CONFIG_CMD_RUN run command in env variable
CONFIG_CMD_SANDBOX * sb command to access sandbox features
CONFIG_CMD_SAVES * save S record dump
- CONFIG_SCSI * SCSI Support
CONFIG_CMD_SDRAM * print SDRAM configuration information
(requires CONFIG_CMD_I2C)
CONFIG_CMD_SF * Read/write/erase SPI NOR flash
imply FAT_WRITE
imply HASH_VERIFY
imply LZMA
+ imply SCSI
config SH
bool "SuperH architecture"
select BOARD_LATE_INIT
select SUPPORT_SPL
select ARCH_MISC_INIT
+ imply SCSI
help
Support for Freescale LS2080AQDS platform
The LS2080A Development System (QDS) is a high-performance
select BOARD_LATE_INIT
select SUPPORT_SPL
select ARCH_MISC_INIT
+ imply SCSI
help
Support for Freescale LS2080ARDB platform.
The LS2080A Reference design board (RDB) is a high-performance
select ARCH_LS1012A
select ARM64
select BOARD_LATE_INIT
+ imply SCSI
help
Support for Freescale LS1012ARDB platform.
The LS1012A Reference design board (RDB) is a high-performance
select LS1_DEEP_SLEEP
select SYS_FSL_DDR
select BOARD_EARLY_INIT_F
+ imply SCSI
config TARGET_LS1021ATWR
bool "Support ls1021atwr"
select ARCH_SUPPORT_PSCI
select LS1_DEEP_SLEEP
select BOARD_EARLY_INIT_F
+ imply SCSI
config TARGET_LS1021AIOT
bool "Support ls1021aiot"
select SUPPORT_SPL
select ARCH_LS1021A
select ARCH_SUPPORT_PSCI
+ imply SCSI
help
Support for Freescale LS1021AIOT platform.
The LS1021A Freescale board (IOT) is a high-performance
select BOARD_LATE_INIT
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ imply SCSI
help
Support for Freescale LS1043AQDS platform.
select BOARD_LATE_INIT
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ imply SCSI
help
Support for Freescale LS1043ARDB platform.
select SUPPORT_SPL
select DM_SPI_FLASH if DM_SPI
select BOARD_EARLY_INIT_F
+ imply SCSI
help
Support for Freescale LS1046AQDS platform.
The LS1046A Development System (QDS) is a high-performance
select DM_SPI_FLASH if DM_SPI
select POWER_MC34VR500
select BOARD_EARLY_INIT_F
+ imply SCSI
help
Support for Freescale LS1046ARDB platform.
The LS1046A Reference Design Board (RDB) is a high-performance
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
+ imply SCSI
menu "LS102xA architecture"
depends on ARCH_LS1021A
select SYS_FSL_HAS_DDR4
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ imply SCSI
config ARCH_LS1046A
bool
select SYS_FSL_SRDS_2
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ imply SCSI
config ARCH_LS2080A
bool
/* SATA */
#define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000)
-#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
config TARGET_MVEBU_ARMADA_37XX
bool "Support Armada 37xx platforms"
select ARMADA_3700
+ imply SCSI
config TARGET_DB_88F6720
bool "Support DB-88F6720 Armada 375"
bool "Support Armada 7k/8k platforms"
select ARMADA_8K
select BOARD_LATE_INIT
+ imply SCSI
config TARGET_DB_MV784MP_GP
bool "Support db-mv784mp-gp"
select DRA7XX
select TI_I2C_BOARD_DETECT
select PHYS_64BIT
+ imply SCSI
config TARGET_AM57XX_EVM
bool "AM57XX"
select BOARD_LATE_INIT
select DRA7XX
select TI_I2C_BOARD_DETECT
+ imply SCSI
endchoice
select ARCH_MPC8572
# Use DDR3 controller with DDR2 DIMMs on this board
select SYS_FSL_DDRC_GEN3
+ imply SCSI
config TARGET_P1010RDB_PA
bool "Support P1010RDB_PA"
config TARGET_MPC8641HPCN
bool "Support MPC8641HPCN"
select ARCH_MPC8641
+ imply SCSI
config TARGET_XPEDITE517X
bool "Support xpedite517x"
config TARGET_CONGA_QEVAL20_QA3_E3845
bool "congatec QEVAL 2.0 & conga-QA3/E3845"
select BOARD_LATE_INIT
+ imply SCSI
help
This is the congatec Qseven 2.0 evaluation carrier board
(conga-QEVAL) equipped with the conga-QA3/E3845-4G SoM.
