/*
+ * Copyright (C) 2009 Freescale Semiconductor, Inc.
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright (C) 2009-2012 Genesi USA, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
#include <common.h>
#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx5x_pins.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx51.h>
#include <asm/gpio.h>
#include <asm/errno.h>
#include <asm/arch/sys_proto.h>
#endif
/*
- * Shared variables / local defines
+ * Board revisions
+ *
+ * Note that we get these revisions here for convenience, but we only set
+ * up for the production model Smarttop (1.3) and Smartbook (2.0).
+ *
*/
-/* LED */
-#define EFIKAMX_LED_BLUE 0x1
-#define EFIKAMX_LED_GREEN 0x2
-#define EFIKAMX_LED_RED 0x4
-
-void efikamx_toggle_led(uint32_t mask);
-
-/* Board revisions */
#define EFIKAMX_BOARD_REV_11 0x1
#define EFIKAMX_BOARD_REV_12 0x2
#define EFIKAMX_BOARD_REV_13 0x3
/*
* Board identification
*/
-u32 get_efikamx_rev(void)
+static u32 get_mx_rev(void)
{
u32 rev = 0;
/*
* Retrieve board ID:
- * rev1.1: 1,1,1
- * rev1.2: 1,1,0
- * rev1.3: 1,0,1
- * rev1.4: 1,0,0
+ *
+ * gpio: 16 17 11
+ * ==============
+ * r1.1: 1+ 1 1
+ * r1.2: 1 1 0
+ * r1.3: 1 0 1
+ * r1.4: 1 0 0
+ *
+ * + note: r1.1 does not strap this pin properly so it needs to
+ * be hacked or ignored.
*/
- mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO);
- /* set to 1 in order to get correct value on board rev1.1 */
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), 1);
- mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS0, PAD_CTL_100K_PU);
- gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0));
- rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0))) << 0;
+ /* set to 1 in order to get correct value on board rev 1.1 */
+ gpio_direction_output(GPIO_NUMBER(3, 16), 1);
+ gpio_direction_input(GPIO_NUMBER(3, 11));
+ gpio_direction_input(GPIO_NUMBER(3, 16));
+ gpio_direction_input(GPIO_NUMBER(3, 17));
- mxc_request_iomux(MX51_PIN_NANDF_CS1, IOMUX_CONFIG_GPIO);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS1, PAD_CTL_100K_PU);
- gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1));
- rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1))) << 1;
-
- mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_GPIO);
- mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, PAD_CTL_100K_PU);
- gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3));
- rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3))) << 2;
+ rev |= (!!gpio_get_value(GPIO_NUMBER(3, 16))) << 0;
+ rev |= (!!gpio_get_value(GPIO_NUMBER(3, 17))) << 1;
+ rev |= (!!gpio_get_value(GPIO_NUMBER(3, 11))) << 2;
return (~rev & 0x7) + 1;
}
-inline u32 get_efikasb_rev(void)
+static iomux_v3_cfg_t efikasb_revision_pads[] = {
+ MX51_PAD_EIM_CS3__GPIO2_28,
+ MX51_PAD_EIM_CS4__GPIO2_29,
+};
+
+static inline u32 get_sb_rev(void)
{
u32 rev = 0;
- mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_GPIO);
- mxc_iomux_set_pad(MX51_PIN_EIM_CS3, PAD_CTL_100K_PU);
- gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_EIM_CS3));
- rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS3))) << 0;
+ imx_iomux_v3_setup_multiple_pads(efikasb_revision_pads,
+ ARRAY_SIZE(efikasb_revision_pads));
+ gpio_direction_input(GPIO_NUMBER(2, 28));
+ gpio_direction_input(GPIO_NUMBER(2, 29));
- mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_GPIO);
- mxc_iomux_set_pad(MX51_PIN_EIM_CS4, PAD_CTL_100K_PU);
- gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_EIM_CS4));
- rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS4))) << 1;
+ rev |= (!!gpio_get_value(GPIO_NUMBER(2, 28))) << 0;
+ rev |= (!!gpio_get_value(GPIO_NUMBER(2, 29))) << 1;
return rev;
}
-inline uint32_t get_efika_rev(void)
+inline uint32_t get_efikamx_rev(void)
{
if (machine_is_efikamx())
- return get_efikamx_rev();
- else
- return get_efikasb_rev();
+ return get_mx_rev();
+ else if (machine_is_efikasb())
+ return get_sb_rev();
}
u32 get_board_rev(void)
{
- return get_cpu_rev() | (get_efika_rev() << 8);
+ return get_cpu_rev() | (get_efikamx_rev() << 8);
}
/*
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
- PHYS_SDRAM_1_SIZE);
+ PHYS_SDRAM_1_SIZE);
return 0;
}
/*
* UART configuration
*/
-static void setup_iomux_uart(void)
-{
- unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
- PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH;
-
- mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad);
- mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad);
-}
+static iomux_v3_cfg_t efikamx_uart_pads[] = {
+ MX51_PAD_UART1_RXD__UART1_RXD,
+ MX51_PAD_UART1_TXD__UART1_TXD,
+ MX51_PAD_UART1_RTS__UART1_RTS,
+ MX51_PAD_UART1_CTS__UART1_CTS,
+};
/*
* SPI configuration
*/
-#ifdef CONFIG_MXC_SPI
-static void setup_iomux_spi(void)
-{
- /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
- mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
-
- /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
-
- /* Configure SS0 as a GPIO */
- mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_GPIO);
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0), 0);
-
- /* Configure SS1 as a GPIO */
- mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_GPIO);
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), 1);
-
- /* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
-
- /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
-}
-#else
-static inline void setup_iomux_spi(void) { }
-#endif
+static iomux_v3_cfg_t efikamx_spi_pads[] = {
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
+ MX51_PAD_CSPI1_SS0__GPIO4_24,
+ MX51_PAD_CSPI1_SS1__GPIO4_25,
+ MX51_PAD_GPIO1_6__GPIO1_6,
+};
+
+#define EFIKAMX_SPI_SS0 GPIO_NUMBER(4, 24)
+#define EFIKAMX_SPI_SS1 GPIO_NUMBER(4, 25)
+#define EFIKAMX_PMIC_IRQ GPIO_NUMBER(1, 6)
/*
* PMIC configuration
/* Set core voltage to 1.1V */
pmic_reg_read(p, REG_SW_0, &val);
- val = (val & ~SWx_VOLT_MASK) | SWx_1_200V;
+ val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
pmic_reg_write(p, REG_SW_0, val);
/* Setup VCC (SW2) to 1.25 */
* MMC configuration
*/
#ifdef CONFIG_FSL_ESDHC
+
struct fsl_esdhc_cfg esdhc_cfg[2] = {
{MMC_SDHC1_BASE_ADDR, 1},
{MMC_SDHC2_BASE_ADDR, 1},
};
-static inline uint32_t efika_mmc_cd(void)
+static iomux_v3_cfg_t efikamx_sdhc1_pads[] = {
+ MX51_PAD_SD1_CMD__SD1_CMD,
+ MX51_PAD_SD1_CLK__SD1_CLK,
+ MX51_PAD_SD1_DATA0__SD1_DATA0,
+ MX51_PAD_SD1_DATA1__SD1_DATA1,
+ MX51_PAD_SD1_DATA2__SD1_DATA2,
+ MX51_PAD_SD1_DATA3__SD1_DATA3,
+ MX51_PAD_GPIO1_1__SD1_WP,
+};
+
+#define EFIKAMX_SDHC1_WP GPIO_NUMBER(1, 1)
+
+static iomux_v3_cfg_t efikamx_sdhc1_cd_pads[] = {
+ MX51_PAD_GPIO1_0__SD1_CD,
+ MX51_PAD_EIM_CS2__SD1_CD,
+};
+
+#define EFIKAMX_SDHC1_CD GPIO_NUMBER(1, 0)
+#define EFIKASB_SDHC1_CD GPIO_NUMBER(2, 27)
+
+static iomux_v3_cfg_t efikasb_sdhc2_pads[] = {
+ MX51_PAD_SD2_CMD__SD2_CMD,
+ MX51_PAD_SD2_CLK__SD2_CLK,
+ MX51_PAD_SD2_DATA0__SD2_DATA0,
+ MX51_PAD_SD2_DATA1__SD2_DATA1,
+ MX51_PAD_SD2_DATA2__SD2_DATA2,
+ MX51_PAD_SD2_DATA3__SD2_DATA3,
+ MX51_PAD_GPIO1_7__SD2_WP,
+ MX51_PAD_GPIO1_8__SD2_CD,
+};
+
+#define EFIKASB_SDHC2_CD GPIO_NUMBER(1, 8)
+#define EFIKASB_SDHC2_WP GPIO_NUMBER(1, 7)
+
+static inline uint32_t efikamx_mmc_getcd(u32 base)
{
- if (machine_is_efikamx())
- return MX51_PIN_GPIO1_0;
+ if (base == MMC_SDHC1_BASE_ADDR)
+ if (machine_is_efikamx())
+ return EFIKAMX_SDHC1_CD;
+ else
+ return EFIKASB_SDHC1_CD;
else
- return MX51_PIN_EIM_CS2;
+ return EFIKASB_SDHC2_CD;
}
int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- uint32_t cd = efika_mmc_cd();
- int ret;
-
- if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- ret = !gpio_get_value(IOMUX_TO_GPIO(cd));
- else
- ret = !gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8));
+ uint32_t cd = efikamx_mmc_getcd(cfg->esdhc_base);
+ int ret = !gpio_get_value(cd);
return ret;
}
int board_mmc_init(bd_t *bis)
{
int ret;
- uint32_t cd = efika_mmc_cd();
-
- /* SDHC1 is used on all revisions, setup control pins first */
- mxc_request_iomux(cd,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(cd,
- PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
- PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU |
- PAD_CTL_ODE_OPENDRAIN_NONE |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_GPIO1_1,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
- PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
- PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
- PAD_CTL_SRE_FAST);
-
- gpio_direction_input(IOMUX_TO_GPIO(cd));
- gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1));
-
- /* Internal SDHC1 IOMUX + SDHC2 IOMUX on old boards */
- if (machine_is_efikasb() || (machine_is_efikamx() &&
- (get_efika_rev() < EFIKAMX_BOARD_REV_12))) {
- /* SDHC1 IOMUX */
- mxc_request_iomux(MX51_PIN_SD1_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
- PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_CLK,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
- PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
- PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
- PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
- PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
- PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
-
- /* SDHC2 IOMUX */
- mxc_request_iomux(MX51_PIN_SD2_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD2_CMD,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD2_CLK,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD2_CLK,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD2_DATA0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA0,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD2_DATA1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA1,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD2_DATA2, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA2,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD2_DATA3, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA3,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- /* SDHC2 Control lines IOMUX */
- mxc_request_iomux(MX51_PIN_GPIO1_7,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_7,
- PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
- PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU |
- PAD_CTL_ODE_OPENDRAIN_NONE |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_GPIO1_8,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_8,
- PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
- PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
- PAD_CTL_SRE_FAST);
-
- gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8));
- gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7));
-
- ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
+
+ /*
+ * All Efika MX boards use eSDHC1 with a common write-protect GPIO
+ */
+ imx_iomux_v3_setup_multiple_pads(efikamx_sdhc1_pads,
+ ARRAY_SIZE(efikamx_sdhc1_pads));
+ gpio_direction_input(EFIKAMX_SDHC1_WP);
+
+ /*
+ * Smartbook and Smarttop differ on the location of eSDHC1
+ * carrier-detect GPIO
+ */
+ if (machine_is_efikamx()) {
+ imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[0]);
+ gpio_direction_input(EFIKAMX_SDHC1_CD);
+ } else if (machine_is_efikasb()) {
+ imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[1]);
+ gpio_direction_input(EFIKASB_SDHC1_CD);
+ }
+
+ ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
+
+ if (machine_is_efikasb()) {
+
+ imx_iomux_v3_setup_multiple_pads(efikasb_sdhc2_pads,
+ ARRAY_SIZE(efikasb_sdhc2_pads));
+ gpio_direction_input(EFIKASB_SDHC2_CD);
+ gpio_direction_input(EFIKASB_SDHC2_WP);
if (!ret)
ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]);
- } else { /* New boards use only SDHC1 */
- /* SDHC1 IOMUX */
- mxc_request_iomux(MX51_PIN_SD1_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_CLK,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
}
return ret;
#endif
/*
- * ATA
+ * PATA
*/
-#ifdef CONFIG_MX51_PATA
-#define ATA_PAD_CONFIG (PAD_CTL_DRV_HIGH | PAD_CTL_DRV_VOT_HIGH)
-void setup_iomux_ata(void)
-{
- mxc_request_iomux(MX51_PIN_NANDF_ALE, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_ALE, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_RE_B, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_RE_B, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_WE_B, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_WE_B, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_CLE, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_CLE, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_RB0, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_RB0, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_WP_B, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_WP_B, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_GPIO_NAND, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_GPIO_NAND, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_RB1, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_RB1, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D0, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D0, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D1, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D1, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D2, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D2, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