return 0;
}
-int spl_board_load_image(void)
+int spl_board_load_image(struct spl_boot_device *bootdev)
{
debug("Returning to FEL sp=%x, lr=%x\n", fel_stash.sp, fel_stash.lr);
return_to_fel(fel_stash.sp, fel_stash.lr);
return 0;
}
-int spl_board_load_image(void)
+int spl_board_load_image(struct spl_boot_device *bootdev)
{
int (*send_cmd)(u32 cmd, u32 arg);
int (*card_blockaddr)(u32 rca);
printf("%s\n", fname);
}
-int spl_board_load_image(void)
+int spl_board_load_image(struct spl_boot_device *bootdev)
{
char fname[256];
int ret;
return count;
}
-static int spl_ram_load_image(void)
+static int spl_ram_load_image(struct spl_boot_device *bootdev)
{
struct image_header *header;
static int spl_load_image(u32 boot_device)
{
+ struct spl_boot_device bootdev;
+
+ bootdev.boot_device = boot_device;
+ bootdev.boot_device_name = NULL;
+
switch (boot_device) {
#ifdef CONFIG_SPL_RAM_DEVICE
case BOOT_DEVICE_RAM:
- return spl_ram_load_image();
+ return spl_ram_load_image(&bootdev);
#endif
#ifdef CONFIG_SPL_MMC_SUPPORT
case BOOT_DEVICE_MMC1:
case BOOT_DEVICE_MMC2:
case BOOT_DEVICE_MMC2_2:
- return spl_mmc_load_image(boot_device);
+ return spl_mmc_load_image(&bootdev);
#endif
#ifdef CONFIG_SPL_UBI
case BOOT_DEVICE_NAND:
case BOOT_DEVICE_ONENAND:
- return spl_ubi_load_image(boot_device);
+ return spl_ubi_load_image(&bootdev);
#else
#ifdef CONFIG_SPL_NAND_SUPPORT
case BOOT_DEVICE_NAND:
- return spl_nand_load_image();
+ return spl_nand_load_image(&bootdev);
#endif
#ifdef CONFIG_SPL_ONENAND_SUPPORT
case BOOT_DEVICE_ONENAND:
- return spl_onenand_load_image();
+ return spl_onenand_load_image(&bootdev);
#endif
#endif
#ifdef CONFIG_SPL_NOR_SUPPORT
case BOOT_DEVICE_NOR:
- return spl_nor_load_image();
+ return spl_nor_load_image(&bootdev);
#endif
#ifdef CONFIG_SPL_YMODEM_SUPPORT
case BOOT_DEVICE_UART:
- return spl_ymodem_load_image();
+ return spl_ymodem_load_image(&bootdev);
#endif
#if defined(CONFIG_SPL_SPI_SUPPORT) || defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
case BOOT_DEVICE_SPI:
- return spl_spi_load_image();
+ return spl_spi_load_image(&bootdev);
#endif
#ifdef CONFIG_SPL_ETH_SUPPORT
case BOOT_DEVICE_CPGMAC:
#ifdef CONFIG_SPL_ETH_DEVICE
- return spl_net_load_image(CONFIG_SPL_ETH_DEVICE);
-#else
- return spl_net_load_image(NULL);
+ bootdev.boot_device_name = CONFIG_SPL_ETH_DEVICE;
#endif
+ return spl_net_load_image(&bootdev);
#endif
#ifdef CONFIG_SPL_USBETH_SUPPORT
case BOOT_DEVICE_USBETH:
- return spl_net_load_image("usb_ether");
+ bootdev.boot_device_name = "usb_ether";
+ return spl_net_load_image(&bootdev);
#endif
#ifdef CONFIG_SPL_USB_SUPPORT
case BOOT_DEVICE_USB:
- return spl_usb_load_image();
+ return spl_usb_load_image(&bootdev);
#endif
#ifdef CONFIG_SPL_DFU_SUPPORT
case BOOT_DEVICE_DFU:
spl_dfu_cmd(0, "dfu_alt_info_ram", "ram", "0");
- return spl_ram_load_image();
+ return spl_ram_load_image(&bootdev);
#endif
#ifdef CONFIG_SPL_SATA_SUPPORT
case BOOT_DEVICE_SATA:
- return spl_sata_load_image();
+ return spl_sata_load_image(&bootdev);
#endif
#ifdef CONFIG_SPL_BOARD_LOAD_IMAGE
case BOOT_DEVICE_BOARD:
- return spl_board_load_image();
+ return spl_board_load_image(&bootdev);
#endif
default:
#if defined(CONFIG_SPL_SERIAL_SUPPORT) && defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
}
#endif
-int spl_mmc_load_image(u32 boot_device)
+int spl_mmc_load_image(struct spl_boot_device *bootdev)
{
struct mmc *mmc = NULL;
u32 boot_mode;
int err = 0;
__maybe_unused int part;
- err = spl_mmc_find_device(&mmc, boot_device);
+ err = spl_mmc_find_device(&mmc, bootdev->boot_device);
if (err)
return err;
return err;
}
- boot_mode = spl_boot_mode(boot_device);
+ boot_mode = spl_boot_mode(bootdev->boot_device);
err = -EINVAL;
switch (boot_mode) {
case MMCSD_MODE_EMMCBOOT:
#include <fdt.h>
#if defined(CONFIG_SPL_NAND_RAW_ONLY)
-int spl_nand_load_image(void)
+int spl_nand_load_image(struct spl_boot_device *bootdev)
{
nand_init();
DECLARE_GLOBAL_DATA_PTR;
-int spl_net_load_image(const char *device)
+int spl_net_load_image(struct spl_boot_device *bootdev)
{
int rv;
printf("No Ethernet devices found\n");
return -ENODEV;
}
- if (device)
- setenv("ethact", device);
