#include "version.h"
#include <asm/cache.h>
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
#define _START _start
#define _FAULT _fault
#include "version.h"
#include <asm/cache.h>
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
#define _START _start
#define _FAULT _fault
#include "version.h"
#include <asm/cache.h>
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
#define _START _start
#define _FAULT _fault
#include "version.h"
#include <asm/cache.h>
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
#define _START _start
#define _FAULT _fault
#include "version.h"
#include <asm/cache.h>
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
#define _START _start
#define _FAULT _fault
#include "version.h"
#include <asm/cache.h>
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
#define _START _start
#define _FAULT _fault
#include "version.h"
#include <asm/cache.h>
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
#define _START _start
#define _FAULT _fault
#include <asm-offsets.h>
#include <config.h>
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING "MPC512X"
-#endif
#include <version.h>
#define CONFIG_521X 1 /* needed for Linux kernel header files*/
#include <asm-offsets.h>
#include <config.h>
#include <mpc83xx.h>
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING "MPC83XX"
-#endif
#include <version.h>
#define CONFIG_83XX 1 /* needed for Linux kernel header files*/
#endif
unsigned long ptmla[2] = {CONFIG_SYS_PCI_PTM1LA, CONFIG_SYS_PCI_PTM2LA};
unsigned long ptmms[2] = {CONFIG_SYS_PCI_PTM1MS, CONFIG_SYS_PCI_PTM2MS};
-#if defined(CONFIG_PIP405) || defined (CONFIG_MIP405)
+#if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) \
+ || defined(CONFIG_TARGET_MIP405T)
unsigned long pmmla[3] = {0x80000000, 0xA0000000, 0};
unsigned long pmmma[3] = {0xE0000001, 0xE0000001, 0};
unsigned long pmmpcila[3] = {0x80000000, 0x00000000, 0};
pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
}
-#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405))
+#if !(defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) \
+ || defined(CONFIG_TARGET_MIP405T))
/*
*As is these functs get called out of flash Not a horrible
config TARGET_MIP405
bool "Support MIP405"
+config TARGET_MIP405T
+ bool "Support MIP405T"
+
config TARGET_PIP405
bool "Support PIP405"
#if defined(CONFIG_440)
b _start_440
#else
-#if defined(CONFIG_BOOT_PCI) && defined(CONFIG_MIP405)
+#if defined(CONFIG_BOOT_PCI) && (defined(CONFIG_TARGET_MIP405) \
+ || defined(CONFIG_TARGET_MIP405T))
b _start_pci
#else
b _start
#include "../pip405/pip405.h"
#include <asm/4xx_pci.h>
#endif
-#ifdef CONFIG_MIP405
+#if defined(CONFIG_TARGET_MIP405) || defined(CONFIG_TARGET_MIP405T)
#include "../mip405/mip405.h"
#include <asm/4xx_pci.h>
#endif
#define I2C_BACKUP_ADDR 0x7C00 /* 0x200 bytes for backup */
#define IMAGE_SIZE CONFIG_SYS_MONITOR_LEN /* ugly, but it works for now */
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
+#if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) \
+ || defined(CONFIG_TARGET_MIP405T)
/*-----------------------------------------------------------------------
* On PIP/MIP405 we have 3 (4) possible boot mode
*
mtdcr(EBC0_CFGDATA, FLASH_CR_B);
}
}
-#endif /* #if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) */
+#endif /* #if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) */
#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
/* adjust flash start and protection info */
#if defined(CONFIG_PATI)
int start_sect;
#endif
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
+#if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) \
+ || defined(CONFIG_TARGET_MIP405T) || defined(CONFIG_PATI)
char *copystr = (char *)src;
ulong *magic = (ulong *)src;
-#endif
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
if (uimage_to_cpu (magic[0]) != IH_MAGIC) {
puts("Bad Magic number\n");
return -1;
return (1);
}
-#else /* #if !defined(CONFIG_PATI */
+#else /* #if !defined(CONFIG_PATI) */
start = FIRM_START;
start_sect = -1;
strcpy(buf,"### No HW ID - assuming PIP405");
}
#endif
-#ifdef CONFIG_MIP405
+#if defined(CONFIG_TARGET_MIP405) || defined(CONFIG_TARGET_MIP405T)
if (!s || strncmp (s, "MIP405", 6)) {
strcpy(buf,"### No HW ID - assuming MIP405");
}
void get_backup_values(backup_t *buf);
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
#define BOOT_MPS 0x01
#define BOOT_PCI 0x02
int get_boot_mode(void);
void setup_cs_reloc(void);
-#endif
void check_env(void);
#if defined(CONFIG_CMD_DOC)
static struct pci_pip405_config_entry piix4_ide_cntrl_f1[] = {
{PCI_CFG_PIIX4_BMIBA, 0x0001000, 4}, /* set BMI to a valid address */
{PCI_COMMAND, 0x0001, 2}, /* enable IO access */
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
{PCI_CFG_PIIX4_IDETIM, 0x80008000, 4}, /* enable Both IDE channels */
#else
{PCI_CFG_PIIX4_IDETIM, 0x00008000, 4}, /* enable IDE channel0 */
/* PIIX4 USB Controller Function 2 */
static struct pci_pip405_config_entry piix4_usb_cntrl_f2[] = {
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
{PCI_INTERRUPT_LINE, 31, 1}, /* Int vector = 31 */
{PCI_BASE_ADDRESS_4, 0x0000E001, 4}, /* Set IO Address to 0xe000 to 0xe01F */
{PCI_LATENCY_TIMER, 0x80, 1}, /* Latency Timer 0x80 */
-if TARGET_MIP405
+if TARGET_MIP405 || TARGET_MIP405T
config SYS_BOARD
default "mip405"
config SYS_CONFIG_NAME
default "MIP405"
+config ISO_STRING
+ string
+ default "MEV-10082-001" if TARGET_MIP405T
+ default "MEV-10072-001" if TARGET_MIP405
+
endif
unsigned char sz; /* log binary => Size = (4MByte<<sz) 5 = 128, 4 = 64, 3 = 32, 2 = 16, 1=8 */
unsigned char ecc; /* if true, ecc is enabled */
} sdram_t;
-#if defined(CONFIG_MIP405T)
+#if defined(CONFIG_TARGET_MIP405T)
const sdram_t sdram_table[] = {
{ 0x0F, /* MIP405T Rev A, 64MByte -1 Board */
3, /* Case Latenty = 3 */
0xff,
0xff }
};
-#endif /*CONFIG_MIP405T */
+#endif /*CONFIG_TARGET_MIP405T */
void SDRAM_err (const char *s)
{
#ifndef SDRAM_DEBUG
#endif
/* check board */
bc = in8 (PLD_PART_REG);
-#if defined(CONFIG_MIP405T)
+#if defined(CONFIG_TARGET_MIP405T)
if((bc & 0x80)==0)
SDRAM_err ("U-Boot configured for a MIP405T not for a MIP405!!!\n");
#else
void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var)
{
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
unsigned char bc,rc,tmp;
int i;
* Check Board Identity:
*/
/* serial String: "MIP405_1000" OR "MIP405T_1000" */
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
#define BOARD_NAME "MIP405"
#else
#define BOARD_NAME "MIP405T"
(cfg >> 1) & 0x1, (cfg >> 2) & 0x1, (cfg >> 3) & 0x1);
printf ("User LED %s\n", (com_mode & 0x4) ? "on" : "off");
printf ("UART Clocks %d\n", (com_mode >> 4) & 0x3);
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
printf ("User Config Switch %d %d %d %d %d %d %d %d\n",
(ext) & 0x1, (ext >> 1) & 0x1, (ext >> 2) & 0x1,
(ext >> 3) & 0x1, (ext >> 4) & 0x1, (ext >> 5) & 0x1,
printf ("IDE Reset %s\n", (ext & 0x01) ? "asserted" : "not asserted");
printf ("IRQs:\n");
printf (" PIIX INTR: %s\n", (irq_reg & 0x80) ? "inactive" : "active");
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
printf (" UART0 IRQ: %s\n", (irq_reg & 0x40) ? "inactive" : "active");
printf (" UART1 IRQ: %s\n", (irq_reg & 0x20) ? "inactive" : "active");
#endif
config SYS_CONFIG_NAME
default "PATI"
+config ISO_STRING
+ string
+ default "MEV-10084-001"
endif
#define PCI_VENDOR_ID_MPL 0x18E6
#define PCI_DEVICE_ID_PATI 0x00DA
-#if defined(CONFIG_MIP405)
+#if defined(CONFIG_TARGET_MIP405) || defined(CONFIG_TARGET_MIP405T)
#define PATI_FIRMWARE_START_OFFSET 0x00300000
-#define PATI_ISO_STRING "MEV-10084-001"
#endif
#define PATI_ENDIAN_MODE 0x3E
config SYS_CONFIG_NAME
default "PIP405"
+config ISO_STRING
+ string
+ default "MEV-10066-001"
endif
The idle value on the SPI bus
+Block Device Emulation
+----------------------
+
+U-Boot can use raw disk images for block device emulation. To e.g. list
+the contents of the root directory on the second partion of the image
+"disk.raw", you can use the following commands:
+
+=>host bind 0 ./disk.raw
+=>ls host 0:2
+
+A disk image can be created using the following commands:
+
+$> truncate -s 1200M ./disk.raw
+$> echo -e "label: gpt\n,64M,U\n,,L" | /usr/sbin/sfdisk ./disk.raw
+$> lodev=`sudo losetup -P -f --show ./disk.raw`
+$> sudo mkfs.vfat -n EFI -v ${lodev}p1
+$> sudo mkfs.ext4 -L ROOT -v ${lodev}p2
+
+
Writing Sandbox Drivers
-----------------------
if ARCH_SUNXI
+config IDENT_STRING
+ default " Allwinner Technology"
+
config SPL_GPIO_SUPPORT
default y
return do_ls(cmdtp, flag, argc, argv, FS_TYPE_SANDBOX);
}
+static int do_host_size(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ return do_size(cmdtp, flag, argc, argv, FS_TYPE_SANDBOX);
+}
+
static int do_host_save(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
U_BOOT_CMD_MKENT(load, 7, 0, do_host_load, "", ""),
U_BOOT_CMD_MKENT(ls, 3, 0, do_host_ls, "", ""),
U_BOOT_CMD_MKENT(save, 6, 0, do_host_save, "", ""),
+ U_BOOT_CMD_MKENT(size, 3, 0, do_host_size, "", ""),
U_BOOT_CMD_MKENT(bind, 3, 0, do_host_bind, "", ""),
U_BOOT_CMD_MKENT(info, 3, 0, do_host_info, "", ""),
U_BOOT_CMD_MKENT(dev, 0, 1, do_host_dev, "", ""),
"host ls hostfs - <filename> - list files on host\n"
"host save hostfs - <addr> <filename> <bytes> [<offset>] - "
"save a file to host\n"
+ "host size hostfs - <filename> - determine size of file on host"
"host bind <dev> [<filename>] - bind \"host\" device to file\n"
"host info [<dev>] - show device binding & info\n"
"host dev [<dev>] - Set or retrieve the current host device\n"
The buffer is allocated immediately after the malloc() region is
ready.
+config IDENT_STRING
+ string "Board specific string to be added to uboot version string"
+ help
+ This options adds the board specific name to u-boot version.
