Move this in to Kconfig with a default of 115200.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[trini: Run moveconfig.py, reword commit slightly]
Signed-off-by: Tom Rini <trini@konsulko.com>
# CONFIG_CMD_NFS is not set
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=9600
CONFIG_SYS_NS16550=y
CONFIG_MAC_PARTITION=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=9600
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_ISO_PARTITION=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=9600
CONFIG_SYS_NS16550=y
CONFIG_CONSOLE_EXTRA_INFO=y
CONFIG_VIDEO_CT69000=y
CONFIG_ISO_PARTITION=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=9600
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
+CONFIG_BAUDRATE=9600
CONFIG_ISO_PARTITION=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=9600
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_MAC_PARTITION=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=9600
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
+CONFIG_BAUDRATE=9600
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_MAC_PARTITION=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=9600
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_FAT=y
CONFIG_MMC=y
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=38400
CONFIG_SYS_NS16550=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_BAUDRATE=38400
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_CMD_EXT2=y
CONFIG_DOS_PARTITION=y
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=38400
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_BAUDRATE=57600
CONFIG_CMD_CACHE=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_BAUDRATE=57600
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
CONFIG_LIB_RAND=y
CONFIG_CMD_CACHE=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_BAUDRATE=57600
CONFIG_CMD_CACHE=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_BAUDRATE=57600
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_BAUDRATE=38400
CONFIG_MTD_NOR_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
+CONFIG_BAUDRATE=9600
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
+CONFIG_BAUDRATE=57600
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PING=y
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=19200
CONFIG_REGULATOR_PWM=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_RAM=y
+CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_BASE=0xFF130000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
+CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_BAUDRATE=38400
CONFIG_USB=y
CONFIG_USB_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PING=y
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=38400
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PING=y
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=38400
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PING=y
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=38400
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP=y
+CONFIG_BAUDRATE=38400
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_APBUART=y
CONFIG_DEBUG_UART_BASE=0x80000100
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
+CONFIG_BAUDRATE=38400
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_PCI=y
+CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_PCI=y
+CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_PCI=y
+CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_PCI=y
+CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_BAUDRATE=38400
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_BAUDRATE=38400
CONFIG_USB=y
CONFIG_USB_STORAGE=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
+CONFIG_BAUDRATE=9600
CONFIG_OF_LIBFDT=y
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_MISC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=38400
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_BAUDRATE=38400
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_BAUDRATE=38400
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_BAUDRATE=38400
CONFIG_USB=y
CONFIG_USB_STORAGE=y
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_MISC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_MISC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_MISC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
CONFIG_CMD_PING=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_BAUDRATE=9600
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
menu "Serial drivers"
+config BAUDRATE
+ int "Default baudrate"
+ default 115200
+ help
+ Select a default baudrate, where "default" has a driver-specific
+ meaning of either setting the baudrate for the early debug UART
+ in the SPL stage (most drivers) or for choosing a default baudrate
+ in the absence of an environment setting (serial_mxc.c).
+
config REQUIRE_SERIAL_CONSOLE
bool "Require a serial port for console"
# Running without a serial console is not supported by the
/*
* SERIAL
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_NS16550_MEM32
/*
/*
* SERIAL
*/
-#define CONFIG_BAUDRATE 115200
/*
* CFI Flash
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
-
-#define CONFIG_BAUDRATE 115200
-
#define __USB_PHY_TYPE ulpi
#ifdef CONFIG_ARCH_B4860
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"uboot=" CONFIG_UBOOTPATH "\0" \
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_UBOOTPATH "u-boot.bin"
-#define CONFIG_BAUDRATE 115200
-
#ifdef CONFIG_SDCARD
#define CONFIG_DEF_HWCONFIG "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
#else
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
-
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_DEF_HWCONFIG fsl_ddr:ecc=on
#define CONFIG_EXTRA_ENV_SETTINGS \
#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
-#define CONFIG_BAUDRATE 9600
-
#undef CONFIG_BOOTARGS
#undef CONFIG_BOOTCOMMAND
#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
-#define CONFIG_BAUDRATE 9600
-
#undef CONFIG_BOOTARGS
#undef CONFIG_BOOTCOMMAND
*/
