dts: exynos: snow: Add a new node for the NXP video bridge driver

The driver supports driver model. Add a node for snow, which needs it.

Signed-off-by: Simon Glass <sjg@chromium.org>

diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
index 35912526e71e32640f837fc2cb988f9cd758a419..334a5af6cc8697e2171e193d90affd0dae7e9e9f 100644 (file)
--- a/arch/arm/dts/exynos5250-snow.dts
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -206,6 +206,22 @@
                };
        };
 
+       i2c@12CD0000 {
+               ptn3460: lvds-bridge@20 {
+                       compatible = "nxp,ptn3460";
+                       reg = <0x20>;
+                       sleep-gpios = <&gpy2 5 GPIO_ACTIVE_LOW>;
+                       reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+                       hotplug-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+                       edid-emulation = <5>;
+               };
+
+               soundcodec@22 {
+                       reg = <0x22>;
+                       compatible = "maxim,max98095-codec";
+               };
+       };
+
        spi@12d30000 {
                spi-max-frequency = <50000000>;
                firmware_storage_spi: flash@0 {
@@ -238,26 +254,6 @@
                status = "disabled";
        };
 
-       i2c@12CD0000 {
-               soundcodec@22 {
-                       reg = <0x22>;
-                       compatible = "maxim,max98095-codec";
-               };
-
-               ptn3460-bridge@20 {
-                       compatible = "nxp,ptn3460";
-                       reg = <0x20>;
-                       /*
-                        * TODO(sjg@chromium.org): Use GPIOs here
-                        * powerdown-gpio = <&gpy2 5 0>;
-                        * reset-gpio = <&gpx1 5 0>;
-                        * edid-emulation = <5>;
-                        * pinctrl-names = "default";
-                        * pinctrl-0 = <&ptn3460_gpios>;
-                        */
-               };
-       };
-
        i2c@12C60000 {
                max77686@09 {
                        reg = <0x9>;