+
config SYS_NO_FLASH
bool "Disable support for parallel NOR flash"
default n
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_B4860QDS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_B4860QDS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_PPC=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_C29XPCIE=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=-1
CONFIG_SPL=y
CONFIG_TPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C_SUPPORT=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
+CONFIG_SPL_I2C_SUPPORT=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
CONFIG_MMC0_CD_PIN="PG0"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-m712"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
+CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_PPC=y
+CONFIG_IDENT_STRING="\n(c) 2003 by MPL AG Switzerland, MEV-10082-001 released"
CONFIG_4xx=y
-CONFIG_TARGET_MIP405=y
-CONFIG_SYS_EXTRA_OPTIONS="MIP405T"
+CONFIG_TARGET_MIP405T=y
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_CMD_I2C=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING="\n(c) 2003 by MPL AG Switzerland, MEV-10072-001 released"
CONFIG_4xx=y
CONFIG_TARGET_MIP405=y
CONFIG_BOOTDELAY=5
CONFIG_PPC=y
+CONFIG_IDENT_STRING="\n(c) 2003 by MPL AG Switzerland, MEV-10084-001 released"
CONFIG_5xx=y
CONFIG_TARGET_PATI=y
CONFIG_BOOTDELAY=5
CONFIG_PPC=y
+CONFIG_IDENT_STRING="\n(c) 2002 by MPL AG Switzerland, MEV-10066-001 released"
CONFIG_4xx=y
CONFIG_TARGET_PIP405=y
CONFIG_BOOTDELAY=5
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T102XRDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMLS is not set
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T102XRDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMLS is not set
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMLS is not set
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T102XQDS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T102XQDS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T102XRDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T102XRDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND,T104XD4RDB,SYS_FSL_DDR4"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD,T104XD4RDB,SYS_FSL_DDR4"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH,T104XD4RDB,SYS_FSL_DDR4"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND,T104XD4RDB,SYS_FSL_DDR4"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD,T104XD4RDB,SYS_FSL_DDR4"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH,T104XD4RDB,SYS_FSL_DDR4"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_FIT=y
CONFIG_SPL=y
CONFIG_SPL_CRYPTO_SUPPORT=y
CONFIG_SPL_HASH_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T208XQDS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T208XQDS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T208XRDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_MEMTEST=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T208XRDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_MEMTEST=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_MEMTEST=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T208XQDS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T208XQDS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T4240QDS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T4240QDS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T4240QDS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T4240QDS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T4240RDB=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_ARM=y
CONFIG_TARGET_VCMA9=y
+CONFIG_IDENT_STRING="\n(c) 2003 - 2011 by MPL AG Switzerland, MEV-10080-001 unstable"
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="VCMA9 # "
CONFIG_ARM=y
CONFIG_TARGET_AM335X_EVM=y
+# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
-# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
CONFIG_ARM=y
CONFIG_TARGET_AM335X_EVM=y
+# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_DEFAULT_DEVICE_TREE="am335x-boneblack"
CONFIG_FIT=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
-# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
CONFIG_ARM=y
CONFIG_TARGET_AM335X_EVM=y
+# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
-# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_OMAP34XX=y
+# CONFIG_SPL_GPIO_SUPPORT is not set
+# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_TARGET_AM3517_CRANE=y
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-# CONFIG_SPL_EXT_SUPPORT is not set
-# CONFIG_SPL_GPIO_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="AM3517_CRANE # "
# CONFIG_CMD_IMI is not set
CONFIG_ARM=y
CONFIG_OMAP54XX=y
+# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_AM57XX_EVM=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_DMA_SUPPORT=y
-# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_OMAP54XX=y
+# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_AM57XX_EVM=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_DMA_SUPPORT=y
-# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_OMAP54XX=y
CONFIG_TI_SECURE_DEVICE=y
+# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_AM57XX_EVM=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_DMA_SUPPORT=y
-# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_TARGET_APF27=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_IDENT_STRING=" apf27 patch 3.10"
CONFIG_BOOTDELAY=5
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_ARNDALE=y
+CONFIG_IDENT_STRING=" for ARNDALE"
CONFIG_DEFAULT_DEVICE_TREE="exynos5250-arndale"
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_ARM=y
CONFIG_TARGET_ASPENITE=y
+CONFIG_IDENT_STRING="\nMarvell-Aspenite DB"
CONFIG_BOOTDELAY=3
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_ARM=y
CONFIG_OMAP34XX=y
+# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_TARGET_CM_T35=y
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
-# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="CM-T3x # "
CONFIG_CMD_BOOTZ=y
CONFIG_ARM=y
CONFIG_OMAP54XX=y
+# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_CM_T54=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
-# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_SATA_SUPPORT=y
-# CONFIG_SPL_SPI_FLASH_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="CM-T54 # "
CONFIG_CMD_BOOTZ=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" controlcenterd 0.01"
CONFIG_MPC85xx=y
CONFIG_TARGET_CONTROLCENTERD=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" controlcenterd 0.01"
CONFIG_MPC85xx=y
CONFIG_TARGET_CONTROLCENTERD=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" controlcenterd trailblazer 0.01"
CONFIG_MPC85xx=y
CONFIG_TARGET_CONTROLCENTERD=y
CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH,DEVELOP"
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" controlcenterd trailblazer 0.01"
CONFIG_MPC85xx=y
CONFIG_TARGET_CONTROLCENTERD=y
CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH"
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_NET2BIG_V2=y
+CONFIG_IDENT_STRING=" D2 v2"
CONFIG_SYS_EXTRA_OPTIONS="D2NET_V2"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" devconcenter 0.06"
CONFIG_4xx=y
CONFIG_TARGET_INTIP=y
CONFIG_FIT=y
CONFIG_ARM=y
CONFIG_OMAP34XX=y
CONFIG_TARGET_DEVKIT8000=y
-CONFIG_SPL=y
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" dlvision-10g 0.06"
CONFIG_4xx=y
CONFIG_TARGET_DLVISION_10G=y
CONFIG_FIT=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" dlvision 0.02"
CONFIG_4xx=y
CONFIG_TARGET_DLVISION=y
CONFIG_FIT=y
CONFIG_ARCH_MX6=y
CONFIG_TARGET_ADVANTECH_DMS_BA16=y
CONFIG_SYS_DDR_1G=y
-CONFIG_HUSH_PARSER=y
CONFIG_BOOTDELAY=1
+CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_FS_GENERIC=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_OF_LIBFDT=y
CONFIG_USB=y
CONFIG_USB_GADGET=y
CONFIG_CI_UDC=y
CONFIG_G_DNL_MANUFACTURER="Advantech"
CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+CONFIG_OF_LIBFDT=y
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_TARGET_ADVANTECH_DMS_BA16=y
-CONFIG_HUSH_PARSER=y
CONFIG_BOOTDELAY=1
+CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_FS_GENERIC=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_OF_LIBFDT=y
CONFIG_USB=y
CONFIG_USB_GADGET=y
CONFIG_CI_UDC=y
CONFIG_G_DNL_MANUFACTURER="Advantech"
CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+CONFIG_OF_LIBFDT=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_DNS325=y
+CONFIG_IDENT_STRING="\nD-Link DNS-325"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_DOCKSTAR=y
+CONFIG_IDENT_STRING="\nSeagate FreeAgent DockStar"
CONFIG_BOOTDELAY=3
CONFIG_SYS_PROMPT="DockStar> "
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_OMAP54XX=y
+# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_DRA7XX_EVM=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_DMA_SUPPORT=y
-# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_OMAP54XX=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TI_SECURE_DEVICE=y
+# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_DRA7XX_EVM=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_DMA_SUPPORT=y
-# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_ARCH_SNAPDRAGON=y
+CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 410C"
CONFIG_DEFAULT_DEVICE_TREE="dragonboard410c"
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="dragonboard410c => "
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_DREAMPLUG=y
+CONFIG_IDENT_STRING="\nMarvell-DreamPlug"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_OMAP34XX=y
+# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_TARGET_ECO5PK=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ECO5-PK # "
# CONFIG_CMD_IMLS is not set
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_TARGET_EDMINIV2=y
+CONFIG_IDENT_STRING=" EDMiniV2"
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS7=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_IDENT_STRING=" for ESPRESSO7420"
CONFIG_DEFAULT_DEVICE_TREE="exynos7420-espresso7420"
CONFIG_SYS_PROMPT="ESPRESSO7420 # "
# CONFIG_AUTOBOOT is not set
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_GOFLEXHOME=y
+CONFIG_IDENT_STRING="\nSeagate GoFlex Home"
CONFIG_BOOTDELAY=3
CONFIG_SYS_PROMPT="GoFlexHome> "
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_TARGET_GPLUGD=y
+CONFIG_IDENT_STRING="\nMarvell-gplugD"
CONFIG_BOOTDELAY=3
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_ASKENV=y
CONFIG_SPARC=y
+CONFIG_IDENT_STRING=" Gaisler LEON3 GR-CPCI-AX2000"
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_TARGET_GR_CPCI_AX2000=y
CONFIG_BOOTDELAY=5
CONFIG_SPARC=y
+CONFIG_IDENT_STRING=" Gaisler LEON3 EP2S60"
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_TARGET_GR_EP2S60=y
CONFIG_BOOTDELAY=5
CONFIG_SPARC=y
+CONFIG_IDENT_STRING=" Gaisler LEON3 GR-XC3S-1500"
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_TARGET_GR_XC3S_1500=y
CONFIG_BOOTDELAY=5
CONFIG_SPARC=y
+CONFIG_IDENT_STRING=" Gaisler GRSIM"
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_TARGET_GRSIM=y
CONFIG_BOOTDELAY=5
CONFIG_SPARC=y
+CONFIG_IDENT_STRING=" Gaisler GRSIM LEON2"
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_TARGET_GRSIM_LEON2=y
CONFIG_BOOTDELAY=5
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_GURUPLUG=y
+CONFIG_IDENT_STRING="\nMarvell-GuruPlug"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x18000000
-CONFIG_DM_SERIAL=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_ARM=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_IDENT_STRING="hikey"
CONFIG_DEFAULT_DEVICE_TREE="hi6220-hikey"
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMLS is not set
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" hrcon 0.01"
CONFIG_MPC83xx=y
CONFIG_TARGET_HRCON=y
CONFIG_FIT=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" hrcon dh 0.01"
CONFIG_MPC83xx=y
CONFIG_TARGET_HRCON=y
CONFIG_FIT=y
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-inet-d978-rev2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_IB62X0=y
+CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ib62x0 => "