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_WATCHDOG
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_WATCHDOG
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_WATCHDOG /* disable watchdog */
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_WATCHDOG /* disable watchdog */
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
/* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 3360 /* timeout in ms, max is 3.36 sec */
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_WATCHDOG
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_WATCHDOG
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_HW_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_HW_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
/**************************************************************
* Environment definitions
**************************************************************/
-#define CONFIG_BAUDRATE 9600 /* STD Baudrate */
/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
/* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */
#define CONFIG_HAS_ETH1
#endif
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 800000
-#define CONFIG_BAUDRATE 115200
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=" CONFIG_NETDEV "\0" \
#define CONFIG_HAS_ETH1
#endif
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 800000
-#define CONFIG_BAUDRATE 115200
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=" CONFIG_NETDEV "\0" \
#define CONFIG_HAS_ETH1
#endif
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
#define CONSOLE ttyS0
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
#define CONFIG_HAS_ETH1
#endif
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 800000
-#define CONFIG_BAUDRATE 115200
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=" CONFIG_NETDEV "\0" \
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS0\0" \
#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS1\0" \
#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:ecc=off\0" \
"netdev=eth0\0" \
#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS1\0" \
#undef CONFIG_CONS_NONE /* define if console on something else */
#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyCPM\0" \
#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS0\0" \
#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS0\0" \
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1,ecc=off\0" \
"netdev=eth0\0" \
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#if defined(CONFIG_PCI1)
#define PCI_ENV \
"pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
#define CONFIG_CMD_SDRAM
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
#define CONFIG_DISPLAY_BOARDINFO
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \
"netdev=eth0\0" \
#define CONFIG_LOADADDR 1000000
-
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
-
-#define CONFIG_BAUDRATE 115200
-
/* Qman/Bman */
#define CONFIG_SYS_DPAA_QBMAN /* support Q/Bman */
#define CONFIG_SYS_QMAN_MEM_BASE 0xff000000
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
-
-#define CONFIG_BAUDRATE 115200
-
#define __USB_PHY_TYPE utmi
#define CONFIG_EXTRA_ENV_SETTINGS \
#define CONFIG_5xx_CONS_SCI1
#undef CONFIG_5xx_CONS_SCI2
-#define CONFIG_BAUDRATE 9600
-
/*
* BOOTP options
*/
/**************************************************************
* Environment definitions
**************************************************************/
-#define CONFIG_BAUDRATE 9600 /* STD Baudrate */
/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
/* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */
#define CONFIG_SYS_CLK_FREQ 33333400 /* external frequency to pll */
-#define CONFIG_BAUDRATE 9600
-
#undef CONFIG_BOOTARGS
#undef CONFIG_BOOTCOMMAND
#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
-#define CONFIG_BAUDRATE 115200
-
#undef CONFIG_BOOTARGS
#undef CONFIG_BOOTCOMMAND
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#undef CONFIG_SYS_EXT_SERIAL_CLOCK
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */
#define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */
-#define CONFIG_BAUDRATE 115200
#define __USB_PHY_TYPE utmi
#define CONFIG_EXTRA_ENV_SETTINGS \
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
#define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */
-#define CONFIG_BAUDRATE 115200
#define __USB_PHY_TYPE utmi
#ifdef CONFIG_ARCH_T1024
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
-
-#define CONFIG_BAUDRATE 115200
-
#define __USB_PHY_TYPE utmi
#define CONFIG_EXTRA_ENV_SETTINGS \
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
-
-#define CONFIG_BAUDRATE 115200
-
#define __USB_PHY_TYPE utmi
#define RAMDISKFILE "t104xrdb/ramdisk.uboot"
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
-#define CONFIG_BAUDRATE 115200
#define __USB_PHY_TYPE utmi
#define CONFIG_EXTRA_ENV_SETTINGS \
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
-#define CONFIG_BAUDRATE 115200
#define __USB_PHY_TYPE utmi
#define CONFIG_EXTRA_ENV_SETTINGS \
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_HVBOOT \
"setenv bootargs config-addr=0x60000000; " \
"bootm 0x01000000 - 0x00f00000"
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_BOOTCOUNT_LIMIT 1
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_SYS_SMC_RXBUFLEN 128
#define CONFIG_SYS_MAXIDLE 10
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_SYS_SMC_RXBUFLEN 128
#define CONFIG_SYS_MAXIDLE 10
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_SYS_SMC_RXBUFLEN 128
#define CONFIG_SYS_MAXIDLE 10
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_SYS_SMC_RXBUFLEN 128
#define CONFIG_SYS_MAXIDLE 10
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_SYS_SMC_RXBUFLEN 128
#define CONFIG_SYS_MAXIDLE 10
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_SYS_SMC_RXBUFLEN 128
#define CONFIG_SYS_MAXIDLE 10
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_SYS_SMC_RXBUFLEN 128
#define CONFIG_SYS_MAXIDLE 10
