Added pci@8000 block.

Updated ethernet interrupt mappings (moved up 48).
Cleaned up a few comments.

Signed-off-by: Jon Loeliger <jdl@jdl.com>

diff --git a/board/mpc8641hpcn/oftree.dts b/board/mpc8641hpcn/oftree.dts
index d4e40b8a247acc8ba73a00f5ba6b31a2d028486a..26ce6618ab8ec4429f529b7660faf02425e6adca 100644 (file)
--- a/board/mpc8641hpcn/oftree.dts
+++ b/board/mpc8641hpcn/oftree.dts
@@ -30,7 +30,7 @@
                        i-cache-line-size = <20>;       // 32 bytes
                        d-cache-size = <8000>;          // L1, 32K
                        i-cache-size = <8000>;          // L1, 32K
-                       timebase-frequency = <0>;       //  33 MHz, from uboot
+                       timebase-frequency = <0>;       // 33 MHz, from uboot
                        bus-frequency = <0>;            // From uboot
                        clock-frequency = <0>;          // From uboot
                        32-bit;
@@ -44,7 +44,7 @@
                        i-cache-line-size = <20>;       // 32 bytes
                        d-cache-size = <8000>;          // L1, 32K
                        i-cache-size = <8000>;          // L1, 32K
-                       timebase-frequency = <0>;       //  33 MHz, from uboot
+                       timebase-frequency = <0>;       // 33 MHz, from uboot
                        bus-frequency = <0>;            // From uboot
                        clock-frequency = <0>;          // From uboot
                        32-bit;
@@ -55,7 +55,7 @@
        memory {
                device_type = "memory";
                linux,phandle = <300>;
-               reg = <00000000 40000000>;      // 1G at 0x0, replaced by uboot
+               reg = <00000000 40000000>;      // 1G at 0x0
        };
 
        soc8641@f8000000 {
@@ -95,28 +95,28 @@
                        ethernet-phy@0 {
                                linux,phandle = <2452000>;
                                interrupt-parent = <40000>;
-                               interrupts = <a 0>;
+                               interrupts = <3a 0>;
                                reg = <0>;
                                device_type = "ethernet-phy";
                        };
                        ethernet-phy@1 {
                                linux,phandle = <2452001>;
                                interrupt-parent = <40000>;
-                               interrupts = <a 0>;
+                               interrupts = <3a 0>;
                                reg = <1>;
                                device_type = "ethernet-phy";
                        };
                        ethernet-phy@2 {
                                linux,phandle = <2452002>;
                                interrupt-parent = <40000>;
-                               interrupts = <a 0>;
+                               interrupts = <3a 0>;
                                reg = <2>;
                                device_type = "ethernet-phy";
                        };
                        ethernet-phy@3 {
                                linux,phandle = <2452003>;
                                interrupt-parent = <40000>;
-                               interrupts = <a 0>;
+                               interrupts = <3a 0>;
                                reg = <3>;
                                device_type = "ethernet-phy";
                        };
@@ -176,8 +176,8 @@
                serial@4500 {
                        device_type = "serial";
                        compatible = "ns16550"; 
-                       reg = <4500 100>;       // reg base, size
-                       clock-frequency = <0>;  // should we fill in in uboot?
+                       reg = <4500 100>;
+                       clock-frequency = <0>;
                        interrupts = <2a 3>;
                        interrupt-parent = <40000>;
                };
@@ -185,12 +185,120 @@
                serial@4600 {
                        device_type = "serial";
                        compatible = "ns16550";
-                       reg = <4600 100>;       // reg base, size
-                       clock-frequency = <0>;  // should we fill in in uboot?
+                       reg = <4600 100>;
+                       clock-frequency = <0>;
                        interrupts = <2a 3>;
                        interrupt-parent = <40000>;
                };
 