D3, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D3, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D4, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D4, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D5, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D5, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D6, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D6, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D7, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D7, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D8, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D9, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D10, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D11, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D12, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D12, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D13, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D14, ATA_PAD_CONFIG);
- mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT1);
- mxc_iomux_set_pad(MX51_PIN_NANDF_D15, ATA_PAD_CONFIG);
-}
-#else
-static inline void setup_iomux_ata(void) { }
-#endif
+static iomux_v3_cfg_t efikamx_pata_pads[] = {
+ MX51_PAD_NANDF_WE_B__PATA_DIOW,
+ MX51_PAD_NANDF_RE_B__PATA_DIOR,
+ MX51_PAD_NANDF_ALE__PATA_BUFFER_EN,
+ MX51_PAD_NANDF_CLE__PATA_RESET_B,
+ MX51_PAD_NANDF_WP_B__PATA_DMACK,
+ MX51_PAD_NANDF_RB0__PATA_DMARQ,
+ MX51_PAD_NANDF_RB1__PATA_IORDY,
+ MX51_PAD_GPIO_NAND__PATA_INTRQ,
+ MX51_PAD_NANDF_CS2__PATA_CS_0,
+ MX51_PAD_NANDF_CS3__PATA_CS_1,
+ MX51_PAD_NANDF_CS4__PATA_DA_0,
+ MX51_PAD_NANDF_CS5__PATA_DA_1,
+ MX51_PAD_NANDF_CS6__PATA_DA_2,
+ MX51_PAD_NANDF_D15__PATA_DATA15,
+ MX51_PAD_NANDF_D14__PATA_DATA14,
+ MX51_PAD_NANDF_D13__PATA_DATA13,
+ MX51_PAD_NANDF_D12__PATA_DATA12,
+ MX51_PAD_NANDF_D11__PATA_DATA11,
+ MX51_PAD_NANDF_D10__PATA_DATA10,
+ MX51_PAD_NANDF_D9__PATA_DATA9,
+ MX51_PAD_NANDF_D8__PATA_DATA8,
+ MX51_PAD_NANDF_D7__PATA_DATA7,
+ MX51_PAD_NANDF_D6__PATA_DATA6,
+ MX51_PAD_NANDF_D5__PATA_DATA5,
+ MX51_PAD_NANDF_D4__PATA_DATA4,
+ MX51_PAD_NANDF_D3__PATA_DATA3,
+ MX51_PAD_NANDF_D2__PATA_DATA2,
+ MX51_PAD_NANDF_D1__PATA_DATA1,
+ MX51_PAD_NANDF_D0__PATA_DATA0,
+};
/*
* EHCI USB
/*
* LED configuration
+ *
+ * Smarttop LED pad config is done in the DCD
+ *
*/
-void setup_iomux_led(void)
-{
- if (machine_is_efikamx()) {
- /* Blue LED */
- mxc_request_iomux(MX51_PIN_CSI1_D9, IOMUX_CONFIG_ALT3);
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), 0);
-
- /* Green LED */
- mxc_request_iomux(MX51_PIN_CSI1_VSYNC, IOMUX_CONFIG_ALT3);
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), 0);
-
- /* Red LED */
- mxc_request_iomux(MX51_PIN_CSI1_HSYNC, IOMUX_CONFIG_ALT3);
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), 0);
- } else {
- /* CAPS-LOCK LED */
- mxc_request_iomux(MX51_PIN_EIM_CS0, IOMUX_CONFIG_GPIO);
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_CS0), 0);
-
- /* ALARM-LED LED */
- mxc_request_iomux(MX51_PIN_GPIO1_3, IOMUX_CONFIG_GPIO);
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3), 0);
- }
-}
+#define EFIKAMX_LED_BLUE GPIO_NUMBER(3, 13)
+#define EFIKAMX_LED_GREEN GPIO_NUMBER(3, 14)
+#define EFIKAMX_LED_RED GPIO_NUMBER(3, 15)
-void efikamx_toggle_led(uint32_t mask)
-{
- if (machine_is_efikamx()) {
- gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9),
- mask & EFIKAMX_LED_BLUE);
- gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC),
- mask & EFIKAMX_LED_GREEN);
- gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC),
- mask & EFIKAMX_LED_RED);
- } else {
- gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS0),
- mask & EFIKAMX_LED_BLUE);
- gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3),
- !(mask & EFIKAMX_LED_GREEN));
- }
-}
+static iomux_v3_cfg_t efikasb_led_pads[] = {
+ MX51_PAD_GPIO1_3__GPIO1_3,
+ MX51_PAD_EIM_CS0__GPIO2_25,
+};
+
+#define EFIKASB_CAPSLOCK_LED GPIO_NUMBER(2, 25)
+#define EFIKASB_MESSAGE_LED GPIO_NUMBER(1, 3) /* Note: active low */
/*
* Board initialization
*/
int board_early_init_f(void)
{
- setup_iomux_uart();
- setup_iomux_spi();
- setup_iomux_led();
+ if (machine_is_efikasb()) {
+ imx_iomux_v3_setup_multiple_pads(efikasb_led_pads,
+ ARRAY_SIZE(efikasb_led_pads));
+ gpio_direction_output(EFIKASB_CAPSLOCK_LED, 0);
+ gpio_direction_output(EFIKASB_MESSAGE_LED, 1);
+ } else if (machine_is_efikamx()) {
+ /*
+ * Set up GPIO directions for LEDs.