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_SYS_SMC_RXBUFLEN 128
#define CONFIG_SYS_MAXIDLE 10
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_SYS_SMC_RXBUFLEN 128
#define CONFIG_SYS_MAXIDLE 10
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_SYS_SMC_RXBUFLEN 128
#define CONFIG_SYS_MAXIDLE 10
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_SYS_SMC_RXBUFLEN 128
#define CONFIG_SYS_MAXIDLE 10
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_SYS_SMC_RXBUFLEN 128
#define CONFIG_SYS_MAXIDLE 10
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#if defined(CONFIG_DONGLE)
#define CONFIG_EXTRA_ENV_SETTINGS \
#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
-#define CONFIG_BAUDRATE 9600
-
#undef CONFIG_BOOTARGS
#undef CONFIG_BOOTCOMMAND
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 9600, 19200, 38400, 57600, 115200, 230400 }
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 9600 /* ... at 9600 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/* define to enable silent console */
#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
#error CONFIG_PSC_CONSOLE must be 3
#endif
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
-
#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE
#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR
#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE
*/
/* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
-#define CONFIG_BAUDRATE 38400
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/* Command definition */
#define CONFIG_CMD_BMODE
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/* Ethernet support */
#define CONFIG_PHYLIB
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_CONS_INDEX 1
/* PMIC support */
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_OMAP_ABE_SYSCK
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#endif
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
#define CONFIG_MCFTMR
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT 0
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BOOTCOMMAND "bootm ffc20000"
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1)
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE \
{9600, 19200, 38400, 57600, 115200}
* Serial Port
*/
#define CONFIG_SYS_NS16550_CLK 25000000
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE \
{9600, 19200, 38400, 57600, 115200}
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_IDE
-#define CONFIG_BAUDRATE 38400
#define CONFIG_BOOTARGS "console=ttySC2,38400"
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_ENV
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC4,115200"
#define CONFIG_DISPLAY_BOARDINFO
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/* Command definition */
#undef CONFIG_CMD_LOADB
*/
#define CONFIG_MXC_UART
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
#define CONFIG_MXC_UART_BASE UART1_BASE
/*
#error CONFIG_PSC_CONSOLE must be 3
#endif
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#define BOARD_LATE_INIT
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS ""
#undef CONFIG_SHOW_BOOT_PROGRESS
/*
* NS16550 Configuration
*/
-#define CONFIG_BAUDRATE 115200
/*
* BOOTP options
* in u-boot command interface
*/
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (2)
#define CONFIG_SYS_UART2_ALT3_GPIO
#endif
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_LONGHELP
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID 0/* ignored in arm */
-#define CONFIG_BAUDRATE 115200
-
/*
* Command line configuration.
*/
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
-#define CONFIG_BAUDRATE 115200
/* LED */
#define CONFIG_AT91_LED
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
-#define CONFIG_BAUDRATE 115200
/* LCD */
#define LCD_BPP LCD_COLOR8
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
-#define CONFIG_BAUDRATE 115200
/* LCD */
#define LCD_BPP LCD_COLOR8
"bootz 0x72000000 - 0x71000000"
#endif
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_LONGHELP
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
-#define CONFIG_BAUDRATE 115200
/* LCD */
#define LCD_BPP LCD_COLOR16
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
-#define CONFIG_BAUDRATE 115200
/* LCD */
#define LCD_BPP LCD_COLOR8
"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw"
#endif
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_LONGHELP
#define CONFIG_STACKSIZE (2048)
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS \
"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
#define CONFIG_BOOTCOMMAND \
#define CONFIG_STACKSIZE (2048)
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS \
"root=mtd:main rootfstype=jffs2"
#define CONFIG_BOOTCOMMAND \
#define CONFIG_STACKSIZE (2048)
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS \
"console=ttyS0 root=/dev/mmcblk0p1 fbmem=600k rootwait=1"
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_CLK 33333333
#define CONFIG_SYS_NS16550_MEM32
-#define CONFIG_BAUDRATE 115200
/*
* I2C configuration
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_COM1 0x3e000000
-#define CONFIG_BAUDRATE 115200
-
/* must fit into GPT:u-boot-env partition */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_COM1 0x3e000000
-#define CONFIG_BAUDRATE 115200
-
/* must fit into GPT:u-boot-env partition */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
/* Serial Info */
#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_LOADADDR 0x800000
#define CONFIG_MISC_INIT_R
#define CONFIG_UART_CONSOLE 0
-#define CONFIG_BAUDRATE 115200
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_ICACHE_OFF
#define CONFIG_DCACHE_OFF
#define CONFIG_UART_CONSOLE 0
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BFIN_SERIAL
#undef CONFIG_GZIP
*/
#define CONFIG_UART_CONSOLE 0
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BFIN_SERIAL
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw"
#define CONFIG_BOOTCOMMAND "run sfboot"
#define CONFIG_CMDLINE_EDITING 1
#define CONFIG_ENV_OVERWRITE 1