config TARGET_DFI_BT700
bool "DFI BT700 BayTrail"
+ imply SCSI
help
This is the DFI Q7X-151 baseboard equipped with the
DFI BayTrail Bt700 SoM. It contains an Atom E3845 with
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_SUN4I_EMAC=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
+CONFIG_SCSI=y
CONFIG_DFU_RAM=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_SUN7I_GMAC=y
CONFIG_AXP_ALDO3_VOLT=2800
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_SUN7I_GMAC=y
CONFIG_AXP_ALDO3_VOLT=2800
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_SUN7I_GMAC=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_SCSI=y
CONFIG_AXP_DLDO4_VOLT=2500
CONFIG_AXP_ELDO3_VOLT=1200
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_NETCONSOLE=y
+CONFIG_SCSI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_SUN7I_GMAC=y
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_NETCONSOLE=y
+CONFIG_SCSI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_SUN7I_GMAC=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_SUN7I_GMAC=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_SUN4I_EMAC=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
+CONFIG_SCSI=y
CONFIG_DFU_RAM=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_SUN7I_GMAC=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_SUN7I_GMAC=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_SUN7I_GMAC=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_SUN7I_GMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_CMD_PING=y
# CONFIG_CMD_HASH is not set
CONFIG_CMD_EXT2=y
+CONFIG_SCSI=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_CMD_BMP=y
CONFIG_CMD_EXT2=y
CONFIG_DOS_PARTITION=y
+CONFIG_SCSI=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_SYS_NS16550=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_SUN4I_EMAC=y
CONFIG_SUNXI_NO_PMIC=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_SUN4I_EMAC=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_SUN7I_GMAC=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_SUN7I_GMAC=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_SUN7I_GMAC=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_SUN7I_GMAC=y
CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SCSI=y
CONFIG_CPU=y
CONFIG_MMC=y
CONFIG_MMC_PCI=y
CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
+CONFIG_SCSI=y
CONFIG_CPU=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_INTEL=y
CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SCSI=y
CONFIG_CPU=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_INTEL=y
CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SCSI=y
CONFIG_CPU=y
CONFIG_INTEL_BROADWELL_GPIO=y
CONFIG_CROS_EC=y
CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SCSI=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_LPC=y
CONFIG_SPI_FLASH=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
+CONFIG_SCSI=y
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_EFI_PARTITION=y
CONFIG_OF_BOARD_FIXUP=y
CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_SCSI=y
CONFIG_DM_GPIO=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SCSI=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_PCI=y
CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SCSI=y
CONFIG_CPU=y
CONFIG_MMC=y
CONFIG_MMC_PCI=y
# CONFIG_PARTITION_UUIDS is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_SCSI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_MV=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_PARTITION_UUIDS is not set
+CONFIG_SCSI=y
# CONFIG_MMC is not set
CONFIG_OF_LIBFDT=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
# CONFIG_BLK is not set
+CONFIG_SCSI=y
CONFIG_DM_MMC=y
# CONFIG_DM_MMC_OPS is not set
CONFIG_DM_SPI_FLASH=y
CONFIG_OF_CONTROL=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
+CONFIG_SCSI=y
CONFIG_FSL_CAAM=y
CONFIG_DM_SPI_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SCSI=y
CONFIG_CPU=y
CONFIG_MMC=y
CONFIG_MMC_PCI=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ISO_PARTITION=y
+CONFIG_SCSI=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_MMC_OMAP_HS=y
CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SCSI=y
CONFIG_CPU=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SCSI=y
CONFIG_DM_SCSI=y
CONFIG_SATA_CEVA=y
CONFIG_DFU_RAM=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SCSI=y
CONFIG_DM_SCSI=y
CONFIG_SATA_CEVA=y
CONFIG_DFU_RAM=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SCSI=y
CONFIG_DM_SCSI=y
CONFIG_SATA_CEVA=y
CONFIG_DFU_RAM=y
operations at present. The block device interface has not been converted
to driver model.
