Add multi chip support to the FSL-UPM driver

This patch adds support for multi-chip NAND devices to the FSL-UPM
driver. The "dev_ready" callback of the "struct fsl_upm_nand" is now
called with the argument "chip_nr" to allow testing the proper chip
select line. The NAND support of the MPC8360ERDK is updated as well.
No other boards are currently using the FSL UPM driver.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

diff --git a/board/freescale/mpc8360erdk/nand.c b/board/freescale/mpc8360erdk/nand.c
index 8e22e138a630f7891895548e697130c98d6ff0ae..aa43350f2d52a20da238ecbf36f21a58fe6384f4 100644 (file)
--- a/board/freescale/mpc8360erdk/nand.c
+++ b/board/freescale/mpc8360erdk/nand.c
@@ -57,7 +57,7 @@ static void upm_setup(struct fsl_upm *upm)
                eieio();
 }
 
-static int dev_ready(void)
+static int dev_ready(int chip_nr)
 {
        if (in_be32(&im->qepio.ioport[4].pdat) & 0x00002000) {
                debug("nand ready\n");

diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 1a1d8c4e61282cc77df124c2bd587b771a5a61a0..73abbbad1f0370ba879ddf0b1db743f5c3afb915 100644 (file)
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -31,26 +31,45 @@ static void fsl_upm_end_pattern(struct fsl_upm *upm)
                eieio();
 }
 
-static void fsl_upm_run_pattern(struct fsl_upm *upm, int width, u32 cmd)
+static void fsl_upm_run_pattern(struct fsl_upm *upm, int width,
+                               void __iomem *io_addr, u32 mar)
 {
-       out_be32(upm->mar, cmd << (32 - width));
+       out_be32(upm->mar, mar);
        switch (width) {
        case 8:
-               out_8(upm->io_addr, 0x0);
+               out_8(io_addr, 0x0);
                break;
        case 16:
-               out_be16(upm->io_addr, 0x0);
+               out_be16(io_addr, 0x0);
                break;
        case 32:
-               out_be32(upm->io_addr, 0x0);
+               out_be32(io_addr, 0x0);
                break;
        }
 }
 
+#if CONFIG_SYS_NAND_MAX_CHIPS > 1
+static void fun_select_chip(struct mtd_info *mtd, int chip_nr)
+{
+       struct nand_chip *chip = mtd->priv;
+       struct fsl_upm_nand *fun = chip->priv;
+
+       if (chip_nr >= 0) {
+               fun->chip_nr = chip_nr;
+               chip->IO_ADDR_R = chip->IO_ADDR_W =
+                       fun->upm.io_addr + fun->chip_offset * chip_nr;
+       } else if (chip_nr == -1) {
+               chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
+       }
+}
+#endif
+
 static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
        struct nand_chip *chip = mtd->priv;
        struct fsl_upm_nand *fun = chip->priv;
+       void __iomem *io_addr;
+       u32 mar;
 
        if (!(ctrl & fun->last_ctrl)) {
                fsl_upm_end_pattern(&fun->upm);
@@ -68,7 +87,13 @@ static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
                        fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
        }
 
-       fsl_upm_run_pattern(&fun->upm, fun->width, cmd);
+       mar = cmd << (32 - fun->width);
+       io_addr = fun->upm.io_addr;
+#if CONFIG_SYS_NAND_MAX_CHIPS > 1
+       if (fun->chip_nr > 0)
+               io_addr += fun->chip_offset * fun->chip_nr;
+#endif
+       fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);
 
        /*
         * Some boards/chips needs this. At least on MPC8360E-RDK we
@@ -77,7 +102,7 @@ static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
         * 0-2 unexpected busy states per block read.
         */
        if (fun->wait_pattern) {
-               while (!fun->dev_ready())
+               while (!fun->dev_ready(fun->chip_nr))
                        debug("unexpected busy state\n");
        }
 }
@@ -125,7 +150,7 @@ static int nand_dev_ready(struct mtd_info *mtd)
        struct nand_chip *chip = mtd->priv;
        struct fsl_upm_nand *fun = chip->priv;
 
-       return fun->dev_ready();
+       return fun->dev_ready(fun->chip_nr);
 }
 
 int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
@@ -139,6 +164,9 @@ int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
        chip->chip_delay = fun->chip_delay;
        chip->ecc.mode = NAND_ECC_SOFT;
        chip->cmd_ctrl = fun_cmd_ctrl;
+#if CONFIG_SYS_NAND_MAX_CHIPS > 1
+       chip->select_chip = fun_select_chip;
+#endif
        chip->read_byte = nand_read_byte;
        chip->read_buf = nand_read_buf;
        chip->write_buf = nand_write_buf;

diff --git a/include/linux/mtd/fsl_upm.h b/include/linux/mtd/fsl_upm.h
index 638a4e468dedb570c28590365acf4a9fc0f18249..ada11c1a09a66ea4259a6f10133c955c7eb75cdf 100644 (file)
--- a/include/linux/mtd/fsl_upm.h
+++ b/include/linux/mtd/fsl_upm.h
@@ -29,8 +29,10 @@ struct fsl_upm_nand {
        int upm_cmd_offset;
        int upm_addr_offset;
        int wait_pattern;
-       int (*dev_ready)(void);
+       int (*dev_ready)(int chip_nr);
        int chip_delay;
+       int chip_offset;
+       int chip_nr;
 
        /* no need to fill */
        int last_ctrl;