-#define CONFIG_BAUDRATE 57600
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BFIN_SERIAL
/*
* Misc Settings
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
#define CONFIG_CMDLINE_EDITING 1
#define CONFIG_ENV_OVERWRITE 1
-#define CONFIG_BAUDRATE 115200
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BFIN_SERIAL
* Misc Settings
*/
#define CONFIG_UART_CONSOLE 0
-#define CONFIG_BAUDRATE 57600
/*
* Pull in common ADI header for remaining command/environment setup
#define CONFIG_AUTO_COMPLETE 1
#define CONFIG_LOADS_ECHO 1
#define CONFIG_JTAG_CONSOLE
-#ifndef CONFIG_BAUDRATE
-# define CONFIG_BAUDRATE 57600
-#endif
#ifdef CONFIG_UART_CONSOLE
# define CONFIG_BFIN_SERIAL
#endif
/*
* Console settings
*/
-#define CONFIG_BAUDRATE 57600
#define CONFIG_LOADS_ECHO 1
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BFIN_SERIAL
/*
* Console settings
*/
-#define CONFIG_BAUDRATE 57600
#define CONFIG_LOADS_ECHO 1
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BFIN_SERIAL
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP
-#define CONFIG_BAUDRATE 115200
/*
* Flash
/*
* Misc Settings
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BOOTCOMMAND "run nandboot"
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK 48000000
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
-#define CONFIG_BAUDRATE 115200
/* Network defines */
#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_FLASH_CFI_DRIVER
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-#define CONFIG_BAUDRATE 115200
/* PMIC support */
#define CONFIG_POWER_TPS65217
#define CONSOLEDEV "ttyO2"
#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
#define CONFIG_CONS_INDEX 3
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_OMAP_ABE_SYSCK
/*
* Misc Settings
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
/*
* Misc Settings
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BOOTCOMMAND "run flashboot"
#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0"
/*
* Misc Settings
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
/*
* Misc Settings
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
/*
* Misc Settings
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 1
#define CONFIG_BOOTCOMMAND "run flashboot"
/*
* Misc Settings
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BOOTCOMMAND "run flashboot"
#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0"
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 57600 /* ... at 57600 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*
/* Serial console */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART4_BASE
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/* Shell */
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
-#define CONFIG_BAUDRATE 115200
/* I2C Configuration */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
/* UART setup */
#define CONFIG_CONS_INDEX 4
#define CONFIG_SYS_NS16550_COM4 UART4_BASE
-#define CONFIG_BAUDRATE 115200
/* MMC ENV related defines */
#undef CONFIG_ENV_OFFSET
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 19200
/* ---
* set "#if 0" to "#if 1" if (Hardware)-WATCHDOG should be enabled & change
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/* Command definition */
#undef CONFIG_CMD_LOADB
/*
* Serial Console Configuration
*/
-#define CONFIG_BAUDRATE 115200
/*
* Bootloader Components Configuration
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-#define CONFIG_BAUDRATE 115200
/* NAND support */
#define CONFIG_CMD_NAND
*/
#ifdef CONFIG_TRAILBLAZER
-
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"mp_holdoff=1\0"
#define CONFIG_LOADADDR 1000000
-
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
-
-#define CONFIG_BAUDRATE 115200
-
#ifdef CONFIG_TARGET_P4080DS
#define __USB_PHY_TYPE ulpi
#else
"512k(dtb),6M(kernel)ro,-(rootfs) " \
"root=/dev/mtdblock7 rw rootfstype=jffs2"
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
-
-#define CONFIG_BAUDRATE 115200
-
#define __USB_PHY_TYPE utmi
#define CONFIG_EXTRA_ENV_SETTINGS \
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_SPI
#define CONFIG_DAVINCI_SPI
#endif
#endif
-
-#define CONFIG_BAUDRATE 115200
-
/* valid baudrates */
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
* Serial Driver
*/
#define CONFIG_SYS_LPC32XX_UART 5 /* UART5 */
-#define CONFIG_BAUDRATE 115200
/*
* DMA
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 4 /* console is on PSC4 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BFIN_SERIAL
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTCOMMAND "bootm 0x20030000"
#define CONFIG_BOOTARGS "console=ttyBF0,115200 root=/dev/mtdblock3 rootfstype=ext2"
#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_OMAP_ABE_SYSCK
#define CONFIG_SYS_BOOTM_LEN 0x1000000 /* 16MB max kernel size */
/* UART */
-#define CONFIG_BAUDRATE 115200
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY 19000000
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_SPI
#define CONFIG_DAVINCI_SPI
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_ENV
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_DISPLAY_BOARDINFO
/* Serial port hardware configuration */
#define CONFIG_PL010_SERIAL
#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, \
115200, 230400}
#define CONFIG_SYS_SERIAL0 0x808C0000
*/
#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_MXC_UART_BASE UART2_BASE
-#define CONFIG_BAUDRATE 115200
/* Command definition */
/* SCIF */
#define CONFIG_SCIF_CONSOLE 1
-#define CONFIG_BAUDRATE 115200
#define CONFIG_CONS_SCIF0 1
#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
/* Serial port */
#define CONFIG_ATMEL_USART
#define CONFIG_USART3 /* USART 3 is DBGU */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20))
/* select serial console configuration */
-#define CONFIG_BAUDRATE 115200
/* SD/MMC configuration */
#define CONFIG_BOUNCE_BUFFER
#define INFORM3_OFFSET 0x80c
/* select serial console configuration */
-#define CONFIG_BAUDRATE 115200
