*/
#include <common.h>
-#include <command.h>
-#include <errno.h>
-#include <malloc.h>
-#include <qfw.h>
-#include <asm/io.h>
-#include <asm/tables.h>
#include <asm/e820.h>
-#include <linux/list.h>
-#include <memalign.h>
-
-/*
- * This function allocates memory for ACPI tables
- *
- * @entry : BIOS linker command entry which tells where to allocate memory
- * (either high memory or low memory)
- * @addr : The address that should be used for low memory allcation. If the
- * memory allocation request is 'ZONE_HIGH' then this parameter will
- * be ignored.
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_allocate(struct bios_linker_entry *entry, u32 *addr)
-{
- uint32_t size, align;
- struct fw_file *file;
- unsigned long aligned_addr;
-
- align = le32_to_cpu(entry->alloc.align);
- /* align must be power of 2 */
- if (align & (align - 1)) {
- printf("error: wrong alignment %u\n", align);
- return -EINVAL;
- }
-
- file = qemu_fwcfg_find_file(entry->alloc.file);
- if (!file) {
- printf("error: can't find file %s\n", entry->alloc.file);
- return -ENOENT;
- }
-
- size = be32_to_cpu(file->cfg.size);
-
- /*
- * ZONE_HIGH means we need to allocate from high memory, since
- * malloc space is already at the end of RAM, so we directly use it.
- * If allocation zone is ZONE_FSEG, then we use the 'addr' passed
- * in which is low memory
- */
- if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) {
- aligned_addr = (unsigned long)memalign(align, size);
- if (!aligned_addr) {
- printf("error: allocating resource\n");
- return -ENOMEM;
- }
- } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) {
- aligned_addr = ALIGN(*addr, align);
- } else {
- printf("error: invalid allocation zone\n");
- return -EINVAL;
- }
-
- debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n",
- file->cfg.name, size, entry->alloc.zone, align, aligned_addr);
-
- qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
- size, (void *)aligned_addr);
- file->addr = aligned_addr;
-
- /* adjust address for low memory allocation */
- if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG)
- *addr = (aligned_addr + size);
-
- return 0;
-}
-
-/*
- * This function patches ACPI tables previously loaded
- * by bios_linker_allocate()
- *
- * @entry : BIOS linker command entry which tells how to patch
- * ACPI tables
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_add_pointer(struct bios_linker_entry *entry)
-{
- struct fw_file *dest, *src;
- uint32_t offset = le32_to_cpu(entry->pointer.offset);
- uint64_t pointer = 0;
-
- dest = qemu_fwcfg_find_file(entry->pointer.dest_file);
- if (!dest || !dest->addr)
- return -ENOENT;
- src = qemu_fwcfg_find_file(entry->pointer.src_file);
- if (!src || !src->addr)
- return -ENOENT;
-
- debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n",
- dest->addr, src->addr, offset, entry->pointer.size, pointer);
-
- memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size);
- pointer = le64_to_cpu(pointer);
- pointer += (unsigned long)src->addr;
- pointer = cpu_to_le64(pointer);
- memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size);
-
- return 0;
-}
-
-/*
- * This function updates checksum fields of ACPI tables previously loaded
- * by bios_linker_allocate()
- *
- * @entry : BIOS linker command entry which tells where to update ACPI table
- * checksums
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_add_checksum(struct bios_linker_entry *entry)
-{
- struct fw_file *file;
