab75a48cfd47092f7 100644 (file)
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -33,17 +33,17 @@
 #include <asm/arch/imx-regs.h>
 
 /* High Level Configuration Options */
-#define CONFIG_ARM1136         1       /* This is an arm1136 CPU core */
-#define CONFIG_MX31            1       /* in a mx31 */
+#define CONFIG_ARM1136                 /* This is an arm1136 CPU core */
+#define CONFIG_MX31                    /* in a mx31 */
 #define CONFIG_MX31_HCLK_FREQ  26000000
 #define CONFIG_MX31_CLK32      32768
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
-#define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS       1
-#define CONFIG_INITRD_TAG              1
+#define CONFIG_CMDLINE_TAG                     /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
 
 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #define CONFIG_SKIP_LOWLEVEL_INIT
@@ -58,12 +58,12 @@
  * Hardware drivers
  */
 
-#define CONFIG_MXC_UART                1
-#define CONFIG_SYS_MX31_UART1  1
+#define CONFIG_MXC_UART
+#define CONFIG_SYS_MX31_UART1
 #define CONFIG_HW_WATCHDOG
 
-#define CONFIG_HARD_SPI                1
-#define CONFIG_MXC_SPI         1
+#define CONFIG_HARD_SPI
+#define CONFIG_MXC_SPI
 #define CONFIG_DEFAULT_SPI_BUS 1
 #define CONFIG_DEFAULT_SPI_MODE        (SPI_MODE_0 | SPI_CS_HIGH)
 
@@ -72,7 +72,7 @@
 #define CONFIG_FSL_PMIC_CS     2
 #define CONFIG_FSL_PMIC_CLK    1000000
 #define CONFIG_FSL_PMIC_MODE   (SPI_MODE_0 | SPI_CS_HIGH)
-#define CONFIG_RTC_MC13783     1
+#define CONFIG_RTC_MC13783
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -114,9 +114,9 @@
                "nand write 0x81000000 0x0 0x40000\0"
 
 #define CONFIG_NET_MULTI
-#define CONFIG_SMC911X         1
+#define CONFIG_SMC911X
 #define CONFIG_SMC911X_BASE    0xB6000000
-#define CONFIG_SMC911X_32_BIT  1
+#define CONFIG_SMC911X_32_BIT
 
 /*
  * Miscellaneous configurable options
@@ -141,7 +141,7 @@
 
 #define CONFIG_SYS_HZ                  1000
 
-#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_CMDLINE_EDITING
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -156,7 +156,7 @@
 #define CONFIG_NR_DRAM_BANKS   1
 #define PHYS_SDRAM_1           CSD0_BASE
 #define PHYS_SDRAM_1_SIZE      (128 * 1024 * 1024)
-#define CONFIG_BOARD_EARLY_INIT_F      1
+#define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
@@ -168,9 +168,9 @@
  * FLASH and environment organization
  */
 /* No NOR flash present */
-#define CONFIG_SYS_NO_FLASH    1
+#define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_ENV_IS_IN_NAND          1
+#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              0x40000
 #define CONFIG_ENV_OFFSET_REDUND       0x60000
 #define CONFIG_ENV_SIZE                        (128 * 1024)