]> git.sur5r.net Git - u-boot/commitdiff
i2c: mxc: move to new subsystem
authortrem <tremyfr@yahoo.fr>
Sat, 21 Sep 2013 16:13:35 +0000 (18:13 +0200)
committerHeiko Schocher <hs@denx.de>
Thu, 17 Oct 2013 05:20:24 +0000 (07:20 +0200)
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
README
arch/arm/cpu/armv7/mx5/clock.c
arch/arm/cpu/armv7/mx6/clock.c
arch/arm/imx-common/Makefile
drivers/i2c/Makefile
drivers/i2c/mxc_i2c.c

diff --git a/README b/README
index 09662a4a0369b2567f6b8274898b4e8b16af8595..7dc4f239afdf3f8c31abdc889b869d65274a807c 100644 (file)
--- a/README
+++ b/README
@@ -2003,6 +2003,17 @@ CBFS (Coreboot Filesystem) support
                  - CONFIG_SYS_I2C_PPC4XX_CH0 activate hardware channel 0
                  - CONFIG_SYS_I2C_PPC4XX_CH1 activate hardware channel 1
 
+               - drivers/i2c/i2c_mxc.c
+                 - activate this driver with CONFIG_SYS_I2C_MXC
+                 - define speed for bus 1 with CONFIG_SYS_MXC_I2C1_SPEED
+                 - define slave for bus 1 with CONFIG_SYS_MXC_I2C1_SLAVE
+                 - define speed for bus 2 with CONFIG_SYS_MXC_I2C2_SPEED
+                 - define slave for bus 2 with CONFIG_SYS_MXC_I2C2_SLAVE
+                 - define speed for bus 3 with CONFIG_SYS_MXC_I2C3_SPEED
+                 - define slave for bus 3 with CONFIG_SYS_MXC_I2C3_SLAVE
+               If thoses defines are not set, default value is 100000
+               for speed, and 0 for slave.
+
                additional defines:
 
                CONFIG_SYS_NUM_I2C_BUSES
index 6bef2544564a6e2924ee11426432453f623e0baf..fb3b1281999b080ed0582154ef8b36e2eecbc1e8 100644 (file)
@@ -94,7 +94,7 @@ void enable_usboh3_clk(bool enable)
                        MXC_CCM_CCGR2_USBOH3_60M(cg));
 }
 
-#ifdef CONFIG_I2C_MXC
+#ifdef CONFIG_SYS_I2C_MXC
 /* i2c_num can be from 0, to 1 for i.MX51 and 2 for i.MX53 */
 int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
 {
index df11678609b060b75af3ae12b13a8cca94c75b6c..cf3a38e81393dbb5cbbbc193a25c25a4b6a7ee5a 100644 (file)
@@ -48,7 +48,7 @@ void enable_usboh3_clk(unsigned char enable)
 
 }
 
-#ifdef CONFIG_I2C_MXC
+#ifdef CONFIG_SYS_I2C_MXC
 /* i2c_num can be from 0 - 2 */
 int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
 {
index 727a05280631df41fff152c1e798d92c504b4c5d..6c78dd91c368389eaa106aecae5b3af6b9b122f6 100644 (file)
@@ -16,7 +16,7 @@ COBJS-y       = iomux-v3.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx5 mx6))
 COBJS-y        += timer.o cpu.o speed.o
-COBJS-$(CONFIG_I2C_MXC) += i2c-mxv7.o
+COBJS-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx6 mxs))
 COBJS-y        += misc.o
index df3092eaf055f69bc195ab9f93b974c4071a25c6..2395dedfc9a3a8d17125ac9669c40ea300c9c72b 100644 (file)
@@ -14,7 +14,6 @@ COBJS-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
 COBJS-$(CONFIG_DW_I2C) += designware_i2c.o
 COBJS-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
 COBJS-$(CONFIG_I2C_MV) += mv_i2c.o
-COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
 COBJS-$(CONFIG_I2C_MXS) += mxs_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
@@ -28,6 +27,7 @@ COBJS-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o
 COBJS-$(CONFIG_SYS_I2C) += i2c_core.o
 COBJS-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
 COBJS-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o
+COBJS-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
 COBJS-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
 COBJS-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
 COBJS-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
index 06ba4e39f1f5ef40f3589e87f75dae3e98fc5481..595019b3b8874601437e5c38d6b9b9793d1d0a92 100644 (file)
@@ -102,6 +102,28 @@ static u16 i2c_clk_div[50][2] = {
 };
 #endif
 