+ * IOMUX has been done in the DCD already.
+ * Turn the red LED on for pre-relocation code.
+ */
+ gpio_direction_output(EFIKAMX_LED_BLUE, 0);
+ gpio_direction_output(EFIKAMX_LED_GREEN, 0);
+ gpio_direction_output(EFIKAMX_LED_RED, 1);
+ }
+
+ /*
+ * Both these pad configurations for UART and SPI are kind of redundant
+ * since they are the Power-On Defaults for the i.MX51. But, it seems we
+ * should make absolutely sure that they are set up correctly.
+ */
+ imx_iomux_v3_setup_multiple_pads(efikamx_uart_pads,
+ ARRAY_SIZE(efikamx_uart_pads));
+ imx_iomux_v3_setup_multiple_pads(efikamx_spi_pads,
+ ARRAY_SIZE(efikamx_spi_pads));
+
+ /* not technically required for U-Boot operation but do it anyway. */
+ gpio_direction_input(EFIKAMX_PMIC_IRQ);
+ /* Deselect both CS for now, otherwise NOR doesn't probe properly. */
+ gpio_direction_output(EFIKAMX_SPI_SS0, 0);
+ gpio_direction_output(EFIKAMX_SPI_SS1, 1);
return 0;
}
int board_late_init(void)
{
- setup_iomux_spi();
+ if (machine_is_efikamx()) {
+ /*
+ * Set up Blue LED for "In U-Boot" status.
+ * We're all relocated and ready to U-Boot!
+ */
+ gpio_set_value(EFIKAMX_LED_RED, 0);
+ gpio_set_value(EFIKAMX_LED_GREEN, 0);
+ gpio_set_value(EFIKAMX_LED_BLUE, 1);
+ }
power_init();
- setup_iomux_led();
- setup_iomux_ata();
+ imx_iomux_v3_setup_multiple_pads(efikamx_pata_pads,
+ ARRAY_SIZE(efikamx_pata_pads));
setup_iomux_usb();
if (machine_is_efikasb())
setenv("preboot", "usb reset ; setenv stdin usbkbd\0");
- setup_iomux_led();
-
- efikamx_toggle_led(EFIKAMX_LED_BLUE);
-
return 0;
}
int checkboard(void)
{
- u32 rev = get_efika_rev();
+ u32 rev = get_efikamx_rev();
- if (machine_is_efikamx()) {
- printf("Board: Efika MX, rev1.%i\n", rev & 0xf);
- return 0;
- } else {
- switch (rev) {
- case EFIKASB_BOARD_REV_13:
- printf("Board: Efika SB rev1.3\n");
- break;
- case EFIKASB_BOARD_REV_20:
- printf("Board: Efika SB rev2.0\n");
- break;
- default:
- printf("Board: Efika SB, rev Unknown\n");
- break;
- }
- }
+ printf("Board: Genesi Efika MX ");
+ if (machine_is_efikamx())
+ printf("Smarttop (1.%i)\n", rev & 0xf);
+ else if (machine_is_efikasb())
+ printf("Smartbook\n");
return 0;
}
projects / u-boot / commitdiff