mecp5200 MPC5200
pf5200 MPC5200
+ caddy2 MPC8349
vme8349 MPC8349
CPCI750 PPC750FX/GX
#########################################################################
LIST_83xx=" \
+ caddy2 \
kmeter1 \
MPC8313ERDB_33 \
MPC8313ERDB_NAND_66 \
MPC8315ERDB \
+ MPC8315ERDB_NAND \
MPC8323ERDB \
MPC832XEMDS \
MPC832XEMDS_ATM \
echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
fi ;
+MPC8315ERDB_NAND_config \
MPC8315ERDB_config: unconfig
- @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
+ @if [ "$(findstring _NAND_,$@)" ] ; then \
+ ln -sf mpc8313erdb nand_spl/board/freescale/mpc8315erdb ; \
+ fi ;
+ @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
MPC8323ERDB_config: unconfig
@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
TQM834x_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
+caddy2_config \
vme8349_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx vme8349 esd
+ @$(MKCONFIG) -t $(@:_config=) vme8349 ppc mpc83xx vme8349 esd
#########################################################################
## MPC85xx Systems
static struct pci_controller pcie1_hose;
#endif
-int first_free_busno=0;
-
-void
-pci_init_board(void)
+void pci_init_board(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ struct fsl_pci_info pci_info[3];
+ u32 devdisr, pordevsr, io_sel;
+ u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
+ int first_free_busno = 0;
+ int num = 0;
+
+ int pcie_ep, pcie_configured;
- uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+ devdisr = in_be32(&gur->devdisr);
+ pordevsr = in_be32(&gur->pordevsr);
+ porpllsr = in_be32(&gur->porpllsr);
+ io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
- devdisr, io_sel, host_agent);
+ debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
/* explicitly set 'Clock out select register' to echo SYSCLK input to our CPLD */
- gur->clkocr |= MPC85xx_ATUM_CLKOCR;
+ setbits_be32(&gur->clkocr, MPC85xx_ATUM_CLKOCR);
if (io_sel & 1) {
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
}
#ifdef CONFIG_PCIE1
- {
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
- struct pci_controller *hose = &pcie1_hose;
- int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
- int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
- struct pci_region *r = hose->regions;
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE1 connected to slot as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
- }
- printf ("\n");
-
+ SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
+#ifdef CONFIG_SYS_PCIE1_MEM_BUS2
/* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_MEM_BASE,
- CONFIG_SYS_PCIE1_MEM_PHYS,
- CONFIG_SYS_PCIE1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_IO_BASE,
- CONFIG_SYS_PCIE1_IO_PHYS,
- CONFIG_SYS_PCIE1_IO_SIZE,
- PCI_REGION_IO);
-
-#ifdef CONFIG_SYS_PCIE1_MEM_BASE2
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_MEM_BASE2,
+ pci_set_region(&pcie1_hose.regions[0],
+ CONFIG_SYS_PCIE1_MEM_BUS2,
CONFIG_SYS_PCIE1_MEM_PHYS2,
CONFIG_SYS_PCIE1_MEM_SIZE2,
PCI_REGION_MEM);
-#endif
- hose->region_count = r - hose->regions;
- hose->first_busno=first_free_busno;
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- first_free_busno=hose->last_busno+1;
- printf(" PCIE1 on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
+ pcie1_hose.region_count = 1;
+#endif
+ printf (" PCIE1 connected to Slot as %s (base addr %lx)\n",
+ pcie_ep ? "End Point" : "Root Complex",
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie1_hose, first_free_busno);
} else {
printf (" PCIE1: disabled\n");
}
- }
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
#endif
#ifdef CONFIG_PCI1
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
- struct pci_controller *hose = &pci1_hose;
- struct pci_region *r = hose->regions;
-
- uint pci_agent = is_fsl_pci_agent(LAW_TRGT_IF_PCI_1, host_agent);
- uint pci_speed = 33333000; /*get_clock_freq (); PCI PSPEED in [4:5] */
- uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */
- uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */
- uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */
+ pci_speed = 33333000; /*get_clock_freq (); PCI PSPEED in [4:5] */
+ pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */
+ pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+ pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
- printf ("\n PCI1: %d bit, %s MHz, %s, %s, %s (base address %x)\n",
+ SET_STD_PCI_INFO(pci_info[num], 1);
+ pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
+ printf ("\n PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333000) ? "33" :
(pci_speed == 66666000) ? "66" : "unknown",
pci_clk_sel ? "sync" : "async",
pci_agent ? "agent" : "host",
pci_arb ? "arbiter" : "external-arbiter",
- (uint)pci
- );
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BASE,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
+ pci_info[num].regs);
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BASE,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
- PCI_REGION_IO);
- hose->region_count = r - hose->regions;
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- first_free_busno=hose->last_busno+1;
- printf ("PCI1 on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pci1_hose, first_free_busno);
} else {
- printf (" PCI1: disabled\n");
+ printf (" PCI: disabled\n");
}
-}
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
#endif
#ifdef CONFIG_PCI2
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
- struct pci_controller *hose = &pci2_hose;
- struct pci_region *r = hose->regions;
-
if (!(devdisr & MPC85xx_DEVDISR_PCI2)) {
- pci_set_region(r++,
- CONFIG_SYS_PCI2_MEM_BASE,
- CONFIG_SYS_PCI2_MEM_PHYS,
- CONFIG_SYS_PCI2_MEM_SIZE,
- PCI_REGION_MEM);
+ SET_STD_PCI_INFO(pci_info[num], 2);
+ pci_agent = fsl_setup_hose(&pci2_hose, pci_info[num].regs);
- pci_set_region(r++,
- CONFIG_SYS_PCI2_IO_BASE,
- CONFIG_SYS_PCI2_IO_PHYS,
- CONFIG_SYS_PCI2_IO_SIZE,
- PCI_REGION_IO);
- hose->region_count = r - hose->regions;
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- first_free_busno=hose->last_busno+1;
- printf ("PCI2 on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
+ puts (" PCI2\n");
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pci1_hose, first_free_busno);
} else {
printf (" PCI2: disabled\n");
}
-}
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCI2;
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */
#endif
}
{ pinmux[9], 2, 4 }
};
+/* USB0_DRVVBUS pin muxer settings */
+const struct pinmux_config usb_pins[] = {
+ { pinmux[9], 1, 1 }
+};
+
int board_init(void)
{
#ifndef CONFIG_USE_IRQ
if (davinci_configure_pin_mux(i2c_pins, ARRAY_SIZE(i2c_pins)) != 0)
return 1;
+ if (davinci_configure_pin_mux(usb_pins, ARRAY_SIZE(usb_pins)) != 0)
+ return 1;
+
/* enable the console UART */
writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
DAVINCI_UART_PWREMU_MGMT_UTRST),
* pci.c -- esd VME8349 PCI board support.
* Copyright (c) 2006 Wind River Systems, Inc.
* Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 esd gmbh.
+ *
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
*
* Based on MPC8349 PCI support but w/o PIB related code.
*
#include <pci.h>
#include <i2c.h>
#include <asm/fsl_i2c.h>
+#include "vme8349pin.h"
DECLARE_GLOBAL_DATA_PTR;
udelay(2000);
/*
- * Assert/deassert PCI reset
+ * Assert/deassert VME reset
*/
- setbits_be32(&immr->gpio[0].dat, 0x00800000);
- setbits_be32(&immr->gpio[0].dir, 0x00800000);
- setbits_be32(&immr->gpio[1].dir, 0x08800000);
+ clrsetbits_be32(&immr->gpio[1].dat,
+ GPIO2_TSI_POWERUP_RESET_N | GPIO2_TSI_PLL_RESET_N,
+ GPIO2_VME_RESET_N | GPIO2_L_RESET_EN_N);
+ setbits_be32(&immr->gpio[1].dir, GPIO2_TSI_PLL_RESET_N |
+ GPIO2_TSI_POWERUP_RESET_N |
+ GPIO2_VME_RESET_N |
+ GPIO2_L_RESET_EN_N);
+ clrbits_be32(&immr->gpio[1].dir, GPIO2_V_SCON);
udelay(200);
- setbits_be32(&immr->gpio[1].dat, 0x08000000);
+ setbits_be32(&immr->gpio[1].dat, GPIO2_TSI_PLL_RESET_N);
udelay(200);
- setbits_be32(&immr->gpio[1].dat, 0x08800000);
+ setbits_be32(&immr->gpio[1].dat, GPIO2_TSI_POWERUP_RESET_N);
udelay(600000);
- clrbits_be32(&immr->gpio[1].dat, 0x00100000);
+ clrbits_be32(&immr->gpio[1].dat, GPIO2_L_RESET_EN_N);
/* Configure PCI Local Access Windows */
pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
udelay(2000);
- if (monarch == 0)
+ if (monarch == 0) {
mpc83xx_pci_init(1, reg, 0);
+ } else {
+ /*
+ * Release PCI RST Output signal
+ */
+ out_be32(&immr->pci_ctrl[0].gcr, 0);
+ udelay(2000);
+ out_be32(&immr->pci_ctrl[0].gcr, 1);
+ }
}
#endif
#include <asm/io.h>
#include <asm/mmu.h>
+#include <spd.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include <netdev.h>
void ddr_enable_ecc(unsigned int dram_size);
-int fixed_sdram(void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- u32 msize = 0;
- u32 ddr_size;
- u32 ddr_size_log2;
-
- msize = CONFIG_SYS_DDR_SIZE;
- for (ddr_size = msize << 20, ddr_size_log2 = 0;
- (ddr_size > 1);
- ddr_size = ddr_size>>1, ddr_size_log2++) {
- if (ddr_size & 1)
- return -1;
- }
-
- im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
- im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) &
- LAWAR_SIZE);
-
-#if (CONFIG_SYS_DDR_SIZE == 512)
- im->ddr.csbnds[0].csbnds = 0x0000001f;
-#else
-#warning Currently any DDR size other than 512MiB is not supported
-#endif
- im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG | 0x00330000;
-
- /* currently we use only one CS, so disable the other banks */
- im->ddr.csbnds[1].csbnds = 0x00000000;
- im->ddr.csbnds[2].csbnds = 0x00000000;
- im->ddr.csbnds[3].csbnds = 0x00000000;
- im->ddr.cs_config[1] = 0;
- im->ddr.cs_config[2] = 0;
- im->ddr.cs_config[3] = 0;
-
- im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
- im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
- im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
- im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
-
- im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
- im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
- im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
- im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
-
- im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
- sync();
- udelay(200);
-
- /* enable DDR controller */
- im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-
- return msize;
-}
-
phys_size_t initdram(int board_type)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
return -1;
- /* DDR SDRAM - Main SODIMM */
+ /* DDR SDRAM - Main memory */
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
- msize = fixed_sdram();
+ msize = spd_sdram();
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
int checkboard(void)
{
- puts("Board: esd VME8349\n");
+#ifdef VME_CADDY2
+ puts("Board: esd VME-CADDY/2\n");
+#else
+ puts("Board: esd VME-CPU/8349\n");
+#endif
return 0;
}
+#ifdef VME_CADDY2
+int board_eth_init(bd_t *bis)
+{
+ return pci_eth_init(bis);
+}
+#endif
+
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
}
#endif
+
+int misc_init_r()
+{
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+
+ clrsetbits_be32(&im->lbus.lcrr, LBCR_LDIS, 0);
+
+ return 0;
+}
+
+/*
+ * Provide SPD values for spd_sdram(). Both boards (VME-CADDY/2
+ * and VME-CADDY/2) have different SDRAM configurations.
+ */
+#ifdef VME_CADDY2
+#define SMALL_RAM 0xff
+#define LARGE_RAM 0x00
+#else
+#define SMALL_RAM 0x00
+#define LARGE_RAM 0xff
+#endif
+
+#define SPD_VAL(a, b) (((a) & SMALL_RAM) | ((b) & LARGE_RAM))
+
+static spd_eeprom_t default_spd_eeprom = {
+ SPD_VAL(0x80, 0x80), /* 00 use 128 Bytes */
+ SPD_VAL(0x07, 0x07), /* 01 use 128 Bytes */
+ SPD_MEMTYPE_DDR2, /* 02 type is DDR2 */
+ SPD_VAL(0x0d, 0x0d), /* 03 rows: 13 */
+ SPD_VAL(0x09, 0x0a), /* 04 cols: 9 / 10 */
+ SPD_VAL(0x00, 0x00), /* 05 */
+ SPD_VAL(0x40, 0x40), /* 06 */
+ SPD_VAL(0x00, 0x00), /* 07 */
+ SPD_VAL(0x05, 0x05), /* 08 */
+ SPD_VAL(0x30, 0x30), /* 09 */
+ SPD_VAL(0x45, 0x45), /* 10 */
+ SPD_VAL(0x02, 0x02), /* 11 ecc used */
+ SPD_VAL(0x82, 0x82), /* 12 */
+ SPD_VAL(0x10, 0x10), /* 13 */
+ SPD_VAL(0x08, 0x08), /* 14 */
+ SPD_VAL(0x00, 0x00), /* 15 */
+ SPD_VAL(0x0c, 0x0c), /* 16 */
+ SPD_VAL(0x04, 0x08), /* 17 banks: 4 / 8 */
+ SPD_VAL(0x38, 0x38), /* 18 */
+ SPD_VAL(0x00, 0x00), /* 19 */
+ SPD_VAL(0x02, 0x02), /* 20 */
+ SPD_VAL(0x00, 0x00), /* 21 */
+ SPD_VAL(0x03, 0x03), /* 22 */
+ SPD_VAL(0x3d, 0x3d), /* 23 */
+ SPD_VAL(0x45, 0x45), /* 24 */
+ SPD_VAL(0x50, 0x50), /* 25 */
+ SPD_VAL(0x45, 0x45), /* 26 */
+ SPD_VAL(0x3c, 0x3c), /* 27 */
+ SPD_VAL(0x28, 0x28), /* 28 */
+ SPD_VAL(0x3c, 0x3c), /* 29 */
+ SPD_VAL(0x2d, 0x2d), /* 30 */
+ SPD_VAL(0x20, 0x80), /* 31 */
+ SPD_VAL(0x20, 0x20), /* 32 */
+ SPD_VAL(0x27, 0x27), /* 33 */
+ SPD_VAL(0x10, 0x10), /* 34 */
+ SPD_VAL(0x17, 0x17), /* 35 */
+ SPD_VAL(0x3c, 0x3c), /* 36 */
+ SPD_VAL(0x1e, 0x1e), /* 37 */
+ SPD_VAL(0x1e, 0x1e), /* 38 */
+ SPD_VAL(0x00, 0x00), /* 39 */
+ SPD_VAL(0x00, 0x06), /* 40 */
+ SPD_VAL(0x37, 0x37), /* 41 */
+ SPD_VAL(0x4b, 0x7f), /* 42 */
+ SPD_VAL(0x80, 0x80), /* 43 */
+ SPD_VAL(0x18, 0x18), /* 44 */
+ SPD_VAL(0x22, 0x22), /* 45 */
+ SPD_VAL(0x00, 0x00), /* 46 */
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
+ SPD_VAL(0x10, 0x10), /* 62 */
+ SPD_VAL(0x7e, 0x1d), /* 63 */
+ { 'e', 's', 'd', '-', 'g', 'm', 'b', 'h' },
+ SPD_VAL(0x00, 0x00), /* 72 */
+#ifdef VME_CADDY2
+ { "vme-caddy/2 ram " }
+#else
+ { "vme-cpu/2 ram " }
+#endif
+};
+
+int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+ int old_bus = I2C_GET_BUS();
+ unsigned int l, sum;
+ int valid = 0;
+
+ I2C_SET_BUS(0);
+
+ if (i2c_read(chip, addr, alen, buffer, len) == 0)
+ if (memcmp(&buffer[64], &default_spd_eeprom.mid[0], 8) == 0) {
+ sum = 0;
+ for (l = 0; l < 63; l++)
+ sum = (sum + buffer[l]) & 0xff;
+ if (sum == buffer[63])
+ valid = 1;
+ else
+ printf("Invalid checksum in EEPROM %02x %02x\n",
+ sum, buffer[63]);
+ }
+
+ if (valid == 0) {
+ memcpy(buffer, (void *)&default_spd_eeprom, len);
+ sum = 0;
+ for (l = 0; l < 63; l++)
+ sum = (sum + buffer[l]) & 0xff;
+ if (sum != buffer[63])
+ printf("Invalid checksum in FLASH %02x %02x\n",
+ sum, buffer[63]);
+ buffer[63] = sum;
+ }
+
+ I2C_SET_BUS(old_bus);
+
+ return 0;
+}
--- /dev/null
+/*
+ * vme8349pin.h -- esd VME8349 MPC8349 I/O pin definition.
+ * Copyright (c) 2009 esd gmbh.
+ *
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __VME8349PIN_H__
+#define __VME8349PIN_H__
+
+#define GPIO2_V_SCON 0x80000000 /* In: from tsi148 1: is syscon */
+#define GPIO2_VME_RESET_N 0x20000000 /* Out: to tsi148 */
+#define GPIO2_TSI_PLL_RESET_N 0x08000000 /* Out: to tsi148 */
+#define GPIO2_TSI_POWERUP_RESET_N 0x00800000 /* Out: to tsi148 */
+#define GPIO2_L_RESET_EN_N 0x00100000 /* Out: 0:vme can assert cpu lrst*/
+
+#endif /* of ifndef __VME8349PIN_H__ */
+ifndef NAND_SPL
+ifeq ($(CONFIG_MK_NAND), y)
+TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+endif
+endif
+
+ifndef TEXT_BASE
TEXT_BASE = 0xFE000000
+endif
#include <mpc83xx.h>
#include <netdev.h>
#include <asm/io.h>
+#include <ns16550.h>
+#include <nand.h>
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
+#ifndef CONFIG_NAND_SPL
+
static u8 read_board_info(void)
{
u8 val8;
cpu_eth_init(bis); /* Initialize TSECs first */
return pci_eth_init(bis);
}
+
+#else /* CONFIG_NAND_SPL */
+
+int checkboard(void)
+{
+ puts("Board: Freescale MPC8315ERDB\n");
+ return 0;
+}
+
+void board_init_f(ulong bootflag)
+{
+ board_early_init_f();
+ NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500),
+ CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+ puts("NAND boot... ");
+ init_timebase();
+ initdram(0);
+ relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd,
+ CONFIG_SYS_NAND_U_BOOT_RELOC);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+ nand_boot();
+}
+
+void putc(char c)
+{
+ if (gd->flags & GD_FLG_SILENT)
+ return;
+
+ if (c == '\n')
+ NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), '\r');
+
+ NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), c);
+}
+
+#endif /* CONFIG_NAND_SPL */
* This is useful for faster booting in configs where the RAM is unlikely
* to be changed, or for things like NAND booting where space is tight.
*/
+#ifndef CONFIG_SYS_RAMBOOT
static long fixed_sdram(void)
{
volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
* Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
* or the DDR2 controller may fail to initialize correctly.
