CONFIG_CMD_NFS NFS support
CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network
host
- CONFIG_CMD_REGINFO * Register dump
CONFIG_CMD_RUN run command in env variable
CONFIG_CMD_SANDBOX * sb command to access sandbox features
CONFIG_CMD_SAVES * save S record dump
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
imply ENV_IS_IN_FLASH
+ imply CMD_REGINFO
config 8xx
bool "MPC8xx"
+ imply CMD_REGINFO
endchoice
select FSL_IFC
imply CMD_EEPROM
imply CMD_NAND
+ imply CMD_REGINFO
config ARCH_B4860
bool
select FSL_IFC
imply CMD_EEPROM
imply CMD_NAND
+ imply CMD_REGINFO
config ARCH_BSC9131
bool
select FSL_IFC
imply CMD_EEPROM
imply CMD_NAND
+ imply CMD_REGINFO
config ARCH_BSC9132
bool
imply CMD_MTDPARTS
imply CMD_NAND
imply CMD_PCI
+ imply CMD_REGINFO
config ARCH_C29X
bool
select FSL_IFC
imply CMD_NAND
imply CMD_PCI
+ imply CMD_REGINFO
config ARCH_MPC8536
bool
select FSL_ELBC
imply CMD_NAND
imply CMD_SATA
+ imply CMD_REGINFO
config ARCH_MPC8540
bool
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
imply ENV_IS_IN_FLASH
+ imply CMD_REGINFO
config ARCH_MPC8555
bool
imply CMD_NAND
imply CMD_SATA
imply CMD_PCI
+ imply CMD_REGINFO
config ARCH_P1011
bool
imply CMD_NAND
imply CMD_SATA
imply CMD_PCI
+ imply CMD_REGINFO
config ARCH_P1021
bool
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
select FSL_ELBC
+ imply CMD_REGINFO
imply CMD_NAND
imply CMD_SATA
+ imply CMD_REGINFO
config ARCH_P1022
bool
imply CMD_NAND
imply CMD_SATA
imply CMD_PCI
+ imply CMD_REGINFO
config ARCH_P1025
bool
select SYS_PPC_E500_USE_DEBUG_TLB
select FSL_ELBC
imply CMD_SATA
+ imply CMD_REGINFO
config ARCH_P2020
bool
select FSL_ELBC
imply CMD_EEPROM
imply CMD_NAND
+ imply CMD_REGINFO
config ARCH_P2041
bool
select FSL_ELBC
imply CMD_NAND
imply CMD_SATA
+ imply CMD_REGINFO
config ARCH_P4080
bool
select SYS_FSL_SEC_COMPAT_4
select FSL_ELBC
imply CMD_SATA
+ imply CMD_REGINFO
config ARCH_P5020
bool
select SYS_PPC64
select FSL_ELBC
imply CMD_SATA
+ imply CMD_REGINFO
config ARCH_P5040
bool
select SYS_PPC64
select FSL_ELBC
imply CMD_SATA
+ imply CMD_REGINFO
config ARCH_QEMU_E500
bool
select FSL_IFC
imply CMD_EEPROM
imply CMD_NAND
+ imply CMD_REGINFO
config ARCH_T1024
bool
imply CMD_EEPROM
imply CMD_NAND
imply CMD_MTDPARTS
+ imply CMD_REGINFO
config ARCH_T1040
bool
imply CMD_MTDPARTS
imply CMD_NAND
imply CMD_SATA
+ imply CMD_REGINFO
config ARCH_T1042
bool
imply CMD_MTDPARTS
imply CMD_NAND
imply CMD_SATA
+ imply CMD_REGINFO
config ARCH_T2080
bool
select FSL_IFC
imply CMD_SATA
imply CMD_NAND
+ imply CMD_REGINFO
config ARCH_T2081
bool
select SYS_PPC64
select FSL_IFC
imply CMD_NAND
+ imply CMD_REGINFO
config ARCH_T4160
bool
select FSL_IFC
imply CMD_SATA
imply CMD_NAND
+ imply CMD_REGINFO
config ARCH_T4240
bool
select FSL_IFC
imply CMD_SATA
imply CMD_NAND
+ imply CMD_REGINFO
config BOOKE
bool
help
Print GPL license text
+config CMD_REGINFO
+ bool "reginfo"
+ depends on PPC
+ help
+ Register dump
+
endmenu
menu "Boot commands"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=10
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_MII=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=10
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_MII=y
CONFIG_BOOTDELAY=10
# CONFIG_CONSOLE_MUX is not set
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_PCI=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=10
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_MII=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=10
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_MII=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_DHCP=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_DHCP=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTDELAY=10
# CONFIG_CONSOLE_MUX is not set
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_PCI=y
CONFIG_BOOTDELAY=10
# CONFIG_CONSOLE_MUX is not set
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_PCI=y
CONFIG_TPL_I2C_SUPPORT=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y
CONFIG_BOOTDELAY=-1
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
# CONFIG_CMD_EEPROM is not set
CONFIG_CMD_NAND=y
CONFIG_CMD_I2C=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_GREPENV=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_NAND=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_PCI=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_REGINFO=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_I2C=y
* Alphabetical list of all possible commands.
