]> git.sur5r.net Git - u-boot/commitdiff
ARM: DRA72-evm: Enable HW leveling
authorLokesh Vutla <lokeshvutla@ti.com>
Wed, 3 Jun 2015 09:13:24 +0000 (14:43 +0530)
committerTom Rini <trini@konsulko.com>
Fri, 12 Jun 2015 16:43:06 +0000 (12:43 -0400)
Updating EMIF registers to enable HW leveling
on DRA72-evm.
Also updating the timing registers.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
arch/arm/cpu/armv7/omap5/sdram.c

index 942a80a8b4008f56463fedb720c6d5ab7a4522bf..3022b9e06e22f4bb3888de1a1105e59e49a3b21d 100644 (file)
@@ -191,15 +191,15 @@ const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es1 = {
        .sdram_config_init              = 0x61862B32,
        .sdram_config                   = 0x61862B32,
        .sdram_config2                  = 0x08000000,
-       .ref_ctrl                       = 0x0000493E,
+       .ref_ctrl                       = 0x0000514C,
        .ref_ctrl_final                 = 0x0000144A,
        .sdram_tim1                     = 0xD113781C,
-       .sdram_tim2                     = 0x308F7FE3,
-       .sdram_tim3                     = 0x009F86A8,
+       .sdram_tim2                     = 0x305A7FDA,
+       .sdram_tim3                     = 0x409F86A8,
        .read_idle_ctrl                 = 0x00050000,
-       .zq_config                      = 0x0007190B,
+       .zq_config                      = 0x5007190B,
        .temp_alert_config              = 0x00000000,
-       .emif_ddr_phy_ctlr_1_init       = 0x0E24400D,
+       .emif_ddr_phy_ctlr_1_init       = 0x0024400D,
        .emif_ddr_phy_ctlr_1            = 0x0E24400D,
        .emif_ddr_ext_phy_ctrl_1        = 0x10040100,
        .emif_ddr_ext_phy_ctrl_2        = 0x00A400A4,
@@ -207,7 +207,7 @@ const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es1 = {
        .emif_ddr_ext_phy_ctrl_4        = 0x00B000B0,
        .emif_ddr_ext_phy_ctrl_5        = 0x00B000B0,
        .emif_rd_wr_lvl_rmp_win         = 0x00000000,
-       .emif_rd_wr_lvl_rmp_ctl         = 0x00000000,
+       .emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
        .emif_rd_wr_lvl_ctl             = 0x00000000,
        .emif_rd_wr_exec_thresh         = 0x00000305
 };
@@ -533,6 +533,11 @@ dra_ddr3_ext_phy_ctrl_const_base_666MHz[] = {
        0x0,
        0x0,
        0x0,
+       0x0,
+       0x0,
+       0x0,
+       0x0,
+       0x0,
        0x0
 };