+config SCSI
+ bool "Support SCSI controllers"
+ help
+ This enables support for SCSI (Small Computer System Interface),
+ a parallel interface widely used with storage peripherals such as
+ hard drives and optical drives. The SCSI standards define physical
+ interfaces as well as protocols for controlling devices and
+ tranferring data.
+
config DM_SCSI
bool "Support SCSI controllers with driver model"
depends on BLK
#define CONFIG_CMD_READ /* Read data from partition */
#define CONFIG_CMD_SANDBOX /* sb command to access sandbox features */
#define CONFIG_CMD_SAVES /* save S record dump */
-#define CONFIG_SCSI /* SCSI Support */
#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
#define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */
#define CONFIG_CMD_UBIFS /* UBIFS Support */
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
- #define CONFIG_SCSI
#endif
/*
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
-#define CONFIG_SCSI
#endif
/*
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
-#define CONFIG_SCSI
#endif
#define CONFIG_WATCHDOG /* watchdog enabled */
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
- #define CONFIG_SCSI
#endif
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_OMAP_USB3PHY1_HOST
/* SATA */
-#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SPL_SATA_BOOT_DEVICE 0
#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1
-#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
* SATA/SCSI/AHCI configuration
*/
#define CONFIG_LIBATA
-#define CONFIG_SCSI
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
* Commands configuration
*/
#define CONFIG_CMD_PCI
-#define CONFIG_SCSI
/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_OMAP_USB2PHY2_HOST
/* SATA */
-#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#undef CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_IS_NOWHERE
#undef CONFIG_SCSI_AHCI
-#undef CONFIG_SCSI
#undef CONFIG_INTEL_ICH6_GPIO
#undef CONFIG_USB_EHCI_PCI
/* SATA is not supported in Quark SoC */
#undef CONFIG_SCSI_AHCI
-#undef CONFIG_SCSI
/* 10/100M Ethernet support */
#define CONFIG_DESIGNWARE_ETH
/*
* Command line configuration.
*/
-#define CONFIG_SCSI
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_RESET_TO_RETRY
/* SATA */
#define CONFIG_LIBATA
-#define CONFIG_SCSI
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_CMD_SCSI
/* SATA */
#define CONFIG_LIBATA
-#define CONFIG_SCSI
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_CMD_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SCSI
/* EEPROM */
#define CONFIG_ID_EEPROM
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SCSI
/* EEPROM */
#define CONFIG_ID_EEPROM
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SCSI
#define CONFIG_SYS_SATA AHCI_BASE_ADDR
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SCSI
#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1
#define CONFIG_SYS_SATA2 AHCI_BASE_ADDR2
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SCSI
#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1
#define CONFIG_SYS_SATA2 AHCI_BASE_ADDR2
/*
* SATA/SCSI/AHCI configuration
*/
-#define CONFIG_SCSI
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_LIBATA
/*
* SATA/SCSI/AHCI configuration
*/
-#define CONFIG_SCSI
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_LIBATA
#define CONSOLEDEV "ttyO2"
-#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_ATAPI
#undef CONFIG_SCSI_AHCI
-#undef CONFIG_SCSI
#else
#define CONFIG_SCSI_DEV_LIST \
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_AHCI}
#define CONFIG_SYS_ATA_STRIDE 4
#endif
-#define CONFIG_SCSI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_DEVICE 2
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 8
#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_SCSI
#endif
#define CONFIG_SETUP_MEMORY_TAGS
* Command line configuration.
*/
#define CONFIG_CMD_PCI
-#define CONFIG_SCSI
#define CONFIG_CMD_ZBOOT
#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_SCSI
#endif
#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
CONFIG_SCIF_CONSOLE
CONFIG_SCIF_EXT_CLOCK
CONFIG_SCIF_USE_EXT_CLK
-CONFIG_SCSI
CONFIG_SCSI_AHCI
CONFIG_SCSI_AHCI_PLAT
CONFIG_SCSI_DEV_ID