*/
-#define CONFIG_CMD_REGINFO /* Register dump */
#define CONFIG_CMD_REISER /* Reiserfs support */
#define CONFIG_CMD_SANDBOX /* sb command to access sandbox features */
#define CONFIG_CMD_SAVES /* save S record dump */
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* USB
*/
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* Miscellaneous configurable options
*/
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* Miscellaneous configurable options
*/
#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_LOADS_BAUD_CHANGE
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* Miscellaneous configurable options
*/
#define BOOTFLAG_COLD 0x01
#define BOOTFLAG_WARM 0x02
-/* Misc Settings */
-#define CONFIG_CMD_REGINFO
-
#endif /* __CONFIG_H */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#ifdef CONFIG_MMC
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* USB
*/
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_ETHER_ON_FCC)
-#endif
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#ifdef CONFIG_MMC
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* USB
*/
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_CMD_REGINFO
-
#define CONFIG_ULI526X
#ifdef CONFIG_ULI526X
#endif
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \
#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_LOADS_BAUD_CHANGE
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* USB
*/
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* USB
*/
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* Miscellaneous configurable options
*/
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* Miscellaneous configurable options
*/
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* Miscellaneous configurable options
*/
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* Miscellaneous configurable options
*/
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* Miscellaneous configurable options
*/
* Environment
*/
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* Miscellaneous configurable options
*/
#define CONFIG_DDR_ECC
-#define CONFIG_CMD_REGINFO
-
/* High Level Configuration Options */
#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
#define CONFIG_MP /* support multiple processors */
#endif /* CONFIG_TSEC_ENET */
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-
#if defined(CONFIG_PCI)
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* USB
*/
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#ifndef CONFIG_TRAILBLAZER
-
-#define CONFIG_CMD_REGINFO
-
/*
* Board initialisation callbacks
*/
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* USB
*/
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* USB
*/
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* USB
*/
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* USB
*/
#ifndef __QEMU_PPCE500_H
#define __QEMU_PPCE500_H
-#define CONFIG_CMD_REGINFO
-
#undef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xf01000 /* 15 MB */
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#define CONFIG_CMD_REGINFO
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-/***********************************************************
- * Command definition
- ***********************************************************/
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
* Command line configuration.
*/
#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_REGINFO
#undef CONFIG_WATCHDOG /* watchdog disabled */
#ifndef __T4QDS_H
#define __T4QDS_H
-#define CONFIG_CMD_REGINFO
-
/* High Level Configuration Options */
#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
#define CONFIG_MP /* support multiple processors */
BATL_CACHEINHIBIT)
#define CONFIG_SYS_IBAT7U CONFIG_SYS_DBAT7U
-/*
- * Command configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* Miscellaneous configurable options
*/
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
-/*
- * Command configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* Miscellaneous configurable options
*/
#define TSEC2_PHYIDX 0
#define CONFIG_HAS_ETH1
-/*
- * Command configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* Miscellaneous configurable options
*/
#define CONFIG_USB_EHCI_FSL
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-/*
- * Command configuration.
- */
-#define CONFIG_CMD_REGINFO
-
/*
* Miscellaneous configurable options
*/
CONFIG_CMDLINE_EDITING
CONFIG_CMDLINE_PS_SUPPORT
CONFIG_CMDLINE_TAG
-CONFIG_CMD_REGINFO
CONFIG_CMD_REISER
CONFIG_CMD_SANDBOX
CONFIG_CMD_SAVES