mx6cuboxi: Add support for sata

The Cubox-i and Hummingboard series of devices have an option of
SATA on board, and depending on how the fuses are blown even the
option to boot SPL from SATA. So enable support for it so it can
be used to boot the OS from if people desire.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Fabio Estevam <fabio.estevam@nxp.com>

diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index 285588d80a3aa46e440a479e2b14c7eb440af763..5c622164772d113462543831b2358af8332d978e 100644 (file)
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -22,6 +22,7 @@
 #include <linux/errno.h>
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/sata.h>
 #include <asm/imx-common/video.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
@@ -314,6 +315,10 @@ int board_early_init_f(void)
        ret = setup_display();
 #endif
 
+#ifdef CONFIG_CMD_SATA
+       setup_sata();
+#endif
+
 #ifdef CONFIG_USB_EHCI_MX6
        setup_usb();
 #endif

diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index bc22f56d1da14a828e0fc5d6ebad53282e3c6a0e..71acc7c4db3519a9d3273afda3db512a06efed21 100644 (file)
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -21,6 +21,17 @@
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC2_BASE_ADDR
 
+/* SATA Configuration */
+#define CONFIG_CMD_SATA
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE      1
+#define CONFIG_DWC_AHSATA_PORT_ID       0
+#define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+#endif
+
 /* Ethernet Configuration */
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
@@ -116,6 +127,7 @@
 
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
+       func(SATA, sata, 0) \
        func(USB, usb, 0) \
        func(PXE, pxe, na) \
        func(DHCP, dhcp, na)