#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
#define CONFIG_CMD_HASH
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* select serial console configuration */
-#define CONFIG_BAUDRATE 115200
/* Timer input clock frequency */
#define COUNTER_FREQUENCY 24000000
#define CONFIG_CORE_COUNT 0x8
/* select serial console configuration */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/*
* Command definition
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/* Command definition */
#define CONFIG_CMD_BMODE
/*
* Serial console configuration
*/
-#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/* Partitions */
/*
* Serial console configuration
*/
-#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/* Partitions */
/*
* Serial console configuration
*/
-#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/* Partitions */
#define CONFIG_STACKSIZE (2048)
-#define CONFIG_BAUDRATE 115200
-
/*
* After booting the board for the first time, new ethernet addresses
/*
* Serial console configuration
*/
-#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/* Partitions */
/*
* Serial console configuration
*/
-#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/* Partitions */
#define CONFIG_FFUART
#define CONFIG_CONS_INDEX 3
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 }
#define CONFIG_FIT_DISABLE_SHA256
#define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) }
#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
#define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */
/* Serial port PL010/PL011 through the device model */
#define CONFIG_PL01X_SERIAL
-#define CONFIG_BAUDRATE 115200
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2
#define CONFIG_HAS_ETH0
#endif
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
#define CONFIG_CMD_ENV_FLAGS
#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo"
-#define CONFIG_BAUDRATE 115200
-
/* Initial Memory map for Linux*/
#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
*/
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
-#define CONFIG_BAUDRATE 115200
/* -------------------------------------------------
* Environment
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
/*
* Flash & Environment
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/***********************************************************
* Command definition
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*
/* Serial port PL010/PL011 through the device model */
#define CONFIG_PL01X_SERIAL
-#define CONFIG_BAUDRATE 38400
#define CONFIG_CONS_INDEX 0
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
/*
* Misc Settings
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_UART_CONSOLE 0
#undef CONFIG_SHOW_BOOT_PROGRESS
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
/*
* Flash & Environment
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 115200 /* ... at 9600 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*
#define CONFIG_SYS_NS16550_COM3 UART3_BASE
#define CONFIG_CONS_INDEX 3
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \
115200 }
#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_LOADS_ECHO
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "root=/dev/null console=ttySC4,115200"
#undef CONFIG_SHOW_BOOT_PROGRESS
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART1_BASE /* Base address of UART1 */
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_SPI
#define CONFIG_DAVINCI_SPI
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_serial_clock())
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* Command line configuration */
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
-#define CONFIG_BAUDRATE 115200
/*
* I2C
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#endif
-#define CONFIG_BAUDRATE 115200
-
/*
* I2C
*/
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#endif
-#define CONFIG_BAUDRATE 115200
-
/*
* I2C
*/
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_serial_clock())
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* SD boot SPL */
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_serial_clock())
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* SD boot SPL */
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_serial_clock())
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* IFC */
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external clock provided */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/*
* MMC Driver
/*
* Serial driver
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_NS16550_PORT_MAPPED
/*
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
#if CONFIG_PSC_CONSOLE != 3
#error CONFIG_PSC_CONSOLE must be 3
#endif
-#define CONFIG_BAUDRATE 9600 /* ... at 9600 bps */
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
-#define CONFIG_BAUDRATE 115200
/*
* BOOTP options
#endif
/* uart */
-# define CONFIG_BAUDRATE 115200
/* The following table includes the supported baudrates */
# define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
*/
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
#define CONFIG_NETCONSOLE 1 /* network console */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*
/*
* Serial console
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
#if CONFIG_PSC_CONSOLE != 3
#error CONFIG_PSC_CONSOLE must be 3
#endif
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#define CONFIG_HAS_ETH1
#endif
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
/* Supported commands */
/* Default environment variables */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_BOOTFILE "/boot/zImage"
#define CONFIG_LOADADDR 0x8E000000
#define CONFIG_CMD_PCMCIA
#define CONFIG_CMD_IDE
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_BOOTFILE "/boot/zImage"
#define CONFIG_LOADADDR 0x8E000000
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_SDRAM
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
#define CONFIG_DISPLAY_BOARDINFO
* Command line configuration.
