atmel_mci: Use 512 byte blocksize if possible

Instead of always using the largest blocksize the card supports, check
if it can support smaller block sizes and use 512 bytes if possible.
Most cards do support this, and other parts of u-boot seem to have
trouble with block sizes different from 512 bytes.

Also enable underrun/overrun protection.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>

diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c
index 9f62c0f14b8f665ca1edb9a415b01b36169a8ce6..bdca1c19f41a6144517c43456ee9c4e4b2940435 100644 (file)
--- a/cpu/at32ap/atmel_mci.c
+++ b/cpu/at32ap/atmel_mci.c
@@ -82,7 +82,9 @@ static void mci_set_mode(unsigned long hz, unsigned long blklen)
 
        blklen &= 0xfffc;
        mmci_writel(MR, (MMCI_BF(CLKDIV, clkdiv)
-                        | MMCI_BF(BLKLEN, blklen)));
+                        | MMCI_BF(BLKLEN, blklen)
+                        | MMCI_BIT(RDPROOF)
+                        | MMCI_BIT(WRPROOF)));
 }
 
 #define RESP_NO_CRC    1
@@ -225,7 +227,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
                                *buffer++ = data;
                                wordcount++;
                        }
-               } while(wordcount < (512 / 4));
+               } while(wordcount < (mmc_blkdev.blksz / 4));
 
                pr_debug("mmc: read %u words, waiting for BLKE\n", wordcount);
 
@@ -243,7 +245,7 @@ out:
 
 fail:
        mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR);
-       printf("mmc: bread failed, card status = ", card_status);
+       printf("mmc: bread failed, card status = %08x\n", card_status);
        goto out;
 }
 
@@ -409,6 +411,7 @@ int mmc_init(int verbose)
 {
        struct mmc_cid cid;
        struct mmc_csd csd;
+       unsigned int max_blksz;
        int ret;
 
        /* Initialize controller */
@@ -444,7 +447,17 @@ int mmc_init(int verbose)
                sizeof(mmc_blkdev.product));
        sprintf((char *)mmc_blkdev.revision, "%x %x",
                cid.prv >> 4, cid.prv & 0x0f);
-       mmc_blkdev.blksz = 1 << csd.read_bl_len;
+
+       /*
+        * If we can't use 512 byte blocks, refuse to deal with the
+        * card. Tons of code elsewhere seems to depend on this.
+        */
+       max_blksz = 1 << csd.read_bl_len;
+       if (max_blksz < 512 || (max_blksz > 512 && !csd.read_bl_partial)) {
+               printf("Card does not support 512 byte reads, aborting.\n");
+               return -ENODEV;
+       }
+       mmc_blkdev.blksz = 512;
        mmc_blkdev.lba = (csd.c_size + 1) * (1 << (csd.c_size_mult + 2));
 
        mci_set_mode(CFG_MMC_CLK_PP, mmc_blkdev.blksz);

diff --git a/cpu/at32ap/atmel_mci.h b/cpu/at32ap/atmel_mci.h
index 0ffbc4fd097ac8de4a0df17acf8ee0646f41c3f0..5b4f5c99b6dea1c31a66419f479a21e2a22a3cab 100644 (file)
--- a/cpu/at32ap/atmel_mci.h
+++ b/cpu/at32ap/atmel_mci.h
@@ -57,6 +57,10 @@
 #define MMCI_CLKDIV_SIZE                       8
 #define MMCI_PWSDIV_OFFSET                     8
 #define MMCI_PWSDIV_SIZE                       3
+#define MMCI_RDPROOF_OFFSET                    11
+#define MMCI_RDPROOF_SIZE                      1
+#define MMCI_WRPROOF_OFFSET                    12
+#define MMCI_WRPROOF_SIZE                      1
 #define MMCI_PDCPADV_OFFSET                    14
 #define MMCI_PDCPADV_SIZE                      1
 #define MMCI_PDCMODE_OFFSET                    15