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_ICONNECT=y
+CONFIG_IDENT_STRING=" Iomega iConnect"
CONFIG_BOOTDELAY=3
CONFIG_SYS_PROMPT="iconnect => "
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_NETSPACE_V2=y
+CONFIG_IDENT_STRING=" IS v2"
CONFIG_SYS_EXTRA_OPTIONS="INETSPACE_V2"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" intip 0.06"
CONFIG_4xx=y
CONFIG_TARGET_INTIP=y
CONFIG_FIT=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" io64 0.02"
CONFIG_4xx=y
CONFIG_TARGET_IO64=y
CONFIG_FIT=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" io 0.06"
CONFIG_4xx=y
CONFIG_TARGET_IO=y
CONFIG_FIT=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" iocon 0.06"
CONFIG_4xx=y
CONFIG_TARGET_IOCON=y
CONFIG_FIT=y
CONFIG_ARM=y
CONFIG_OMAP44XX=y
+# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_KC1=y
CONFIG_SPL=y
-# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="kc1 # "
CONFIG_CMD_BOOTZ=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_KM_KIRKWOOD=y
+CONFIG_IDENT_STRING="\nKeymile Kirkwood 128M16"
CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD_128M16"
CONFIG_VERSION_VARIABLE=y
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_KM_KIRKWOOD=y
+CONFIG_IDENT_STRING="\nKeymile Kirkwood"
CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD"
CONFIG_VERSION_VARIABLE=y
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_KM_KIRKWOOD=y
+CONFIG_IDENT_STRING="\nKeymile Kirkwood PCI"
CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD_PCI"
CONFIG_VERSION_VARIABLE=y
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_KM_KIRKWOOD=y
+CONFIG_IDENT_STRING="\nKeymile COGE5UN"
CONFIG_SYS_EXTRA_OPTIONS="KM_COGE5UN"
CONFIG_VERSION_VARIABLE=y
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_KM_KIRKWOOD=y
+CONFIG_IDENT_STRING="\nKeymile NUSA"
CONFIG_SYS_EXTRA_OPTIONS="KM_NUSA"
CONFIG_VERSION_VARIABLE=y
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_KM_KIRKWOOD=y
+CONFIG_IDENT_STRING="\nKeymile SUGP1"
CONFIG_SYS_EXTRA_OPTIONS="KM_SUGP1"
CONFIG_VERSION_VARIABLE=y
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_KM_KIRKWOOD=y
+CONFIG_IDENT_STRING="\nKeymile SUV31"
CONFIG_SYS_EXTRA_OPTIONS="KM_SUV31"
CONFIG_VERSION_VARIABLE=y
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_TARGET_LS2080A_EMU=y
+CONFIG_IDENT_STRING=" LS2080A-EMU"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_ARM=y
CONFIG_TARGET_LS2080A_SIMU=y
+CONFIG_IDENT_STRING=" LS2080A-SIMU"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_LSXL=y
+CONFIG_IDENT_STRING=" LS-CHLv2"
CONFIG_SYS_EXTRA_OPTIONS="LSCHLV2"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_LSXL=y
+CONFIG_IDENT_STRING=" LS-XHL"
CONFIG_SYS_EXTRA_OPTIONS="LSXHL"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" - v2.0"
CONFIG_4xx=y
CONFIG_TARGET_LWMON5=y
CONFIG_FIT=y
CONFIG_ARM=y
CONFIG_OMAP34XX=y
+# CONFIG_SPL_GPIO_SUPPORT is not set
+# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_TARGET_MCX=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
-# CONFIG_SPL_EXT_SUPPORT is not set
-# CONFIG_SPL_GPIO_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="mcx # "
# CONFIG_CMD_IMI is not set
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_KM_KIRKWOOD=y
+CONFIG_IDENT_STRING="\nKeymile COGE3UN"
CONFIG_SYS_EXTRA_OPTIONS="KM_MGCOGE3UN"
CONFIG_VERSION_VARIABLE=y
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_OMAP34XX=y
+# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_TARGET_MT_VENTOUX=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="mt_ventoux => "
# CONFIG_CMD_IMLS is not set
CONFIG_DRAM_CLK=408
CONFIG_DRAM_ZQ=3881979
CONFIG_DRAM_ODT_EN=y
-CONFIG_MMC0_CD_PIN="PF6"
-# CONFIG_VIDEO is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_USB_EHCI_HCD=y
CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_NAS220=y
+CONFIG_IDENT_STRING="\nNAS 220"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="nas220> "
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" neo 0.02"
CONFIG_4xx=y
CONFIG_TARGET_NEO=y
CONFIG_FIT=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_NET2BIG_V2=y
+CONFIG_IDENT_STRING=" 2Big v2"
CONFIG_SYS_EXTRA_OPTIONS="NET2BIG_V2"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_NETSPACE_V2=y
+CONFIG_IDENT_STRING=" NS v2 Lite"
CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_LITE_V2"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_NETSPACE_V2=y
+CONFIG_IDENT_STRING=" NS Max v2"
CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MAX_V2"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_NETSPACE_V2=y
+CONFIG_IDENT_STRING=" NS v2 Mini"
CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MINI_V2"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_NETSPACE_V2=y
+CONFIG_IDENT_STRING=" NS v2"
CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_V2"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_ARCH_MESON=y
CONFIG_MESON_GXBB=y
CONFIG_TARGET_ODROID_C2=y
+CONFIG_IDENT_STRING=" odroid-c2"
CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-odroidc2"
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BDI is not set
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
+CONFIG_IDENT_STRING=" for ODROID-XU3"
CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_FIT=y
CONFIG_ARM=y
CONFIG_OMAP34XX=y
+# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_TARGET_OMAP3_EVM=y
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
-# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="OMAP3_EVM # "
# CONFIG_CMD_IMI is not set
CONFIG_ARM=y
CONFIG_OMAP34XX=y
+# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_TARGET_TAO3530=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BOARD_OMAP3_HA"
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
-# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_OMAP54XX=y
-CONFIG_TARGET_OMAP5_UEVM=y
-CONFIG_SPL=y
# CONFIG_SPL_NAND_SUPPORT is not set
+CONFIG_TARGET_OMAP5_UEVM=y
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_OPENRD=y
+CONFIG_IDENT_STRING="\nOpenRD-Base"
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_BASE"
CONFIG_BOOTDELAY=3
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_OPENRD=y
+CONFIG_IDENT_STRING="\nOpenRD-Client"
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_CLIENT"
CONFIG_BOOTDELAY=3
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_OPENRD=y
+CONFIG_IDENT_STRING="\nOpenRD-Ultimate"
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_ULTIMATE"
CONFIG_BOOTDELAY=3
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
+CONFIG_SPL_I2C_SUPPORT=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881979
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus2e"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SYS_EXTRA_OPTIONS="MACPWR=SUNXI_GPD(6)"
+CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS4=y
CONFIG_TARGET_ORIGEN=y
+CONFIG_IDENT_STRING=" for ORIGEN"
CONFIG_DEFAULT_DEVICE_TREE="exynos4210-origen"
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_ETH_SUPPORT=y
-CONFIG_SPL_NET_VCI_STRING="pcm051 U-Boot SPL"
CONFIG_SPL_NET_SUPPORT=y
+CONFIG_SPL_NET_VCI_STRING="pcm051 U-Boot SPL"
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_ETH_SUPPORT=y
-CONFIG_SPL_NET_VCI_STRING="pcm051 U-Boot SPL"
CONFIG_SPL_NET_SUPPORT=y
+CONFIG_SPL_NET_VCI_STRING="pcm051 U-Boot SPL"
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_PEACH_PI=y
+CONFIG_IDENT_STRING=" for Peach-Pi"
CONFIG_DEFAULT_DEVICE_TREE="exynos5800-peach-pi"
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_PEACH_PIT=y
+CONFIG_IDENT_STRING=" for Peach-Pit"
CONFIG_DEFAULT_DEVICE_TREE="exynos5420-peach-pit"
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_SPL=y
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="pepper# "
CONFIG_CMD_BOOTZ=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_POGO_E02=y
+CONFIG_IDENT_STRING="\nPogo E02"
CONFIG_BOOTDELAY=3
CONFIG_SYS_PROMPT="PogoE02> "
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_KM_KIRKWOOD=y
+CONFIG_IDENT_STRING="\nKeymile Port-L2"
CONFIG_SYS_EXTRA_OPTIONS="KM_PORTL2"
CONFIG_VERSION_VARIABLE=y
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_TARGET_SHEEVAPLUG=y
+CONFIG_IDENT_STRING="\nMarvell-Sheevaplug"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="at91sam9260-smartweb"
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260"
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_AUTOBOOT_KEYED=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_SMDK5250=y
+CONFIG_IDENT_STRING=" for SMDK5250"
CONFIG_DEFAULT_DEVICE_TREE="exynos5250-smdk5250"
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_SMDK5420=y
+CONFIG_IDENT_STRING=" for SMDK5420"
CONFIG_DEFAULT_DEVICE_TREE="exynos5420-smdk5420"
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_ARM=y
CONFIG_ARCH_S5PC1XX=y
CONFIG_TARGET_SMDKC100=y
+CONFIG_IDENT_STRING=" for SMDKC100"
CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS4=y
+CONFIG_IDENT_STRING=" for SMDKC210/V310"
CONFIG_DEFAULT_DEVICE_TREE="exynos4210-smdkv310"
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_OMAP34XX=y
-CONFIG_TARGET_SNIPER=y
-CONFIG_SPL=y
# CONFIG_SPL_EXT_SUPPORT is not set
# CONFIG_SPL_NAND_SUPPORT is not set
+CONFIG_TARGET_SNIPER=y
+CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="sniper # "
CONFIG_CMD_BOOTZ=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_SNOW=y
+CONFIG_IDENT_STRING=" for snow"
CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow"
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR300=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR300"
CONFIG_BOOTDELAY=1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR300=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR300,NAND"
CONFIG_BOOTDELAY=1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR300=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR300,USBTTY"
CONFIG_BOOTDELAY=-1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR300=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR300,USBTTY,NAND"
CONFIG_BOOTDELAY=-1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR310=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR310"
CONFIG_BOOTDELAY=1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR310=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR310,NAND"
CONFIG_BOOTDELAY=1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR310=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR310,FLASH_PNOR"
CONFIG_BOOTDELAY=1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR310=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR310,USBTTY"
CONFIG_BOOTDELAY=-1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR310=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR310,USBTTY,NAND"
CONFIG_BOOTDELAY=-1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR310=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR310,USBTTY,FLASH_PNOR"
CONFIG_BOOTDELAY=-1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR320=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR320"
CONFIG_BOOTDELAY=1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR320=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,NAND"
CONFIG_BOOTDELAY=1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR320=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,FLASH_PNOR"
CONFIG_BOOTDELAY=1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR320=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,USBTTY"
CONFIG_BOOTDELAY=-1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR320=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,USBTTY,NAND"
CONFIG_BOOTDELAY=-1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR320=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,USBTTY,FLASH_PNOR"
CONFIG_BOOTDELAY=-1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR600=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR600"
CONFIG_BOOTDELAY=1
CONFIG_AUTOBOOT_KEYED=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR600=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR600,NAND"
CONFIG_BOOTDELAY=1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR600=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR600,USBTTY"
CONFIG_BOOTDELAY=-1
