CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network
host
CONFIG_CMD_RUN run command in env variable
- CONFIG_CMD_SDRAM * print SDRAM configuration information
- (requires CONFIG_CMD_I2C)
CONFIG_CMD_SF * Read/write/erase SPI NOR flash
CONFIG_CMD_SOFTSWITCH * Soft switch setting command for BF60x
CONFIG_CMD_SOURCE "source" command Support
Provides a way to save a binary file using the Motorola S-Record
format over the serial line.
+config CMD_SDRAM
+ bool "sdram - Print SDRAM configuration information"
+ help
+ Provides information about attached SDRAM. This assumed that the
+ SDRAM has an EEPROM with information that can be read using the
+ I2C bus. This is only available on some boards.
+
config CMD_SF
bool "sf"
help
CONFIG_SYS_PROMPT="MPC8349E-mITX-GP> "
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_USB=y
CONFIG_CMD_SATA=y
CONFIG_CMD_PCI=y
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_USB=y
CONFIG_CMD_SATA=y
CONFIG_CMD_PCI=y
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SDRAM=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
# CONFIG_CMD_ENV_EXISTS is not set
CONFIG_CMD_IDE=y
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_MMC=y
+CONFIG_CMD_SDRAM=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SDRAM=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SDRAM=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SDRAM=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_PCMCIA=y
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SDRAM=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_PCI=y
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SDRAM=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SDRAM=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_PCI=y
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_PCI=y
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SDRAM=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_PCI=y
+CONFIG_CMD_SDRAM=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SDRAM=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
* Alphabetical list of all possible commands.
*/
-#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
#define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */
#define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */
#define CONFIG_CMD_ZFS /* ZFS Support */
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_SDRAM
-
#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \
|| defined(CONFIG_USB_STORAGE)
#define CONFIG_SUPPORT_VFAT
#define CONFIG_CPU_SH7722 1
#define CONFIG_MIGO_R 1
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CPU_SH7723 1
#define CONFIG_AP325RXA 1
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_BOOTARGS "console=ttySC2,38400"
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_TEXT_BASE 0x8BFC0000
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_BOOTARGS "console=ttySC4,115200"
#define CONFIG_DISPLAY_BOARDINFO
#include <asm/arch/rmobile.h>
-#define CONFIG_CMD_SDRAM
-
#define BOARD_LATE_INIT
#define CONFIG_BOOTARGS ""
#define CONFIG_ECOVEC_ROMIMAGE_ADDR 0xA0040000
#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_ESPT 1
#define __LITTLE_ENDIAN 1
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_CPU_SH7720 1
#define CONFIG_MS7720SE 1
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_BOOTFILE "/boot/zImage"
#define CONFIG_LOADADDR 0x8E000000
#define CONFIG_CPU_SH7722 1
#define CONFIG_MS7722SE 1
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_BOOTARGS "console=ttySC3,115200"
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_DISPLAY_BOARDINFO
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_CONS_SCIF0 1
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#include <asm/arch/rmobile.h>
-#define CONFIG_CMD_SDRAM
-
/* Support File sytems */
#define CONFIG_SUPPORT_VFAT
#define CONFIG_FS_EXT4
#include <asm/arch/rmobile.h>
-#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CPU_SH7203 1
#define CONFIG_RSK7203 1
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_LOADADDR 0x0C100000 /* RSK7203_SDRAM_BASE + 1MB */
#define CONFIG_SYS_TEXT_BASE 0x5ff80000
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp"
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_TEXT_BASE 0x5ff80000
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp"
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_TEXT_BASE 0x8ef80000
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp"
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SH7763RDP 1
#define __LITTLE_ENDIAN 1
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_BOOTARGS "console=ttySC2,115200 root=1f01"
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_CPU_SH7785 1
#define CONFIG_SH7785LCR 1
-#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SH_ZIMAGEBOOT
#define CONFIG_BOOTARGS "console=ttySC1,115200 root=/dev/nfs ip=dhcp"
/* T-SH7706LSR*/
/* #define CONFIG_T_SH7706LSR 1 */
-#define CONFIG_CMD_SDRAM
-
#define CONFIG_BOOTARGS "console=ttySC0,115200"
/*
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_SDRAM
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
CONFIG_CMDLINE_EDITING
CONFIG_CMDLINE_PS_SUPPORT
CONFIG_CMDLINE_TAG
-CONFIG_CMD_SDRAM
CONFIG_CMD_SF_TEST
CONFIG_CMD_SH_ZIMAGEBOOT
CONFIG_CMD_SPL