*/
- udelay(50000);
+ __udelay(50000);
im->ddr.csbnds[0].csbnds = (msize - 1) >> 24;
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
return msize;
}
+#else
+static long fixed_sdram(void)
+{
+ return CONFIG_SYS_DDR_SIZE * 1024 * 1024;
+}
+#endif /* CONFIG_SYS_RAMBOOT */
phys_size_t initdram(int board_type)
{
/*
- * Copyright 2008 Freescale Semiconductor.
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
static struct pci_controller pcie3_hose;
#endif
-int first_free_busno=0;
-
-void
-pci_init_board(void)
+#ifdef CONFIG_PCI
+void pci_init_board(void)
{
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- uint devdisr = gur->devdisr;
- uint sdrs2_io_sel =
- (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
- uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ struct fsl_pci_info pci_info[4];
+ u32 devdisr, pordevsr, io_sel, sdrs2_io_sel;
+ u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
+ int first_free_busno = 0;
+ int num = 0;
+
+ int pcie_ep, pcie_configured;
- debug(" pci_init_board: devdisr=%x, sdrs2_io_sel=%x, io_sel=%x,\
- host_agent=%x\n", devdisr, sdrs2_io_sel, io_sel, host_agent);
+ devdisr = in_be32(&gur->devdisr);
+ pordevsr = in_be32(&gur->pordevsr);
+ porpllsr = in_be32(&gur->porpllsr);
+ io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+ sdrs2_io_sel = (pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
+
+ debug(" pci_init_board: devdisr=%x, sdrs2_io_sel=%x, io_sel=%x\n",
+ devdisr, sdrs2_io_sel, io_sel);
if (sdrs2_io_sel == 7)
printf(" Serdes2 disalbed\n");
} else if (sdrs2_io_sel == 6)
printf(" eTSEC1 is in sgmii mode.\n");
+ puts("\n");
#ifdef CONFIG_PCIE3
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
- struct pci_controller *hose = &pcie3_hose;
- int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_3, host_agent);
- int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
- struct pci_region *r = hose->regions;
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE3 connected to Slot3 as %s (base address %x)",
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
+ SET_STD_PCIE_INFO(pci_info[num], 3);
+ pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
+ printf (" PCIE3 connected to Slot3 as %s (base address %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
- }
- printf ("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE3_MEM_BUS,
- CONFIG_SYS_PCIE3_MEM_PHYS,
- CONFIG_SYS_PCIE3_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE3_IO_BUS,
- CONFIG_SYS_PCIE3_IO_PHYS,
- CONFIG_SYS_PCIE3_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- first_free_busno=hose->last_busno+1;
- printf (" PCIE3 on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie3_hose, first_free_busno);
} else {
printf (" PCIE3: disabled\n");
}
-}
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */
#endif
#ifdef CONFIG_PCIE1
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
- struct pci_controller *hose = &pcie1_hose;
- int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
- int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
- struct pci_region *r = hose->regions;
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE1 connected to Slot1 as %s (base address %x)",
+ SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
+ printf (" PCIE1 connected to Slot1 as %s (base address %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
- }
- printf ("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_MEM_BUS,
- CONFIG_SYS_PCIE1_MEM_PHYS,
- CONFIG_SYS_PCIE1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_IO_BUS,
- CONFIG_SYS_PCIE1_IO_PHYS,
- CONFIG_SYS_PCIE1_IO_SIZE,
- PCI_REGION_IO);
-
-#ifdef CONFIG_SYS_PCIE1_MEM_BUS2
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_MEM_BUS2,
- CONFIG_SYS_PCIE1_MEM_PHYS2,
- CONFIG_SYS_PCIE1_MEM_SIZE2,
- PCI_REGION_MEM);
-#endif
- hose->region_count = r - hose->regions;
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- first_free_busno=hose->last_busno+1;
- printf(" PCIE1 on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
-
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie1_hose, first_free_busno);
} else {
printf (" PCIE1: disabled\n");
}
-}
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
#endif
#ifdef CONFIG_PCIE2
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
- struct pci_controller *hose = &pcie2_hose;
- int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent);
- int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
- struct pci_region *r = hose->regions;
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE2 connected to Slot 2 as %s (base address %x)",
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
+ SET_STD_PCIE_INFO(pci_info[num], 2);
+ pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
+ printf (" PCIE2 connected to Slot 2 as %s (base address %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
- }
- printf ("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_MEM_BUS,
- CONFIG_SYS_PCIE2_MEM_PHYS,
- CONFIG_SYS_PCIE2_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_IO_BUS,
- CONFIG_SYS_PCIE2_IO_PHYS,
- CONFIG_SYS_PCIE2_IO_SIZE,
- PCI_REGION_IO);
-
-#ifdef CONFIG_SYS_PCIE2_MEM_BUS2
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_MEM_BUS2,
- CONFIG_SYS_PCIE2_MEM_PHYS2,
- CONFIG_SYS_PCIE2_MEM_SIZE2,
- PCI_REGION_MEM);
-#endif
- hose->region_count = r - hose->regions;
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- first_free_busno=hose->last_busno+1;
- printf (" PCIE2 on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
-
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie2_hose, first_free_busno);
} else {
printf (" PCIE2: disabled\n");
}
-}
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
#endif
#ifdef CONFIG_PCI1
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
- struct pci_controller *hose = &pci1_hose;
- struct pci_region *r = hose->regions;
-
- uint pci_agent = is_fsl_pci_agent(LAW_TRGT_IF_PCI, host_agent);
- uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */
- uint pci_32 = 1;
- uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */
- uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */
+ pci_speed = 66666000;
+ pci_32 = 1;
+ pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+ pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
- printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %x)\n",
+ SET_STD_PCI_INFO(pci_info[num], 1);
+ pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
+ printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333000) ? "33" :
(pci_speed == 66666000) ? "66" : "unknown",
pci_clk_sel ? "sync" : "async",
pci_agent ? "agent" : "host",
pci_arb ? "arbiter" : "external-arbiter",
- (uint)pci
- );
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BUS,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BUS,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
- PCI_REGION_IO);
-
-#ifdef CONFIG_SYS_PCI1_MEM_BUS2
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BUS2,
- CONFIG_SYS_PCI1_MEM_PHYS2,
- CONFIG_SYS_PCI1_MEM_SIZE2,
- PCI_REGION_MEM);
-#endif
- hose->region_count = r - hose->regions;
- hose->first_busno=first_free_busno;
+ pci_info[num].regs);
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- first_free_busno=hose->last_busno+1;
- printf ("PCI on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pci1_hose, first_free_busno);
} else {
printf (" PCI: disabled\n");
}
-}
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
#endif
}
+#endif
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
- const u8 flash_esel = 1;
+ const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash + PROMJET region to caching-inhibited
/*
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
static struct pci_controller pcie3_hose;
#endif
-int first_free_busno=0;
-
-void
-pci_init_board(void)
+void pci_init_board(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+ struct fsl_pci_info pci_info[4];
+ u32 devdisr, pordevsr, io_sel;
+ u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
+ int first_free_busno = 0;
+ int num = 0;
+
+ int pcie_ep, pcie_configured;
- debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
- devdisr, io_sel, host_agent);
+ devdisr = in_be32(&gur->devdisr);
+ pordevsr = in_be32(&gur->pordevsr);
+ porpllsr = in_be32(&gur->porpllsr);
+ io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+
+ debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
if (io_sel & 1) {
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
printf (" eTSEC3 is in sgmii mode.\n");
}
+ puts("\n");
#ifdef CONFIG_PCIE3
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
- struct pci_controller *hose = &pcie3_hose;
- int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_3, host_agent);
- int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
- struct pci_region *r = hose->regions;
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE3 connected to ULI as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
- }
- printf ("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE3_MEM_BUS,
- CONFIG_SYS_PCIE3_MEM_PHYS,
- CONFIG_SYS_PCIE3_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE3_IO_BUS,
- CONFIG_SYS_PCIE3_IO_PHYS,
- CONFIG_SYS_PCIE3_IO_SIZE,
- PCI_REGION_IO);
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
+ SET_STD_PCIE_INFO(pci_info[num], 3);
+ pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
#ifdef CONFIG_SYS_PCIE3_MEM_BUS2
/* outbound memory */
- pci_set_region(r++,
+ pci_set_region(&pcie3_hose.regions[0],
CONFIG_SYS_PCIE3_MEM_BUS2,
CONFIG_SYS_PCIE3_MEM_PHYS2,
CONFIG_SYS_PCIE3_MEM_SIZE2,
PCI_REGION_MEM);
-#endif
- hose->region_count = r - hose->regions;
- hose->first_busno=first_free_busno;
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- first_free_busno=hose->last_busno+1;
- printf (" PCIE3 on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
+ pcie3_hose.region_count = 1;
+#endif
+ printf (" PCIE3 connected to ULI as %s (base addr %lx)\n",
+ pcie_ep ? "End Point" : "Root Complex",
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie3_hose, first_free_busno);
/*
* Activate ULI1575 legacy chip by performing a fake
} else {
printf (" PCIE3: disabled\n");
}
-
- }
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */
#endif
#ifdef CONFIG_PCIE1
- {
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
- struct pci_controller *hose = &pcie1_hose;
- int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
- int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
- struct pci_region *r = hose->regions;
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE1 connected to Slot2 as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
- }
- printf ("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_MEM_BUS,
- CONFIG_SYS_PCIE1_MEM_PHYS,
- CONFIG_SYS_PCIE1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_IO_BUS,
- CONFIG_SYS_PCIE1_IO_PHYS,
- CONFIG_SYS_PCIE1_IO_SIZE,
- PCI_REGION_IO);
-
+ SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
#ifdef CONFIG_SYS_PCIE1_MEM_BUS2
/* outbound memory */
- pci_set_region(r++,
+ pci_set_region(&pcie1_hose.regions[0],
CONFIG_SYS_PCIE1_MEM_BUS2,
CONFIG_SYS_PCIE1_MEM_PHYS2,
CONFIG_SYS_PCIE1_MEM_SIZE2,
PCI_REGION_MEM);
-#endif
- hose->region_count = r - hose->regions;
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- first_free_busno=hose->last_busno+1;
- printf(" PCIE1 on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
+ pcie1_hose.region_count = 1;
+#endif
+ printf (" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
+ pcie_ep ? "End Point" : "Root Complex",
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie1_hose, first_free_busno);
} else {
printf (" PCIE1: disabled\n");
}
- }
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
#endif
#ifdef CONFIG_PCIE2
- {
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
- struct pci_controller *hose = &pcie2_hose;
- int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent);
- int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
- struct pci_region *r = hose->regions;
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
- }
- printf ("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_MEM_BUS,
- CONFIG_SYS_PCIE2_MEM_PHYS,
- CONFIG_SYS_PCIE2_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_IO_BUS,
- CONFIG_SYS_PCIE2_IO_PHYS,
- CONFIG_SYS_PCIE2_IO_SIZE,
- PCI_REGION_IO);
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
+ SET_STD_PCIE_INFO(pci_info[num], 2);
+ pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
#ifdef CONFIG_SYS_PCIE2_MEM_BUS2
/* outbound memory */
- pci_set_region(r++,
+ pci_set_region(&pcie2_hose.regions[0],
CONFIG_SYS_PCIE2_MEM_BUS2,
CONFIG_SYS_PCIE2_MEM_PHYS2,
CONFIG_SYS_PCIE2_MEM_SIZE2,
PCI_REGION_MEM);
-#endif
- hose->region_count = r - hose->regions;
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- first_free_busno=hose->last_busno+1;
- printf (" PCIE2 on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
+ pcie2_hose.region_count = 1;
+#endif
+ printf (" PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
+ pcie_ep ? "End Point" : "Root Complex",
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie2_hose, first_free_busno);
} else {
printf (" PCIE2: disabled\n");
}
- }
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
#endif
-
#ifdef CONFIG_PCI1
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
- struct pci_controller *hose = &pci1_hose;
- struct pci_region *r = hose->regions;
-
- uint pci_agent = is_fsl_pci_agent(LAW_TRGT_IF_PCI, host_agent);
- uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */
- uint pci_32 = 1;
- uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */
- uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */
-
+ pci_speed = 66666000;
+ pci_32 = 1;
+ pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+ pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
- printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %x)\n",
+ SET_STD_PCI_INFO(pci_info[num], 1);
+ pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
+ printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333000) ? "33" :
(pci_speed == 66666000) ? "66" : "unknown",
pci_clk_sel ? "sync" : "async",
pci_agent ? "agent" : "host",
pci_arb ? "arbiter" : "external-arbiter",
- (uint)pci
- );
+ pci_info[num].regs);
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BUS,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BUS,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
- PCI_REGION_IO);
-
-#ifdef CONFIG_SYS_PCIE3_MEM_BUS2
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE3_MEM_BUS2,
- CONFIG_SYS_PCIE3_MEM_PHYS2,
- CONFIG_SYS_PCIE3_MEM_SIZE2,
- PCI_REGION_MEM);
-#endif
- hose->region_count = r - hose->regions;
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- first_free_busno=hose->last_busno+1;
- printf ("PCI on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pci1_hose, first_free_busno);
} else {
printf (" PCI: disabled\n");
}
-}
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
#endif
}
/*
- * Copyright 2004, 2007 Freescale Semiconductor.
+ * Copyright 2004, 2007, 200 Freescale Semiconductor, Inc.
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*
static struct pci_controller pcie1_hose;
#endif /* CONFIG_PCIE1 */
-int first_free_busno=0;
-
-void
-pci_init_board(void)
+void pci_init_board(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
-
-
-#ifdef CONFIG_PCI1
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
- struct pci_controller *hose = &pci1_hose;
- struct pci_region *r = hose->regions;
+ struct fsl_pci_info pci_info[4];
+ u32 devdisr, pordevsr, io_sel;
+ u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
+ int first_free_busno = 0;
+ int num = 0;
- uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */
- uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */
- uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */
+ int pcie_ep, pcie_configured;
- uint pci_agent = is_fsl_pci_agent(LAW_TRGT_IF_PCI_1, host_agent);
+ devdisr = in_be32(&gur->devdisr);
+ pordevsr = in_be32(&gur->pordevsr);
+ porpllsr = in_be32(&gur->porpllsr);
+ io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- uint pci_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */
+ debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
- if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
- printf (" PCI: %d bit, %s MHz, %s, %s, %s\n",
+#ifdef CONFIG_PCI1
+ pci_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */
+ pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */
+ pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+ pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
+
+ if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+ SET_STD_PCI_INFO(pci_info[num], 1);
+ pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
+ printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333000) ? "33" :
(pci_speed == 66666000) ? "66" : "unknown",
pci_clk_sel ? "sync" : "async",
pci_agent ? "agent" : "host",
- pci_arb ? "arbiter" : "external-arbiter"
- );
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BUS,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BUS,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
- PCI_REGION_IO);
- hose->region_count = r - hose->regions;
-
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- first_free_busno=hose->last_busno+1;
- printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
+ pci_arb ? "arbiter" : "external-arbiter",
+ pci_info[num].regs);
+
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pci1_hose, first_free_busno);
+
#ifdef CONFIG_PCIX_CHECK
- if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
+ if (!(pordevsr & MPC85xx_PORDEVSR_PCI1)) {
/* PCI-X init */
if (CONFIG_SYS_CLK_FREQ < 66000000)
printf("PCI-X will only work at 66 MHz\n");
} else {
printf (" PCI: disabled\n");
}
-}
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
#endif
#ifdef CONFIG_PCI2
{
- uint pci2_clk_sel = gur->porpllsr & 0x4000; /* PORPLLSR[17] */
+ uint pci2_clk_sel = porpllsr & 0x4000; /* PORPLLSR[17] */
uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */
if (pci_dual) {
printf (" PCI2: 32 bit, 66 MHz, %s\n",
}
}
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCI2; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */
#endif /* CONFIG_PCI2 */
#ifdef CONFIG_PCIE1
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
- struct pci_controller *hose = &pcie1_hose;
- int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
- struct pci_region *r = hose->regions;
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
- int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
-
- if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE connected to slot as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
-
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
- }
- printf ("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_MEM_BUS,
- CONFIG_SYS_PCIE1_MEM_PHYS,
- CONFIG_SYS_PCIE1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_IO_BUS,
- CONFIG_SYS_PCIE1_IO_PHYS,
- CONFIG_SYS_PCIE1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- printf ("PCIE on bus %d - %d\n",hose->first_busno,hose->last_busno);
-
- first_free_busno=hose->last_busno+1;
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
+ printf (" PCIE1 connected to Slot as %s (base addr %lx)\n",
+ pcie_ep ? "End Point" : "Root Complex",
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie1_hose, first_free_busno);
} else {
- printf (" PCIE: disabled\n");
+ printf (" PCIE1: disabled\n");
}
- }
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
#endif
-
}
int last_stage_init(void)
/*
- * Copyright 2007 Freescale Semiconductor.
+ * Copyright 2007,2009 Freescale Semiconductor, Inc.