CONFIG_CMD_I2C=y
CONFIG_ARM=y
CONFIG_TARGET_SPEAR600=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR600,USBTTY,NAND"
CONFIG_BOOTDELAY=-1
CONFIG_CMD_I2C=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_SPRING=y
+CONFIG_IDENT_STRING=" for spring"
CONFIG_DEFAULT_DEVICE_TREE="exynos5250-spring"
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" strider con 0.01"
CONFIG_MPC83xx=y
CONFIG_TARGET_STRIDER=y
CONFIG_FIT=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" strider con dp 0.01"
CONFIG_MPC83xx=y
CONFIG_TARGET_STRIDER=y
CONFIG_FIT=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" strider cpu 0.01"
CONFIG_MPC83xx=y
CONFIG_TARGET_STRIDER=y
CONFIG_FIT=y
CONFIG_PPC=y
+CONFIG_IDENT_STRING=" strider cpu dp 0.01"
CONFIG_MPC83xx=y
CONFIG_TARGET_STRIDER=y
CONFIG_FIT=y
CONFIG_ARM=y
CONFIG_OMAP34XX=y
+# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_TARGET_TAO3530=y
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
-# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="TAO-3530 # "
# CONFIG_CMD_IMI is not set
CONFIG_ARC=y
CONFIG_TARGET_TB100=y
CONFIG_SYS_CLK_FREQ=500000000
-CONFIG_DM_SERIAL=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_DEFAULT_DEVICE_TREE="abilis_tb100"
CONFIG_BOOTDELAY=3
CONFIG_ARM=y
CONFIG_TARGET_THUNDERX_88XX=y
+CONFIG_IDENT_STRING=" for Cavium Thunder CN88XX ARM v8 Multi-Core"
CONFIG_DEFAULT_DEVICE_TREE="thunderx-88xx"
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_OMAP34XX=y
+# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_TARGET_TWISTER=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
-# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="twister => "
# CONFIG_CMD_IMLS is not set
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_USB=y
-CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_STORAGE=y
CONFIG_ARM=y
CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_IDENT_STRING=" vexpress_aemv8a"
CONFIG_BOOTDELAY=1
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="VExpress64# "
CONFIG_ARM=y
CONFIG_TARGET_VEXPRESS64_JUNO=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_IDENT_STRING=" vexpress_aemv8a"
CONFIG_BOOTDELAY=1
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="VExpress64# "
CONFIG_ARM=y
CONFIG_TARGET_VEXPRESS64_BASE_FVP=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_IDENT_STRING=" vexpress_aemv8a"
CONFIG_BOOTDELAY=1
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="VExpress64# "
CONFIG_ARM=y
CONFIG_ARCH_MX7=y
CONFIG_TARGET_WARP7=y
+CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
# CONFIG_ARMV7_VIRT is not set
CONFIG_IMX_RDC=y
CONFIG_IMX_BOOTAUX=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_MXC_USB_OTG_HACTIVE=y
CONFIG_USB_GADGET=y
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="FSL"
CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
-CONFIG_USB_EHCI_HCD=y
-CONFIG_MXC_USB_OTG_HACTIVE=y
CONFIG_OF_LIBFDT=y
-CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_IDENT_STRING="-SPEAr"
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_ZYNQMP_USB=y
+CONFIG_IDENT_STRING=" Xilinx ZynqMP ZC1751 xm015 dc1"
CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm015-dc1"
CONFIG_FIT=y
CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zc1751_xm016_dc2"
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_MALLOC_F_LEN=0x8000
+# CONFIG_SPL_FAT_SUPPORT is not set
+# CONFIG_SPL_LIBDISK_SUPPORT is not set
+# CONFIG_SPL_MMC_SUPPORT is not set
CONFIG_ZYNQMP_USB=y
+CONFIG_IDENT_STRING=" Xilinx ZynqMP ZC1751 xm016 dc2"
CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm016-dc2"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL=y
-# CONFIG_SPL_FAT_SUPPORT is not set
-# CONFIG_SPL_LIBDISK_SUPPORT is not set
-# CONFIG_SPL_MMC_SUPPORT is not set
-# CONFIG_SPL_FLASH_SUPPORT is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ZynqMP> "
CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zc1751_xm018_dc4"
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_IDENT_STRING=" Xilinx ZynqMP ZC1751 xm018 dc4"
CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm018-dc4"
CONFIG_FIT=y
CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zc1751_xm019_dc5"
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_IDENT_STRING=" Xilinx ZynqMP ZC1751 xm019 dc5"
CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm019-dc5"
CONFIG_FIT=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_ZYNQMP_USB=y
+CONFIG_IDENT_STRING=" Xilinx ZynqMP ZCU102"
CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102"
CONFIG_FIT=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_ZYNQMP_USB=y
+CONFIG_IDENT_STRING=" Xilinx ZynqMP ZCU102"
CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-revB"
CONFIG_FIT=y
* (easy to change)
***********************************************************/
#define CONFIG_405GP 1 /* This is a PPC405 CPU */
-#define CONFIG_MIP405 1 /* ...on a MIP405 board */
#define CONFIG_SYS_TEXT_BASE 0xFFF80000
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_BSP
-#if !defined(CONFIG_MIP405T)
-#endif
-
/**************************************************************
* I2C Stuff:
* the MIP405 is equiped with an Atmel 24C128/256 EEPROM at address
/************************************************************
* IDE/ATA stuff
************************************************************/
-#if defined(CONFIG_MIP405T)
+#if defined(CONFIG_TARGET_MIP405T)
#define CONFIG_SYS_IDE_MAXBUS 1 /* MIP405T has only one IDE bus */
#else
#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */
/************************************************************
* USB support EXPERIMENTAL
************************************************************/
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
#define CONFIG_USB_UHCI
#define CONFIG_USB_KEYBOARD
************************************************************/
#define CONFIG_BZIP2 1
-/************************************************************
- * Ident
- ************************************************************/
-
-#define VERSION_TAG "released"
-#if !defined(CONFIG_MIP405T)
-#define CONFIG_ISO_STRING "MEV-10072-001"
-#else
-#define CONFIG_ISO_STRING "MEV-10082-001"
-#endif
-
-#if !defined(CONFIG_BOOT_PCI)
-#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
-#else
-#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, PCI_BOOT Version"
-#endif
-
#endif /* __CONFIG_H */
*/
#define CONFIG_SYS_DER 0x00000000
-#define VERSION_TAG "released"
-#define CONFIG_ISO_STRING "MEV-10084-001"
-
-#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
-
#endif /* __CONFIG_H */
************************************************************/
#define CONFIG_BZIP2 1
-/************************************************************
- * Ident
- ************************************************************/
-#define VERSION_TAG "released"
-#define CONFIG_ISO_STRING "MEV-10066-001"
-#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
-
#endif /* __CONFIG_H */
#define CONFIG_LZO
#define CONFIG_LZMA
-/* Ident */
-/*#define VERSION_TAG "released"*/
-#define VERSION_TAG "unstable"
-#define CONFIG_IDENT_STRING "\n(c) 2003 - 2011 by MPL AG Switzerland, " \
- "MEV-10080-001 " VERSION_TAG
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
#define __CONFIG_H
#define CONFIG_ENV_VERSION 10
-#define CONFIG_IDENT_STRING " apf27 patch 3.10"
#define CONFIG_BOARD_NAME apf27
/*
/* Miscellaneous configurable options */
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
-#define CONFIG_IDENT_STRING " for ARNDALE"
-
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
#ifndef __CONFIG_ASPENITE_H
#define __CONFIG_ASPENITE_H
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nMarvell-Aspenite DB"
-
/*
* High Level Configuration Options
*/
#define CONFIG_ENABLE_36BIT_PHYS
#define CONFIG_FSL_LAW /* Use common FSL init code */
-#ifdef CONFIG_TRAILBLAZER
-#define CONFIG_IDENT_STRING " controlcenterd trailblazer 0.01"
-#else
-#define CONFIG_IDENT_STRING " controlcenterd 0.01"
-#endif
-
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_ADDR_MAP
#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME dlvsion-10g
-#define CONFIG_IDENT_STRING " dlvision-10g 0.06"
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME dlvision
-#define CONFIG_IDENT_STRING " dlvision 0.02"
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */
*/
#define MACH_TYPE_DNS325 3800
#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
-#define CONFIG_IDENT_STRING "\nD-Link DNS-325"
/*
* High Level Configuration Options (easy to change)
#ifndef _CONFIG_DOCKSTAR_H
#define _CONFIG_DOCKSTAR_H
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nSeagate FreeAgent DockStar"
-
/*
* High Level Configuration Options (easy to change)
*/
#include <linux/sizes.h>
#include <asm/arch/sysmap-apq8016.h>
-#define CONFIG_IDENT_STRING "\nQualcomm-DragonBoard 410C"
-
#define CONFIG_MISC_INIT_R /* To stop autoboot */
/* Physical Memory Map */
#define MACH_TYPE_DREAMPLUG 3550
#endif
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nMarvell-DreamPlug"
-
/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_SYS_UBOOT_START 0x00800000
#define CONFIG_SYS_TEXT_BASE 0x00800000
-/*
- * Version number information
- */
-
-#define CONFIG_IDENT_STRING " EDMiniV2"
-
/*
* High Level Configuration Options (easy to change)
*/
/* select serial console configuration */
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
-#define CONFIG_IDENT_STRING " for ESPRESSO7420"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
/* DRAM Memory Banks */
#ifndef _CONFIG_GOFLEXHOME_H
#define _CONFIG_GOFLEXHOME_H
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nSeagate GoFlex Home"
-
/*
* High Level Configuration Options (easy to change)
*/
#define MACH_TYPE_SHEEVAD 2625
#endif
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nMarvell-gplugD"
-
/*
* High Level Configuration Options
*/
/* no DDR2 Controller */
#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
-/* Identification string */
-#define CONFIG_IDENT_STRING " Gaisler LEON3 GR-CPCI-AX2000"
-
/* default kernel command line */
#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
/* no DDR2 Controller */
#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
-/* Identification string */
-#define CONFIG_IDENT_STRING " Gaisler LEON3 EP2S60"
-
/* default kernel command line */
#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
/* no DDR2 Controller */
#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
-/* Identification string */
-#define CONFIG_IDENT_STRING " Gaisler LEON3 GR-XC3S-1500"
-
/* default kernel command line */
#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
/* default kernel command line */
#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
-#define CONFIG_IDENT_STRING " Gaisler GRSIM"
-
/* TSIM command:
* $ ./tsim-leon3 -mmu -cas
*
/* default kernel command line */
#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
-#define CONFIG_IDENT_STRING " Gaisler GRSIM LEON2"
-
#endif /* __CONFIG_H */
#ifndef _CONFIG_GURUPLUG_H
#define _CONFIG_GURUPLUG_H
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nMarvell-GuruPlug"
-
/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_SUPPORT_RAW_INITRD
-#define CONFIG_IDENT_STRING "hikey"
-
#define CONFIG_BOARD_EARLY_INIT_F
/* Physical Memory Map */
#define CONFIG_SYS_TEXT_BASE 0xFE000000
-#ifdef CONFIG_HRCON_DH
-#define CONFIG_IDENT_STRING " hrcon dh 0.01"
-#else
-#define CONFIG_IDENT_STRING " hrcon 0.01"
-#endif
-
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_LAST_STAGE_INIT
#ifndef _CONFIG_IB62x0_H
#define _CONFIG_IB62x0_H
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING " RaidSonic ICY BOX IB-NAS62x0"
-
/*
* High level configuration options
*/
#ifndef _CONFIG_ICONNECT_H
#define _CONFIG_ICONNECT_H
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING " Iomega iConnect"
-
/*
* High level configuration options
*/
#define CONFIG_460EX 1 /* Specific PPC460EX */
#ifdef CONFIG_DEVCONCENTER
#define CONFIG_HOSTNAME devconcenter
-#define CONFIG_IDENT_STRING " devconcenter 0.06"
#else
#define CONFIG_HOSTNAME intip