*/
#define CONFIG_SCIF_CONSOLE 1
-#define CONFIG_BAUDRATE 38400
#define CONFIG_CONS_SCIF1 1
#define CONFIG_BOOTARGS "console=ttySC0,38400"
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
*/
#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
115200,230400, 460800, 921600 }
/* auto boot */
/* auto boot */
#define CONFIG_PREBOOT
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
115200, 230400, 460800, 921600 }
/* auto boot */
#define CONFIG_PREBOOT
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
115200, 230400, 460800, 921600 }
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
/* No NOR flash present */
#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/***********************************************************
* Command definition
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/***********************************************************
* Command definition
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/*
* Command definition
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/***********************************************************
* Command definition
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/* Command definition */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/* Command definition */
#define CONFIG_SUPPORT_RAW_INITRD
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/* Command definition */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/* Command definition */
#define CONFIG_SUPPORT_RAW_INITRD
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/* Command definition */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/* Filesystems and image support */
#define CONFIG_SUPPORT_RAW_INITRD
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
#define CONFIG_CONS_INDEX 0
/* Default baudrate can be overridden by board! */
-#ifndef CONFIG_BAUDRATE
-#define CONFIG_BAUDRATE 115200
-#endif
/* FEC Ethernet on SoC */
#ifdef CONFIG_FEC_MXC
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
/* USB */
*/
#define CONFIG_ARC_SERIAL
#define CONFIG_ARC_UART_BASE 0xC0FC1000
-#define CONFIG_BAUDRATE 115200
/*
* Command line configuration
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 5 /* console is on PSC5 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 9600, 19200, 38400, 57600, 115200, 230400 }
/* Serial setup */
#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 115200
#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxbb-odroidc2.dtb\0"
/* select serial console configuration */
#define CONFIG_SERIAL1
-#define CONFIG_BAUDRATE 115200
/* Console configuration */
#define CONFIG_CONS_INDEX 1
#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */
#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
#define CONFIG_CONS_INDEX 3
#define CONFIG_SYS_NS16550_COM3 UART3_BASE
-#define CONFIG_BAUDRATE 115200
#define CONFIG_MISC_INIT_R
/* MMC ENV related defines */
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SPI
# define CONFIG_SYS_NS16550_COM1 (0x90000000)
# define CONFIG_SYS_NS16550_CLK CONFIG_SYS_CLK_FREQ
-#define CONFIG_BAUDRATE CONFIG_SYS_UART_BAUD
#define CONFIG_SYS_BAUDRATE_TABLE {CONFIG_BAUDRATE}
#define CONSOLE_ARG "console=console=ttyS0,115200\0"
/* select serial console configuration */
#define CONFIG_SERIAL2
-#define CONFIG_BAUDRATE 115200
/* Console configuration */
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
#define CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#ifdef __SW_BOOT_NOR
#define __NOR_RST_CMD \
norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \
#define CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
#endif
#endif
-
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#undef CONFIG_BOOTARGS
/*define gps port conf. */
/* register later on to */
/*enable UART function! */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
/* NAND support */
#define CONFIG_CMD_NAND
/* NS16550 Configuration: primary UART via FTDI */
#define CONFIG_SYS_NS16550_COM1 0x44e09000
-#define CONFIG_BAUDRATE 115200
/* I2C Configuration */
#define CONFIG_SYS_I2C_SPEED 100000
/*------------------------------------------------------------
* Console Configuration
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
#define CONFIG_SYS_PBSIZE \
"bootz 0x22000000 - 0x21000000"
#endif
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
#error "Undefined memory device"
#endif
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE \
#error "Undefined memory device"
#endif
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE \
"2M(linux)ro,-(root) rw " \
"rootfstype=jffs2"
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
/*
* Misc Settings
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BOOTCOMMAND "run nandboot"
#define CONFIG_MISC_INIT_R
-
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#undef CONFIG_BOOTARGS
#define CONFIG_MISC_INIT_R
-
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#undef CONFIG_BOOTARGS
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_BOOTCOMMAND \
"test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0"
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_ENV
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC3,115200"
#define CONFIG_DISPLAY_BOARDINFO
/* SCIF */
#define CONFIG_SCIF_CONSOLE 1
-#define CONFIG_BAUDRATE 115200
#define CONFIG_CONS_SCIF1 1
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_CMD_IDE
#define CONFIG_SCIF_CONSOLE 1
-#define CONFIG_BAUDRATE 115200
#define CONFIG_CONS_SCIF0 1
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_INITRD_TAG
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_BAUDRATE 38400
#define CONFIG_BOOTARGS ""
#undef CONFIG_SHOW_BOOT_PROGRESS