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*
static struct pci_controller pcie1_hose;
#endif /* CONFIG_PCIE1 */
-int first_free_busno = 0;
-
/*
* pib_init() -- Initialize the PCA9555 IO expander on the PIB board
*/
}
#ifdef CONFIG_PCI
-void
-pci_init_board(void)
+void pci_init_board(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
-
-#ifdef CONFIG_PCI1
-{
- pib_init();
-
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
- struct pci_controller *hose = &pci1_hose;
- struct pci_region *r = hose->regions;
+ struct fsl_pci_info pci_info[2];
+ u32 devdisr, pordevsr, io_sel;
+ u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
+ int first_free_busno = 0;
+ int num = 0;
- uint pci_32 = 1; /* PORDEVSR[15] */
- uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */
- uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */
+ int pcie_ep, pcie_configured;
- uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || (host_agent == 6);
+ devdisr = in_be32(&gur->devdisr);
+ pordevsr = in_be32(&gur->pordevsr);
+ porpllsr = in_be32(&gur->porpllsr);
+ io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- uint pci_speed = 66666000;
+ debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
- if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
- printf (" PCI: %d bit, %s MHz, %s, %s, %s\n",
+#ifdef CONFIG_PCI1
+ pci_speed = 66666000;
+ pci_32 = 1;
+ pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+ pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
+
+ if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+ SET_STD_PCI_INFO(pci_info[num], 1);
+ pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
+ printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333000) ? "33" :
(pci_speed == 66666000) ? "66" : "unknown",
pci_clk_sel ? "sync" : "async",
pci_agent ? "agent" : "host",
- pci_arb ? "arbiter" : "external-arbiter"
- );
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BUS,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BUS,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- first_free_busno = hose->last_busno+1;
- printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
+ pci_arb ? "arbiter" : "external-arbiter",
+ pci_info[num].regs);
+
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pci1_hose, first_free_busno);
} else {
- printf (" PCI: disabled\n");
+ printf (" PCI: disabled\n");
}
-}
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
#endif
#ifdef CONFIG_PCIE1
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
- struct pci_controller *hose = &pcie1_hose;
- int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
- struct pci_region *r = hose->regions;
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
- int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
-
- if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE connected to slot as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
-
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
- }
- printf ("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_MEM_BUS,
- CONFIG_SYS_PCIE1_MEM_PHYS,
- CONFIG_SYS_PCIE1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_IO_BUS,
- CONFIG_SYS_PCIE1_IO_PHYS,
- CONFIG_SYS_PCIE1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- printf ("PCIE on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
-
- first_free_busno=hose->last_busno+1;
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
+ printf (" PCIE1 connected to Slot as %s (base addr %lx)\n",
+ pcie_ep ? "End Point" : "Root Complex",
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie1_hose, first_free_busno);
} else {
- printf (" PCIE: disabled\n");
+ printf (" PCIE1: disabled\n");
}
-}
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
#endif
}
#endif /* CONFIG_PCI */
console_assign(stdin, "eserial1");
printf("Switched to UART1 (initial log has been printed to "
"UART0).\n");
+
+ clrsetbits_be32(&gur->plppar1, PLPPAR1_UART0_BIT_MASK,
+ PLPPAR1_ESDHC_4BITS_VAL);
+ clrsetbits_be32(&gur->plpdir1, PLPDIR1_UART0_BIT_MASK,
+ PLPDIR1_ESDHC_4BITS_VAL);
bcsr6 |= BCSR6_SD_CARD_4BITS;
} else {
printf("should be disabled.\n");
break;
}
}
+
+ if (hwconfig_subarg_cmp("esdhc", "mode", "4-bits")) {
+ off = fdt_node_offset_by_compatible(blob, -1, "fsl,esdhc");
+ if (off < 0) {
+ printf("WARNING: could not find esdhc node\n");
+ return;
+ }
+ fdt_delprop(blob, off, "sdhci,1-bit-only");
+ }
}
#else
static inline void fdt_board_fixup_esdhc(void *blob, bd_t *bd) {}
static struct pci_controller pcie1_hose;
#endif /* CONFIG_PCIE1 */
-int first_free_busno = 0;
-
#ifdef CONFIG_PCI
-void
-pci_init_board(void)
-{
- volatile ccsr_gur_t *gur;
- uint io_sel;
- uint host_agent;
-
- gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
-
-#ifdef CONFIG_PCIE1
+void pci_init_board(void)
{
- volatile ccsr_fsl_pci_t *pci;
- struct pci_controller *hose;
- int pcie_ep;
- struct pci_region *r;
- int pcie_configured;
-
- pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
- hose = &pcie1_hose;
- pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
- r = hose->regions;
- pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
-
- if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE connected to slot as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
-
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",
- pci->pme_msg_det);
- }
- printf ("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_MEM_BUS,
- CONFIG_SYS_PCIE1_MEM_PHYS,
- CONFIG_SYS_PCIE1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_IO_BUS,
- CONFIG_SYS_PCIE1_IO_PHYS,
- CONFIG_SYS_PCIE1_IO_SIZE,
- PCI_REGION_IO);
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ struct fsl_pci_info pci_info[1];
+ u32 devdisr, pordevsr, io_sel;
+ int first_free_busno = 0;
+ int num = 0;
- hose->region_count = r - hose->regions;
+ int pcie_ep, pcie_configured;
- hose->first_busno=first_free_busno;
+ devdisr = in_be32(&gur->devdisr);
+ pordevsr = in_be32(&gur->pordevsr);
+ io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- printf ("PCIE on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
+ debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
- first_free_busno=hose->last_busno+1;
+#ifdef CONFIG_PCIE1
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
+ printf (" PCIE1 connected to Slot as %s (base addr %lx)\n",
+ pcie_ep ? "End Point" : "Root Complex",
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie1_hose, first_free_busno);
} else {
- printf (" PCIE: disabled\n");
+ printf (" PCIE1: disabled\n");
}
-}
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
#endif
+
}
#endif /* CONFIG_PCI */
/*
- * Copyright 2007-2008 Freescale Semiconductor, Inc.
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
struct fsl_pci_info pci_info[3];
- u32 devdisr, pordevsr, io_sel, host_agent, temp32;
+ u32 devdisr, pordevsr, io_sel, temp32;
int first_free_busno = 0;
int num = 0;
devdisr = in_be32(&gur->devdisr);
pordevsr = in_be32(&gur->pordevsr);
io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16;
- debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
- devdisr, io_sel, host_agent);
+ debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
if (!(pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
printf (" eTSEC1 is in sgmii mode.\n");
puts("\n");
#ifdef CONFIG_PCIE3
- pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_3, host_agent);
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
SET_STD_PCIE_INFO(pci_info[num], 3);
+ pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
printf (" PCIE3 connected to ULI as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
#endif
#ifdef CONFIG_PCIE2
- pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent);
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
SET_STD_PCIE_INFO(pci_info[num], 2);
+ pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
printf (" PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
#endif
#ifdef CONFIG_PCIE1
- pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
printf (" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
- const u8 flash_esel = 2;
+ const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash + PROMJET region to caching-inhibited
/* TLB 1 */
/* *I*** - Covers boot page */
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 1),
/* *I*G* - CCSRBAR */
/*
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
static struct pci_controller pcie2_hose;
#endif
-int first_free_busno = 0;
-
void pci_init_board(void)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
volatile ccsr_gur_t *gur = &immap->im_gur;
- uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC8610_PORDEVSR_IO_SEL)
- >> MPC8610_PORDEVSR_IO_SEL_SHIFT;
- uint host_agent = (gur->porbmsr & MPC8610_PORBMSR_HA)
- >> MPC8610_PORBMSR_HA_SHIFT;
+ struct fsl_pci_info pci_info[3];
+ u32 devdisr, pordevsr, io_sel;
+ int first_free_busno = 0;
+ int num = 0;
+
+ int pci_agent, pcie_ep, pcie_configured;
+
+ devdisr = in_be32(&gur->devdisr);
+ pordevsr = in_be32(&gur->pordevsr);
+ io_sel = (pordevsr & MPC8610_PORDEVSR_IO_SEL)
+ >> MPC8610_PORDEVSR_IO_SEL_SHIFT;
- printf( " pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
- devdisr, io_sel, host_agent);
+ debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
#ifdef CONFIG_PCIE1
- {
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
- struct pci_controller *hose = &pcie1_hose;
- int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
- int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
- struct pci_region *r = hose->regions;
-
- if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)) {
- printf(" PCIe 1 connected to Uli as %s (base address %x)\n",
- pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
- if (pci->pme_msg_det)
- pci->pme_msg_det = 0xffffffff;
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_MEM_BUS,
- CONFIG_SYS_PCIE1_MEM_PHYS,
- CONFIG_SYS_PCIE1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_IO_BUS,
- CONFIG_SYS_PCIE1_IO_PHYS,
- CONFIG_SYS_PCIE1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCI-Express 1 on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
-
- } else
- puts(" PCI-Express 1: Disabled\n");
- }
-#else
- puts("PCI-Express 1: Disabled\n");
-#endif /* CONFIG_PCIE1 */
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+
+ if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)){
+ SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
+ printf (" PCIE1 connected to ULI as %s (base addr %lx)\n",
+ pcie_ep ? "End Point" : "Root Complex",
+ pci_info[num].regs);
+
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie1_hose, first_free_busno);
+ } else {
+ printf (" PCIE1: disabled\n");
+ }
+ puts("\n");
+#else
+ setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCIE1); /* disable */
+#endif
#ifdef CONFIG_PCIE2
- {
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
- struct pci_controller *hose = &pcie2_hose;
- struct pci_region *r = hose->regions;
-
- int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
- int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent);
-
- if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)) {
- printf(" PCI-Express 2 connected to slot as %s" \
- " (base address %x)\n",
- pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
- if (pci->pme_msg_det)
- pci->pme_msg_det = 0xffffffff;
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_MEM_BUS,
- CONFIG_SYS_PCIE2_MEM_PHYS,
- CONFIG_SYS_PCIE2_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_IO_BUS,
- CONFIG_SYS_PCIE2_IO_PHYS,
- CONFIG_SYS_PCIE2_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCI-Express 2 on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
- } else
- puts(" PCI-Express 2: Disabled\n");
- }
-#else
- puts("PCI-Express 2: Disabled\n");
-#endif /* CONFIG_PCIE2 */
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
+
+ if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)){
+ SET_STD_PCIE_INFO(pci_info[num], 2);
+ pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
+ printf (" PCIE2 connected to Slot as %s (base addr %lx)\n",
+ pcie_ep ? "End Point" : "Root Complex",
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie2_hose, first_free_busno);
+ } else {
+ printf (" PCIE2: disabled\n");
+ }
+ puts("\n");
+#else
+ setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCIE2); /* disable */
+#endif
#ifdef CONFIG_PCI1
- {
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
- struct pci_controller *hose = &pci1_hose;
- int pci_agent = is_fsl_pci_agent(LAW_TRGT_IF_PCI_1, host_agent);
- struct pci_region *r = hose->regions;
-
- if ( !(devdisr & MPC86xx_DEVDISR_PCI1)) {
+ if (!(devdisr & MPC86xx_DEVDISR_PCI1)) {
+ SET_STD_PCI_INFO(pci_info[num], 1);
+ pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
printf(" PCI connected to PCI slots as %s" \
- " (base address %x)\n",
+ " (base address %lx)\n",
pci_agent ? "Agent" : "Host",
- (uint)pci);
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BUS,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BUS,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCI on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
-
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pci1_hose, first_free_busno);
+ } else {
+ printf (" PCI: disabled\n");
+ }
- } else
- puts(" PCI: Disabled\n");
- }
-#endif /* CONFIG_PCI1 */
+ puts("\n");
+#else
+ setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCI1); /* disable */
+#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
- const u8 flash_esel = 2;
+ const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash region to caching-inhibited
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
struct fsl_pci_info pci_info[2];
- u32 devdisr, pordevsr, io_sel, host_agent;
+ u32 devdisr, pordevsr, io_sel;
int first_free_busno = 0;
int num = 0;
devdisr = in_be32(&gur->devdisr);
pordevsr = in_be32(&gur->pordevsr);
io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16;
- debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
- devdisr, io_sel, host_agent);
+ debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
printf (" eTSEC2 is in sgmii mode.\n");
puts("\n");
#ifdef CONFIG_PCIE2
- pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent);
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
SET_STD_PCIE_INFO(pci_info[num], 2);
+ pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
printf(" PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
#endif
#ifdef CONFIG_PCIE1
- pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
printf(" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
/* TLB 1 */
/* *I*** - Covers boot page */
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 1),
/* *I*G* - CCSRBAR */
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
struct fsl_pci_info pci_info[3];
- u32 devdisr, pordevsr, io_sel, host_agent;
+ u32 devdisr, pordevsr, io_sel;
int first_free_busno = 0;
int num = 0;
devdisr = in_be32(&gur->devdisr);
pordevsr = in_be32(&gur->pordevsr);
io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16;
- debug(" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
- devdisr, io_sel, host_agent);
+ debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
printf(" eTSEC2 is in sgmii mode.\n");
puts("\n");
#ifdef CONFIG_PCIE2
- pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent);
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)) {
SET_STD_PCIE_INFO(pci_info[num], 2);
+ pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
printf(" PCIE2 connected to ULI as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
#endif
#ifdef CONFIG_PCIE3
- pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_3, host_agent);
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)) {
SET_STD_PCIE_INFO(pci_info[num], 3);
+ pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
printf(" PCIE3 connected to Slot 1 as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
#endif
#ifdef CONFIG_PCIE1
- pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
printf(" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
- const u8 flash_esel = 2;
+ const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash + PROMJET region to caching-inhibited
/* TLB 1 */
/* *I*** - Covers boot page */
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 1),
/* *I*G* - CCSRBAR */
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#ifdef CONFIG_PCI1
- uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CONFIG_SYS_PCI1_ADDR;
struct pci_controller *hose = &pci1_hose;
struct pci_region *r = hose->regions;
/* PORPLLSR[16] */
uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
- uint pci_agent = is_fsl_pci_agent(LAW_TRGT_IF_PCI_1, host_agent);
+ int pci_agent = fsl_setup_hose(hose, CONFIG_SYS_PCI1_ADDR);
uint pci_speed = CONFIG_SYS_CLK_FREQ; /* PCI PSPEED in [4:5] */
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#ifdef CONFIG_PCIE1
uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CONFIG_SYS_PCIE1_ADDR;
struct pci_controller *hose = &pcie1_hose;
- int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
+ int pcie_ep;
struct pci_region *r = hose->regions;
int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+ pcie_ep = fsl_setup_hose(hose, CONFIG_SYS_PCIE1_ADDR);
+
if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("PCIe: %s, base address %x",
pcie_ep ? "End point" : "Root complex", (uint)pci);
#endif
#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
(ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */
+ (ACR_APARK << ACR_APARK_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */
+ (ACR_PARKM << ACR_PARKM_SHIFT) |
#endif
0;
__be32 acr_val =
#endif
#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
(CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */
+ (CONFIG_SYS_ACR_APARK << ACR_APARK_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */
+ (CONFIG_SYS_ACR_PARKM << ACR_PARKM_SHIFT) |
#endif
0;
__be32 spcr_mask =
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <i2c.h>
#include <spd.h>
#include <asm/mmu.h>
unsigned int ddrc_ecc_enable;
unsigned int pvr = get_pvr();
+ /*
+ * First disable the memory controller (could be enabled
+ * by the debugger)
+ */
+ clrsetbits_be32(&ddr->sdram_cfg, SDRAM_CFG_MEM_EN, 0);
+ sync();
+ isync();
+
/* Read SPD parameters with I2C */
CONFIG_SYS_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
#ifdef SPD_DEBUG
#ifdef CONFIG_FSL_CORENET
corenet_tb_init();
#endif
+ init_used_tlb_cams();
}
while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC))
;
+#ifdef CONFIG_SYS_CACHE_STASHING
+ /* set stash id to (coreID) * 2 + 32 + L2 (1) */
+ mtspr(SPRN_L2CSR1, (32 + 1));
+#endif
+
/* enable the cache */
mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0);
goto next;
}
+#ifdef CONFIG_SYS_CACHE_STASHING
+ {
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+ if (reg)
+ fdt_setprop_cell(blob, l2_off, "cache-stash-id",
+ (*reg * 2) + 32 + 1);
+ }
+#endif
+
fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
fdt_setprop_cell(blob, l2_off, "cache-block-size", line_size);
fdt_setprop_cell(blob, l2_off, "cache-size", size);
fdt_setprop_cell(blob, off, "d-cache-size", dsize);
fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
+#ifdef CONFIG_SYS_CACHE_STASHING
+ {
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+ if (reg)
+ fdt_setprop_cell(blob, off, "cache-stash-id",
+ (*reg * 2) + 32 + 0);
+ }
+#endif
+
/* i-side config */
isize = (l1cfg1 & 0x7ff) * 1024;
inum_ways = ((l1cfg1 >> 11) & 0xff) + 1;
do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1);
}
+#if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
+static void ft_fixup_clks(void *blob, const char *alias, unsigned long freq)
+{
+ const char *path = fdt_get_alias(blob, alias);
+
+ int off = fdt_path_offset(blob, path);
+
+ if (off >= 0) {
+ off = fdt_setprop_cell(blob, off, "clock-frequency", freq);
+ if (off > 0)
+ printf("WARNING enable to set clock-frequency "
+ "for %s: %s\n", alias, fdt_strerror(off));
+ }
+}
+
+static void ft_fixup_dpaa_clks(void *blob)
+{
+ sys_info_t sysinfo;
+
+ get_sys_info(&sysinfo);
+ ft_fixup_clks(blob, "fman0", sysinfo.freqFMan[0]);
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ ft_fixup_clks(blob, "fman1", sysinfo.freqFMan[1]);
+#endif
+
+#ifdef CONFIG_SYS_DPAA_PME
+ ft_fixup_clks(blob, "pme", sysinfo.freqPME);
+#endif
+}
+#else
+#define ft_fixup_dpaa_clks(x)
+#endif
+
void ft_cpu_setup(void *blob, bd_t *bd)
{
int off;
#if defined(CONFIG_FSL_ESDHC)
fdt_fixup_esdhc(blob, bd);
#endif
+
+ ft_fixup_dpaa_clks(blob);
}
e = find_law(bootpg);
out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K);
+ /* readback to sync write */
+ in_be32(&ccm->bstrar);
+
/* disable time base at the platform */
out_be32(&rcpm->ctbenrl, cpu_up_mask);
disable_tlb(i);
set_tlb(1, CONFIG_BPTR_VIRT_ADDR, bootpg, /* tlb, epn, rpn */
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, /* perms, wimge */
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */
memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096);
slwi r8,r4,5
add r10,r3,r8
+#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
+ /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+ slwi r8,r4,1
+ addi r8,r8,32
+ mtspr L1CSR2,r8
+#endif
+
#ifdef CONFIG_BACKSIDE_L2_CACHE
/* Enable/invalidate the L2 cache */
msync
and. r1,r3,r2
bne 1b
+#ifdef CONFIG_SYS_CACHE_STASHING
+ /* set stash id to (coreID) * 2 + 32 + L2 (1) */
+ addi r3,r8,1
+ mtspr SPRN_L2CSR1,r3
+#endif
+
lis r3,CONFIG_SYS_INIT_L2CSR0@h
ori r3,r3,CONFIG_SYS_INIT_L2CSR0@l
mtspr SPRN_L2CSR0,r3
lis r11,(MAS1_VALID|MAS1_IPROT)@h
ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
mtspr SPRN_MAS1,r11
- oris r11,r13,(MAS2_I)@h
- ori r11,r13,(MAS2_I)@l
+ oris r11,r13,(MAS2_I|MAS2_G)@h
+ ori r11,r13,(MAS2_I|MAS2_G)@l
mtspr SPRN_MAS2,r11
oris r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h
ori r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l
#ifdef CONFIG_SYS_DPAA_PME
if (rcw_tmp & PME_CLK_SEL)
- sysInfo->freqPME = freqCC_PLL[2] / 2;
- else
sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+ else
+ sysInfo->freqPME = freqCC_PLL[2] / 2;
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
if (rcw_tmp & FM1_CLK_SEL)
- sysInfo->freqFMan[0] = freqCC_PLL[2] / 2;
- else
sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+ else
+ sysInfo->freqFMan[0] = freqCC_PLL[2] / 2;
#if (CONFIG_SYS_NUM_FMAN) == 2
if (rcw_tmp & FM2_CLK_SEL)
- sysInfo->freqFMan[1] = freqCC_PLL[2] / 2;
- else
sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+ else
+ sysInfo->freqFMan[1] = freqCC_PLL[2] / 2;
#endif
#endif
/*
- * Copyright 2004, 2007-2009 Freescale Semiconductor.
+ * Copyright 2004, 2007-2009 Freescale Semiconductor, Inc.