-#define CONFIG_IDENT_STRING " intip 0.06"
#endif
#define CONFIG_440 1
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME io
-#define CONFIG_IDENT_STRING " io 0.06"
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME io64
-#define CONFIG_IDENT_STRING " io64 0.02"
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME iocon
-#define CONFIG_IDENT_STRING " iocon 0.06"
#include "amcc-common.h"
/* Reclaim some space. */
/* KM_KIRKWOOD */
#if defined(CONFIG_KM_KIRKWOOD)
-#define CONFIG_IDENT_STRING "\nKeymile Kirkwood"
#define CONFIG_HOSTNAME km_kirkwood
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
/* KM_KIRKWOOD_PCI */
#elif defined(CONFIG_KM_KIRKWOOD_PCI)
-#define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI"
#define CONFIG_HOSTNAME km_kirkwood_pci
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_FPGA_CONFIG
/* KM_KIRKWOOD_128M16 */
#elif defined(CONFIG_KM_KIRKWOOD_128M16)
-#define CONFIG_IDENT_STRING "\nKeymile Kirkwood 128M16"
#define CONFIG_HOSTNAME km_kirkwood_128m16
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
# if defined(CONFIG_KM_NUSA)
-#define CONFIG_IDENT_STRING "\nKeymile NUSA"
#define CONFIG_HOSTNAME kmnusa
# elif defined(CONFIG_KM_SUGP1)
-#define CONFIG_IDENT_STRING "\nKeymile SUGP1"
#define CONFIG_HOSTNAME kmsugp1
#define KM_PCIE_RESET_MPP7
#endif
/* KM_MGCOGE3UN */
#elif defined(CONFIG_KM_MGCOGE3UN)
-#define CONFIG_IDENT_STRING "\nKeymile COGE3UN"
#define CONFIG_HOSTNAME mgcoge3un
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#undef CONFIG_SYS_KWD_CONFIG
/* KMCOGE5UN */
#elif defined(CONFIG_KM_COGE5UN)
-#define CONFIG_IDENT_STRING "\nKeymile COGE5UN"
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
/* KM_PORTL2 */
#elif defined(CONFIG_KM_PORTL2)
-#define CONFIG_IDENT_STRING "\nKeymile Port-L2"
#define CONFIG_HOSTNAME portl2
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_PIGGY4_88E6061
/* KM_SUV31 */
#elif defined(CONFIG_KM_SUV31)
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
-#define CONFIG_IDENT_STRING "\nKeymile SUV31"
#define CONFIG_HOSTNAME kmsuv31
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
*/
#if defined(CONFIG_INETSPACE_V2)
#define CONFIG_MACH_TYPE MACH_TYPE_INETSPACE_V2
-#define CONFIG_IDENT_STRING " IS v2"
#elif defined(CONFIG_NETSPACE_V2)
#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_V2
-#define CONFIG_IDENT_STRING " NS v2"
#elif defined(CONFIG_NETSPACE_LITE_V2)
#define MACH_TYPE_NETSPACE_LITE_V2 2983 /* missing in mach-types.h */
#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_LITE_V2
-#define CONFIG_IDENT_STRING " NS v2 Lite"
#elif defined(CONFIG_NETSPACE_MINI_V2)
#define MACH_TYPE_NETSPACE_MINI_V2 2831 /* missing in mach-types.h */
#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MINI_V2
-#define CONFIG_IDENT_STRING " NS v2 Mini"
#elif defined(CONFIG_NETSPACE_MAX_V2)
#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2
-#define CONFIG_IDENT_STRING " NS Max v2"
#elif defined(CONFIG_D2NET_V2)
#define CONFIG_MACH_TYPE MACH_TYPE_D2NET_V2
-#define CONFIG_IDENT_STRING " D2 v2"
#elif defined(CONFIG_NET2BIG_V2)
#define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2
-#define CONFIG_IDENT_STRING " 2Big v2"
#else
#error "Unknown board"
#endif
#include "ls2080a_common.h"
-#define CONFIG_IDENT_STRING " LS2080A-EMU"
-
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 133333333
#include "ls2080a_common.h"
-#define CONFIG_IDENT_STRING " LS2080A-SIMU"
-
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 133333333
* Version number information
*/
#if defined(CONFIG_LSCHLV2)
-#define CONFIG_IDENT_STRING " LS-CHLv2"
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
#define CONFIG_MACH_TYPE 3006
#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
#elif defined(CONFIG_LSXHL)
-#define CONFIG_IDENT_STRING " LS-XHL"
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
#define CONFIG_MACH_TYPE 2663
/* CONFIG_SYS_TCLK is 200000000 by default */
#ifndef __CONFIG_H
#define __CONFIG_H
-/*
- * Liebherr extra version info
- */
-#define CONFIG_IDENT_STRING " - v2.0"
-
/*
* High Level Configuration Options
*/
*/
#define MACH_TYPE_NAS220 MACH_TYPE_RD88F6192_NAS
#define CONFIG_MACH_TYPE MACH_TYPE_NAS220
-#define CONFIG_IDENT_STRING "\nNAS 220"
/*
* High Level Configuration Options (easy to change)
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME neo
-#define CONFIG_IDENT_STRING " neo 0.02"
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_IDENT_STRING " odroid-c2"
-
/* Serial setup */
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 115200
#include <configs/exynos5-common.h>
#undef CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_IDENT_STRING " for ODROID-XU3"
#define CONFIG_BOARD_COMMON
#ifndef _CONFIG_OPENRD_H
#define _CONFIG_OPENRD_H
-/*
- * Version number information
- */
-#ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
-# define CONFIG_IDENT_STRING "\nOpenRD-Ultimate"
-#else
-# ifdef CONFIG_BOARD_IS_OPENRD_CLIENT
-# define CONFIG_IDENT_STRING "\nOpenRD-Client"
-# else
-# ifdef CONFIG_BOARD_IS_OPENRD_BASE
-# define CONFIG_IDENT_STRING "\nOpenRD-Base"
-# else
-# error Unknown OpenRD board specified
-# endif
-# endif
-#endif
-
/*
* High Level Configuration Options (easy to change)
*/
"fi;" \
"load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} "
-#define CONFIG_IDENT_STRING " for ORIGEN"
-
#define CONFIG_CLK_1000_400_200
/* MIU (Memory Interleaving Unit) */
#define CONFIG_SERIAL3 /* use SERIAL 3 */
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
-#define CONFIG_IDENT_STRING " for Peach-Pi"
-
/* Display */
#define CONFIG_LCD
#ifdef CONFIG_LCD
#define CONFIG_SERIAL3 /* use SERIAL 3 */
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
-#define CONFIG_IDENT_STRING " for Peach-Pit"
-
/* DRAM Memory Banks */
#define CONFIG_NR_DRAM_BANKS 4
#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */
*/
#define MACH_TYPE_POGO_E02 3542
#define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02
-#define CONFIG_IDENT_STRING "\nPogo E02"
/*
* High Level Configuration Options (easy to change)
#ifndef _CONFIG_SHEEVAPLUG_H
#define _CONFIG_SHEEVAPLUG_H
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug"
-
/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_BOARD_COMMON
-#define CONFIG_IDENT_STRING " for SMDK5250"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
#endif /* __CONFIG_SMDK_H */
#define CONFIG_SERIAL3 /* use SERIAL 3 */
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
-#define CONFIG_IDENT_STRING " for SMDK5420"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
/* USB */
#define CONFIG_SYS_NO_FLASH 1
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */
-#define CONFIG_IDENT_STRING " for SMDKC100"
#if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000)
#define CONFIG_ENABLE_MMU
#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
/* FLASH and environment organization */
-#define CONFIG_IDENT_STRING " for SMDKC210/V310"
#define CONFIG_CLK_1000_400_200
#define CONFIG_BOARD_COMMON
-#define CONFIG_IDENT_STRING " for snow"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
#endif /* __CONFIG_SNOW_H */
#define CONFIG_SYS_MEMTEST_START 0x00800000
#define CONFIG_SYS_MEMTEST_END 0x04000000
#define CONFIG_SYS_MALLOC_LEN (1024*1024)
-#define CONFIG_IDENT_STRING "-SPEAr"
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_BOARD_COMMON
-#define CONFIG_IDENT_STRING " for spring"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
#endif /* __CONFIG_SPRING_H */
#define CONFIG_SYS_TEXT_BASE 0xFE000000
-#ifdef CONFIG_STRIDER_CPU_DP
-#define CONFIG_IDENT_STRING " strider cpu dp 0.01"
-#elif defined(CONFIG_STRIDER_CPU)
-#define CONFIG_IDENT_STRING " strider cpu 0.01"
-#elif defined(CONFIG_STRIDER_CON_DP)
-#define CONFIG_IDENT_STRING " strider con dp 0.01"
-#else
-#define CONFIG_IDENT_STRING " strider con 0.01"
-#endif
-
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_LAST_STAGE_INIT
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */
-#define CONFIG_IDENT_STRING " Allwinner Technology"
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_IDENT_STRING \
- " for Cavium Thunder CN88XX ARM v8 Multi-Core"
-
#define MEM_BASE 0x00500000
#define CONFIG_SYS_LOWMEM_BASE MEM_BASE
#define CONFIG_SUPPORT_RAW_INITRD
-#define CONFIG_IDENT_STRING " vexpress_aemv8a"
-
/* Link Definitions */
#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
#define CONFIG_SYS_MEMTEST_START 0x00800000
#define CONFIG_SYS_MEMTEST_END 0x04000000
#define CONFIG_SYS_MALLOC_LEN (8 << 20)
-#define CONFIG_IDENT_STRING "-SPEAr"
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
/* Have release address at the end of 256MB for now */
#define CPU_RELEASE_ADDR 0xFFFFFF0
-#if !defined(CONFIG_IDENT_STRING)
-# define CONFIG_IDENT_STRING " Xilinx ZynqMP"
-#endif
-
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
#define CONFIG_AHCI
#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR}
-#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm015 dc1"
-
#include <configs/xilinx_zynqmp.h>
#endif /* __CONFIG_ZYNQMP_ZC1751_XM015_DC1_H */
#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB1_XHCI_BASEADDR}
-#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm016 dc2"
-
#include <configs/xilinx_zynqmp.h>
#endif /* __CONFIG_ZYNQMP_ZC1751_XM016_DC2_H */
#ifndef __CONFIG_ZYNQMP_ZC1751_XM018_DC4_H
#define __CONFIG_ZYNQMP_ZC1751_XM018_DC4_H
-#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm018 dc4"
-
#include <configs/xilinx_zynqmp.h>
#endif /* __CONFIG_ZYNQMP_ZC1751_XM018_DC4_H */
#define CONFIG_ZYNQ_SDHCI0
-#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm019 dc5"
-
#include <configs/xilinx_zynqmp.h>
#endif /* __CONFIG_ZYNQMP_ZC1751_XM019_DC5_H */
#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR}
-#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZCU102"
-
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_CMD_EEPROM
#define CONFIG_ZYNQ_EEPROM_BUS 5
#include "generated/version_autogenerated.h"
#endif
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
#define U_BOOT_VERSION_STRING U_BOOT_VERSION " (" U_BOOT_DATE " - " \
U_BOOT_TIME " " U_BOOT_TZ ")" CONFIG_IDENT_STRING
}
%}
+%typemap(in) (const void *) {
+ if (!PyByteArray_Check($input)) {
+ SWIG_exception_fail(SWIG_TypeError, "in method '" "$symname" "', argument "
+ "$argnum"" of type '" "$type""'");
+ }
+ $1 = (void *) PyByteArray_AsString($input);
+}
+
const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen);
int fdt_path_offset(const void *fdt, const char *path);
int fdt_first_property_offset(const void *fdt, int nodeoffset);
const char *fdt_string(const void *fdt, int stroffset);
int fdt_first_subnode(const void *fdt, int offset);
int fdt_next_subnode(const void *fdt, int offset);
+
+%typemap(in) (void *) {
+ if (!PyByteArray_Check($input)) {
+ SWIG_exception_fail(SWIG_TypeError, "in method '" "$symname" "', argument "
+ "$argnum"" of type '" "$type""'");
+ }
+ $1 = PyByteArray_AsString($input);
+}
+
+int fdt_delprop(void *fdt, int nodeoffset, const char *name);
+
+const char *fdt_strerror(int errval);
+int fdt_pack(void *fdt);
+
+int fdt_totalsize(const void *fdt);
+int fdt_off_dt_struct(const void *fdt);
CONFIG_IRAM_TOP
CONFIG_IRDA_BASE
CONFIG_ISO_PARTITION
-CONFIG_ISO_STRING
CONFIG_ISP1362_USB
CONFIG_IS_
CONFIG_IS_BUILTIN
CONFIG_MII_INIT
CONFIG_MII_SUPPRESS_PREAMBLE
CONFIG_MINIFAP
-CONFIG_MIP405
-CONFIG_MIP405T
CONFIG_MIPS_HUGE_TLB_SUPPORT
CONFIG_MIPS_MT_FPAFF
CONFIG_MIRQ_EN
options.step = len(series.commits) - 1
gnu_make = command.Output(os.path.join(options.git,
- 'scripts/show-gnu-make')).rstrip()
+ 'scripts/show-gnu-make'), raise_on_error=False).rstrip()
if not gnu_make:
sys.exit('GNU Make not found')
import copy
from optparse import OptionError, OptionParser
import os
+import struct
import sys
-import fdt_util
-
# Bring in the patman libraries
our_path = os.path.dirname(os.path.realpath(__file__))
sys.path.append(os.path.join(our_path, '../patman'))
-# Bring in either the normal fdt library (which relies on libfdt) or the
-# fallback one (which uses fdtget and is slower). Both provide the same
-# interfface for this file to use.