- uint8_t *data, cksum = 0;
- uint8_t *cksum_start;
-
- file = qemu_fwcfg_find_file(entry->cksum.file);
- if (!file || !file->addr)
- return -ENOENT;
-
- data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset));
- cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start));
- cksum = table_compute_checksum(cksum_start,
- le32_to_cpu(entry->cksum.length));
- *data = cksum;
-
- return 0;
-}
unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
{
return 6;
}
-
-/* This function loads and patches ACPI tables provided by QEMU */
-u32 write_acpi_tables(u32 addr)
-{
- int i, ret = 0;
- struct fw_file *file;
- struct bios_linker_entry *table_loader;
- struct bios_linker_entry *entry;
- uint32_t size;
-
- /* make sure fw_list is loaded */
- ret = qemu_fwcfg_read_firmware_list();
- if (ret) {
- printf("error: can't read firmware file list\n");
- return addr;
- }
-
- file = qemu_fwcfg_find_file("etc/table-loader");
- if (!file) {
- printf("error: can't find etc/table-loader\n");
- return addr;
- }
-
- size = be32_to_cpu(file->cfg.size);
- if ((size % sizeof(*entry)) != 0) {
- printf("error: table-loader maybe corrupted\n");
- return addr;
- }
-
- table_loader = malloc(size);
- if (!table_loader) {
- printf("error: no memory for table-loader\n");
- return addr;
- }
-
- qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
- size, table_loader);
-
- for (i = 0; i < (size / sizeof(*entry)); i++) {
- entry = table_loader + i;
- switch (le32_to_cpu(entry->command)) {
- case BIOS_LINKER_LOADER_COMMAND_ALLOCATE:
- ret = bios_linker_allocate(entry, &addr);
- if (ret)
- goto out;
- break;
- case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER:
- ret = bios_linker_add_pointer(entry);
- if (ret)
- goto out;
- break;
- case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM:
- ret = bios_linker_add_checksum(entry);
- if (ret)
- goto out;
- break;
- default:
- break;
- }
- }
-
-out:
- if (ret) {
- struct fw_cfg_file_iter iter;
- for (file = qemu_fwcfg_file_iter_init(&iter);
- !qemu_fwcfg_file_iter_end(&iter);
- file = qemu_fwcfg_file_iter_next(&iter)) {
- if (file->addr) {
- free((void *)file->addr);
- file->addr = 0;
- }
- }
- }
-
- free(table_loader);
- return addr;
-}
#include <malloc.h>
#include <qfw.h>
#include <asm/io.h>
+#ifdef CONFIG_GENERATE_ACPI_TABLE
+#include <asm/tables.h>
+#endif
#include <linux/list.h>
static bool fwcfg_present;
static LIST_HEAD(fw_list);
+#ifdef CONFIG_GENERATE_ACPI_TABLE
+/*
+ * This function allocates memory for ACPI tables
+ *
+ * @entry : BIOS linker command entry which tells where to allocate memory
+ * (either high memory or low memory)
+ * @addr : The address that should be used for low memory allcation. If the
+ * memory allocation request is 'ZONE_HIGH' then this parameter will
+ * be ignored.
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_allocate(struct bios_linker_entry *entry, u32 *addr)
+{
+ uint32_t size, align;
+ struct fw_file *file;
+ unsigned long aligned_addr;
+
+ align = le32_to_cpu(entry->alloc.align);
+ /* align must be power of 2 */
+ if (align & (align - 1)) {
+ printf("error: wrong alignment %u\n", align);
+ return -EINVAL;
+ }
+
+ file = qemu_fwcfg_find_file(entry->alloc.file);
+ if (!file) {
+ printf("error: can't find file %s\n", entry->alloc.file);
+ return -ENOENT;
+ }
+
+ size = be32_to_cpu(file->cfg.size);
+
+ /*
+ * ZONE_HIGH means we need to allocate from high memory, since
+ * malloc space is already at the end of RAM, so we directly use it.