* Copyright (C) 2003 Motorola,Inc.
*
* See file CREDITS for list of people who contributed to this
*
*/
+#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
+ /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+ li r2,(32 + 0)
+ mtspr L1CSR2,r2
+#endif
+
lis r2,L1CSR0_CPE@H /* enable parity */
ori r2,r2,L1CSR0_DCE
mtspr L1CSR0,r2 /* enable L1 Dcache */
}
#ifndef CONFIG_NAND_SPL
+static inline void use_tlb_cam(u8 idx)
+{
+ int i = idx / 32;
+ int bit = idx % 32;
+
+ gd->used_tlb_cams[i] |= (1 << bit);
+}
+
+static inline void free_tlb_cam(u8 idx)
+{
+ int i = idx / 32;
+ int bit = idx % 32;
+
+ gd->used_tlb_cams[i] &= ~(1 << bit);
+}
+
+void init_used_tlb_cams(void)
+{
+ int i;
+ unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
+
+ for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++)
+ gd->used_tlb_cams[i] = 0;
+
+ /* walk all the entries */
+ for (i = 0; i < num_cam; i++) {
+ u32 _mas1;
+
+ mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0));
+
+ asm volatile("tlbre;isync");
+ _mas1 = mfspr(MAS1);
+
+ /* if the entry isn't valid skip it */
+ if ((_mas1 & MAS1_VALID))
+ use_tlb_cam(i);
+ }
+}
+
+int find_free_tlbcam(void)
+{
+ int i;
+ u32 idx;
+
+ for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++) {
+ idx = ffz(gd->used_tlb_cams[i]);
+
+ if (idx != 32)
+ break;
+ }
+
+ idx += i * 32;
+
+ if (idx >= CONFIG_SYS_NUM_TLBCAMS)
+ return -1;
+
+ return idx;
+}
+
void set_tlb(u8 tlb, u32 epn, u64 rpn,
u8 perms, u8 wimge,
u8 ts, u8 esel, u8 tsize, u8 iprot)
{
u32 _mas0, _mas1, _mas2, _mas3, _mas7;
+ if (tlb == 1)
+ use_tlb_cam(esel);
+
_mas0 = FSL_BOOKE_MAS0(tlb, esel, 0);
_mas1 = FSL_BOOKE_MAS1(1, iprot, 0, ts, tsize);
_mas2 = FSL_BOOKE_MAS2(epn, wimge);
{
u32 _mas0, _mas1, _mas2, _mas3, _mas7;
+ free_tlb_cam(esel);
+
_mas0 = FSL_BOOKE_MAS0(1, esel, 0);
_mas1 = 0;
_mas2 = 0;
}
#endif
-#ifndef CONFIG_SYS_DDR_TLB_START
-#define CONFIG_SYS_DDR_TLB_START 8
-#endif
-
unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
{
+ int i;
unsigned int tlb_size;
- unsigned int ram_tlb_index = CONFIG_SYS_DDR_TLB_START;
unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
u64 size, memsize = (u64)memsize_in_meg << 20;
/* Convert (4^max) kB to (2^max) bytes */
max_cam = max_cam * 2 + 10;
- for (; size && ram_tlb_index < 16; ram_tlb_index++) {
+ for (i = 0; size && i < 8; i++) {
+ int ram_tlb_index = find_free_tlbcam();
u32 camsize = __ilog2_u64(size) & ~1U;
u32 align = __ilog2(ram_tlb_address) & ~1U;
+ if (ram_tlb_index == -1)
+ break;
+
if (align == -2) align = max_cam;
if (camsize > align)
camsize = align;
* The DDR3 spec has not tXARD,
* we use the tXP instead of it.
* tXP=max(3nCK, 7.5ns) for DDR3.
- * we use the tXP=6
* spec has not the tAXPD, we use
* tAXPD=8, need design to confirm.
*/
- act_pd_exit_mclk = 6;
- pre_pd_exit_mclk = 6;
+ int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */
+ act_pd_exit_mclk = picos_to_mclk(tXP);
+ /* Mode register MR0[A12] is '1' - fast exit */
+ pre_pd_exit_mclk = act_pd_exit_mclk;
taxpd_mclk = 8;
tmrd_mclk = 4;
#else /* CONFIG_FSL_DDR2 */
}
/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
-static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr)
+static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts)
{
unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */
unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */
#if defined(CONFIG_FSL_DDR3)
- unsigned int rtt_wr = 2; /* 120 ohm Rtt_WR */
+ unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */
unsigned int srt = 0; /* self-refresh temerature, normal range */
unsigned int asr = 0; /* auto self-refresh disable */
unsigned int cwl = compute_cas_write_latency() - 5;
unsigned int pasr = 0; /* partial array self refresh disable */
+ if (popts->rtt_override)
+ rtt_wr = popts->rtt_wr_override_value;
+
esdmode2 = (0
| ((rtt_wr & 0x3) << 9)
| ((srt & 0x1) << 7)
}
/* DDR Write Leveling Control (DDR_WRLVL_CNTL) */
-static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr,
- unsigned int wrlvl_en)
+static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en,
+ const memctl_options_t *popts)
{
/*
* First DQS pulse rising edge after margining mode
/* tWL_DQSEN min = 25 nCK, we set it 32 */
wrlvl_dqsen = 0x5;
/*
- * Write leveling sample time at least need 14 clocks
- * due to tWLO = 9, we set it 15 clocks
+ * Write leveling sample time at least need 6 clocks
+ * higher than tWLO to allow enough time for progagation
+ * delay and sampling the prime data bits.
*/
wrlvl_smpl = 0xf;
/*
* Write leveling start time
* The value use for the DQS_ADJUST for the first sample
* when write leveling is enabled.
- * we set it 1 clock delay
*/
wrlvl_start = 0x8;
+ /*
+ * Override the write leveling sample and start time
+ * according to specific board
+ */
+ if (popts->wrlvl_override) {
+ wrlvl_smpl = popts->wrlvl_sample;
+ wrlvl_start = popts->wrlvl_start;
+ }
}
ddr->ddr_wrlvl_cntl = (0
/* Don't set up boundaries for other CS
* other than CS0, if bank interleaving
* is enabled and not CS2+CS3 interleaved.
+ * But we need to set the ODT_RD_CFG and
+ * ODT_WR_CFG for CS1_CONFIG here.
*/
+ set_csn_config(i, ddr, popts, dimm_params);
break;
}
set_ddr_sdram_cfg_2(ddr, popts);
set_ddr_sdram_mode(ddr, popts, common_dimm,
cas_latency, additive_latency);
- set_ddr_sdram_mode_2(ddr);
+ set_ddr_sdram_mode_2(ddr, popts);
set_ddr_sdram_interval(ddr, popts, common_dimm);
set_ddr_data_init(ddr);
set_ddr_sdram_clk_cntl(ddr, popts);
set_timing_cfg_5(ddr);
set_ddr_zq_cntl(ddr, zq_en);
- set_ddr_wrlvl_cntl(ddr, wrlvl_en);
+ set_ddr_wrlvl_cntl(ddr, wrlvl_en, popts);
set_ddr_sr_cntr(ddr, sr_it);
* meet the tQDSS under different loading.
*/
popts->wrlvl_en = 1;
+ popts->wrlvl_override = 0;
#endif
/*
#include <pci.h>
struct pci_info {
- u16 agent;
u16 cfg;
};
-/* The agent field is a bit mask in which each bit represents the value of
- * cfg_host_agt[] signal and the bit is set of the given interface would be
- * in agent/end-point mode for the given interface.
- *
- * The same idea is true of the cfg field. The bit will be set if the
- * interface would be enabled based on the value of cfg_IO_ports[] signal
+/* The cfg field is a bit mask in which each bit represents the value of
+ * cfg_IO_ports[] signal and the bit is set if the interface would be
+ * enabled based on the value of cfg_IO_ports[] signal
*
* On MPC86xx/PQ3 based systems:
- * we extract cfg_host_agt from GUTS register PORBMSR
* we extract cfg_IO_ports from GUTS register PORDEVSR
*
* cfg_IO_ports only exist on systems w/PCIe (we set cfg 0 for systems
static struct pci_info pci_config_info[] =
{
[LAW_TRGT_IF_PCI] = {
- .agent = (1 << 0) | (1 << 2),
.cfg = 0,
},
};
static struct pci_info pci_config_info[] =
{
[LAW_TRGT_IF_PCI] = {
- .agent = (1 << 0),
.cfg = 0,
},
};
static struct pci_info pci_config_info[] =
{
[LAW_TRGT_IF_PCI] = {
- .agent = (1 << 6),
.cfg = 0,
},
[LAW_TRGT_IF_PCIE_1] = {
- .agent = (1 << 5),
.cfg = (1 << 2) | (1 << 3) | (1 << 5) | (1 << 7),
},
[LAW_TRGT_IF_PCIE_2] = {
- .agent = (1 << 3),
.cfg = (1 << 5) | (1 << 7),
},
[LAW_TRGT_IF_PCIE_3] = {
- .agent = (1 << 1),
.cfg = (1 << 7),
},
};
static struct pci_info pci_config_info[] =
{
[LAW_TRGT_IF_PCI] = {
- .agent = (1 << 6),
.cfg = 0,
},
[LAW_TRGT_IF_PCIE_1] = {
- .agent = (1 << 5),
.cfg = (1 << 2) | (1 << 3) | (1 << 4) | (1 << 5) |
(1 << 6) | (1 << 7),
},
[LAW_TRGT_IF_PCIE_2] = {
- .agent = (1 << 3),
.cfg = (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7),
},
[LAW_TRGT_IF_PCIE_3] = {
- .agent = (1 << 1),
.cfg = (1 << 6) | (1 << 7),
},
};
static struct pci_info pci_config_info[] =
{
[LAW_TRGT_IF_PCI_1] = {
- .agent = (1 << 4) | (1 << 6),
.cfg = 0,
},
[LAW_TRGT_IF_PCI_2] = {
- .agent = (1 << 4) | (1 << 6),
.cfg = 0,
},
/* PCI_2 is always host and we dont use iosel to determine enable/disable */
[LAW_TRGT_IF_PCIE_1] = {
- .agent = (1 << 0) | (1 << 2),
.cfg = (1 << 3) | (1 << 4) | (1 << 7),
},
};
static struct pci_info pci_config_info[] =
{
[LAW_TRGT_IF_PCI] = {
- .agent = (1 << 0) | (1 << 4) | (1 << 6),
.cfg = 0,
},
[LAW_TRGT_IF_PCIE_1] = {
- .agent = (1 << 0) | (1 << 2) | (1 << 4),
.cfg = (1 << 3) | (1 << 4) | (1 << 7),
},
};
static struct pci_info pci_config_info[] =
{
[LAW_TRGT_IF_PCIE_1] = {
- .agent = (1 << 0) | (1 << 6),
.cfg = (1 << 0) | (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7) |
(1 << 8) | (1 << 0xc) | (1 << 0xf),
},
static struct pci_info pci_config_info[] =
{
[LAW_TRGT_IF_PCIE_1] = {
- .agent = (1 << 0) | (1 << 1) | (1 << 4) | (1 << 5),
.cfg = (1 << 2) | (1 << 3) | (1 << 7) |
(1 << 0xb) | (1 << 0xc) | (1 << 0xf),
},
[LAW_TRGT_IF_PCIE_2] = {
- .agent = (1 << 0) | (1 << 2) | (1 << 4) | (1 << 6),
.cfg = (1 << 3) | (1 << 7),
},
[LAW_TRGT_IF_PCIE_3] = {
- .agent = (1 << 0) | (1 << 3) | (1 << 5) | (1 << 6),
.cfg = (1 << 7),
},
};
static struct pci_info pci_config_info[] =
{
[LAW_TRGT_IF_PCI_1] = {
- .agent = (1 << 4) | (1 << 5) | (1 << 6),
.cfg = 0,
},
[LAW_TRGT_IF_PCIE_1] = {
- .agent = (1 << 0) | (1 << 2) | (1 << 5),
.cfg = (1 << 1) | (1 << 4),
},
[LAW_TRGT_IF_PCIE_2] = {
- .agent = (1 << 0) | (1 << 1) | (1 << 4),
.cfg = (1 << 0) | (1 << 4),
},
};
static struct pci_info pci_config_info[] =
{
[LAW_TRGT_IF_PCIE_1] = {
- .agent = 0, /* we dont use agent on 8641 */
.cfg = (1 << 2) | (1 << 3) | (1 << 5) | (1 << 6) |
(1 << 7) | (1 << 0xe) | (1 << 0xf),
},
static struct pci_info pci_config_info[] =
{
[LAW_TRGT_IF_PCIE_1] = {
- .agent = (1 << 0) | (1 << 1),
.cfg = (1 << 0) | (1 << 6) | (1 << 0xe) | (1 << 0xf),
},
[LAW_TRGT_IF_PCIE_2] = {
- .agent = (1 << 0) | (1 << 2),
.cfg = (1 << 0xe),
},
};
static struct pci_info pci_config_info[] =
{
[LAW_TRGT_IF_PCIE_1] = {
- .agent = (1 << 0) | (1 << 1) | (1 << 4) | (1 << 5),
.cfg = (1 << 0) | (1 << 2) | (1 << 4) | (1 << 6) |
(1 << 0xd) | (1 << 0xe) | (1 << 0xf),
},
[LAW_TRGT_IF_PCIE_2] = {
- .agent = (1 << 0) | (1 << 2) | (1 << 4) | (1 << 6),
.cfg = (1 << 2) | (1 << 0xe),
},
[LAW_TRGT_IF_PCIE_3] = {
- .agent = (1 << 0) | (1 << 3) | (1 << 5) | (1 << 6),
.cfg = (1 << 2) | (1 << 4),
},
};
+#elif defined(CONFIG_FSL_CORENET)
#else
#error Need to define pci_config_info for processor
#endif
-int is_fsl_pci_agent(enum law_trgt_if trgt, u32 host_agent)
-{
- return ((1 << host_agent) & pci_config_info[trgt].agent);
-}
-
+#ifndef CONFIG_FSL_CORENET
int is_fsl_pci_cfg(enum law_trgt_if trgt, u32 io_sel)
{
return ((1 << io_sel) & pci_config_info[trgt].cfg);
}
+#endif
4321 4321
(where the '*' indicates the position of the tab of the switch.)
+ To boot the image at the beginning of NAND flash, use these
+ DIP switch settings for S3 S4:
+
+ +------+ +------+
+ | * | | *** |
+ | *** | | * |
+ +------+ ON +------+ ON
+ 4321 4321
+ (where the '*' indicates the position of the tab of the switch.)
+
+ When booting from NAND, use u-boot-nand.bin, not u-boot.bin.
+
2. Memory Map
The memory map looks like this:
0xe060_0000 0xe060_7fff NAND FLASH (CS1) 32K
0xfe00_0000 0xfe7f_ffff NOR FLASH (CS0) 8M
+ When booting from NAND, NAND flash is CS0 and NOR flash
+ is CS1.
+
3. Definitions
3.1 Explanation of NEW definitions in:
export CROSS_COMPILE=your-cross-compiler-prefix-
make distclean
- make MPC8315ERDB_config
+ make MPC8315ERDB_config (or MPC8315ERDB_NAND_config for u-boot-nand.bin)
make all
5. Downloading and Flashing Images
5.1 Reflash U-boot Image using U-boot
+ NOR flash:
+
tftp 40000 u-boot.bin
protect off all
erase fe000000 fe1fffff
You have to supply the correct byte count with 'xxxx'
from the TFTP result log.
+ NAND flash:
+
+ =>tftpboot $loadaddr <filename>
+ =>nand erase 0 0x80000
+ =>nand write $loadaddr 0 0x80000
+
+ ...where 0x80000 is the filesize rounded up to
+ the next 0x20000 increment.
+
5.2 Downloading and Booting Linux Kernel
Ensure that all networking-related environment variables are set
6 Notes
- Booting from NAND flash is not yet supported.
The console baudrate for MPC8315ERDB is 115200bps.
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
- * Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
+ * Copyright 2004-2009 Freescale Semiconductor, Inc.
* (C) Copyright 2003, Motorola, Inc.