+               pci@8000 {
+                       compatible = "86xx";
+                       device_type = "pci";
+                       linux,phandle = <8000>;
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       reg = <8000 1000>;
+                       bus-range = <0 fe>;
+                       ranges = <02000000 0 80000000 80000000 0 20000000
+                                 01000000 0 00000000 e2000000 0 00100000>;
+                       clock-frequency = <1fca055>;
+                       interrupt-parent = <40000>;
+                       interrupts = <8 0>;
+                       interrupt-map-mask = <f800 0 0 7>;
+                       interrupt-map = <
+                               /* IDSEL 0x11 */
+                               8800 0 0 1 40000 3 0
+                               8800 0 0 2 40000 4 0
+                               8800 0 0 3 40000 5 0
+                               8800 0 0 4 40000 6 0
+
+                               /* IDSEL 0x12 */
+                               9000 0 0 1 40000 4 0
+                               9000 0 0 2 40000 5 0
+                               9000 0 0 3 40000 6 0
+                               9000 0 0 4 40000 3 0
+
+                               /* IDSEL 0x13 */
+                               9800 0 0 1 40000 5 0
+                               9800 0 0 2 40000 6 0
+                               9800 0 0 3 40000 3 0
+                               9800 0 0 4 40000 4 0
+
+                               /* IDSEL 0x14 */
+                               a000 0 0 1 40000 6 0
+                               a000 0 0 2 40000 3 0
+                               a000 0 0 3 40000 4 0
+                               a000 0 0 4 40000 5 0
+
+                               /* IDSEL 0x15 */
+                               a800 0 0 1 40000 0 0
+                               a800 0 0 2 40000 0 0
+                               a800 0 0 3 40000 0 0
+                               a800 0 0 4 40000 0 0
+
+                               /* IDSEL 0x16 */
+                               b000 0 0 1 40000 0 0
+                               b000 0 0 2 40000 0 0
+                               b000 0 0 3 40000 0 0
+                               b000 0 0 4 40000 0 0
+
+                               /* IDSEL 0x17 */
+                               b800 0 0 1 40000 0 0
+                               b800 0 0 2 40000 0 0
+                               b800 0 0 3 40000 0 0
+                               b800 0 0 4 40000 0 0
+
+                               /* IDSEL 0x18 */
+                               c000 0 0 1 40000 0 0
+                               c000 0 0 2 40000 0 0
+                               c000 0 0 3 40000 0 0
+                               c000 0 0 4 40000 0 0
+
+                               /* IDSEL 0x19 */
+                               c800 0 0 1 40000 0 0
+                               c800 0 0 2 40000 0 0
+                               c800 0 0 3 40000 0 0
+                               c800 0 0 4 40000 0 0
+
+                               /* IDSEL 0x1a */
+                               d000 0 0 1 40000 0 0
+                               d000 0 0 2 40000 0 0
+                               d000 0 0 3 40000 0 0
+                               d000 0 0 4 40000 0 0
+
+
+                               /* IDSEL 0x1b */
+                               d800 0 0 1 40000 0 0
+                               d800 0 0 2 40000 0 0
+                               d800 0 0 3 40000 0 0
+                               d800 0 0 4 40000 0 0
+
+                               /* IDSEL 0x1c */
+                               e000 0 0 1 40000 0 0
+                               e000 0 0 2 40000 0 0
+                               e000 0 0 3 40000 0 0
+                               e000 0 0 4 40000 0 0
+
+                               /* IDSEL 0x1d */
+                               e800 0 0 1 40000 0 0
+                               e800 0 0 2 40000 0 0
+                               e800 0 0 3 40000 0 0
+                               e800 0 0 4 40000 0 0
+
+                               /* IDSEL 0x1e */
+                               f000 0 0 1 40000 0 0
+                               f000 0 0 2 40000 0 0
+                               f000 0 0 3 40000 0 0
+                               f000 0 0 4 40000 0 0
+
+                               /* IDSEL 0x1f */
+                               f800 0 0 1 40000 6 0
+                               f800 0 0 2 40000 6 0
+                               f800 0 0 3 40000 6 0
+                               f800 0 0 4 40000 6 0
+                               >;
+               };
                pic@40000 {
                        linux,phandle = <40000>;
                        clock-frequency = <0>;