nios2: remove epled driver

The epled driver was replaced by altera_pio and gpio_led.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>

diff --git a/board/altera/common/epled.c b/board/altera/common/epled.c
deleted file mode 100644 (file)
index 580d590..0000000
--- a/board/altera/common/epled.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <nios2-io.h>
-#include <status_led.h>
-
-/* The LED port is configured as output only, so we
- * must track the state manually.
- */
-static led_id_t val = 0;
-
-void __led_init (led_id_t mask, int state)
-{
-       nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
-
-       if (state == STATUS_LED_ON)
-               val &= ~mask;
-       else
-               val |= mask;
-       writel (val, &pio->data);
-}
-
-void __led_set (led_id_t mask, int state)
-{
-       nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
-
-       if (state == STATUS_LED_ON)
-               val &= ~mask;
-       else
-               val |= mask;
-       writel (val, &pio->data);
-}
-
-void __led_toggle (led_id_t mask)
-{
-       nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
-
-       val ^= mask;
-       writel (val, &pio->data);
-}

diff --git a/board/altera/nios2-generic/Makefile b/board/altera/nios2-generic/Makefile
index aa362b36090c79f7a86755b63a0fa5f4453e041a..d3c5b43d9b37452310eb93a82d87db90ddfa48ed 100644 (file)
--- a/board/altera/nios2-generic/Makefile
+++ b/board/altera/nios2-generic/Makefile
@@ -8,5 +8,4 @@
 
 obj-y  := nios2-generic.o
 obj-$(CONFIG_CMD_IDE) += ../common/cfide.o
-obj-$(CONFIG_EPLED) += ../common/epled.o
 obj-y  += text_base.o