#define CONFIG_CMDLINE_EDITING
#define CONFIG_OF_LIBFDT
-#define CONFIG_BAUDRATE 115200
-
#undef CONFIG_SHOW_BOOT_PROGRESS
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_BAUDRATE 1500000
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_BAUDRATE 1500000
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_PL01X_SERIAL
#endif
#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 115200
/* Console configuration */
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_CMD_SDRAM
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_LOADADDR 0x0C100000 /* RSK7203_SDRAM_BASE + 1MB */
#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC3,115200"
#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC7,115200"
#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_UART_PORT (1)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_CMD_IMLS
* select serial console configuration
*/
#define CONFIG_SERIAL2 1 /* use SERIAL2 */
-#define CONFIG_BAUDRATE 115200
/* MMC */
#define SDHCI_MAX_HOSTS 4
/* select serial console configuration */
#define CONFIG_SERIAL2
-#define CONFIG_BAUDRATE 115200
/* Console configuration */
#define CONFIG_SYS_MONITOR_BASE 0
#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=sbc8349\0" \
#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS0\0" \
#define CONFIG_CMD_DFL
#define CONFIG_CMD_SDRAM
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp"
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMD_DFL
#define CONFIG_CMD_SDRAM
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp"
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMD_SDRAM
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp"
#define CONFIG_DISPLAY_BOARDINFO
/* SCIF */
#define CONFIG_SCIF_CONSOLE 1
-#define CONFIG_BAUDRATE 115200
#define CONFIG_CONS_SCIF2 1
#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SH_ZIMAGEBOOT
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC1,115200 root=/dev/nfs ip=dhcp"
#define CONFIG_EXTRA_ENV_SETTINGS \
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_ENV
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC0,115200"
/*
#define CONFIG_SYS_NS16550_COM1 0x44e09000
#define CONFIG_SYS_NS16550_COM4 0x481a6000
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_SERIAL1 1
#define CONFIG_CONS_INDEX 1
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
-#define CONFIG_BAUDRATE 115200
/*
* Ethernet configuration
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
/***********************************************************
* Command definition
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
#endif
-#define CONFIG_BAUDRATE 115200
/* I2C - Bit-bashed */
#define CONFIG_SYS_I2C
/* UARTs/Serial console */
#define CONFIG_ATMEL_USART
-#define CONFIG_BAUDRATE 115200
/* Boot options */
#define CONFIG_SYS_LOAD_ADDR 0x23000000
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
#define CONFIG_CONS_INDEX 3
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \
115200 }
#define CONFIG_SYS_NS16550_CLK 100000000
#endif
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/*
* USB
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
57600, 115200 }
#define CONFIG_SYS_TEXT_BASE 0x7D600000
#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 /* default load addr */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_SYS_HZ_CLOCK 1000000000 /* 1 GHz */
#define CONFIG_BOOTARGS \
#define CONFIG_STACKSIZE (64 << 10)
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS \
"console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
#define CONFIG_BOOTCOMMAND \
#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
#define CONFIG_STACKSIZE (256 * 1024)
-#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS \
"console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
#define CONFIG_BOOTCOMMAND \
#define CONFIG_HAS_ETH0
#endif
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024)
/* serial port (PL011) configuration */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_PL01X_SERIAL
/* user interface */
#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR
/* baudrate */
-#define CONFIG_BAUDRATE 115200
/* The stack sizes are set up in start.S using the settings below */
#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 1000000
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_HVBOOT \
"setenv bootargs config-addr=0x60000000; " \
"bootm 0x01000000 - 0x00f00000"
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
/* EHCI */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
/* GPIO banks */
#define CONFIG_OMAP3_GPIO_2 /* GPIO32 ..63 is in GPIO bank 2 */
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
-#define CONFIG_BAUDRATE 115200
/*
*/
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_CLK 166666666
-#define CONFIG_BAUDRATE 115200
/*
* Ethernet PHY configuration
/* Serial console */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_CONS_INDEX 1
/*
* Misc Settings
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BOOTCOMMAND "run flashboot"
/*
* Misc Settings
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
/* turn on command-line edit/hist/auto */
#define CONFIG_COMMAND_HISTORY
#define CONFIG_SYS_SERIAL0 0x87e024000000
#define CONFIG_SYS_SERIAL1 0x87e025000000
-#define CONFIG_BAUDRATE 115200
-
/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x48020000 /* Base EVM has UART0 */
-#define CONFIG_BAUDRATE 115200
-
/* CPU */
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */
-#define CONFIG_BAUDRATE 115200
-
/* allow overwriting serial config and ethaddr */
#define CONFIG_ENV_OVERWRITE
* console baudrate of 115200 and use the default baud rate table.
