Set this to enable various workarounds for old kernels, this results in
sub-optimal settings for newer kernels, only enable if needed.
+config MACPWR
+ string "MAC power pin"
+ default ""
+ help
+ Set the pin used to power the MAC. This takes a string in the format
+ understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
config MMC0_CD_PIN
string "Card detect pin for mmc0"
default "PF6" if MACH_SUN8I_A83T || MACH_SUNXI_H3_H5 || MACH_SUN50I
/* add board specific code here */
int board_init(void)
{
- __maybe_unused int id_pfr1, ret, satapwr_pin;
+ __maybe_unused int id_pfr1, ret, satapwr_pin, macpwr_pin;
gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
gpio_direction_output(satapwr_pin, 1);
#endif
#ifdef CONFIG_MACPWR
- gpio_request(CONFIG_MACPWR, "macpwr");
- gpio_direction_output(CONFIG_MACPWR, 1);
+ macpwr_pin = sunxi_name_to_gpio(CONFIG_MACPWR);
+ gpio_request(macpwr_pin, "macpwr");
+ gpio_direction_output(macpwr_pin, 1);
#endif
/* Uses dm gpio code so do this here and not in i2c_init_board() */
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
+CONFIG_MACPWR="PH23"
CONFIG_VIDEO_COMPOSITE=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="MACPWR=SUNXI_GPH(23)"
CONFIG_SPL=y
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
+CONFIG_MACPWR="PH23"
CONFIG_USB1_VBUS_PIN="PH0"
CONFIG_USB2_VBUS_PIN="PH1"
CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="MACPWR=SUNXI_GPH(23)"
CONFIG_SPL=y
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
+CONFIG_MACPWR="PH23"
CONFIG_MMC0_CD_PIN="PH10"
CONFIG_SATAPWR="PB3"
CONFIG_GMAC_TX_DELAY=4
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="MACPWR=SUNXI_GPH(23)"
CONFIG_SPL=y
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN4I=y
+CONFIG_MACPWR="PH15"
CONFIG_VIDEO_VGA=y
CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="MACPWR=SUNXI_GPH(15)"
CONFIG_SPL=y
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
+CONFIG_MACPWR="PH23"
CONFIG_USB1_VBUS_PIN="PH26"
CONFIG_USB2_VBUS_PIN="PH22"
CONFIG_VIDEO_VGA=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="MACPWR=SUNXI_GPH(23)"
CONFIG_SPL=y
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
+CONFIG_MACPWR="PH23"
CONFIG_MMC0_CD_PIN="PH10"
CONFIG_MMC3_CD_PIN="PH11"
CONFIG_MMC_SUNXI_SLOT_EXTRA=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="MACPWR=SUNXI_GPH(23)"
CONFIG_SPL=y
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
+CONFIG_MACPWR="PH21"
CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="MACPWR=SUNXI_GPH(21)"
CONFIG_SPL=y
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=312
+CONFIG_MACPWR="PH19"
CONFIG_USB0_VBUS_PIN="PB9"
CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="MACPWR=SUNXI_GPH(19)"
CONFIG_SPL=y
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_ZQ=251
+CONFIG_MACPWR="PA21"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB1_VBUS_PIN="PH24"
CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="MACPWR=SUNXI_GPA(21)"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881979
CONFIG_DRAM_ODT_EN=y
+CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus2e"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="MACPWR=SUNXI_GPD(6)"
CONFIG_CONSOLE_MUX=y
CONFIG_SPL=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881979
CONFIG_DRAM_ODT_EN=y
+CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB1_VBUS_PIN="PG13"
CONFIG_SATAPWR="PG11"
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="MACPWR=SUNXI_GPD(6)"
CONFIG_CONSOLE_MUX=y
CONFIG_SPL=y
CONFIG_SPL_I2C_SUPPORT=y