* author Andy Fleming
*
#ifdef CONFIG_MPC85XX_FEC
{
.regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000),
- .miiregs = (tsec_t *)(TSEC_BASE_ADDR),
+ .miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR),
.devname = CONFIG_MPC85XX_FEC_NAME,
.phyaddr = FEC_PHY_ADDR,
.flags = FEC_FLAGS
privlist[num_tsecs++] = priv;
priv->regs = tsec_info->regs;
priv->phyregs = tsec_info->miiregs;
+ priv->phyregs_sgmii = tsec_info->miiregs_sgmii;
priv->phyaddr = tsec_info->phyaddr;
priv->flags = tsec_info->flags;
}
/* Writes the given phy's reg with value, using the specified MDIO regs */
-static void tsec_local_mdio_write(volatile tsec_t *phyregs, uint addr,
+static void tsec_local_mdio_write(volatile tsec_mdio_t *phyregs, uint addr,
uint reg, uint value)
{
int timeout = 1000000;
* notvalid bit cleared), and the bus to cease activity (miimind
* busy bit cleared), and then returns the value
*/
-uint tsec_local_mdio_read(volatile tsec_t *phyregs, uint phyid, uint regnum)
+uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs, uint phyid, uint regnum)
{
uint value;
{
/* Access TBI PHY registers at given TSEC register offset as opposed to the
* register offset used for external PHY accesses */
- tsec_local_mdio_write(priv->regs, priv->regs->tbipa, TBI_ANA,
+ tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_ANA,
TBIANA_SETTINGS);
- tsec_local_mdio_write(priv->regs, priv->regs->tbipa, TBI_TBICON,
+ tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_TBICON,
TBICON_CLK_SELECT);
- tsec_local_mdio_write(priv->regs, priv->regs->tbipa, TBI_CR,
+ tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_CR,
TBICR_SETTINGS);
}
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct phy_info *curphy;
- volatile tsec_t *phyregs = priv->phyregs;
volatile tsec_t *regs = priv->regs;
/* Assign a Physical address to the TBI */
regs->tbipa = CONFIG_SYS_TBIPA_VALUE;
- phyregs->tbipa = CONFIG_SYS_TBIPA_VALUE;
asm("sync");
/* Reset MII (due to new addresses) */
uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
{
uint phyid;
- volatile tsec_t *regbase = priv->phyregs;
+ volatile tsec_mdio_t *regbase = priv->phyregs;
int timeout = 1000000;
for (phyid = 0; phyid < 4; phyid++) {
{
int i;
uint result;
- volatile tsec_t *phyregs = priv->phyregs;
+ volatile tsec_mdio_t *phyregs = priv->phyregs;
phyregs->miimcfg = MIIMCFG_RESET;
out_be32(&pi->piwar, flag | sz);
}
+int fsl_setup_hose(struct pci_controller *hose, unsigned long addr)
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) addr;
+
+ pci_setup_indirect(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
+
+ return fsl_is_pci_agent(hose);
+}
+
static int fsl_pci_setup_inbound_windows(struct pci_controller *hose,
u64 out_lo, u8 pcie_cap,
volatile pit_t *pi)
# echi
COBJS-$(CONFIG_USB_EHCI) += ehci-hcd.o
COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
+COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
COBJS-$(CONFIG_USB_EHCI_KIRKWOOD) += ehci-kirkwood.o
COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
* root
*/
wait_ms(50);
+ /* terminate the reset */
+ ehci_writel(status_reg, reg & ~EHCI_PS_PR);
+ wait_ms(2);
portreset |= 1 << le16_to_cpu(req->index);
}
break;
--- /dev/null
+/*
+ * (C) Copyright 2010, Chris Zhang <chris@seamicro.com>
+ *
+ * Author: Chris Zhang <chris@seamicro.com>
+ * This code is based on ehci freescale driver
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <usb.h>
+
+#include "ehci.h"
+#include "ehci-core.h"
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(void)
+{
+ hccr = (struct ehci_hccr *)(CONFIG_SYS_PPC4XX_USB_ADDR);
+ hcor = (struct ehci_hcor *)((uint32_t) hccr +
+ HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+ usb_dev_init();
+ return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(void)
+{
+ return 0;
+}
COBJS-$(CONFIG_MUSB_HCD) += musb_hcd.o musb_core.o
COBJS-$(CONFIG_MUSB_UDC) += musb_udc.o musb_core.o
+COBJS-$(CONFIG_USB_BLACKFIN) += blackfin_usb.o
COBJS-$(CONFIG_USB_DAVINCI) += davinci.o
COBJS-$(CONFIG_USB_OMAP3) += omap3.o
+COBJS-$(CONFIG_USB_DA8XX) += da8xx.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
--- /dev/null
+/*
+ * Blackfin MUSB HCD (Host Controller Driver) for u-boot
+ *
+ * Copyright (c) 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+
+#include <usb.h>
+
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/usb.h>
+
+#include "musb_core.h"
+
+/* MUSB platform configuration */
+struct musb_config musb_cfg = {
+ .regs = (struct musb_regs *)USB_FADDR,
+ .timeout = 0x3FFFFFF,
+ .musb_speed = 0,
+};
+
+/*
+ * This function read or write data to endpoint fifo
+ * Blackfin use DMA polling method to avoid buffer alignment issues
+ *
+ * ep - Endpoint number
+ * length - Number of bytes to write to FIFO
+ * fifo_data - Pointer to data buffer to be read/write
+ * is_write - Flag for read or write
+ */
+void rw_fifo(u8 ep, u32 length, void *fifo_data, int is_write)
+{
+ struct bfin_musb_dma_regs *regs;
+ u32 val = (u32)fifo_data;
+
+ blackfin_dcache_flush_invalidate_range(fifo_data, fifo_data + length);
+
+ regs = (void *)USB_DMA_INTERRUPT;
+ regs += ep;
+
+ /* Setup DMA address register */
+ bfin_write16(®s->addr_low, val);
+ SSYNC();
+
+ bfin_write16(®s->addr_high, val >> 16);
+ SSYNC();
+
+ /* Setup DMA count register */
+ bfin_write16(®s->count_low, length);
+ bfin_write16(®s->count_high, 0);
+ SSYNC();
+
+ /* Enable the DMA */
+ val = (ep << 4) | DMA_ENA | INT_ENA;
+ if (is_write)
+ val |= DIRECTION;
+ bfin_write16(®s->control, val);
+ SSYNC();
+
+ /* Wait for compelete */
+ while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << ep)))
+ continue;
+
+ /* acknowledge dma interrupt */
+ bfin_write_USB_DMA_INTERRUPT(1 << ep);
+ SSYNC();
+
+ /* Reset DMA */
+ bfin_write16(®s->control, 0);
+ SSYNC();
+}
+
+void write_fifo(u8 ep, u32 length, void *fifo_data)
+{
+ rw_fifo(ep, length, fifo_data, 1);
+}
+
+void read_fifo(u8 ep, u32 length, void *fifo_data)
+{
+ rw_fifo(ep, length, fifo_data, 0);
+}
+
+
+/*
+ * CPU and board-specific MUSB initializations. Aliased function
+ * signals caller to move on.
+ */
+static void __def_musb_init(void)
+{
+}
+void board_musb_init(void) __attribute__((weak, alias("__def_musb_init")));
+
+int musb_platform_init(void)
+{
+ /* board specific initialization */
+ board_musb_init();
+
+ if (ANOMALY_05000346) {
+ bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
+ SSYNC();
+ }
+
+ if (ANOMALY_05000347) {
+ bfin_write_USB_APHY_CNTRL(0x0);
+ SSYNC();
+ }
+
+ /* Configure PLL oscillator register */
+ bfin_write_USB_PLLOSC_CTRL(0x30a8);
+ SSYNC();
+
+ bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
+ SSYNC();
+
+ bfin_write_USB_EP_NI0_RXMAXP(64);
+ SSYNC();
+
+ bfin_write_USB_EP_NI0_TXMAXP(64);
+ SSYNC();
+
+ /* Route INTRUSB/INTR_RX/INTR_TX to USB_INT0*/
+ bfin_write_USB_GLOBINTR(0x7);
+ SSYNC();
+
+ bfin_write_USB_GLOBAL_CTL(GLOBAL_ENA | EP1_TX_ENA | EP2_TX_ENA |
+ EP3_TX_ENA | EP4_TX_ENA | EP5_TX_ENA |
+ EP6_TX_ENA | EP7_TX_ENA | EP1_RX_ENA |
+ EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
+ EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
+ SSYNC();
+
+ return 0;
+}
+
+/*
+ * This function performs Blackfin platform specific deinitialization for usb.
+*/
+void musb_platform_deinit(void)
+{
+}
--- /dev/null
+/*
+ * Blackfin MUSB HCD (Host Controller Driver) for u-boot
+ *
+ * Copyright (c) 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BLACKFIN_USB_H__
+#define __BLACKFIN_USB_H__
+
+#include <linux/types.h>
+
+/* Every register is 32bit aligned, but only 16bits in size */
+#define ureg(name) u16 name; u16 __pad_##name;
+
+#define musb_regs musb_regs
+struct musb_regs {
+ /* common registers */
+ ureg(faddr)
+ ureg(power)
+ ureg(intrtx)
+ ureg(intrrx)
+ ureg(intrtxe)
+ ureg(intrrxe)
+ ureg(intrusb)
+ ureg(intrusbe)
+ ureg(frame)
+ ureg(index)
+ ureg(testmode)
+ ureg(globintr)
+ ureg(global_ctl)
+ u32 reserved0[3];
+ /* indexed registers */
+ ureg(txmaxp)
+ ureg(txcsr)
+ ureg(rxmaxp)
+ ureg(rxcsr)
+ ureg(rxcount)
+ ureg(txtype)
+ ureg(txinterval)
+ ureg(rxtype)
+ ureg(rxinterval)
+ u32 reserved1;
+ ureg(txcount)
+ u32 reserved2[5];
+ /* fifo */
+ u16 fifox[32];
+ /* OTG, dynamic FIFO, version & vendor registers */
+ u32 reserved3[16];
+ ureg(devctl)
+ ureg(vbus_irq)
+ ureg(vbus_mask)
+ u32 reserved4[15];
+ ureg(linkinfo)
+ ureg(vplen)
+ ureg(hseof1)
+ ureg(fseof1)
+ ureg(lseof1)
+ u32 reserved5[41];
+ /* target address registers */
+ struct musb_tar_regs {
+ ureg(txmaxp)
+ ureg(txcsr)
+ ureg(rxmaxp)
+ ureg(rxcsr)
+ ureg(rxcount)
+ ureg(txtype)
+ ureg(txinternal)
+ ureg(rxtype)
+ ureg(rxinternal)
+ u32 reserved6;
+ ureg(txcount)
+ u32 reserved7[5];
+ } tar[8];
+} __attribute__((packed));
+
+struct bfin_musb_dma_regs {
+ ureg(interrupt);
+ ureg(control);
+ ureg(addr_low);
+ ureg(addr_high);
+ ureg(count_low);
+ ureg(count_high);
+ ureg(pad);
+};
+
+#undef ureg
+
+/* EP5-EP7 are the only ones with 1024 byte FIFOs which BULK really needs */
+#define MUSB_BULK_EP 5
+
+/* Blackfin FIFO's are static */
+#define MUSB_NO_DYNAMIC_FIFO
+
+/* No HUB support :( */
+#define MUSB_NO_MULTIPOINT
+
+#endif
--- /dev/null
+/*
+ * da8xx.c - TI's DA8xx platform specific usb wrapper functions.
+ *
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * Based on drivers/usb/musb/davinci.c
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+
+#include "da8xx.h"
+
+/* MUSB platform configuration */
+struct musb_config musb_cfg = {
+ (struct musb_regs *)DA8XX_USB_OTG_CORE_BASE,
+ DA8XX_USB_OTG_TIMEOUT,
+ 0
+};
+
+/*
+ * This function enables VBUS by driving the GPIO Bank4 Pin 15 high.
+ */
+static void enable_vbus(void)
+{
+ u32 value;
+
+ /* configure GPIO bank4 pin 15 in output direction */
+ value = readl(&davinci_gpio_bank45->dir);
+ writel((value & (~DA8XX_USB_VBUS_GPIO)), &davinci_gpio_bank45->dir);
+
+ /* set GPIO bank4 pin 15 high to drive VBUS */
+ value = readl(&davinci_gpio_bank45->set_data);
+ writel((value | DA8XX_USB_VBUS_GPIO), &davinci_gpio_bank45->set_data);
+}
+
+/*
+ * Enable the usb0 phy. This initialization procedure is explained in
+ * the DA8xx USB user guide document.
+ */
+static u8 phy_on(void)
+{
+ u32 timeout;
+ u32 cfgchip2;
+
+ cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
+
+ cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN |
+ CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ);
+ cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN | CFGCHIP2_PHY_PLLON |
+ CFGCHIP2_REFFREQ_24MHZ;
+
+ writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
+
+ /* wait until the usb phy pll locks */
+ timeout = musb_cfg.timeout;
+ while (timeout--)
+ if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD)
+ return 1;
+
+ /* USB phy was not turned on */
+ return 0;
+}
+
+/*
+ * Disable the usb phy
+ */
+static void phy_off(void)
+{
+ u32 cfgchip2;
+
+ /*
+ * Power down the on-chip PHY.
+ */
+ cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
+ cfgchip2 &= ~CFGCHIP2_PHY_PLLON;
+ cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN;
+ writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
+}
+
+/*
+ * This function performs DA8xx platform specific initialization for usb0.
+ */
+int musb_platform_init(void)
+{
+ u32 revision;
+
+ /* enable psc for usb2.0 */
+ lpsc_on(33);
+
+ /* enable usb vbus */
+ enable_vbus();
+
+ /* reset the controller */
+ writel(0x1, &da8xx_usb_regs->control);
+ udelay(5000);
+
+ /* start the on-chip usb phy and its pll */
+ if (phy_on() == 0)
+ return -1;
+
+ /* Returns zero if e.g. not clocked */
+ revision = readl(&da8xx_usb_regs->revision);
+ if (revision == 0)
+ return -1;
+
+ /* Disable all interrupts */
+ writel((DA8XX_USB_USBINT_MASK | DA8XX_USB_TXINT_MASK |
+ DA8XX_USB_RXINT_MASK), &da8xx_usb_regs->intmsk_set);
+ return 0;
+}
+
+/*
+ * This function performs DA8xx platform specific deinitialization for usb0.
+ */
+void musb_platform_deinit(void)
+{
+ /* Turn of the phy */
+ phy_off();
+
+ /* flush any interrupts */
+ writel((DA8XX_USB_USBINT_MASK | DA8XX_USB_TXINT_MASK |
+ DA8XX_USB_RXINT_MASK), &da8xx_usb_regs->intmsk_clr);
+ writel(0, &da8xx_usb_regs->eoi);
+}
--- /dev/null
+/*
+ * da8xx.h -- TI's DA8xx platform specific usb wrapper definitions.
+ *
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * Based on drivers/usb/musb/davinci.h
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __DA8XX_MUSB_H__
+#define __DA8XX_MUSB_H__
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/gpio_defs.h>
+#include "musb_core.h"
+
+/* Base address of da8xx usb0 wrapper */
+#define DA8XX_USB_OTG_BASE 0x01E00000
+
+/* Base address of da8xx musb core */
+#define DA8XX_USB_OTG_CORE_BASE (DA8XX_USB_OTG_BASE + 0x400)
+
+/* Timeout for DA8xx usb module */
+#define DA8XX_USB_OTG_TIMEOUT 0x3FFFFFF
+
+/*
+ * DA8xx platform USB wrapper register overlay.
+ */
+struct da8xx_usb_regs {
+ dv_reg revision;
+ dv_reg control;
+ dv_reg status;
+ dv_reg emulation;
+ dv_reg mode;
+ dv_reg autoreq;
+ dv_reg srpfixtime;
+ dv_reg teardown;
+ dv_reg intsrc;
+ dv_reg intsrc_set;
+ dv_reg intsrc_clr;
+ dv_reg intmsk;
+ dv_reg intmsk_set;
+ dv_reg intmsk_clr;
+ dv_reg intsrcmsk;
+ dv_reg eoi;
+ dv_reg intvector;
+ dv_reg grndis_size[4];
+};
+
+#define da8xx_usb_regs ((struct da8xx_usb_regs *)DA8XX_USB_OTG_BASE)
+
+/* DA8XX interrupt bits definitions */
+#define DA8XX_USB_TX_ENDPTS_MASK 0x1f /* ep0 + 4 tx */
+#define DA8XX_USB_RX_ENDPTS_MASK 0x1e /* 4 rx */
+#define DA8XX_USB_TXINT_SHIFT 0
+#define DA8XX_USB_RXINT_SHIFT 8
+
+#define DA8XX_USB_USBINT_MASK 0x01ff0000 /* 8 Mentor, DRVVBUS */
+#define DA8XX_USB_TXINT_MASK \
+ (DA8XX_USB_TX_ENDPTS_MASK << DA8XX_USB_TXINT_SHIFT)
+#define DA8XX_USB_RXINT_MASK \
+ (DA8XX_USB_RX_ENDPTS_MASK << DA8XX_USB_RXINT_SHIFT)
+
+/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
+#define CFGCHIP2_PHYCLKGD (1 << 17)
+#define CFGCHIP2_VBUSSENSE (1 << 16)
+#define CFGCHIP2_RESET (1 << 15)
+#define CFGCHIP2_OTGMODE (3 << 13)
+#define CFGCHIP2_NO_OVERRIDE (0 << 13)
+#define CFGCHIP2_FORCE_HOST (1 << 13)
+#define CFGCHIP2_FORCE_DEVICE (2 << 13)
+#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
+#define CFGCHIP2_USB1PHYCLKMUX (1 << 12)
+#define CFGCHIP2_USB2PHYCLKMUX (1 << 11)
+#define CFGCHIP2_PHYPWRDN (1 << 10)
+#define CFGCHIP2_OTGPWRDN (1 << 9)
+#define CFGCHIP2_DATPOL (1 << 8)
+#define CFGCHIP2_USB1SUSPENDM (1 << 7)
+#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */
+#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */
+#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */
+#define CFGCHIP2_REFFREQ (0xf << 0)
+#define CFGCHIP2_REFFREQ_12MHZ (1 << 0)
+#define CFGCHIP2_REFFREQ_24MHZ (2 << 0)
+#define CFGCHIP2_REFFREQ_48MHZ (3 << 0)
+
+#define DA8XX_USB_VBUS_GPIO (1 << 15)
+#endif /* __DA8XX_MUSB_H__ */
+
#endif
}
+#ifdef MUSB_NO_DYNAMIC_FIFO
+# define config_fifo(dir, idx, addr)
+#else
+# define config_fifo(dir, idx, addr) \
+ do { \
+ writeb(idx, &musbr->dir##fifosz); \
+ writew(fifoaddr >> 3, &musbr->dir##fifoadd); \
+ } while (0)
+#endif
+
/*
* This function configures the endpoint configuration. The musb hcd or musb
* device implementation can use this function to configure the endpoints
writeb(epinfo->epnum, &musbr->index);
if (epinfo->epdir) {
/* Configure fifo size and fifo base address */
- writeb(idx, &musbr->txfifosz);
- writew(fifoaddr >> 3, &musbr->txfifoadd);
+ config_fifo(tx, idx, fifoaddr);
csr = readw(&musbr->txcsr);
#if defined(CONFIG_MUSB_HCD)
&musbr->txcsr);
} else {
/* Configure fifo size and fifo base address */
- writeb(idx, &musbr->rxfifosz);
- writew(fifoaddr >> 3, &musbr->rxfifoadd);
+ config_fifo(rx, idx, fifoaddr);
csr = readw(&musbr->rxcsr);
#if defined(CONFIG_MUSB_HCD)
* length - number of bytes to write to FIFO
* fifo_data - Pointer to data buffer that contains the data to write
*/
+__attribute__((weak))
void write_fifo(u8 ep, u32 length, void *fifo_data)
{
u8 *data = (u8 *)fifo_data;
* length - number of bytes to read from FIFO
* fifo_data - pointer to data buffer into which data is read
*/
+__attribute__((weak))
void read_fifo(u8 ep, u32 length, void *fifo_data)
{
u8 *data = (u8 *)fifo_data;
#include <usb_defs.h>
#include <asm/io.h>
+#ifdef CONFIG_USB_BLACKFIN
+# include "blackfin_usb.h"
+#endif
+
#define MUSB_EP0_FIFOSIZE 64 /* This is non-configurable */
/* EP0 */
};
/* Mentor USB core register overlay structure */
+#ifndef musb_regs
struct musb_regs {
/* common registers */
u8 faddr;
struct musb_epN_regs epN;
} ep[16];
-} __attribute__((aligned(32)));
+} __attribute__((packed, aligned(32)));
+#endif
/*
* MUSB Register bits
extern void write_fifo(u8 ep, u32 length, void *fifo_data);
extern void read_fifo(u8 ep, u32 length, void *fifo_data);
+#if defined(CONFIG_USB_BLACKFIN)
+/* Every USB register is accessed as a 16-bit even if the value itself
+ * is only 8-bits in size. Fun stuff.
+ */
+# undef readb
+# define readb(addr) (u8)bfin_read16(addr)
+# undef writeb
+# define writeb(b, addr) bfin_write16(addr, b)
+#endif
+
#endif /* __MUSB_HDRC_DEFS_H__ */
{MUSB_INTR_EP, 0, 64} /* EP2 - Interrupt IN - 64 Bytes */
};
+/* --- Virtual Root Hub ---------------------------------------------------- */
+#ifdef MUSB_NO_MULTIPOINT
+static int rh_devnum;
+static u32 port_status;
+
+/* Device descriptor */
+static u8 root_hub_dev_des[] = {
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x00, /* __u16 bcdUSB; v1.1 */
+ 0x02,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x00, /* __u8 iManufacturer; */
+ 0x01, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static u8 root_hub_config_des[] = {
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x00, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+ 0x02,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] = {
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static unsigned char root_hub_str_index1[] = {
+ 0x1c, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'M', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'U', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'S', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'B', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+#endif
+
/*
* This function writes the data toggle value.
