]> git.sur5r.net Git - u-boot/commitdiff
armv8: ls2080ardb, ls2080aqds: Adjust memory map for NOR-boot
authorSantan Kumar <santan.kumar@nxp.com>
Fri, 28 Apr 2017 07:17:24 +0000 (12:47 +0530)
committerYork Sun <york.sun@nxp.com>
Tue, 23 May 2017 16:52:29 +0000 (09:52 -0700)
This patch adjusts memory map for images on LS2080ARDB and
LS2080AQDS NOR flash as below

Image Flash Offset
RCW+PBI 0x00000000
Boot firmware (U-Boot) 0x00100000
Boot firmware Environment 0x00300000
PPA firmware 0x00400000
PHY firmware 0x00980000
DPAA2 MC 0x00A00000
DPAA2 DPL 0x00D00000
DPAA2 DPC 0x00E00000
Kernel.itb 0x01000000

Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
arch/arm/cpu/armv8/fsl-layerscape/Kconfig
board/freescale/ls2080aqds/README
board/freescale/ls2080ardb/README
include/configs/ls2080a_common.h
include/configs/ls2080aqds.h
include/configs/ls2080ardb.h

index c8ba2d63ea8ec7382f9f938d4de43d52e6f66f76..fa386c6896287b89f8f06731e501875baf5efe17 100644 (file)
@@ -165,7 +165,7 @@ config SYS_LS_PPA_FW_ADDR
        depends on FSL_LS_PPA
        default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
        default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
-       default 0x580a00000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
+       default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
        default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
        default 0x400000 if SYS_LS_PPA_FW_IN_MMC
        default 0x400000 if SYS_LS_PPA_FW_IN_NAND
index 2808bd5851928db5034ff3c847c6c511034df433..fd0e25a68658f7a0dd0d3c543027ae5a0cbf0556 100644 (file)
@@ -89,6 +89,18 @@ c) NAND boot
 d) SD boot
 e) QSPI boot
 
+Memory map for NOR boot
+-------------------------
+Image                          Flash Offset
+RCW+PBI                                0x00000000
+Boot firmware (U-Boot)         0x00100000
+Boot firmware Environment      0x00300000
+PPA firmware                   0x00400000
+DPAA2 MC                       0x00A00000
+DPAA2 DPL                      0x00D00000
+DPAA2 DPC                      0x00E00000
+Kernel.itb                     0x01000000
+
 Environment Variables
 ---------------------
 - mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined
index fde143d2f4bdd803efbbcb6ca0ae745442668540..f228d8054941db18e872924d28541b1347aefea3 100644 (file)
@@ -85,6 +85,19 @@ a) NOR boot
 b) NAND boot
 c) QSPI boot
 
+Memory map for NOR boot
+-------------------------
+Image                          Flash Offset
+RCW+PBI                                0x00000000
+Boot firmware (U-Boot)         0x00100000
+Boot firmware Environment      0x00300000
+PPA firmware                   0x00400000
+Cortina PHY firmware           0x00980000
+DPAA2 MC                       0x00A00000
+DPAA2 DPL                      0x00D00000
+DPAA2 DPC                      0x00E00000
+Kernel.itb                     0x01000000
+
 cfg_rcw_src switches needs to be changed for booting from different option.
 Refer to board documentation for correct switch setting.
 
index 363bfd4e95eecdbec580b0c0d201ff5790bc669b..7b73139879ee5d99517fab66b5beb31897608bb6 100644 (file)
@@ -193,18 +193,18 @@ unsigned long long get_qixis_addr(void);
        "ramdisk_size=0x2000000\0"              \
        "fdt_high=0xa0000000\0"                 \
        "initrd_high=0xffffffffffffffff\0"      \
-       "kernel_start=0x581200000\0"            \
+       "kernel_start=0x581000000\0"            \
        "kernel_load=0xa0000000\0"              \
        "kernel_size=0x2800000\0"               \
        "console=ttyAMA0,38400n8\0"             \
-       "mcinitcmd=fsl_mc start mc 0x580300000" \
-       " 0x580800000 \0"
+       "mcinitcmd=fsl_mc start mc 0x580a00000" \
+       " 0x580e00000 \0"
 