+ * If allocation zone is ZONE_FSEG, then we use the 'addr' passed
+ * in which is low memory
+ */
+ if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) {
+ aligned_addr = (unsigned long)memalign(align, size);
+ if (!aligned_addr) {
+ printf("error: allocating resource\n");
+ return -ENOMEM;
+ }
+ } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) {
+ aligned_addr = ALIGN(*addr, align);
+ } else {
+ printf("error: invalid allocation zone\n");
+ return -EINVAL;
+ }
+
+ debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n",
+ file->cfg.name, size, entry->alloc.zone, align, aligned_addr);
+
+ qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
+ size, (void *)aligned_addr);
+ file->addr = aligned_addr;
+
+ /* adjust address for low memory allocation */
+ if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG)
+ *addr = (aligned_addr + size);
+
+ return 0;
+}
+
+/*
+ * This function patches ACPI tables previously loaded
+ * by bios_linker_allocate()
+ *
+ * @entry : BIOS linker command entry which tells how to patch
+ * ACPI tables
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_add_pointer(struct bios_linker_entry *entry)
+{
+ struct fw_file *dest, *src;
+ uint32_t offset = le32_to_cpu(entry->pointer.offset);
+ uint64_t pointer = 0;
+
+ dest = qemu_fwcfg_find_file(entry->pointer.dest_file);
+ if (!dest || !dest->addr)
+ return -ENOENT;
+ src = qemu_fwcfg_find_file(entry->pointer.src_file);
+ if (!src || !src->addr)
+ return -ENOENT;
+
+ debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n",
+ dest->addr, src->addr, offset, entry->pointer.size, pointer);
+
+ memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size);
+ pointer = le64_to_cpu(pointer);
+ pointer += (unsigned long)src->addr;
+ pointer = cpu_to_le64(pointer);
+ memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size);
+
+ return 0;
+}
+
+/*
+ * This function updates checksum fields of ACPI tables previously loaded
+ * by bios_linker_allocate()
+ *
+ * @entry : BIOS linker command entry which tells where to update ACPI table
+ * checksums
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_add_checksum(struct bios_linker_entry *entry)
+{
+ struct fw_file *file;
+ uint8_t *data, cksum = 0;
+ uint8_t *cksum_start;
+
+ file = qemu_fwcfg_find_file(entry->cksum.file);
+ if (!file || !file->addr)
+ return -ENOENT;
+
+ data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset));
+ cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start));
+ cksum = table_compute_checksum(cksum_start,
+ le32_to_cpu(entry->cksum.length));
+ *data = cksum;
+
+ return 0;
+}
+
+/* This function loads and patches ACPI tables provided by QEMU */
+u32 write_acpi_tables(u32 addr)
+{
+ int i, ret = 0;
+ struct fw_file *file;
+ struct bios_linker_entry *table_loader;
+ struct bios_linker_entry *entry;
+ uint32_t size;
+
+ /* make sure fw_list is loaded */
+ ret = qemu_fwcfg_read_firmware_list();
+ if (ret) {
+ printf("error: can't read firmware file list\n");
+ return addr;
+ }
+
+ file = qemu_fwcfg_find_file("etc/table-loader");
+ if (!file) {
+ printf("error: can't find etc/table-loader\n");
+ return addr;
+ }
+
+ size = be32_to_cpu(file->cfg.size);
+ if ((size % sizeof(*entry)) != 0) {
+ printf("error: table-loader maybe corrupted\n");
+ return addr;
+ }
+
+ table_loader = malloc(size);
+ if (!table_loader) {
+ printf("error: no memory for table-loader\n");
+ return addr;
+ }
+
+ qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
+ size, table_loader);
+
+ for (i = 0; i < (size / sizeof(*entry)); i++) {
+ entry = table_loader + i;
+ switch (le32_to_cpu(entry->command)) {
+ case BIOS_LINKER_LOADER_COMMAND_ALLOCATE:
+ ret = bios_linker_allocate(entry, &addr);
+ if (ret)
+ goto out;
+ break;
+ case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER:
+ ret = bios_linker_add_pointer(entry);
+ if (ret)
+ goto out;
+ break;
+ case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM:
+ ret = bios_linker_add_checksum(entry);
+ if (ret)
+ goto out;
+ break;
+ default:
+ break;
+ }
+ }
+
+out:
+ if (ret) {
+ struct fw_cfg_file_iter iter;
+ for (file = qemu_fwcfg_file_iter_init(&iter);
+ !qemu_fwcfg_file_iter_end(&iter);
+ file = qemu_fwcfg_file_iter_next(&iter)) {
+ if (file->addr) {
+ free((void *)file->addr);
+ file->addr = 0;
+ }
+ }
+ }
+
+ free(table_loader);
+ return addr;
+}
+#endif
+
/* Read configuration item using fw_cfg PIO interface */
static void qemu_fwcfg_read_entry_pio(uint16_t entry,
uint32_t size, void *address)
projects / u-boot / commitdiff