*/
if (dev->parent->children[chid] == dev)
break;
+#ifndef MUSB_NO_MULTIPOINT
/* configure the hub address and the port address */
writeb(hub, &musbr->tar[ep].txhubaddr);
writeb((chid + 1), &musbr->tar[ep].txhubport);
writeb(hub, &musbr->tar[ep].rxhubaddr);
writeb((chid + 1), &musbr->tar[ep].rxhubport);
+#endif
+}
+
+#ifdef MUSB_NO_MULTIPOINT
+
+static void musb_port_reset(int do_reset)
+{
+ u8 power = readb(&musbr->power);
+
+ if (do_reset) {
+ power &= 0xf0;
+ writeb(power | MUSB_POWER_RESET, &musbr->power);
+ port_status |= USB_PORT_STAT_RESET;
+ port_status &= ~USB_PORT_STAT_ENABLE;
+ udelay(30000);
+ } else {
+ writeb(power & ~MUSB_POWER_RESET, &musbr->power);
+
+ power = readb(&musbr->power);
+ if (power & MUSB_POWER_HSMODE)
+ port_status |= USB_PORT_STAT_HIGH_SPEED;
+
+ port_status &= ~(USB_PORT_STAT_RESET | (USB_PORT_STAT_C_CONNECTION << 16));
+ port_status |= USB_PORT_STAT_ENABLE
+ | (USB_PORT_STAT_C_RESET << 16)
+ | (USB_PORT_STAT_C_ENABLE << 16);
+ }
}
+/*
+ * root hub control
+ */
+static int musb_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len,
+ struct devrequest *cmd)
+{
+ int leni = transfer_len;
+ int len = 0;
+ int stat = 0;
+ u32 datab[4];
+ u8 *data_buf = (u8 *) datab;
+ u16 bmRType_bReq;
+ u16 wValue;
+ u16 wIndex;
+ u16 wLength;
+ u16 int_usb;
+
+ if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+ debug("Root-Hub submit IRQ: NOT implemented\n");
+ return 0;
+ }
+
+ bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+ wValue = swap_16(cmd->value);
+ wIndex = swap_16(cmd->index);
+ wLength = swap_16(cmd->length);
+
+ debug("--- HUB ----------------------------------------\n");
+ debug("submit rh urb, req=%x val=%#x index=%#x len=%d\n",
+ bmRType_bReq, wValue, wIndex, wLength);
+ debug("------------------------------------------------\n");
+
+ switch (bmRType_bReq) {
+ case RH_GET_STATUS:
+ debug("RH_GET_STATUS\n");
+
+ *(__u16 *) data_buf = swap_16(1);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_INTERFACE:
+ debug("RH_GET_STATUS | RH_INTERFACE\n");
+
+ *(__u16 *) data_buf = swap_16(0);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_ENDPOINT:
+ debug("RH_GET_STATUS | RH_ENDPOINT\n");
+
+ *(__u16 *) data_buf = swap_16(0);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_CLASS:
+ debug("RH_GET_STATUS | RH_CLASS\n");
+
+ *(__u32 *) data_buf = swap_32(0);
+ len = 4;
+ break;
+
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ debug("RH_GET_STATUS | RH_OTHER | RH_CLASS\n");
+
+ int_usb = readw(&musbr->intrusb);
+ if (int_usb & MUSB_INTR_CONNECT) {
+ port_status |= USB_PORT_STAT_CONNECTION
+ | (USB_PORT_STAT_C_CONNECTION << 16);
+ port_status |= USB_PORT_STAT_HIGH_SPEED
+ | USB_PORT_STAT_ENABLE;
+ }
+
+ if (port_status & USB_PORT_STAT_RESET)
+ musb_port_reset(0);
+
+ *(__u32 *) data_buf = swap_32(port_status);
+ len = 4;
+ break;
+
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ debug("RH_CLEAR_FEATURE | RH_ENDPOINT\n");
+
+ switch (wValue) {
+ case RH_ENDPOINT_STALL:
+ debug("C_HUB_ENDPOINT_STALL\n");
+ len = 0;
+ break;
+ }
+ port_status &= ~(1 << wValue);
+ break;
+
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ debug("RH_CLEAR_FEATURE | RH_CLASS\n");
+
+ switch (wValue) {
+ case RH_C_HUB_LOCAL_POWER:
+ debug("C_HUB_LOCAL_POWER\n");
+ len = 0;
+ break;
+
+ case RH_C_HUB_OVER_CURRENT:
+ debug("C_HUB_OVER_CURRENT\n");
+ len = 0;
+ break;
+ }
+ port_status &= ~(1 << wValue);
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ debug("RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS\n");
+
+ switch (wValue) {
+ case RH_PORT_ENABLE:
+ len = 0;
+ break;
+
+ case RH_PORT_SUSPEND:
+ len = 0;
+ break;
+
+ case RH_PORT_POWER:
+ len = 0;
+ break;
+
+ case RH_C_PORT_CONNECTION:
+ len = 0;
+ break;
+
+ case RH_C_PORT_ENABLE:
+ len = 0;
+ break;
+
+ case RH_C_PORT_SUSPEND:
+ len = 0;
+ break;
+
+ case RH_C_PORT_OVER_CURRENT:
+ len = 0;
+ break;
+
+ case RH_C_PORT_RESET:
+ len = 0;
+ break;
+
+ default:
+ debug("invalid wValue\n");
+ stat = USB_ST_STALLED;
+ }
+
+ port_status &= ~(1 << wValue);
+ break;
+
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ debug("RH_SET_FEATURE | RH_OTHER | RH_CLASS\n");
+
+ switch (wValue) {
+ case RH_PORT_SUSPEND:
+ len = 0;
+ break;
+
+ case RH_PORT_RESET:
+ musb_port_reset(1);
+ len = 0;
+ break;
+
+ case RH_PORT_POWER:
+ len = 0;
+ break;
+
+ case RH_PORT_ENABLE:
+ len = 0;
+ break;
+
+ default:
+ debug("invalid wValue\n");
+ stat = USB_ST_STALLED;
+ }
+
+ port_status |= 1 << wValue;
+ break;
+
+ case RH_SET_ADDRESS:
+ debug("RH_SET_ADDRESS\n");
+
+ rh_devnum = wValue;
+ len = 0;
+ break;
+
+ case RH_GET_DESCRIPTOR:
+ debug("RH_GET_DESCRIPTOR: %x, %d\n", wValue, wLength);
+
+ switch (wValue) {
+ case (USB_DT_DEVICE << 8): /* device descriptor */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_dev_des),
+ wLength));
+ data_buf = root_hub_dev_des;
+ break;
+
+ case (USB_DT_CONFIG << 8): /* configuration descriptor */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_config_des),
+ wLength));
+ data_buf = root_hub_config_des;
+ break;
+
+ case ((USB_DT_STRING << 8) | 0x00): /* string 0 descriptors */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_str_index0),
+ wLength));
+ data_buf = root_hub_str_index0;
+ break;
+
+ case ((USB_DT_STRING << 8) | 0x01): /* string 1 descriptors */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_str_index1),
+ wLength));
+ data_buf = root_hub_str_index1;
+ break;
+
+ default:
+ debug("invalid wValue\n");
+ stat = USB_ST_STALLED;
+ }
+
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ debug("RH_GET_DESCRIPTOR | RH_CLASS\n");
+
+ data_buf[0] = 0x09; /* min length; */
+ data_buf[1] = 0x29;
+ data_buf[2] = 0x1; /* 1 port */
+ data_buf[3] = 0x01; /* per-port power switching */
+ data_buf[3] |= 0x10; /* no overcurrent reporting */
+
+ /* Corresponds to data_buf[4-7] */
+ data_buf[4] = 0;
+ data_buf[5] = 5;
+ data_buf[6] = 0;
+ data_buf[7] = 0x02;
+ data_buf[8] = 0xff;
+
+ len = min_t(unsigned int, leni,
+ min_t(unsigned int, data_buf[0], wLength));
+ break;
+
+ case RH_GET_CONFIGURATION:
+ debug("RH_GET_CONFIGURATION\n");
+
+ *(__u8 *) data_buf = 0x01;
+ len = 1;
+ break;
+
+ case RH_SET_CONFIGURATION:
+ debug("RH_SET_CONFIGURATION\n");
+
+ len = 0;
+ break;
+
+ default:
+ debug("*** *** *** unsupported root hub command *** *** ***\n");
+ stat = USB_ST_STALLED;
+ }
+
+ len = min_t(int, len, leni);
+ if (buffer != data_buf)
+ memcpy(buffer, data_buf, len);
+
+ dev->act_len = len;
+ dev->status = stat;
+ debug("dev act_len %d, status %d\n", dev->act_len, dev->status);
+
+ return stat;
+}
+
+static void musb_rh_init(void)
+{
+ rh_devnum = 0;
+ port_status = 0;
+}
+
+#else
+
+static void musb_rh_init(void) {}
+
+#endif
+
/*
* do a control transfer
*/
u16 csr;
u8 devspeed;
+#ifdef MUSB_NO_MULTIPOINT
+ /* Control message is for the HUB? */
+ if (devnum == rh_devnum)
+ return musb_submit_rh_msg(dev, pipe, buffer, len, setup);
+#endif
+
/* select control endpoint */
writeb(MUSB_CONTROL_EP, &musbr->index);
csr = readw(&musbr->txcsr);
+#ifndef MUSB_NO_MULTIPOINT
/* target addr and (for multipoint) hub addr/port */
writeb(devnum, &musbr->tar[MUSB_CONTROL_EP].txfuncaddr);
writeb(devnum, &musbr->tar[MUSB_CONTROL_EP].rxfuncaddr);
+#endif
/* configure the hub address and the port number as required */
devspeed = get_dev_speed(dev);
writeb(devspeed << 6, &musbr->txtype);
} else {
writeb(musb_cfg.musb_speed << 6, &musbr->txtype);
+#ifndef MUSB_NO_MULTIPOINT
writeb(0, &musbr->tar[MUSB_CONTROL_EP].txhubaddr);
writeb(0, &musbr->tar[MUSB_CONTROL_EP].txhubport);
writeb(0, &musbr->tar[MUSB_CONTROL_EP].rxhubaddr);
writeb(0, &musbr->tar[MUSB_CONTROL_EP].rxhubport);
+#endif
}
/* Control transfer setup phase */
{
int dir_out = usb_pipeout(pipe);
int ep = usb_pipeendpoint(pipe);
+#ifndef MUSB_NO_MULTIPOINT
int devnum = usb_pipedevice(pipe);
+#endif
u8 type;
u16 csr;
u32 txlen = 0;
/* select bulk endpoint */
writeb(MUSB_BULK_EP, &musbr->index);
+#ifndef MUSB_NO_MULTIPOINT
/* write the address of the device */
if (dir_out)
writeb(devnum, &musbr->tar[MUSB_BULK_EP].txfuncaddr);
else
writeb(devnum, &musbr->tar[MUSB_BULK_EP].rxfuncaddr);
+#endif
/* configure the hub address and the port number as required */
devspeed = get_dev_speed(dev);
*/
config_hub_port(dev, MUSB_BULK_EP);
} else {
+#ifndef MUSB_NO_MULTIPOINT
if (dir_out) {
writeb(0, &musbr->tar[MUSB_BULK_EP].txhubaddr);
writeb(0, &musbr->tar[MUSB_BULK_EP].txhubport);
writeb(0, &musbr->tar[MUSB_BULK_EP].rxhubaddr);
writeb(0, &musbr->tar[MUSB_BULK_EP].rxhubport);
}
+#endif
devspeed = musb_cfg.musb_speed;
}
(len-txlen) : dev->epmaxpacketin[ep];
/* Set the ReqPkt bit */
- writew(MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
+ csr = readw(&musbr->rxcsr);
+ writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
/* Wait until the RxPktRdy bit is set */
if (!wait_until_rxep_ready(dev, MUSB_BULK_EP)) {
u8 power;
u32 timeout;
+ musb_rh_init();
+
if (musb_platform_init() == -1)
return -1;
{
int dir_out = usb_pipeout(pipe);
int ep = usb_pipeendpoint(pipe);
+#ifndef MUSB_NO_MULTIPOINT
int devnum = usb_pipedevice(pipe);
+#endif
u8 type;
u16 csr;
u32 txlen = 0;
/* select interrupt endpoint */
writeb(MUSB_INTR_EP, &musbr->index);
+#ifndef MUSB_NO_MULTIPOINT
/* write the address of the device */
if (dir_out)
writeb(devnum, &musbr->tar[MUSB_INTR_EP].txfuncaddr);
else
writeb(devnum, &musbr->tar[MUSB_INTR_EP].rxfuncaddr);
+#endif
/* configure the hub address and the port number as required */
devspeed = get_dev_speed(dev);
*/
config_hub_port(dev, MUSB_INTR_EP);
} else {
+#ifndef MUSB_NO_MULTIPOINT
if (dir_out) {
writeb(0, &musbr->tar[MUSB_INTR_EP].txhubaddr);
writeb(0, &musbr->tar[MUSB_INTR_EP].txhubport);
writeb(0, &musbr->tar[MUSB_INTR_EP].rxhubaddr);
writeb(0, &musbr->tar[MUSB_INTR_EP].rxhubport);
}
+#endif
devspeed = musb_cfg.musb_speed;
}
(len-txlen) : dev->epmaxpacketin[ep];
/* Set the ReqPkt bit */
- writew(MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
+ csr = readw(&musbr->rxcsr);
+ writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
/* Wait until the RxPktRdy bit is set */
if (!wait_until_rxep_ready(dev, MUSB_INTR_EP)) {
#define MUSB_CONTROL_EP 0
/* This defines the endpoint number used for bulk transfer */
-#define MUSB_BULK_EP 1
+#ifndef MUSB_BULK_EP
+# define MUSB_BULK_EP 1
+#endif
/* This defines the endpoint number used for interrupt transfer */
#define MUSB_INTR_EP 2
((readb(&musbr->power) & MUSB_POWER_HSMODE) \
>> MUSB_POWER_HSMODE_SHIFT)
+#define min_t(type, x, y) \
+ ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
+
+/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
+
+/* destination of request */
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
+
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP 0x2000
+
+/* Hub port features */
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
+
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
+
/* extern functions */
extern int musb_platform_init(void);
extern void musb_platform_deinit(void);
}
ret = platform_needs_initialization;
+
+#ifdef CONFIG_TWL4030_USB
end:
+#endif
return ret;
}
#ifndef _GPIO_DEFS_H_
#define _GPIO_DEFS_H_
+#ifndef CONFIG_SOC_DA8XX
#define DAVINCI_GPIO_BINTEN 0x01C67008
#define DAVINCI_GPIO_BANK01 0x01C67010
#define DAVINCI_GPIO_BANK23 0x01C67038
#define DAVINCI_GPIO_BANK45 0x01C67060
#define DAVINCI_GPIO_BANK67 0x01C67088
+#else /* CONFIG_SOC_DA8XX */
+#define DAVINCI_GPIO_BINTEN 0x01E26008
+#define DAVINCI_GPIO_BANK01 0x01E26010
+#define DAVINCI_GPIO_BANK23 0x01E26038
+#define DAVINCI_GPIO_BANK45 0x01E26060
+#define DAVINCI_GPIO_BANK67 0x01E26088
+#endif /* CONFIG_SOC_DA8XX */
+
struct davinci_gpio {
unsigned int dir;
unsigned int out_data;
unsigned long base;
};
+#define davinci_gpio_bank01 ((struct davinci_gpio *)DAVINCI_GPIO_BANK01)
+#define davinci_gpio_bank23 ((struct davinci_gpio *)DAVINCI_GPIO_BANK23)
+#define davinci_gpio_bank45 ((struct davinci_gpio *)DAVINCI_GPIO_BANK45)
+#define davinci_gpio_bank67 ((struct davinci_gpio *)DAVINCI_GPIO_BANK67)
+
#endif
--- /dev/null
+/*
+ * USB Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_USB__
+#define __BFIN_PERIPHERAL_USB__
+
+/* Bit masks for USB_FADDR */
+
+#define FUNCTION_ADDRESS 0x7f /* Function address */
+
+/* Bit masks for USB_POWER */
+
+#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
+#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
+#define RESUME_MODE 0x4 /* DMA Mode */
+#define RESET 0x8 /* Reset indicator */
+#define HS_MODE 0x10 /* High Speed mode indicator */
+#define HS_ENABLE 0x20 /* high Speed Enable */
+#define SOFT_CONN 0x40 /* Soft connect */
+#define ISO_UPDATE 0x80 /* Isochronous update */
+
+/* Bit masks for USB_INTRTX */
+
+#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
+#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
+#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
+#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
+#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
+#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
+#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
+#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRRX */
+
+#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
+#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
+#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
+#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
+#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
+#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
+#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRTXE */
+
+#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
+#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt enable */
+#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt enable */
+#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt enable */
+#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt enable */
+#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt enable */
+#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt enable */
+#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt enable */
+
+/* Bit masks for USB_INTRRXE */
+
+#define EP1_RX_E 0x02 /* Rx Endpoint 1 interrupt enable */
+#define EP2_RX_E 0x04 /* Rx Endpoint 2 interrupt enable */
+#define EP3_RX_E 0x08 /* Rx Endpoint 3 interrupt enable */
+#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt enable */
+#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt enable */
+#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt enable */
+#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt enable */
+
+/* Bit masks for USB_INTRUSB */
+
+#define SUSPEND_B 0x01 /* Suspend indicator */
+#define RESUME_B 0x02 /* Resume indicator */
+#define RESET_OR_BABLE_B 0x04 /* Reset/babble indicator */
+#define SOF_B 0x08 /* Start of frame */
+#define CONN_B 0x10 /* Connection indicator */
+#define DISCON_B 0x20 /* Disconnect indicator */
+#define SESSION_REQ_B 0x40 /* Session Request */
+#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
+
+/* Bit masks for USB_INTRUSBE */
+
+#define SUSPEND_BE 0x01 /* Suspend indicator int enable */
+#define RESUME_BE 0x02 /* Resume indicator int enable */
+#define RESET_OR_BABLE_BE 0x04 /* Reset/babble indicator int enable */
+#define SOF_BE 0x08 /* Start of frame int enable */
+#define CONN_BE 0x10 /* Connection indicator int enable */
+#define DISCON_BE 0x20 /* Disconnect indicator int enable */
+#define SESSION_REQ_BE 0x40 /* Session Request int enable */
+#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
+
+/* Bit masks for USB_FRAME */
+
+#define FRAME_NUMBER 0x7ff /* Frame number */
+
+/* Bit masks for USB_INDEX */
+
+#define SELECTED_ENDPOINT 0xf /* selected endpoint */
+
+/* Bit masks for USB_GLOBAL_CTL */
+
+#define GLOBAL_ENA 0x0001 /* enables USB module */
+#define EP1_TX_ENA 0x0002 /* Transmit endpoint 1 enable */
+#define EP2_TX_ENA 0x0004 /* Transmit endpoint 2 enable */
+#define EP3_TX_ENA 0x0008 /* Transmit endpoint 3 enable */
+#define EP4_TX_ENA 0x0010 /* Transmit endpoint 4 enable */
+#define EP5_TX_ENA 0x0020 /* Transmit endpoint 5 enable */
+#define EP6_TX_ENA 0x0040 /* Transmit endpoint 6 enable */
+#define EP7_TX_ENA 0x0080 /* Transmit endpoint 7 enable */
+#define EP1_RX_ENA 0x0100 /* Receive endpoint 1 enable */
+#define EP2_RX_ENA 0x0200 /* Receive endpoint 2 enable */
+#define EP3_RX_ENA 0x0400 /* Receive endpoint 3 enable */
+#define EP4_RX_ENA 0x0800 /* Receive endpoint 4 enable */
+#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
+#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
+#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
+