+
+#ifndef CONFIG_SYS_MXC_I2C1_SPEED
+#define CONFIG_SYS_MXC_I2C1_SPEED 100000
+#endif
+#ifndef CONFIG_SYS_MXC_I2C2_SPEED
+#define CONFIG_SYS_MXC_I2C2_SPEED 100000
+#endif
+#ifndef CONFIG_SYS_MXC_I2C3_SPEED
+#define CONFIG_SYS_MXC_I2C3_SPEED 100000
+#endif
+
+#ifndef CONFIG_SYS_MXC_I2C1_SLAVE
+#define CONFIG_SYS_MXC_I2C1_SLAVE 0
+#endif
+#ifndef CONFIG_SYS_MXC_I2C2_SLAVE
+#define CONFIG_SYS_MXC_I2C2_SLAVE 0
+#endif
+#ifndef CONFIG_SYS_MXC_I2C3_SLAVE
+#define CONFIG_SYS_MXC_I2C3_SLAVE 0
+#endif
+
+
 /*
  * Calculate and set proper clock divider
  */
@@ -153,21 +175,6 @@ static int bus_i2c_set_bus_speed(void *base, int speed)
        return 0;
 }
 
-/*
- * Get I2C Speed
- */
-static unsigned int bus_i2c_get_bus_speed(void *base)
-{
-       struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base;
-       u8 clk_idx = readb(&i2c_regs->ifdr);
-       u8 clk_div;
-
-       for (clk_div = 0; i2c_clk_div[clk_div][1] != clk_idx; clk_div++)
-               ;
-
-       return mxc_get_clock(MXC_I2C_CLK) / i2c_clk_div[clk_div][0];
-}
-
 #define ST_BUS_IDLE (0 | (I2SR_IBB << 8))
 #define ST_BUS_BUSY (I2SR_IBB | (I2SR_IBB << 8))
 #define ST_IIF (I2SR_IIF | (I2SR_IIF << 8))
@@ -410,20 +417,30 @@ struct sram_data {
  */
 static struct sram_data __attribute__((section(".data"))) srdata;
 
-void *get_base(void)
-{
-#ifdef CONFIG_SYS_I2C_BASE
-#ifdef CONFIG_I2C_MULTI_BUS
-       void *ret = srdata.i2c_data[srdata.curr_i2c_bus].base;
-       if (ret)
-               return ret;
-#endif
-       return (void *)CONFIG_SYS_I2C_BASE;
-#elif defined(CONFIG_I2C_MULTI_BUS)
-       return srdata.i2c_data[srdata.curr_i2c_bus].base;
+static void * const i2c_bases[] = {
+#if defined(CONFIG_MX25)
+       (void *)IMX_I2C_BASE,
+       (void *)IMX_I2C2_BASE,
+       (void *)IMX_I2C3_BASE
+#elif defined(CONFIG_MX27)
+       (void *)IMX_I2C1_BASE,
+       (void *)IMX_I2C2_BASE
+#elif defined(CONFIG_MX31) || defined(CONFIG_MX35) || \
+       defined(CONFIG_MX51) || defined(CONFIG_MX53) || \
+       defined(CONFIG_MX6)
+       (void *)I2C1_BASE_ADDR,
+       (void *)I2C2_BASE_ADDR,
+       (void *)I2C3_BASE_ADDR
+#elif defined(CONFIG_VF610)
+       (void *)I2C0_BASE_ADDR
 #else
-       return srdata.i2c_data[0].base;
+#error "architecture not supported"
 #endif
+};
+
+void *i2c_get_base(struct i2c_adapter *adap)
+{
+       return i2c_bases[adap->hwadapnr];
 }
 
 static struct i2c_parms *i2c_get_parms(void *base)
@@ -448,39 +465,26 @@ static int i2c_idle_bus(void *base)
        return 0;
 }
 