+ if (bootdev->boot_device_name)
+ setenv("ethact", bootdev->boot_device_name);
rv = net_loop(BOOTP);
if (rv < 0) {
printf("Problem booting with BOOTP\n");
#include <common.h>
#include <spl.h>
-int spl_nor_load_image(void)
+int spl_nor_load_image(struct spl_boot_device *bootdev)
{
int ret;
/*
#include <asm/io.h>
#include <onenand_uboot.h>
-int spl_onenand_load_image(void)
+int spl_onenand_load_image(struct spl_boot_device *bootdev)
{
struct image_header *header;
int ret;
DECLARE_GLOBAL_DATA_PTR;
-int spl_sata_load_image(void)
+int spl_sata_load_image(struct spl_boot_device *bootdev)
{
int err;
struct blk_desc *stor_dev;
#include <ubispl.h>
#include <spl.h>
-int spl_ubi_load_image(u32 boot_device)
+int spl_ubi_load_image(struct spl_boot_device *bootdev)
{
struct image_header *header;
struct ubispl_info info;
struct ubispl_load volumes[2];
int ret = 1;
- switch (boot_device) {
+ switch (bootdev->boot_device) {
#ifdef CONFIG_SPL_NAND_SUPPORT
case BOOT_DEVICE_NAND:
nand_init();
spl_parse_image_header(&spl_image, header);
out:
#ifdef CONFIG_SPL_NAND_SUPPORT
- if (boot_device == BOOT_DEVICE_NAND)
+ if (bootdev->boot_device == BOOT_DEVICE_NAND)
nand_deselect();
#endif
return ret;
static int usb_stor_curr_dev = -1; /* current device */
#endif
-int spl_usb_load_image(void)
+int spl_usb_load_image(struct spl_boot_device *bootdev)
{
int err;
struct blk_desc *stor_dev;
return size;
}
-int spl_ymodem_load_image(void)
+int spl_ymodem_load_image(struct spl_boot_device *bootdev)
{
int size = 0;
int err;
* configured and available since this code loads the main U-Boot image
* from SPI into SDRAM and starts it from there.
*/
-int spl_spi_load_image(void)
+int spl_spi_load_image(struct spl_boot_device *bootdev)
{
int err = 0;
struct spi_flash *flash;
/*****************************************************************************/
-int spl_spi_load_image(void)
+int spl_spi_load_image(struct spl_boot_device *bootdev)
{
int err;
struct image_header *header;
*/
void spl_display_print(void);
+/**
+ * struct spl_boot_device - Describes a boot device used by SPL
+ *
+ * @boot_device: A number indicating the BOOT_DEVICE type. There are various
+ * BOOT_DEVICE... #defines and enums in U-Boot and they are not consistently
+ * numbered.
+ * @boot_device_name: Named boot device, or NULL if none.
+ *
+ * Note: Additional fields can be added here, bearing in mind that SPL is
+ * size-sensitive and common fields will be present on all boards. This
+ * struct can also be used to return additional information about the load
+ * process if that becomes useful.
+ */
+struct spl_boot_device {
+ uint boot_device;
+ const char *boot_device_name;
+};
+
/* NAND SPL functions */
-int spl_nand_load_image(void);
+int spl_nand_load_image(struct spl_boot_device *bootdev);
/* OneNAND SPL functions */
-int spl_onenand_load_image(void);
+int spl_onenand_load_image(struct spl_boot_device *bootdev);
/* NOR SPL functions */
-int spl_nor_load_image(void);
+int spl_nor_load_image(struct spl_boot_device *bootdev);
/* UBI SPL functions */
-int spl_ubi_load_image(u32 boot_device);
+int spl_ubi_load_image(struct spl_boot_device *bootdev);
/* MMC SPL functions */
-int spl_mmc_load_image(u32 boot_device);
+int spl_mmc_load_image(struct spl_boot_device *bootdev);
/* YMODEM SPL functions */
-int spl_ymodem_load_image(void);
+int spl_ymodem_load_image(struct spl_boot_device *bootdev);
/* SPI SPL functions */
-int spl_spi_load_image(void);
+int spl_spi_load_image(struct spl_boot_device *bootdev);
/* Ethernet SPL functions */
-int spl_net_load_image(const char *device);
+int spl_net_load_image(struct spl_boot_device *bootdev);
/* USB SPL functions */
-int spl_usb_load_image(void);
+int spl_usb_load_image(struct spl_boot_device *bootdev);
/* SATA SPL functions */
-int spl_sata_load_image(void);
+int spl_sata_load_image(struct spl_boot_device *bootdev);
/* SPL FAT image functions */
int spl_load_image_fat(struct blk_desc *block_dev, int partition,
*
* @return 0 on success, negative errno value on failure.
*/
-int spl_board_load_image(void);
+int spl_board_load_image(struct spl_boot_device *bootdev);
#endif