+/* Bit masks for USB_OTG_DEV_CTL */
+
+#define SESSION 0x1 /* session indicator */
+#define HOST_REQ 0x2 /* Host negotiation request */
+#define HOST_MODE 0x4 /* indicates USBDRC is a host */
+#define VBUS0 0x8 /* Vbus level indicator[0] */
+#define VBUS1 0x10 /* Vbus level indicator[1] */
+#define LSDEV 0x20 /* Low-speed indicator */
+#define FSDEV 0x40 /* Full or High-speed indicator */
+#define B_DEVICE 0x80 /* A' or 'B' device indicator */
+
+/* Bit masks for USB_OTG_VBUS_IRQ */
+
+#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
+#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
+#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
+#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
+#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
+#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
+
+/* Bit masks for USB_OTG_VBUS_MASK */
+
+#define DRIVE_VBUS_ON_ENA 0x01 /* enable DRIVE_VBUS_ON interrupt */
+#define DRIVE_VBUS_OFF_ENA 0x02 /* enable DRIVE_VBUS_OFF interrupt */
+#define CHRG_VBUS_START_ENA 0x04 /* enable CHRG_VBUS_START interrupt */
+#define CHRG_VBUS_END_ENA 0x08 /* enable CHRG_VBUS_END interrupt */
+#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
+#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
+
+/* Bit masks for USB_CSR0 */
+
+#define RXPKTRDY 0x1 /* data packet receive indicator */
+#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
+#define STALL_SENT 0x4 /* STALL handshake sent */
+#define DATAEND 0x8 /* Data end indicator */
+#define SETUPEND 0x10 /* Setup end */
+#define SENDSTALL 0x20 /* Send STALL handshake */
+#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
+#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
+#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
+#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
+#define SETUPPKT_H 0x8 /* send Setup token host mode */
+#define ERROR_H 0x10 /* timeout error indicator host mode */
+#define REQPKT_H 0x20 /* Request an IN transaction host mode */
+#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
+#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
+
+/* Bit masks for USB_COUNT0 */
+
+#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
+
+/* Bit masks for USB_NAKLIMIT0 */
+
+#define EP0_NAK_LIMIT 0x1f /* frames/micro frames count after which EP0 timeouts */
+
+/* Bit masks for USB_TX_MAX_PACKET */
+
+#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
+
+/* Bit masks for USB_RX_MAX_PACKET */
+
+#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
+
+/* Bit masks for USB_TXCSR */
+
+#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
+#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
+#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
+#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
+#define STALL_SEND_T 0x10 /* issue a Stall handshake */
+#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
+#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
+#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
+#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
+#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
+#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
+#define ISO_T 0x4000 /* enable Isochronous transfers */
+#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
+#define ERROR_TH 0x4 /* error condition host mode */
+#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
+#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
+
+/* Bit masks for USB_TXCOUNT */
+
+#define TX_COUNT 0x1fff /* Byte len for the selected endpoint Tx FIFO */
+
+/* Bit masks for USB_RXCSR */
+
+#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
+#define FIFO_FULL_R 0x2 /* FIFO not empty */
+#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
+#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
+#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
+#define STALL_SEND_R 0x20 /* issue a Stall handshake */
+#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
+#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
+#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
+#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
+#define DISNYET_R 0x1000 /* disable Nyet handshakes */
+#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
+#define ISO_R 0x4000 /* enable Isochronous transfers */
+#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
+#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
+#define REQPKT_RH 0x20 /* request an IN transaction host mode */
+#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
+#define INCOMPRX_RH 0x100 /* large packet is split host mode */
+#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
+#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
+
+/* Bit masks for USB_RXCOUNT */
+
+#define RX_COUNT 0x1fff /* Packet byte len in the Rx FIFO */
+
+/* Bit masks for USB_TXTYPE */
+
+#define TARGET_EP_NO_T 0xf /* EP number */
+#define PROTOCOL_T 0xc /* transfer type */
+
+/* Bit masks for USB_TXINTERVAL */
+
+#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
+
+/* Bit masks for USB_RXTYPE */
+
+#define TARGET_EP_NO_R 0xf /* EP number */
+#define PROTOCOL_R 0xc /* transfer type */
+
+/* Bit masks for USB_RXINTERVAL */
+
+#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
+
+/* Bit masks for USB_DMA_INTERRUPT */
+
+#define DMA0_INT 0x1 /* DMA0 pending interrupt */
+#define DMA1_INT 0x2 /* DMA1 pending interrupt */
+#define DMA2_INT 0x4 /* DMA2 pending interrupt */
+#define DMA3_INT 0x8 /* DMA3 pending interrupt */
+#define DMA4_INT 0x10 /* DMA4 pending interrupt */
+#define DMA5_INT 0x20 /* DMA5 pending interrupt */
+#define DMA6_INT 0x40 /* DMA6 pending interrupt */
+#define DMA7_INT 0x80 /* DMA7 pending interrupt */
+
+/* Bit masks for USB_DMAxCONTROL */
+
+#define DMA_ENA 0x1 /* DMA enable */
+#define DIRECTION 0x2 /* direction of DMA transfer */
+#define MODE 0x4 /* DMA Bus error */
+#define INT_ENA 0x8 /* Interrupt enable */
+#define EPNUM 0xf0 /* EP number */
+#define BUSERROR 0x100 /* DMA Bus error */
+
+#endif
#endif
#endif
+/* Enable TSEC2.0 for the platforms that have it if we are using TSEC */
+#if defined(CONFIG_TSEC_ENET) && \
+ (defined(CONFIG_P1020) || defined(CONFIG_P1011))
+#define CONFIG_TSECV2
+#endif
+
+/* Number of TLB CAM entries we have on FSL Book-E chips */
+#if defined(CONFIG_E500MC)
+#define CONFIG_SYS_NUM_TLBCAMS 64
+#elif defined(CONFIG_E500)
+#define CONFIG_SYS_NUM_TLBCAMS 16
+#endif
+
/* Relocation to SDRAM works on all PPC boards */
#define CONFIG_RELOC_FIXUP_WORKS
/*
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
unsigned int clk_adjust; /* */
unsigned int cpo_override;
unsigned int write_data_delay; /* DQS adjust */
+
+ unsigned int wrlvl_override;
+ unsigned int wrlvl_sample; /* Write leveling */
+ unsigned int wrlvl_start;
+
unsigned int half_strength_driver_enable;
unsigned int twoT_en;
unsigned int threeT_en;
/* Rtt impedance */
unsigned int rtt_override; /* rtt_override enable */
unsigned int rtt_override_value; /* that is Rtt_Nom for DDR3 */
+ unsigned int rtt_wr_override_value; /* this is Rtt_WR for DDR3 */
/* Automatic self refresh */
unsigned int auto_self_refresh_en;
LAW_SIZE_32G,
};
+#define law_size_bits(sz) (__ilog2_u64(sz) - 1)
+
#ifdef CONFIG_FSL_CORENET
enum law_trgt_if {
LAW_TRGT_IF_PCIE_1 = 0x00,
LAW_TRGT_IF_CCSR = 0x08,
LAW_TRGT_IF_DDR_INTRLV = 0x0b,
LAW_TRGT_IF_RIO = 0x0c,
+ LAW_TRGT_IF_RIO_2 = 0x0d,
LAW_TRGT_IF_DDR = 0x0f,
LAW_TRGT_IF_DDR_2 = 0x16, /* 2nd controller */
};
-/* (C) Copyright 2007 Freescale Semiconductor, Inc.
+/*
+ * Copyright 2007,2009 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
#include <asm/fsl_law.h>
-int is_fsl_pci_agent(enum law_trgt_if trgt, u32 host_agent);
int is_fsl_pci_cfg(enum law_trgt_if trgt, u32 io_sel);
+int fsl_setup_hose(struct pci_controller *hose, unsigned long addr);
int fsl_is_pci_agent(struct pci_controller *hose);
void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data);
void fsl_pci_config_unlock(struct pci_controller *hose);
#if defined(CONFIG_FSL_LAW)
u32 used_laws;
#endif
+#if defined(CONFIG_E500)
+ u32 used_tlb_cams[(CONFIG_SYS_NUM_TLBCAMS+31)/32];
+#endif
#if defined(CONFIG_MPC5xxx)
unsigned long ipb_clk;
unsigned long pci_clk;
/*
- * (C) Copyright 2004-2009 Freescale Semiconductor, Inc.
+ * Copyright 2004-2009 Freescale Semiconductor, Inc.
*
* MPC83xx Internal Memory Map
*
#endif
#define CONFIG_SYS_MPC83xx_USB_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET)
+
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#define CONFIG_SYS_MDIO1_OFFSET 0x24000
+
+#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
#endif /* __IMMAP_83xx__ */
* Copyright(c) 2002,2003 Motorola Inc.
* Xianghua Xiao (x.xiao@motorola.com)
*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
*/
#ifndef __IMMAP_85xx__
u8 res[8];
} par_io_t;
+#ifdef CONFIG_SYS_FSL_CPC
+/*
+ * Define a single offset that is the start of all the CPC register
+ * blocks - if there is more than one CPC, we expect these to be
+ * contiguous 4k regions
+ */
+
+typedef struct cpc_corenet {
+ u32 cpccsr0; /* Config/status reg */
+ u32 res1;
+ u32 cpccfg0; /* Configuration register */
+ u32 res2;
+ u32 cpcewcr0; /* External Write reg 0 */
+ u32 cpcewabr0; /* External write base reg 0 */
+ u32 res3[2];
+ u32 cpcewcr1; /* External Write reg 1 */
+ u32 cpcewabr1; /* External write base reg 1 */
+ u32 res4[54];
+ u32 cpcsrcr1; /* SRAM control reg 1 */
+ u32 cpcsrcr0; /* SRAM control reg 0 */
+ u32 res5[62];
+ struct {
+ u32 id; /* partition ID */
+ u32 res;
+ u32 alloc; /* partition allocation */
+ u32 way; /* partition way */
+ } partition_regs[16];
+ u32 res6[704];
+ u32 cpcerrinjhi; /* Error injection high */
+ u32 cpcerrinjlo; /* Error injection lo */
+ u32 cpcerrinjctl; /* Error injection control */
+ u32 res7[5];
+ u32 cpccaptdatahi; /* capture data high */
+ u32 cpccaptdatalo; /* capture data low */
+ u32 cpcaptecc; /* capture ECC */
+ u32 res8[5];
+ u32 cpcerrdet; /* error detect */
+ u32 cpcerrdis; /* error disable */
+ u32 cpcerrinten; /* errir interrupt enable */
+ u32 cpcerrattr; /* error attribute */
+ u32 cpcerreaddr; /* error extended address */
+ u32 cpcerraddr; /* error address */
+ u32 cpcerrctl; /* error control */
+ u32 res9[105]; /* pad out to 4k */
+} cpc_corenet_t;
+
+#define CPC_CSR0_CE 0x80000000 /* Cache Enable */
+#define CPC_CSR0_PE 0x40000000 /* Enable ECC */
+#define CPC_CSR0_FI 0x00200000 /* Cache Flash Invalidate */
+#define CPC_CSR0_WT 0x00080000 /* Write-through mode */
+#define CPC_CSR0_FL 0x00000800 /* Hardware cache flush */
+#define CPC_CSR0_LFC 0x00000400 /* Cache Lock Flash Clear */
+#define CPC_CFG0_SZ_MASK 0x00003fff
+#define CPC_CFG0_SZ_K(x) ((x & CPC_CFG0_SZ_MASK) << 6)
+#define CPC_CFG0_NUM_WAYS(x) (((x >> 14) & 0x1f) + 1)
+#define CPC_CFG0_LINE_SZ(x) ((((x >> 23) & 0x3) + 1) * 32)
+#define CPC_SRCR1_SRBARU_MASK 0x0000ffff
+#define CPC_SRCR1_SRBARU(x) (((unsigned long long)x >> 32) \
+ & CPC_SRCR1_SRBARU_MASK)
+#define CPC_SRCR0_SRBARL_MASK 0xffff8000
+#define CPC_SRCR0_SRBARL(x) (x & CPC_SRCR0_SRBARL_MASK)
+#define CPC_SRCR0_INTLVEN 0x00000100
+#define CPC_SRCR0_SRAMSZ_1_WAY 0x00000000
+#define CPC_SRCR0_SRAMSZ_2_WAY 0x00000002
+#define CPC_SRCR0_SRAMSZ_4_WAY 0x00000004
+#define CPC_SRCR0_SRAMSZ_8_WAY 0x00000006
+#define CPC_SRCR0_SRAMSZ_16_WAY 0x00000008
+#define CPC_SRCR0_SRAMSZ_32_WAY 0x0000000a
+#define CPC_SRCR0_SRAMEN 0x00000001
+#define CPC_ERRDIS_TMHITDIS 0x00000080 /* multi-way hit disable */
+#endif /* CONFIG_SYS_FSL_CPC */
+
/* Global Utilities Block */
#ifdef CONFIG_FSL_CORENET
typedef struct ccsr_gur {
} ccsr_gur_t;
#endif
+typedef struct serdes_corenet {
+ struct {
+ u32 rstctl; /* Reset Control Register */
+#define SRDS_RSTCTL_RST 0x80000000
+#define SRDS_RSTCTL_RSTDONE 0x40000000
+#define SRDS_RSTCTL_RSTERR 0x20000000
+ u32 pllcr0; /* PLL Control Register 0 */
+ u32 pllcr1; /* PLL Control Register 1 */
+#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
+ u32 res[5];
+ } bank[3];
+ u32 res1[12];
+ u32 srdstcalcr; /* TX Calibration Control */
+ u32 res2[3];
+ u32 srdsrcalcr; /* RX Calibration Control */
+ u32 res3[3];
+ u32 srdsgr0; /* General Register 0 */
+ u32 res4[11];
+ u32 srdspccr0; /* Protocol Converter Config 0 */
+ u32 srdspccr1; /* Protocol Converter Config 1 */
+ u32 srdspccr2; /* Protocol Converter Config 2 */
+#define SRDS_PCCR2_RST_XGMII1 0x00800000
+#define SRDS_PCCR2_RST_XGMII2 0x00400000
+ u32 res5[197];
+ struct {
+ u32 gcr0; /* General Control Register 0 */
+#define SRDS_GCR0_RRST 0x00400000
+#define SRDS_GCR0_1STLANE 0x00010000
+ u32 gcr1; /* General Control Register 1 */
+#define SRDS_GCR1_REIDL_CTL_MASK 0x001f0000
+#define SRDS_GCR1_REIDL_CTL_PCIE 0x00100000
+#define SRDS_GCR1_REIDL_CTL_SRIO 0x00000000
+#define SRDS_GCR1_REIDL_CTL_SGMII 0x00040000
+#define SRDS_GCR1_OPAD_CTL 0x04000000
+ u32 res1[4];
+ u32 tecr0; /* TX Equalization Control Reg 0 */
+#define SRDS_TECR0_TEQ_TYPE_MASK 0x30000000
+#define SRDS_TECR0_TEQ_TYPE_2LVL 0x10000000
+ u32 res3;
+ u32 ttlcr0; /* Transition Tracking Loop Ctrl 0 */
+ u32 res4[7];
+ } lane[24];
+ u32 res6[384];
+} serdes_corenet_t;
+
+enum {
+ FSL_SRDS_B1_LANE_A = 0,
+ FSL_SRDS_B1_LANE_B = 1,
+ FSL_SRDS_B1_LANE_C = 2,
+ FSL_SRDS_B1_LANE_D = 3,
+ FSL_SRDS_B1_LANE_E = 4,
+ FSL_SRDS_B1_LANE_F = 5,
+ FSL_SRDS_B1_LANE_G = 6,
+ FSL_SRDS_B1_LANE_H = 7,
+ FSL_SRDS_B1_LANE_I = 8,
+ FSL_SRDS_B1_LANE_J = 9,
+ FSL_SRDS_B2_LANE_A = 16,
+ FSL_SRDS_B2_LANE_B = 17,
+ FSL_SRDS_B2_LANE_C = 18,
+ FSL_SRDS_B2_LANE_D = 19,
+ FSL_SRDS_B3_LANE_A = 20,
+ FSL_SRDS_B3_LANE_B = 21,
+ FSL_SRDS_B3_LANE_C = 22,
+ FSL_SRDS_B3_LANE_D = 23,
+};
+
#ifdef CONFIG_FSL_CORENET
#define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000
#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000
#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x9000
#define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000
#define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000
+#define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000
+#define CONFIG_SYS_FSL_CPC_OFFSET 0x10000
#define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x100000
#define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x110000
#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x114000
#define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x124000
#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000
+#define CONFIG_SYS_MPC85xx_USB_OFFSET 0x210000
#define CONFIG_SYS_FSL_CORENET_QMAN_OFFSET 0x318000
#define CONFIG_SYS_FSL_CORENET_BMAN_OFFSET 0x31a000
#else
#define CONFIG_SYS_MPC85xx_L2_OFFSET 0x20000
#define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x21000
#define CONFIG_SYS_MPC85xx_USB_OFFSET 0x22000
+#ifdef CONFIG_TSECV2
+#define CONFIG_SYS_TSEC1_OFFSET 0xB0000
+#else
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#endif
+#define CONFIG_SYS_MDIO1_OFFSET 0x24000
#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000
#define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100
#define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000
#define CONFIG_SYS_MPC85xx_PIC_OFFSET 0x40000
#define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000
+#define CONFIG_SYS_FSL_CPC_ADDR \
+ (CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET)
#define CONFIG_SYS_FSL_CORENET_QMAN_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_QMAN_OFFSET)
#define CONFIG_SYS_FSL_CORENET_BMAN_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
#define CONFIG_SYS_MPC85xx_SERDES2_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_SERDES_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET)
#define CONFIG_SYS_MPC85xx_USB_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
+#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+
#endif /*__IMMAP_85xx__*/
/*
* MPC86xx Internal Memory Map
*
- * Copyright(c) 2004 Freescale Semiconductor
+ * Copyright 2004 Freescale Semiconductor
* Jeff Brown (Jeffrey@freescale.com)
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*
#define CONFIG_SYS_MPC86xx_DMA_OFFSET (0x21000)
#define CONFIG_SYS_MPC86xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET)
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#define CONFIG_SYS_MDIO1_OFFSET 0x24000
+
+#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+
#endif /*__IMMAP_86xx__*/
extern void invalidate_tlb(u8 tlb);
extern void init_tlbs(void);
extern int find_tlb_idx(void *addr, u8 tlbsel);
+extern void init_used_tlb_cams(void);
+extern int find_free_tlbcam(void);
extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg);
#endif
#endif
+#define IS_SVR_REV(svr, maj, min) \