-#ifdef CONFIG_I2C_MULTI_BUS
-unsigned int i2c_get_bus_num(void)
-{
-       return srdata.curr_i2c_bus;
-}
-
-int i2c_set_bus_num(unsigned bus_idx)
-{
-       if (bus_idx >= ARRAY_SIZE(srdata.i2c_data))
-               return -1;
-       if (!srdata.i2c_data[bus_idx].base)
-               return -1;
-       srdata.curr_i2c_bus = bus_idx;
-       return 0;
-}
-#endif
-
-int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
+static int mxc_i2c_read(struct i2c_adapter *adap, uint8_t chip,
+                               uint addr, int alen, uint8_t *buffer,
+                               int len)
 {
-       return bus_i2c_read(get_base(), chip, addr, alen, buf, len);
+       return bus_i2c_read(i2c_get_base(adap), chip, addr, alen, buffer, len);
 }
 
-int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
+static int mxc_i2c_write(struct i2c_adapter *adap, uint8_t chip,
+                               uint addr, int alen, uint8_t *buffer,
+                               int len)
 {
-       return bus_i2c_write(get_base(), chip, addr, alen, buf, len);
+       return bus_i2c_write(i2c_get_base(adap), chip, addr, alen, buffer, len);
 }
 
 /*
  * Test if a chip at a given address responds (probe the chip)
  */
-int i2c_probe(uchar chip)
+static int mxc_i2c_probe(struct i2c_adapter *adap, uint8_t chip)
 {
-       return bus_i2c_write(get_base(), chip, 0, 0, NULL, 0);
+       return bus_i2c_write(i2c_get_base(adap), chip, 0, 0, NULL, 0);
 }
 
 void bus_i2c_init(void *base, int speed, int unused,
@@ -510,23 +514,38 @@ void bus_i2c_init(void *base, int speed, int unused,
 /*
  * Init I2C Bus
  */
-void i2c_init(int speed, int unused)
+static void mxc_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
 {
-       bus_i2c_init(get_base(), speed, unused, NULL, NULL);
+       bus_i2c_init(i2c_get_base(adap), speed, slaveaddr, NULL, NULL);
 }
 
 /*
  * Set I2C Speed
  */
-int i2c_set_bus_speed(unsigned int speed)
+static uint mxc_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed)
 {
-       return bus_i2c_set_bus_speed(get_base(), speed);
+       return bus_i2c_set_bus_speed(i2c_get_base(adap), speed);
 }
 
 /*
- * Get I2C Speed
+ * Register mxc i2c adapters
  */
-unsigned int i2c_get_bus_speed(void)
-{
-       return bus_i2c_get_bus_speed(get_base());
-}
+U_BOOT_I2C_ADAP_COMPLETE(mxc0, mxc_i2c_init, mxc_i2c_probe,
+                        mxc_i2c_read, mxc_i2c_write,
+                        mxc_i2c_set_bus_speed,
+                        CONFIG_SYS_MXC_I2C1_SPEED,
+                        CONFIG_SYS_MXC_I2C1_SLAVE, 0)
+U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init, mxc_i2c_probe,
+                        mxc_i2c_read, mxc_i2c_write,
+                        mxc_i2c_set_bus_speed,
+                        CONFIG_SYS_MXC_I2C2_SPEED,
+                        CONFIG_SYS_MXC_I2C2_SLAVE, 1)
+#if defined(CONFIG_MX31) || defined(CONFIG_MX35) ||\
+       defined(CONFIG_MX51) || defined(CONFIG_MX53) ||\
+       defined(CONFIG_MX6)
+U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe,
+                        mxc_i2c_read, mxc_i2c_write,
+                        mxc_i2c_set_bus_speed,
+                        CONFIG_SYS_MXC_I2C3_SPEED,
+                        CONFIG_SYS_MXC_I2C3_SLAVE, 2)
+#endif