*/
#define CONFIG_SYS_MALLOC_LEN SZ_32M
-#define CONFIG_BAUDRATE 115200
#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */
#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */
* Serial Port
*/
#define CONFIG_SYS_NS16550_CLK 40000000
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE \
{9600, 19200, 38400, 57600, 115200}
/* select serial console configuration */
#define CONFIG_SERIAL2
-#define CONFIG_BAUDRATE 115200
#define CONFIG_MACH_TYPE MACH_TYPE_TRATS
/* select serial console configuration */
#define CONFIG_SERIAL2
-#define CONFIG_BAUDRATE 115200
/* Console configuration */
#define CONFIG_CONS_INDEX 3
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
#define CONFIG_SERIAL3 3
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE /* disable vendor parameters protection (serial#, ethaddr) */
#define CONFIG_CONS_INDEX 1 /* use UART0 : used by serial driver */
-#define CONFIG_BAUDRATE 115200
/***********************************************************
* Command definition
#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
/* serial console configuration */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
-#define CONFIG_BAUDRATE 115200
/*
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/* SD/MMC */
#define CONFIG_FSL_ESDHC
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*
#define CONFIG_SYS_NS16550_COM1 UART_1_BASE
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_CLK 921600
-#define CONFIG_BAUDRATE 115200
/*
* SDRAM
#define CONFIG_HOSTNAME ve8313
#define CONFIG_UBOOTPATH ve8313/u-boot.bin
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=" __stringify(CONFIG_NETDEV) "\0" \
"ethprime=" __stringify(CONFIG_TSEC1_NAME) "\0" \
#endif
/* PL011 Serial Configuration */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_CONS_INDEX 0
#define CONFIG_PL01X_SERIAL
#define CONFIG_PL011_SERIAL
(void *)CONFIG_SYS_SERIAL1}
#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 38400
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_SERIAL0 V2M_UART0
#define CONFIG_SYS_SERIAL1 V2M_UART1
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
/* NAND support */
#define CONFIG_CMD_NAND
#undef CONFIG_BOOTARGS /* boot command will set bootargs */
-#define CONFIG_BAUDRATE 9600
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=vme8349\0" \
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
/*
* Command definition
* Serial Driver
*/
#define CONFIG_SYS_LPC32XX_UART 5 /* UART5 - NS16550 */
-#define CONFIG_BAUDRATE 115200
/*
* Ethernet Driver
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
57600, 115200 }
#define CONFIG_SYS_LOADS_BAUD_CHANGE
/*-----------------------------------------------------------------------
* Serial Configuration
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, \
9600, 19200, 38400, 115200}
#define CONFIG_SYS_NS16550_PORT_MAPPED
#define CONFIG_ENV_IS_NOWHERE
#endif
-#define CONFIG_BAUDRATE 115200
/* The following table includes the supported baudrates */
# define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
#define CONFIG_ZYNQ_SERIAL
#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 4800, 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
-#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
/* Input clk to NS16550 (in Hz; the SYS_CLK_FREQ is in kHz) */
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_CLK_FREQ
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*======================*/
*/
#define CONFIG_STUART 1
#define CONFIG_CONS_INDEX 2
-#define CONFIG_BAUDRATE 115200
/*
* Bootloader Components Configuration
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONFIG_CONS_INDEX 1 /* use UART2 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
/*
* Ethernet
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
/* Serial drivers */
-#define CONFIG_BAUDRATE 115200
/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}