 #define CONFIG_BOOTARGS                "console=ttyS0,115200 root=/dev/ram0 " \
                                "earlycon=uart8250,mmio,0x21c0500 " \
                                "ramdisk_size=0x2000000 default_hugepagesz=2m" \
                                " hugepagesz=2m hugepages=256"
-#define CONFIG_BOOTCOMMAND     "fsl_mc apply dpl 0x580700000 &&" \
+#define CONFIG_BOOTCOMMAND     "fsl_mc apply dpl 0x580d00000 &&" \
                                " cp.b $kernel_start $kernel_load" \
                                " $kernel_size && bootm $kernel_load"
 
index 469ef9e0a448417d6c8f8bd1e40e3e3eb7afeb8f..4788c15d3212cba8b0cdfaa317a9701158abb0bc 100644 (file)
@@ -265,7 +265,7 @@ unsigned long get_board_ddr_clk(void);
 
 #ifndef CONFIG_QSPI_BOOT
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SECT_SIZE           0x20000
 #define CONFIG_ENV_SIZE                        0x2000
 #endif
@@ -376,12 +376,12 @@ unsigned long get_board_ddr_clk(void);
        "ramdisk_size=0x2000000\0"              \
        "fdt_high=0xa0000000\0"                 \
        "initrd_high=0xffffffffffffffff\0"      \
-       "kernel_start=0x581100000\0"            \
+       "kernel_start=0x581000000\0"            \
        "kernel_load=0xa0000000\0"              \
        "kernel_size=0x2800000\0"               \
        "mcmemsize=0x40000000\0"                \
-       "mcinitcmd=fsl_mc start mc 0x580300000" \
-       " 0x580800000 \0"
+       "mcinitcmd=fsl_mc start mc 0x580a00000" \
+       " 0x580e00000 \0"
 #endif /* CONFIG_SECURE_BOOT */
 
 
index 3774b177fcc8a4047828a64971907355eb13103c..0e920f63742601c8bec259fe09da6ff5052e8870 100644 (file)
@@ -251,7 +251,7 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_CS2_FTIM3           CONFIG_SYS_NAND_FTIM3
 
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SECT_SIZE           0x20000
 #define CONFIG_ENV_SIZE                        0x2000
 #endif
@@ -421,13 +421,13 @@ unsigned long get_board_sys_clk(void);
        "ramdisk_size=0x2000000\0"              \
        "fdt_high=0xa0000000\0"                 \
        "initrd_high=0xffffffffffffffff\0"      \
-       "kernel_start=0x581100000\0"            \
+       "kernel_start=0x581000000\0"            \
        "kernel_load=0xa0000000\0"              \
        "kernel_size=0x2800000\0"               \
        "mcmemsize=0x40000000\0"                \
        "fdtfile=fsl-ls2080a-rdb.dtb\0"         \
-       "mcinitcmd=fsl_mc start mc 0x580300000" \
-       " 0x580800000 \0"                       \
+       "mcinitcmd=fsl_mc start mc 0x580a00000" \
+       " 0x580e00000 \0"                       \
        BOOTENV
 #endif
 #endif
@@ -447,7 +447,7 @@ unsigned long get_board_sys_clk(void);
                           " || run distro_bootcmd"
 #else
 /* Try to boot an on-NOR kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580700000" \
+#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580d00000" \
                           " && cp.b $kernel_start $kernel_load $kernel_size" \
                           " && bootm $kernel_load" \
                           " || run distro_bootcmd"
@@ -463,7 +463,7 @@ unsigned long get_board_sys_clk(void);
 #ifdef CONFIG_QSPI_BOOT
 #define CONFIG_CORTINA_FW_ADDR         0x20980000
 #else
-#define CONFIG_CORTINA_FW_ADDR         0x581000000
+#define CONFIG_CORTINA_FW_ADDR         0x580980000
 #endif
 #define CONFIG_CORTINA_FW_LENGTH       0x40000