-try:
- from fdt import Fdt
- import fdt
- have_libfdt = True
-except ImportError:
- have_libfdt = False
- from fdt_fallback import Fdt
- import fdt_fallback as fdt
-
-import struct
+import fdt
+import fdt_select
+import fdt_util
# When we see these properties we ignore them - i.e. do not create a structure member
PROP_IGNORE_LIST = [
# C type declarations for the tyues we support
TYPE_NAMES = {
- fdt_util.TYPE_INT: 'fdt32_t',
- fdt_util.TYPE_BYTE: 'unsigned char',
- fdt_util.TYPE_STRING: 'const char *',
- fdt_util.TYPE_BOOL: 'bool',
+ fdt.TYPE_INT: 'fdt32_t',
+ fdt.TYPE_BYTE: 'unsigned char',
+ fdt.TYPE_STRING: 'const char *',
+ fdt.TYPE_BOOL: 'bool',
};
STRUCT_PREFIX = 'dtd_'
type: Data type (fdt_util)
value: Data value, as a string of bytes
"""
- if type == fdt_util.TYPE_INT:
+ if type == fdt.TYPE_INT:
return '%#x' % fdt_util.fdt32_to_cpu(value)
- elif type == fdt_util.TYPE_BYTE:
+ elif type == fdt.TYPE_BYTE:
return '%#x' % ord(value[0])
- elif type == fdt_util.TYPE_STRING:
+ elif type == fdt.TYPE_STRING:
return '"%s"' % value
- elif type == fdt_util.TYPE_BOOL:
+ elif type == fdt.TYPE_BOOL:
return 'true'
def GetCompatName(self, node):
Once this is done, self.fdt.GetRoot() can be called to obtain the
device tree root node, and progress from there.
"""
- self.fdt = Fdt(self._dtb_fname)
- self.fdt.Scan()
+ self.fdt = fdt_select.FdtScan(self._dtb_fname)
def ScanTree(self):
"""Scan the device tree for useful information
# SPDX-License-Identifier: GPL-2.0+
#
-import fdt_util
-import libfdt
+import struct
import sys
-# This deals with a device tree, presenting it as a list of Node and Prop
-# objects, representing nodes and properties, respectively.
-#
-# This implementation uses a libfdt Python library to access the device tree,
-# so it is fairly efficient.
+import fdt_util
+
+# This deals with a device tree, presenting it as an assortment of Node and
+# Prop objects, representing nodes and properties, respectively. This file
+# contains the base classes and defines the high-level API. Most of the
+# implementation is in the FdtFallback and FdtNormal subclasses. See
+# fdt_select.py for how to create an Fdt object.
+
+# A list of types we support
+(TYPE_BYTE, TYPE_INT, TYPE_STRING, TYPE_BOOL) = range(4)
-class Prop:
+def CheckErr(errnum, msg):
+ if errnum:
+ raise ValueError('Error %d: %s: %s' %
+ (errnum, libfdt.fdt_strerror(errnum), msg))
+
+class PropBase:
"""A device tree property
Properties:
bytes
type: Value type
"""
- def __init__(self, name, bytes):
+ def __init__(self, node, offset, name):
+ self._node = node
+ self._offset = offset
self.name = name
self.value = None
- if not bytes:
- self.type = fdt_util.TYPE_BOOL
- self.value = True
- return
- self.type, self.value = fdt_util.BytesToValue(bytes)
def GetPhandle(self):
"""Get a (single) phandle value from a property
self.value = [self.value]
if type(self.value) == list and len(newprop.value) > len(self.value):
- val = fdt_util.GetEmpty(self.type)
+ val = self.GetEmpty(self.type)
while len(self.value) < len(newprop.value):
self.value.append(val)
+ def BytesToValue(self, bytes):
+ """Converts a string of bytes into a type and value
+
+ Args:
+ A string containing bytes
+
+ Return:
+ A tuple:
+ Type of data
+ Data, either a single element or a list of elements. Each element
+ is one of:
+ TYPE_STRING: string value from the property
+ TYPE_INT: a byte-swapped integer stored as a 4-byte string
+ TYPE_BYTE: a byte stored as a single-byte string
+ """
+ size = len(bytes)
+ strings = bytes.split('\0')
+ is_string = True
+ count = len(strings) - 1
+ if count > 0 and not strings[-1]:
+ for string in strings[:-1]:
+ if not string:
+ is_string = False
+ break
+ for ch in string:
+ if ch < ' ' or ch > '~':
+ is_string = False
+ break
+ else:
+ is_string = False
+ if is_string:
+ if count == 1:
+ return TYPE_STRING, strings[0]
+ else:
+ return TYPE_STRING, strings[:-1]
+ if size % 4:
+ if size == 1:
+ return TYPE_BYTE, bytes[0]
+ else:
+ return TYPE_BYTE, list(bytes)
+ val = []
+ for i in range(0, size, 4):
+ val.append(bytes[i:i + 4])
+ if size == 4:
+ return TYPE_INT, val[0]
+ else:
+ return TYPE_INT, val
+
+ def GetEmpty(self, type):
+ """Get an empty / zero value of the given type
+
+ Returns:
+ A single value of the given type
+ """
+ if type == TYPE_BYTE:
+ return chr(0)
+ elif type == TYPE_INT:
+ return struct.pack('<I', 0);
+ elif type == TYPE_STRING:
+ return ''
+ else:
+ return True
+
+ def GetOffset(self):
+ """Get the offset of a property
+
+ This can be implemented by subclasses.
+
+ Returns:
+ The offset of the property (struct fdt_property) within the
+ file, or None if not known.
+ """
+ return None
-class Node:
+class NodeBase:
"""A device tree node
Properties:
Keyed by property name
"""
def __init__(self, fdt, offset, name, path):
- self.offset = offset
+ self._fdt = fdt
+ self._offset = offset
self.name = name
self.path = path
- self._fdt = fdt
self.subnodes = []
self.props = {}
+ def _FindNode(self, name):
+ """Find a node given its name
+
+ Args:
+ name: Node name to look for
+ Returns:
+ Node object if found, else None
+ """
+ for subnode in self.subnodes:
+ if subnode.name == name:
+ return subnode
+ return None
+
def Scan(self):
- """Scan a node's properties and subnodes
+ """Scan the subnodes of a node
- This fills in the props and subnodes properties, recursively
- searching into subnodes so that the entire tree is built.
+ This should be implemented by subclasses
"""
- self.props = self._fdt.GetProps(self.path)
+ raise NotImplementedError()
- offset = libfdt.fdt_first_subnode(self._fdt.GetFdt(), self.offset)
- while offset >= 0:
- sep = '' if self.path[-1] == '/' else '/'
- name = libfdt.Name(self._fdt.GetFdt(), offset)
- path = self.path + sep + name
- node = Node(self._fdt, offset, name, path)
- self.subnodes.append(node)
+ def DeleteProp(self, prop_name):
+ """Delete a property of a node
- node.Scan()
- offset = libfdt.fdt_next_subnode(self._fdt.GetFdt(), offset)
+ This should be implemented by subclasses
+ Args:
+ prop_name: Name of the property to delete
+ """
+ raise NotImplementedError()
class Fdt:
"""Provides simple access to a flat device tree blob.
fname: Filename of fdt
_root: Root of device tree (a Node object)
"""
-
def __init__(self, fname):
- self.fname = fname
- with open(fname) as fd:
- self._fdt = fd.read()
-
- def GetFdt(self):
- """Get the contents of the FDT
+ self._fname = fname
- Returns:
- The FDT contents as a string of bytes
- """
- return self._fdt
-
- def Scan(self):
+ def Scan(self, root='/'):
"""Scan a device tree, building up a tree of Node objects
This fills in the self._root property
+
+ Args:
+ root: Ignored
+
+ TODO(sjg@chromium.org): Implement the 'root' parameter
"""
- self._root = Node(self, 0, '/', '/')
+ self._root = self.Node(self, 0, '/', '/')
self._root.Scan()
def GetRoot(self):
"""
return self._root
- def GetProps(self, node):
- """Get all properties from a node.
+ def GetNode(self, path):
+ """Look up a node from its path
Args:
- node: Full path to node name to look in.
-
+ path: Path to look up, e.g. '/microcode/update@0'
Returns:
- A dictionary containing all the properties, indexed by node name.
- The entries are Prop objects.
+ Node object, or None if not found
+ """
+ node = self._root
+ for part in path.split('/')[1:]:
+ node = node._FindNode(part)
+ if not node:
+ return None
+ return node
+
+ def Flush(self):
+ """Flush device tree changes back to the file
+
+ If the device tree has changed in memory, write it back to the file.
+ Subclasses can implement this if needed.
+ """
+ pass
+
+ def Pack(self):
+ """Pack the device tree down to its minimum size
- Raises:
- ValueError: if the node does not exist.
+ When nodes and properties shrink or are deleted, wasted space can
+ build up in the device tree binary. Subclasses can implement this
+ to remove that spare space.
"""
- offset = libfdt.fdt_path_offset(self._fdt, node)
- if offset < 0:
- libfdt.Raise(offset)
- props_dict = {}
- poffset = libfdt.fdt_first_property_offset(self._fdt, offset)
- while poffset >= 0:
- dprop, plen = libfdt.fdt_get_property_by_offset(self._fdt, poffset)
- prop = Prop(libfdt.String(self._fdt, dprop.nameoff), libfdt.Data(dprop))
- props_dict[prop.name] = prop
-
- poffset = libfdt.fdt_next_property_offset(self._fdt, poffset)
- return props_dict
+ pass
#
import command
+import fdt
+from fdt import Fdt, NodeBase, PropBase
import fdt_util
import sys
# is not very efficient for larger trees. The tool is called once for each
# node and property in the tree.
-class Prop:
+class Prop(PropBase):
"""A device tree property
Properties:
bytes
type: Value type
"""
- def __init__(self, name, byte_list_str):
- self.name = name
- self.value = None
+ def __init__(self, node, name, byte_list_str):
+ PropBase.__init__(self, node, 0, name)
if not byte_list_str.strip():
- self.type = fdt_util.TYPE_BOOL
+ self.type = fdt.TYPE_BOOL
return
- bytes = [chr(int(byte, 16)) for byte in byte_list_str.strip().split(' ')]
- self.type, self.value = fdt_util.BytesToValue(''.join(bytes))
+ self.bytes = [chr(int(byte, 16))
+ for byte in byte_list_str.strip().split(' ')]
+ self.type, self.value = self.BytesToValue(''.join(self.bytes))
- def GetPhandle(self):
- """Get a (single) phandle value from a property
- Gets the phandle valuie from a property and returns it as an integer
- """
- return fdt_util.fdt32_to_cpu(self.value[:4])
-
- def Widen(self, newprop):
- """Figure out which property type is more general
-
- Given a current property and a new property, this function returns the
- one that is less specific as to type. The less specific property will
- be ble to represent the data in the more specific property. This is
- used for things like:
-
- node1 {
- compatible = "fred";
- value = <1>;
- };
- node1 {
- compatible = "fred";
- value = <1 2>;
- };
-
- He we want to use an int array for 'value'. The first property
- suggests that a single int is enough, but the second one shows that
- it is not. Calling this function with these two propertes would
- update the current property to be like the second, since it is less
- specific.
- """
- if newprop.type < self.type:
- self.type = newprop.type
-
- if type(newprop.value) == list and type(self.value) != list:
- self.value = newprop.value
-
- if type(self.value) == list and len(newprop.value) > len(self.value):
- val = fdt_util.GetEmpty(self.type)
- while len(self.value) < len(newprop.value):
- self.value.append(val)
-
-
-class Node:
+class Node(NodeBase):
"""A device tree node
Properties:
props: A dict of properties for this node, each a Prop object.
Keyed by property name
"""
- def __init__(self, fdt, name, path):
- self.name = name
- self.path = path
- self._fdt = fdt
- self.subnodes = []
- self.props = {}
+ def __init__(self, fdt, offset, name, path):
+ NodeBase.__init__(self, fdt, offset, name, path)
def Scan(self):
"""Scan a node's properties and subnodes
searching into subnodes so that the entire tree is built.
