]> git.sur5r.net Git - u-boot/commitdiff
m5373evb: Update NAND driver to new API.
authorScott Wood <scottwood@freescale.com>
Wed, 13 Aug 2008 22:53:48 +0000 (17:53 -0500)
committerScott Wood <scottwood@freescale.com>
Wed, 13 Aug 2008 22:53:48 +0000 (17:53 -0500)
Signed-off-by: Scott Wood <scottwood@freescale.com>
board/freescale/m5373evb/nand.c

index 344a614895d62d843ccfcc6f8d2b57736398868e..404a9c386dffd6de9df9ab81adb0321c62fe7dbb 100644 (file)
@@ -36,64 +36,39 @@ DECLARE_GLOBAL_DATA_PTR;
 #include <linux/mtd/mtd.h>
 
 #define SET_CLE                0x10
-#define CLR_CLE                ~SET_CLE
 #define SET_ALE                0x08
-#define CLR_ALE                ~SET_ALE
 
-static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
 {
        struct nand_chip *this = mtdinfo->priv;
        volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
        u32 nand_baseaddr = (u32) this->IO_ADDR_W;
 
-       switch (cmd) {
-       case NAND_CTL_SETNCE:
-       case NAND_CTL_CLRNCE:
-               break;
-       case NAND_CTL_SETCLE:
-               nand_baseaddr |= SET_CLE;
-               break;
-       case NAND_CTL_CLRCLE:
-               nand_baseaddr &= CLR_CLE;
-               break;
-       case NAND_CTL_SETALE:
-               nand_baseaddr |= SET_ALE;
-               break;
-       case NAND_CTL_CLRALE:
-               nand_baseaddr |= CLR_ALE;
-               break;
-       case NAND_CTL_SETWP:
-               fbcs->csmr2 |= FBCS_CSMR_WP;
-               break;
-       case NAND_CTL_CLRWP:
-               fbcs->csmr2 &= ~FBCS_CSMR_WP;
-               break;
-       }
-       this->IO_ADDR_W = (void __iomem *)(nand_baseaddr);
-}
+       if (ctrl & NAND_CTRL_CHANGE) {
+               ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+               IO_ADDR_W &= ~(SET_ALE | SE_CLE);
 
-static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte)
-{
-       struct nand_chip *this = mtdinfo->priv;
-       *((volatile u8 *)(this->IO_ADDR_W)) = byte;
-}
+               if (ctrl & NAND_CLE)
+                       IO_ADDR_W |= SET_CLE;
+               if (ctrl & NAND_ALE)
+                       IO_ADDR_W |= SET_ALE;
 
-static u8 nand_read_byte(struct mtd_info *mtdinfo)
-{
-       struct nand_chip *this = mtdinfo->priv;
-       return (u8) (*((volatile u8 *)this->IO_ADDR_R));
-}
+               at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE));
+               this->IO_ADDR_W = (void *)IO_ADDR_W;
 
-static int nand_dev_ready(struct mtd_info *mtdinfo)
-{
-       return 1;
+       }
+
+       if (cmd != NAND_CMD_NONE)
+               writeb(cmd, this->IO_ADDR_W);
 }
 
 int board_nand_init(struct nand_chip *nand)
 {
        volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+       volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
 
        *((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004;
+       fbcs->csmr2 &= ~FBCS_CSMR_WP;
 
        /* set up pin configuration */
        gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
@@ -103,11 +78,8 @@ int board_nand_init(struct nand_chip *nand)
        gpio->podr_timer = 0;
 
        nand->chip_delay = 50;
-       nand->eccmode = NAND_ECC_SOFT;
-       nand->hwcontrol = nand_hwcontrol;
-       nand->read_byte = nand_read_byte;
-       nand->write_byte = nand_write_byte;
-       nand->dev_ready = nand_dev_ready;
+       nand->ecc.mode = NAND_ECC_SOFT;
+       nand->cmd_ctrl = nand_hwcontrol;
 
        return 0;
 }