This commit adapts 4xx boards for partial linking with --gc-sections.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Tirumala Marri <tmarri@apm.com>
Cc: David Updegraff <dave@cray.com>
Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Larry Johnson <lrj@acm.org>
Cc: Peter De Schrijver <p2@mind.be>
Cc: Niklaus Giger <niklaus.giger@netstal.com>
Cc: Daniel Poirot <dan.poirot@windriver.com>
Acked-by: Stefan Roese <sr@denx.de>
#endif
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
PHDRS
{
text PT_LOAD;
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- *(.text)
- *(.got1)
+ *(.text*)
} :text
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
} :text
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
.resetvec RESET_VECTOR_ADDRESS :
{
- *(.resetvec)
+ KEEP(*(.resetvec))
} :text = 0xffff
. = RESET_VECTOR_ADDRESS + 0x4;
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
} :bss
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text*)
+ board/amcc/bamboo/init.o (.text*)
/* Align to next NAND block */
. = ALIGN(0x4000);
/* Keep some space here for redundant env and potential bad env blocks */
. = ALIGN(0x10000);
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
arch/powerpc/cpu/ppc4xx/start.o (.text)
+ board/amcc/canyonlands/init.o (.text*)
/* Align to next NAND block */
. = ALIGN(0x20000);
/* Keep some space here for redundant env and potential bad env blocks */
. = ALIGN(0x80000);
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
arch/powerpc/cpu/ppc4xx/start.o (.text)
+ board/amcc/sequoia/init.o (.text*)
/* Align to next NAND block */
. = ALIGN(0x4000);
/* Keep some space here for redundant env and potential bad env blocks */
. = ALIGN(0x10000);
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text*)
+ board/amcc/sequoia/init.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
$(call cmd_link_o_target, $^)
clean:
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
arch/powerpc/cpu/ppc4xx/start.o (.text)
- board/amirix/ap1000/init.o (.text)
- arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
- arch/powerpc/cpu/ppc4xx/traps.o (.text)
- arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
- arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
- arch/powerpc/cpu/ppc4xx/speed.o (.text)
- common/dlmalloc.o (.text)
- lib/crc32.o (.text)
- arch/powerpc/lib/extable.o (.text)
- lib/zlib.o (.text)
-
-/* . = env_offset;*/
-/* common/env_embedded.o(.text)*/
-
- *(.text)
- *(.got1)
+ board/amirix/ap1000/init.o (.text)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
return (0);
}
-/* ------------------------------------------------------------------------- */
-phys_size_t initdram (int board_type)
-{
- return (L1_MEMSIZE);
-}
-
/* ------------------------------------------------------------------------- */
/* stubs so we can print dates w/o any nvram RTC.*/
int rtc_get (struct rtc_time *tmp)
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
.resetvec 0xFFFFFFFC :
{
- *(.resetvec)
+ KEEP(*(.resetvec))
} = 0xffff
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
. = env_offset;
- common/env_embedded.o(.text)
+ common/env_embedded.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/ppc4xx/start.o (.text)
- board/ml2/init.o (.text)
- arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
- arch/powerpc/cpu/ppc4xx/traps.o (.text)
- arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
- arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
- arch/powerpc/cpu/ppc4xx/speed.o (.text)
- common/dlmalloc.o (.text)
- lib/crc32.o (.text)
- arch/powerpc/lib/extable.o (.text)
- lib/zlib.o (.text)
-
-/* . = env_offset;*/
-/* common/env_embedded.o(.text)*/
-
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
+ *(.data*)
+ *(.sdata*)
CONSTRUCTORS
}
_edata = .;
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
$(call cmd_link_o_target, $^)
clean:
/* ------------------------------------------------------------------------- */
-phys_size_t initdram (int board_type)
-{
- return spd_sdram ();
-}
-
-/* ------------------------------------------------------------------------- */
-
int testdram (void)
{
/* TODO: XXX XXX XXX */
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */
+/*
+ * I2C
+ */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SPEED 400000
+
/*
* Miscellaneous configurable options
*/
#define CONFIG_CMD_EEPROM
#undef CONFIG_CMD_NET
-
+#undef CONFIG_CMD_NFS
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_CMD_EEPROM
#undef CONFIG_CMD_NET
-
+#undef CONFIG_CMD_NFS
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_CMD_EEPROM
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_CMD_JFFS2
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_RTC
#undef CONFIG_CMD_PCI
#undef CONFIG_CMD_I2C
#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */
+/*
+ * I2C
+ */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SPEED 400000
+
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_EBC_CFG 0xb84ef000
-#define CONFIG_SDRAM_BANK0 /* use the standard SDRAM initialization */
+#undef CONFIG_SDRAM_BANK0 /* use private SDRAM initialization */
#undef CONFIG_SPD_EEPROM
/*
{
.resetvec 0xf8004ffc :
{
- *(.resetvec)
+ KEEP(*(.resetvec))
} = 0xffff
.text :
{
.resetvec 0x00800FFC :
{
- *(.resetvec)
+ KEEP(*(.resetvec))
} = 0xffff
.text :
{
.resetvec 0xE3003FFC :
{
- *(.resetvec)
+ KEEP(*(.resetvec))
} = 0xffff
.text :
{
.resetvec 0x00800FFC :
{
- *(.resetvec)
+ KEEP(*(.resetvec))
} = 0xffff
.text :
/*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2010
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
{
.resetvec 0xE0013FFC :
{
- *(.resetvec)
+ KEEP(*(.resetvec))
} = 0xffff
.text :