"""
for name, byte_list_str in self._fdt.GetProps(self.path).iteritems():
- prop = Prop(name, byte_list_str)
+ prop = Prop(self, name, byte_list_str)
self.props[name] = prop
for name in self._fdt.GetSubNodes(self.path):
sep = '' if self.path[-1] == '/' else '/'
path = self.path + sep + name
- node = Node(self._fdt, name, path)
+ node = Node(self._fdt, 0, name, path)
self.subnodes.append(node)
node.Scan()
+ def DeleteProp(self, prop_name):
+ """Delete a property of a node
-class Fdt:
- """Provides simple access to a flat device tree blob.
+ The property is deleted using fdtput.
+
+ Args:
+ prop_name: Name of the property to delete
+ Raises:
+ CommandError if the property does not exist
+ """
+ args = [self._fdt._fname, '-d', self.path, prop_name]
+ command.Output('fdtput', *args)
+ del self.props[prop_name]
+
+class FdtFallback(Fdt):
+ """Provides simple access to a flat device tree blob using fdtget/fdtput
Properties:
- fname: Filename of fdt
- _root: Root of device tree (a Node object)
+ See superclass
"""
def __init__(self, fname):
- self.fname = fname
-
- def Scan(self):
- """Scan a device tree, building up a tree of Node objects
-
- This fills in the self._root property
- """
- self._root = Node(self, '/', '/')
- self._root.Scan()
-
- def GetRoot(self):
- """Get the root Node of the device tree
-
- Returns:
- The root Node object
- """
- return self._root
+ Fdt.__init__(self, fname)
+ if self._fname:
+ self._fname = fdt_util.EnsureCompiled(self._fname)
def GetSubNodes(self, node):
"""Returns a list of sub-nodes of a given node
Raises:
CmdError: if the node does not exist.
"""
- out = command.Output('fdtget', self.fname, '-l', node)
+ out = command.Output('fdtget', self._fname, '-l', node)
return out.strip().splitlines()
- def GetProps(self, node, convert_dashes=False):
+ def GetProps(self, node):
"""Get all properties from a node
Args:
node: full path to node name to look in
- convert_dashes: True to convert - to _ in node names
Returns:
A dictionary containing all the properties, indexed by node name.
Raises:
CmdError: if the node does not exist.
"""
- out = command.Output('fdtget', self.fname, node, '-p')
+ out = command.Output('fdtget', self._fname, node, '-p')
props = out.strip().splitlines()
props_dict = {}
for prop in props:
name = prop
- if convert_dashes:
- prop = re.sub('-', '_', prop)
props_dict[prop] = self.GetProp(node, name)
return props_dict
Raises:
CmdError: if the property does not exist and no default is provided.
"""
- args = [self.fname, node, prop, '-t', 'bx']
+ args = [self._fname, node, prop, '-t', 'bx']
if default is not None:
args += ['-d', str(default)]
if typespec is not None:
args += ['-t%s' % typespec]
out = command.Output('fdtget', *args)
return out.strip()
+
+ @classmethod
+ def Node(self, fdt, offset, name, path):
+ """Create a new node
+
+ This is used by Fdt.Scan() to create a new node using the correct
+ class.
+
+ Args:
+ fdt: Fdt object
+ offset: Offset of node
+ name: Node name
+ path: Full path to node
+ """
+ node = Node(fdt, offset, name, path)
+ return node
--- /dev/null
+#!/usr/bin/python
+#
+# Copyright (C) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+import struct
+import sys
+
+import fdt
+from fdt import Fdt, NodeBase, PropBase
+import fdt_util
+import libfdt
+
+# This deals with a device tree, presenting it as a list of Node and Prop
+# objects, representing nodes and properties, respectively.
+#
+# This implementation uses a libfdt Python library to access the device tree,
+# so it is fairly efficient.
+
+def CheckErr(errnum, msg):
+ if errnum:
+ raise ValueError('Error %d: %s: %s' %
+ (errnum, libfdt.fdt_strerror(errnum), msg))
+
+class Prop(PropBase):
+ """A device tree property
+
+ Properties:
+ name: Property name (as per the device tree)
+ value: Property value as a string of bytes, or a list of strings of
+ bytes
+ type: Value type
+ """
+ def __init__(self, node, offset, name, bytes):
+ PropBase.__init__(self, node, offset, name)
+ self.bytes = bytes
+ if not bytes:
+ self.type = fdt.TYPE_BOOL
+ self.value = True
+ return
+ self.type, self.value = self.BytesToValue(bytes)
+
+ def GetOffset(self):
+ """Get the offset of a property
+
+ Returns:
+ The offset of the property (struct fdt_property) within the file
+ """
+ return self._node._fdt.GetStructOffset(self._offset)
+
+class Node(NodeBase):
+ """A device tree node
+
+ Properties:
+ offset: Integer offset in the device tree
+ name: Device tree node tname
+ path: Full path to node, along with the node name itself
+ _fdt: Device tree object
+ subnodes: A list of subnodes for this node, each a Node object
+ props: A dict of properties for this node, each a Prop object.
+ Keyed by property name
+ """
+ def __init__(self, fdt, offset, name, path):
+ NodeBase.__init__(self, fdt, offset, name, path)
+
+ def Offset(self):
+ """Returns the offset of a node, after checking the cache
+
+ This should be used instead of self._offset directly, to ensure that
+ the cache does not contain invalid offsets.
+ """
+ self._fdt.CheckCache()
+ return self._offset
+
+ def Scan(self):
+ """Scan a node's properties and subnodes
+
+ This fills in the props and subnodes properties, recursively
+ searching into subnodes so that the entire tree is built.
+ """
+ self.props = self._fdt.GetProps(self, self.path)
+
+ offset = libfdt.fdt_first_subnode(self._fdt.GetFdt(), self.Offset())
+ while offset >= 0:
+ sep = '' if self.path[-1] == '/' else '/'
+ name = libfdt.Name(self._fdt.GetFdt(), offset)
+ path = self.path + sep + name
+ node = Node(self._fdt, offset, name, path)
+ self.subnodes.append(node)
+
+ node.Scan()
+ offset = libfdt.fdt_next_subnode(self._fdt.GetFdt(), offset)
+
+ def Refresh(self, my_offset):
+ """Fix up the _offset for each node, recursively
+
+ Note: This does not take account of property offsets - these will not
+ be updated.
+ """
+ if self._offset != my_offset:
+ #print '%s: %d -> %d\n' % (self.path, self._offset, my_offset)
+ self._offset = my_offset
+ offset = libfdt.fdt_first_subnode(self._fdt.GetFdt(), self._offset)
+ for subnode in self.subnodes:
+ subnode.Refresh(offset)
+ offset = libfdt.fdt_next_subnode(self._fdt.GetFdt(), offset)
+
+ def DeleteProp(self, prop_name):
+ """Delete a property of a node
+
+ The property is deleted and the offset cache is invalidated.
+
+ Args:
+ prop_name: Name of the property to delete
+ Raises:
+ ValueError if the property does not exist
+ """
+ CheckErr(libfdt.fdt_delprop(self._fdt.GetFdt(), self.Offset(), prop_name),
+ "Node '%s': delete property: '%s'" % (self.path, prop_name))
+ del self.props[prop_name]
+ self._fdt.Invalidate()
+
+class FdtNormal(Fdt):
+ """Provides simple access to a flat device tree blob using libfdt.
+
+ Properties:
+ _fdt: Device tree contents (bytearray)
+ _cached_offsets: True if all the nodes have a valid _offset property,
+ False if something has changed to invalidate the offsets
+ """
+ def __init__(self, fname):
+ Fdt.__init__(self, fname)
+ self._cached_offsets = False
+ if self._fname:
+ self._fname = fdt_util.EnsureCompiled(self._fname)
+
+ with open(self._fname) as fd:
+ self._fdt = bytearray(fd.read())
+
+ def GetFdt(self):
+ """Get the contents of the FDT
+
+ Returns:
+ The FDT contents as a string of bytes
+ """
+ return self._fdt
+
+ def Flush(self):
+ """Flush device tree changes back to the file"""
+ with open(self._fname, 'wb') as fd:
+ fd.write(self._fdt)
+
+ def Pack(self):
+ """Pack the device tree down to its minimum size"""
+ CheckErr(libfdt.fdt_pack(self._fdt), 'pack')
+ fdt_len = libfdt.fdt_totalsize(self._fdt)
+ del self._fdt[fdt_len:]
+
+ def GetProps(self, node, path):
+ """Get all properties from a node.
+
+ Args:
+ node: Full path to node name to look in.
+
+ Returns:
+ A dictionary containing all the properties, indexed by node name.
+ The entries are Prop objects.
+
+ Raises:
+ ValueError: if the node does not exist.
+ """
+ offset = libfdt.fdt_path_offset(self._fdt, path)
+ if offset < 0:
+ libfdt.Raise(offset)
+ props_dict = {}
+ poffset = libfdt.fdt_first_property_offset(self._fdt, offset)
+ while poffset >= 0:
+ dprop, plen = libfdt.fdt_get_property_by_offset(self._fdt, poffset)
+ prop = Prop(node, poffset, libfdt.String(self._fdt, dprop.nameoff),
+ libfdt.Data(dprop))
+ props_dict[prop.name] = prop
+
+ poffset = libfdt.fdt_next_property_offset(self._fdt, poffset)
+ return props_dict
+
+ def Invalidate(self):
+ """Mark our offset cache as invalid"""
+ self._cached_offsets = False
+
+ def CheckCache(self):
+ """Refresh the offset cache if needed"""
+ if self._cached_offsets:
+ return
+ self.Refresh()
+ self._cached_offsets = True
+
+ def Refresh(self):
+ """Refresh the offset cache"""
+ self._root.Refresh(0)
+
+ def GetStructOffset(self, offset):
+ """Get the file offset of a given struct offset
+
+ Args:
+ offset: Offset within the 'struct' region of the device tree
+ Returns:
+ Position of @offset within the device tree binary
+ """
+ return libfdt.fdt_off_dt_struct(self._fdt) + offset
+
+ @classmethod
+ def Node(self, fdt, offset, name, path):
+ """Create a new node
+
+ This is used by Fdt.Scan() to create a new node using the correct
+ class.
+
+ Args:
+ fdt: Fdt object
+ offset: Offset of node
+ name: Node name
+ path: Full path to node
+ """
+ node = Node(fdt, offset, name, path)
+ return node
--- /dev/null
+#!/usr/bin/python
+#
+# Copyright (C) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+# Bring in either the normal fdt library (which relies on libfdt) or the
+# fallback one (which uses fdtget and is slower). Both provide the same
+# interface for this file to use.
+try:
+ import fdt_normal
+ have_libfdt = True
+except ImportError:
+ have_libfdt = False
+ import fdt_fallback
+
+def FdtScan(fname):
+ """Returns a new Fdt object from the implementation we are using"""
+ if have_libfdt:
+ dtb = fdt_normal.FdtNormal(fname)
+ else:
+ dtb = fdt_fallback.FdtFallback(fname)
+ dtb.Scan()
+ return dtb
# SPDX-License-Identifier: GPL-2.0+
#
+import os
import struct
+import tempfile
-# A list of types we support
-(TYPE_BYTE, TYPE_INT, TYPE_STRING, TYPE_BOOL) = range(4)
+import command
+import tools
-def BytesToValue(bytes):
- """Converts a string of bytes into a type and value
+def fdt32_to_cpu(val):
+ """Convert a device tree cell to an integer
Args:
- A string containing bytes
+ Value to convert (4-character string representing the cell value)
Return:
- A tuple:
- Type of data
- Data, either a single element or a list of elements. Each element
- is one of:
- TYPE_STRING: string value from the property
- TYPE_INT: a byte-swapped integer stored as a 4-byte string
- TYPE_BYTE: a byte stored as a single-byte string
+ A native-endian integer value
"""
- size = len(bytes)
- strings = bytes.split('\0')
- is_string = True
- count = len(strings) - 1
- if count > 0 and not strings[-1]:
- for string in strings[:-1]:
- if not string:
- is_string = False
- break
- for ch in string:
- if ch < ' ' or ch > '~':
- is_string = False
- break
- else:
- is_string = False
- if is_string:
- if count == 1:
- return TYPE_STRING, strings[0]
- else:
- return TYPE_STRING, strings[:-1]
- if size % 4:
- if size == 1:
- return TYPE_BYTE, bytes[0]
- else:
- return TYPE_BYTE, list(bytes)
- val = []
- for i in range(0, size, 4):
- val.append(bytes[i:i + 4])
- if size == 4:
- return TYPE_INT, val[0]
- else:
- return TYPE_INT, val
+ return struct.unpack('>I', val)[0]
-def GetEmpty(type):
- """Get an empty / zero value of the given type
+def EnsureCompiled(fname):
+ """Compile an fdt .dts source file into a .dtb binary blob if needed.