+ ((SVR_MAJ(svr) == maj) && (SVR_MIN(svr) == min))
+
/*
* SVR_SOC_VER() Version Values
*/
*/
#define CONFIG_SYS_PCI_PHYS 0x80000000 /* 1G PCI TLB */
-#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS
#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
#ifdef CONFIG_PCI2
-#define CONFIG_SYS_PCI2_MEM_BASE 0xC0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_BUS 0xC0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BUS
#define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCI2_IO_BASE 0x00000000
+#define CONFIG_SYS_PCI2_IO_BUS 0x00000000
#define CONFIG_SYS_PCI2_IO_PHYS 0xe2800000
#define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */
#endif
#ifdef CONFIG_PCIE1
-#define CONFIG_SYS_PCIE1_MEM_BASE 0xa0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE1_IO_PHYS 0xe3000000
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00100000 /* 1M */
#endif
#ifndef __CONFIG_H
#define __CONFIG_H
+#ifdef CONFIG_MK_NAND
+#define CONFIG_NAND_U_BOOT 1
+#define CONFIG_RAMBOOT_TEXT_BASE 0x00100000
+#endif
+
/*
* High Level Configuration Options
*/
HRCWL_SVCOD_DIV_2 |\
HRCWL_CSB_TO_CLKIN_2X1 |\
HRCWL_CORE_TO_CSB_3X1)
-#define CONFIG_SYS_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH_BASE (\
HRCWH_PCI_HOST |\
HRCWH_PCI1_ARBITER_ENABLE |\
HRCWH_CORE_ENABLE |\
- HRCWH_FROM_0X00000100 |\
HRCWH_BOOTSEQ_DISABLE |\
HRCWH_SW_WATCHDOG_DISABLE |\
- HRCWH_ROM_LOC_LOCAL_16BIT |\
- HRCWH_RL_EXT_LEGACY |\
HRCWH_TSEC1M_IN_RGMII |\
HRCWH_TSEC2M_IN_RGMII |\
HRCWH_BIG_ENDIAN |\
HRCWH_LALE_NORMAL)
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
+ HRCWH_FROM_0XFFF00100 |\
+ HRCWH_ROM_LOC_NAND_SP_8BIT |\
+ HRCWH_RL_EXT_NAND)
+#else
+#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY)
+#endif
+
/*
* System IO Config
*/
*/
#define CONFIG_SYS_IMMR 0xE0000000
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR
+#endif
+
/*
* Arbiter Setup
*/
*/
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* Window base at flash base */
#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8MB window size */
-#define CONFIG_SYS_BR0_PRELIM ( CONFIG_SYS_FLASH_BASE /* Flash Base address */ \
+#define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \
| (2 << BR_PS_SHIFT) /* 16 bit port size */ \
| BR_V ) /* valid */
-#define CONFIG_SYS_OR0_PRELIM ( (~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
+#define CONFIG_SYS_NOR_OR_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
| OR_UPM_XAM \
| OR_GPCM_CSNT \
| OR_GPCM_ACS_DIV2 \
/*
* NAND Flash on the Local Bus
*/
-#define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */
+
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_NAND_BASE 0xFFF00000
+#else
+#define CONFIG_SYS_NAND_BASE 0xE0600000
+#endif
+
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_MTD_NAND_VERIFY_WRITE 1
#define CONFIG_CMD_NAND 1
#define CONFIG_NAND_FSL_ELBC 1
+#define CONFIG_SYS_NAND_BLOCK_SIZE 16384
+
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 16384
+#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
-#define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_NAND_BASE \
+#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8 bit */ \
| BR_MS_FCM /* MSEL = FCM */ \
| BR_V ) /* valid */
-#define CONFIG_SYS_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \
+#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFF8000 /* length 32K */ \
| OR_FCM_CSCT \
| OR_FCM_CST \
| OR_FCM_CHT \
| OR_FCM_EHTR )
/* 0xFFFF8396 */
+#ifdef CONFIG_NAND_U_BOOT
+#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
+#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
+#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM
+#else
+#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
+#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
+#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
+#endif
+
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
+#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
+#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
+
+#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE && \
+ !defined(CONFIG_NAND_SPL)
+#define CONFIG_SYS_RAMBOOT
+#else
+#undef CONFIG_SYS_RAMBOOT
+#endif
+
/*
* Serial Port
*/
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*
* Environment
*/
-#ifndef CONFIG_SYS_RAMBOOT
+#if defined(CONFIG_NAND_U_BOOT)
+ #define CONFIG_ENV_IS_IN_NAND 1
+ #define CONFIG_ENV_OFFSET (512 * 1024)
+ #define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+ #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+ #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+ #define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4)
+ #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
+ CONFIG_ENV_RANGE)
+#elif !defined(CONFIG_SYS_RAMBOOT)
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
#define CONFIG_CMD_DATE
#define CONFIG_CMD_PCI
-#if defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
#undef CONFIG_CMD_SAVEENV
#undef CONFIG_CMD_LOADS
#endif
/* FLASH: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_32M | \
+ BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
#define PLPDIR1_I2C_BIT_MASK 0x0000000F
#define PLPDIR1_I2C2_VAL 0x0000000F
#define PLPDIR1_ESDHC_VAL 0x00000006
+#define PLPPAR1_UART0_BIT_MASK 0x00000fc0
+#define PLPPAR1_ESDHC_4BITS_VAL 0x00000a80
+#define PLPDIR1_UART0_BIT_MASK 0x00000fc0
+#define PLPDIR1_ESDHC_4BITS_VAL 0x00000a80
/*
* General PCI
#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
/* DDR Setup */
-#define CONFIG_SYS_DDR_TLB_START 9
#define CONFIG_VERY_BIG_RAM
#define CONFIG_FSL_DDR2
#undef CONFIG_FSL_DDR_INTERACTIVE
#define CONFIG_SYS_DDR_ERR_DIS 0x00000000
#define CONFIG_SYS_DDR_SBE 0x00FF0000
-#define CONFIG_SYS_DDR_TLB_START 9
-
/*
* Memory map
*
#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
/* DDR Setup */
-#define CONFIG_SYS_DDR_TLB_START 9
#define CONFIG_VERY_BIG_RAM
#define CONFIG_FSL_DDR3 1
#undef CONFIG_FSL_DDR_INTERACTIVE
#define CONFIG_SYS_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#endif
+/*
+ * USB configuration
+ */
+#define CONFIG_USB_DA8XX /* Platform hookup to MUSB controller */
+#define CONFIG_MUSB_HCD
/*
* U-Boot general configuration
#endif
#ifdef CONFIG_USB_DA8XX
-#define CONFIG_CMD_USB /* include support for usb */
-#define CONFIG_CMD_STORAGE /* include support for usb */
-#define CONFIG_CMD_FAT /* include support for FAT/storage*/
-#define CONFIG_DOS_PARTITION /* include support for FAT/storage*/
-#endif
+#ifdef CONFIG_MUSB_HCD /* include support for usb host */
+#define CONFIG_CMD_USB /* include support for usb cmd */
+
+#define CONFIG_USB_STORAGE /* MSC class support */
+#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */
+#define CONFIG_CMD_FAT /* inclue support for FAT/storage */
+#define CONFIG_DOS_PARTITION /* inclue support for FAT/storage */
+
+#ifdef CONFIG_USB_KEYBOARD /* HID class support */
+#define CONFIG_SYS_USB_EVENT_POLL
+#define CONFIG_PREBOOT "usb start"
+#endif /* CONFIG_USB_KEYBOARD */
+
+#endif /* CONFIG_MUSB_HCD */
+
+#ifdef CONFIG_MUSB_UDC
+/* USB device configuration */
+#define CONFIG_USB_DEVICE 1
+#define CONFIG_USB_TTY 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID 0x0451
+#define CONFIG_USBD_PRODUCTID 0x5678
+#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME "DA830EVM"
+#endif /* CONFIG_MUSB_UDC */
+
+#endif /* CONFIG_USB_DA8XX */
#endif /* __CONFIG_H */
*/
#define CONFIG_SYS_IMMR 0xE0000000
+/*
+ * Bus Arbitration Configuration Register (ACR)
+ */
+#define CONFIG_SYS_ACR_PIPE_DEP 3 /* pipeline depth 4 transactions */
+#define CONFIG_SYS_ACR_RPTCNT 3 /* 4 consecutive transactions */
+#define CONFIG_SYS_ACR_APARK 0 /* park bus to master (below) */
+#define CONFIG_SYS_ACR_PARKM 3 /* parking master = QuiccEngine */
+
/*
* DDR Setup
*/
/* USB */
#ifdef CONFIG_440EPX
+
+#undef CONFIG_USB_EHCI /* OHCI by default */
+
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_PPC4XX
+#define CONFIG_SYS_PPC4XX_USB_ADDR 0xe0000300
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#ifdef CONFIG_4xx_DCACHE
+#define CONFIG_EHCI_DCACHE
+#endif
+#else /* CONFIG_USB_EHCI */
#define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_STORAGE
#define CONFIG_SYS_OHCI_BE_CONTROLLER
#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
#define CONFIG_SYS_USB_OHCI_REGS_BASE CONFIG_SYS_USB_HOST
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ppc440"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
+#endif
+#define CONFIG_USB_STORAGE
/* Comment this out to enable USB 1.1 device */
#define USB_2_0_DEVICE
#ifndef __CONFIG_H
#define __CONFIG_H
+/*
+ * Top level Makefile configuration choices
+ */
+#ifdef CONFIG_MK_caddy2
+#define VME_CADDY2
+#endif
+
/*
* High Level Configuration Options
*/
#define CONFIG_MPC8349 1 /* MPC8349 specific */
#define CONFIG_VME8349 1 /* ESD VME8349 board specific */
+#define CONFIG_MISC_INIT_R
+
#define CONFIG_PCI
/* Don't enable PCI2 on vme834x - it doesn't exist physically. */
#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */
*/
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */
-#undef CONFIG_SPD_EEPROM /* dont use SPD EEPROM for DDR setup*/
+#define CONFIG_SPD_EEPROM
+#define SPD_EEPROM_ADDRESS 0x54
+#define CONFIG_SYS_READ_SPD vme8349_read_spd
#define CONFIG_SYS_83XX_DDR_USES_CS0 /* esd; Fsl board uses CS2/CS3 */
/*
#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
#define CONFIG_DDR_2T_TIMING
-
-/*
- * Manually set up DDR parameters
- */
-#define CONFIG_SYS_DDR_SIZE 512 /* MB */
-
-#if (CONFIG_SYS_DDR_SIZE == 512)
-#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | \
- CSCONFIG_COL_BIT_10 | \
- CSCONFIG_BANK_BIT_3)
-#endif
-
-/*
- * Manually set up DDR parameters
- */
-#define CONFIG_SYS_DDR_TIMING_0 0x00220802
-#define CONFIG_SYS_DDR_TIMING_1 0x39377322
-#define CONFIG_SYS_DDR_TIMING_2 0x2f9848ca /* P9-45, tuning? */
-#define CONFIG_SYS_DDR_TIMING_3 0x00000000
-#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuf,no DYN_PWR */
-#define CONFIG_SYS_DDR_MODE 0x07940242
-#define CONFIG_SYS_DDR_MODE2 0x00000000
-/* autocharge,no open page */
-#define CONFIG_SYS_DDR_INTERVAL 0x04060100
-#define CONFIG_SYS_DDR_SDRAM_CFG 0x63000000
-#define CONFIG_SYS_DDR_SDRAM_CFG2 0x04061000
+#define CONFIG_SYS_DDRCDR 0x80080001
/*
* FLASH on the Local Bus
*/
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
-#define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */
-#define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */
-/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
+#ifdef VME_CADDY2
+#define CONFIG_SYS_FLASH_BASE 0xffc00000 /* start of FLASH */
+#define CONFIG_SYS_FLASH_SIZE 4 /* flash size in MB */
+#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
+ (2 << BR_PS_SHIFT) | /* 32bit */ \
+ BR_V) /* valid */
+#define CONFIG_SYS_OR0_PRELIM 0xffc06ff7 /* 4 MB flash size */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000015 /* 4 MB window size */
+#else
+#define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */
+#define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
(2 << BR_PS_SHIFT) | /* 32bit */ \
BR_V) /* valid */
-#define CONFIG_SYS_OR0_PRELIM 0xF8006FF7 /* 128 MB flash size */
+#define CONFIG_SYS_OR0_PRELIM 0xf8006ff7 /* 128 MB flash size */
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001A /* 128 MB window size */
+#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001a /* 128 MB window size */
+#endif
+/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
#define CONFIG_SYS_BR1_PRELIM (0xf0000000 | 0x00001801)
-#define CONFIG_SYS_OR1_PRELIM (0xffff8000 | 0x00000200)
+#define CONFIG_SYS_OR1_PRELIM (0xfffc0008 | 0x00000200)
#define CONFIG_SYS_LBLAWBAR1_PRELIM 0xf0000000
-#define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x0000000e)
+#define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x00000011)
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#else
-#undef CONFIG_SYS_RAMBOOT
+#undef CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_INIT_RAM_LOCK 1
/*
* Local Bus LCRR and LBCR regs
- * LCRR: DLL bypass, Clock divider is 4
+ * LCRR: no DLL bypass, Clock divider is 4
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
-#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
#undef PCI_ONE_PCI1
#endif
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-
+#ifndef VME_CADDY2
#define CONFIG_NET_MULTI
+#endif
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#define PCI_IDSEL_NUMBER 0xFIXME
#endif
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+
#endif /* CONFIG_PCI */
/*
* TSEC configuration
*/
+#ifdef VME_CADDY2
+#define CONFIG_E1000
+#else
#define CONFIG_TSEC_ENET /* TSEC ethernet support */
+#endif
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI
#endif
-#define CONFIG_GMII /* MII PHY management */
+#define CONFIG_GMII /* MII PHY management */
#define CONFIG_TSEC1
#define CONFIG_TSEC1_NAME "TSEC0"
#define CONFIG_TSEC2
#endif /* CONFIG_TSEC_ENET */
+#if defined(CONFIG_E1000)
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI
+#endif
+#endif
+
/*
* Environment
*/
#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
#undef CONFIG_BOOTARGS /* boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
+#define CONFIG_BAUDRATE 9600
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
#define CONFIG_BOOTCOMMAND "run flash_self"
+#ifndef __ASSEMBLY__
+int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen,
+ unsigned char *buffer, int len);
+#endif
+
#endif /* __CONFIG_H */
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
- * Copyright 2004, 2007 Freescale Semiconductor, Inc.
+ * Copyright 2004, 2007, 2009 Freescale Semiconductor, Inc.
* (C) Copyright 2003, Motorola, Inc.
* maintained by Xianghua Xiao (x.xiao@motorola.com)
* author Andy Fleming
#include <net.h>
#include <config.h>
-#ifndef CONFIG_SYS_TSEC1_OFFSET
- #define CONFIG_SYS_TSEC1_OFFSET (0x24000)
-#endif
-
-#define TSEC_SIZE 0x01000
-
-/* FIXME: Should these be pushed back to 83xx and 85xx config files? */
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) \
- || defined(CONFIG_MPC83xx)
- #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
-#endif
+#define TSEC_SIZE 0x01000
+#define TSEC_MDIO_OFFSET 0x01000
#define STD_TSEC_INFO(num) \
{ \
.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \
- .miiregs = (tsec_t *)TSEC_BASE_ADDR, \
+ .miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR), \
+ .miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+ + (num - 1) * TSEC_MDIO_OFFSET), \
.devname = CONFIG_TSEC##num##_NAME, \
.phyaddr = TSEC##num##_PHY_ADDR, \
.flags = TSEC##num##_FLAGS \
#define SET_STD_TSEC_INFO(x, num) \
{ \
x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \
- x.miiregs = (tsec_t *)TSEC_BASE_ADDR; \
+ x.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR); \
+ x.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+ + (num - 1) * TSEC_MDIO_OFFSET); \
x.devname = CONFIG_TSEC##num##_NAME; \
x.phyaddr = TSEC##num##_PHY_ADDR; \
x.flags = TSEC##num##_FLAGS;\
uint res2[24];
} tsec_hash_t;
+typedef struct tsec_mdio {
+ uint res1[4];
+ uint ieventm;
+ uint imaskm;
+ uint res2;
+ uint emapm;
+ uint res3[320];
+ uint miimcfg; /* MII Management: Configuration */
+ uint miimcom; /* MII Management: Command */
+ uint miimadd; /* MII Management: Address */
+ uint miimcon; /* MII Management: Control */
+ uint miimstat; /* MII Management: Status */
+ uint miimind; /* MII Management: Indicators */
+ uint res4[690];
+} tsec_mdio_t;
+
typedef struct tsec
{
/* General Control and Status Registers (0x2_n000) */
uint res51c;
- uint miimcfg; /* MII Management: Configuration */
- uint miimcom; /* MII Management: Command */
- uint miimadd; /* MII Management: Address */
- uint miimcon; /* MII Management: Control */
- uint miimstat; /* MII Management: Status */
- uint miimind; /* MII Management: Indicators */
+ uint resmdio[6];
uint res538;
struct tsec_private {
volatile tsec_t *regs;
- volatile tsec_t *phyregs;
+ volatile tsec_mdio_t *phyregs;
+ volatile tsec_mdio_t *phyregs_sgmii;
struct phy_info *phyinfo;
uint phyaddr;
u32 flags;
struct tsec_info_struct {
tsec_t *regs;
- tsec_t *miiregs;
+ tsec_mdio_t *miiregs;
+ tsec_mdio_t *miiregs_sgmii;
char *devname;
unsigned int phyaddr;
u32 flags;
defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_OHCI_NEW) || \
defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD) || \
defined(CONFIG_USB_R8A66597_HCD) || defined(CONFIG_USB_DAVINCI) || \
- defined(CONFIG_USB_OMAP3)
+ defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \
+ defined(CONFIG_USB_BLACKFIN)
int usb_lowlevel_init(void);
int usb_lowlevel_stop(void);
projects / u-boot / commitdiff