+
+ Args:
+ fname: Filename (if .dts it will be compiled). It not it will be
+ left alone
Returns:
- A single value of the given type
+ Filename of resulting .dtb file
"""
- if type == TYPE_BYTE:
- return chr(0)
- elif type == TYPE_INT:
- return struct.pack('<I', 0);
- elif type == TYPE_STRING:
- return ''
- else:
- return True
+ _, ext = os.path.splitext(fname)
+ if ext != '.dts':
+ return fname
-def fdt32_to_cpu(val):
- """Convert a device tree cell to an integer
+ dts_input = tools.GetOutputFilename('source.dts')
+ dtb_output = tools.GetOutputFilename('source.dtb')
- Args:
- Value to convert (4-character string representing the cell value)
+ search_paths = [os.path.join(os.getcwd(), 'include')]
+ root, _ = os.path.splitext(fname)
+ args = ['-E', '-P', '-x', 'assembler-with-cpp', '-D__ASSEMBLY__']
+ args += ['-Ulinux']
+ for path in search_paths:
+ args.extend(['-I', path])
+ args += ['-o', dts_input, fname]
+ command.Run('cc', *args)
- Return:
- A native-endian integer value
- """
- return struct.unpack(">I", val)[0]
+ # If we don't have a directory, put it in the tools tempdir
+ search_list = []
+ for path in search_paths:
+ search_list.extend(['-i', path])
+ args = ['-I', 'dts', '-o', dtb_output, '-O', 'dtb']
+ args.extend(search_list)
+ args.append(dts_input)
+ command.Run('dtc', *args)
+ return dtb_output
+
+def GetInt(node, propname, default=None):
+ prop = node.props.get(propname)
+ if not prop:
+ return default
+ value = fdt32_to_cpu(prop.value)
+ if type(value) == type(list):
+ raise ValueError("Node '%s' property '%' has list value: expecting"
+ "a single integer" % (node.name, propname))
+ return value
+
+def GetString(node, propname, default=None):
+ prop = node.props.get(propname)
+ if not prop:
+ return default
+ value = prop.value
+ if type(value) == type(list):
+ raise ValueError("Node '%s' property '%' has list value: expecting"
+ "a single string" % (node.name, propname))
+ return value
+
+def GetBool(node, propname, default=False):
+ if propname in node.props:
+ return True
+ return default
result.problems = []
chk = FindCheckPatch()
item = {}
- result.stdout = command.Output(chk, '--no-tree', fname)
+ result.stdout = command.Output(chk, '--no-tree', fname,
+ raise_on_error=False)
#pipe = subprocess.Popen(cmd, stdout=subprocess.PIPE)
#stdout, stderr = pipe.communicate()
raise Exception("Error running '%s'" % user_pipestr)
return result
-def Output(*cmd):
- return RunPipe([cmd], capture=True, raise_on_error=False).stdout
+def Output(*cmd, **kwargs):
+ raise_on_error = kwargs.get('raise_on_error', True)
+ return RunPipe([cmd], capture=True, raise_on_error=raise_on_error).stdout
def OutputOneLine(*cmd, **kwargs):
raise_on_error = kwargs.pop('raise_on_error', True)
"""
to = BuildEmailList(series.get('to'), '--to', alias, raise_on_error)
if not to:
- git_config_to = command.Output('git', 'config', 'sendemail.to')
+ git_config_to = command.Output('git', 'config', 'sendemail.to',
+ raise_on_error=False)
if not git_config_to:
print ("No recipient.\n"
"Please add something like this to a commit\n"
--- /dev/null
+#
+# Copyright (c) 2016 Google, Inc
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+import os
+import shutil
+import tempfile
+
+import tout
+
+outdir = None
+indirs = None
+preserve_outdir = False
+
+def PrepareOutputDir(dirname, preserve=False):
+ """Select an output directory, ensuring it exists.
+
+ This either creates a temporary directory or checks that the one supplied
+ by the user is valid. For a temporary directory, it makes a note to
+ remove it later if required.
+
+ Args:
+ dirname: a string, name of the output directory to use to store
+ intermediate and output files. If is None - create a temporary
+ directory.
+ preserve: a Boolean. If outdir above is None and preserve is False, the
+ created temporary directory will be destroyed on exit.
+
+ Raises:
+ OSError: If it cannot create the output directory.
+ """
+ global outdir, preserve_outdir
+
+ preserve_outdir = dirname or preserve
+ if dirname:
+ outdir = dirname
+ if not os.path.isdir(outdir):
+ try:
+ os.makedirs(outdir)
+ except OSError as err:
+ raise CmdError("Cannot make output directory '%s': '%s'" %
+ (outdir, err.strerror))
+ tout.Debug("Using output directory '%s'" % outdir)
+ else:
+ outdir = tempfile.mkdtemp(prefix='binman.')
+ tout.Debug("Using temporary directory '%s'" % outdir)
+
+def _RemoveOutputDir():
+ global outdir
+
+ shutil.rmtree(outdir)
+ tout.Debug("Deleted temporary directory '%s'" % outdir)
+ outdir = None
+
+def FinaliseOutputDir():
+ global outdir, preserve_outdir
+
+ """Tidy up: delete output directory if temporary and not preserved."""
+ if outdir and not preserve_outdir:
+ _RemoveOutputDir()
+
+def GetOutputFilename(fname):
+ """Return a filename within the output directory.
+
+ Args:
+ fname: Filename to use for new file
+
+ Returns:
+ The full path of the filename, within the output directory
+ """
+ return os.path.join(outdir, fname)
+
+def _FinaliseForTest():
+ """Remove the output directory (for use by tests)"""
+ global outdir
+
+ if outdir:
+ _RemoveOutputDir()
+
+def SetInputDirs(dirname):
+ """Add a list of input directories, where input files are kept.
+
+ Args:
+ dirname: a list of paths to input directories to use for obtaining
+ files needed by binman to place in the image.
+ """
+ global indir
+
+ indir = dirname
+ tout.Debug("Using input directories %s" % indir)
+
+def GetInputFilename(fname):
+ """Return a filename for use as input.
+
+ Args:
+ fname: Filename to use for new file
+
+ Returns:
+ The full path of the filename, within the input directory
+ """
+ if not indir:
+ return fname
+ for dirname in indir:
+ pathname = os.path.join(dirname, fname)
+ if os.path.exists(pathname):
+ return pathname
+
+ raise ValueError("Filename '%s' not found in input path (%s)" %
+ (fname, ','.join(indir)))
+
+def Align(pos, align):
+ if align:
+ mask = align - 1
+ pos = (pos + mask) & ~mask
+ return pos
+
+def NotPowerOfTwo(num):
+ return num and (num & (num - 1))
--- /dev/null
+# Copyright (c) 2016 Google, Inc
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Terminal output logging.
+#
+
+import sys
+
+import terminal
+
+# Output verbosity levels that we support
+ERROR = 0
+WARNING = 1
+NOTICE = 2
+INFO = 3
+DEBUG = 4
+
+"""
+This class handles output of progress and other useful information
+to the user. It provides for simple verbosity level control and can
+output nothing but errors at verbosity zero.
+
+The idea is that modules set up an Output object early in their years and pass
+it around to other modules that need it. This keeps the output under control
+of a single class.
+
+Public properties:
+ verbose: Verbosity level: 0=silent, 1=progress, 3=full, 4=debug
+"""
+def __enter__():
+ return
+
+def __exit__(unused1, unused2, unused3):
+ """Clean up and remove any progress message."""
+ ClearProgress()
+ return False
+
+def UserIsPresent():
+ """This returns True if it is likely that a user is present.
+
+ Sometimes we want to prompt the user, but if no one is there then this
+ is a waste of time, and may lock a script which should otherwise fail.
+
+ Returns:
+ True if it thinks the user is there, and False otherwise
+ """
+ return stdout_is_tty and verbose > 0
+
+def ClearProgress():
+ """Clear any active progress message on the terminal."""
+ if verbose > 0 and stdout_is_tty:
+ _stdout.write('\r%s\r' % (" " * len (_progress)))
+ _stdout.flush()
+
+def Progress(msg, warning=False, trailer='...'):
+ """Display progress information.
+
+ Args:
+ msg: Message to display.
+ warning: True if this is a warning."""
+ ClearProgress()
+ if verbose > 0:
+ _progress = msg + trailer
+ if stdout_is_tty:
+ col = _color.YELLOW if warning else _color.GREEN
+ _stdout.write('\r' + _color.Color(col, _progress))
+ _stdout.flush()
+ else:
+ _stdout.write(_progress + '\n')
+
+def _Output(level, msg, color=None):
+ """Output a message to the terminal.
+
+ Args:
+ level: Verbosity level for this message. It will only be displayed if
+ this as high as the currently selected level.
+ msg; Message to display.
+ error: True if this is an error message, else False.
+ """
+ if verbose >= level:
+ ClearProgress()
+ if color:
+ msg = _color.Color(color, msg)
+ _stdout.write(msg + '\n')
+
+def DoOutput(level, msg):
+ """Output a message to the terminal.
+
+ Args:
+ level: Verbosity level for this message. It will only be displayed if
+ this as high as the currently selected level.
+ msg; Message to display.
+ """
+ _Output(level, msg)
+
+def Error(msg):
+ """Display an error message
+
+ Args:
+ msg; Message to display.
+ """
+ _Output(0, msg, _color.RED)
+
+def Warning(msg):
+ """Display a warning message
+
+ Args:
+ msg; Message to display.
+ """
+ _Output(1, msg, _color.YELLOW)
+
+def Notice(msg):
+ """Display an important infomation message
+
+ Args:
+ msg; Message to display.
+ """
+ _Output(2, msg)
+
+def Info(msg):
+ """Display an infomation message
+
+ Args:
+ msg; Message to display.
+ """
+ _Output(3, msg)
+
+def Debug(msg):
+ """Display a debug message
+
+ Args:
+ msg; Message to display.
+ """
+ _Output(4, msg)
+
+def UserOutput(msg):
+ """Display a message regardless of the current output level.
+
+ This is used when the output was specifically requested by the user.
+ Args:
+ msg; Message to display.
+ """
+ _Output(0, msg)
+
+def Init(_verbose=WARNING, stdout=sys.stdout):
+ """Initialize a new output object.
+
+ Args:
+ verbose: Verbosity level (0-4).
+ stdout: File to use for stdout.
+ """
+ global verbose, _progress, _color, _stdout, stdout_is_tty
+
+ verbose = _verbose
+ _progress = '' # Our last progress message
+ _color = terminal.Color()
+ _stdout = stdout
+
+ # TODO(sjg): Move this into Chromite libraries when we have them
+ stdout_is_tty = hasattr(sys.stdout, 'isatty') and sys.stdout.isatty()
+
+def Uninit():
+ ClearProgress()
+
+Init()
projects / u-boot / commitdiff