]> git.sur5r.net Git - u-boot/commitdiff
powerpc/corenet_ds: Get rid of the SRIOBOOT_MASTER build target
authorLiu Gang <Gang.Liu@freescale.com>
Thu, 9 Aug 2012 05:09:59 +0000 (05:09 +0000)
committerAndy Fleming <afleming@freescale.com>
Thu, 23 Aug 2012 15:24:14 +0000 (10:24 -0500)
Get rid of the SRIOBOOT_MASTER build target, and to support for serving as
a SRIO boot master via environment variable. Set the environment variable
"bootmaster" to "SRIO1" or "SRIO2" using the following command:

setenv bootmaster SRIO1
saveenv

The "bootmaster" will enable the function of the SRIO boot master, and
this has the following advantages compared with SRIOBOOT_MASTER build
configuration:
1. Reduce a build configuration item in boards.cfg file.
   No longer need to build a special image for master, just use a
   normal target image and set the "bootmaster" variable.
2. No longer need to rebuild an image when change the SRIO port for
   boot from SRIO, just set the corresponding value to "bootmaster"
   based on the using SRIO port.

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
arch/powerpc/cpu/mpc85xx/cpu_init.c
arch/powerpc/cpu/mpc8xxx/srio.c
arch/powerpc/include/asm/fsl_srio.h
boards.cfg
include/configs/P2041RDB.h
include/configs/corenet_ds.h

index 74863b4a1a12246b9e8d823eea5cb82c7bd2cc28..f293265c860db62c688b2132bea82784d3bdcfe5 100644 (file)
@@ -480,11 +480,18 @@ skip_l2:
 
 #ifdef CONFIG_SYS_SRIO
        srio_init();
-#ifdef CONFIG_SRIOBOOT_MASTER
-       srio_boot_master();
-#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
-       srio_boot_master_release_slave();
-#endif
+#ifdef CONFIG_FSL_CORENET
+       char *s = getenv("bootmaster");
+       if (s) {
+               if (!strcmp(s, "SRIO1")) {
+                       srio_boot_master(1);
+                       srio_boot_master_release_slave(1);
+               }
+               if (!strcmp(s, "SRIO2")) {
+                       srio_boot_master(2);
+                       srio_boot_master_release_slave(2);
+               }
+       }
 #endif
 #endif
 
index c7f394972bf0d334b29ec3af94777f1fbfddd1f4..ae83d6e1729b696870d1eea7f5df002c603ab5f6 100644 (file)
@@ -95,126 +95,92 @@ void srio_init(void)
        }
 }
 
-#ifdef CONFIG_SRIOBOOT_MASTER
-void srio_boot_master(void)
+#ifdef CONFIG_FSL_CORENET
+void srio_boot_master(int port)
 {
        struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
 
        /* set port accept-all */
-       out_be32((void *)&srio->impl.port[CONFIG_SRIOBOOT_MASTER_PORT].ptaacr,
+       out_be32((void *)&srio->impl.port[port - 1].ptaacr,
                                SRIO_PORT_ACCEPT_ALL);
 
-       debug("SRIOBOOT - MASTER: Master port [ %d ] for srio boot.\n",
-                       CONFIG_SRIOBOOT_MASTER_PORT);
+       debug("SRIOBOOT - MASTER: Master port [ %d ] for srio boot.\n", port);
        /* configure inbound window for slave's u-boot image */
        debug("SRIOBOOT - MASTER: Inbound window for slave's image; "
                        "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n",
-                       (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1,
-                       (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1,
+                       (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_PHYS,
+                       (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_BUS1,
                        CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE);
-       out_be32((void *)&srio->atmu
-                       .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwtar,
-                       CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1 >> 12);
-       out_be32((void *)&srio->atmu
-                       .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwbar,
-                       CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1 >> 12);
-       out_be32((void *)&srio->atmu
-                       .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwar,
+       out_be32((void *)&srio->atmu.port[port - 1].inbw[0].riwtar,
+                       CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_PHYS >> 12);
+       out_be32((void *)&srio->atmu.port[port - 1].inbw[0].riwbar,
+                       CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_BUS1 >> 12);
+       out_be32((void *)&srio->atmu.port[port - 1].inbw[0].riwar,
                        SRIO_IB_ATMU_AR
                        | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE));
 
        /* configure inbound window for slave's u-boot image */
        debug("SRIOBOOT - MASTER: Inbound window for slave's image; "
                        "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n",
-                       (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2,
-                       (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2,
+                       (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_PHYS,
+                       (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_BUS2,
                        CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE);
-       out_be32((void *)&srio->atmu
-                       .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwtar,
-                       CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2 >> 12);
-       out_be32((void *)&srio->atmu
-                       .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwbar,
-                       CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2 >> 12);
-       out_be32((void *)&srio->atmu
-                       .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwar,
+       out_be32((void *)&srio->atmu.port[port - 1].inbw[1].riwtar,
+                       CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_PHYS >> 12);
+       out_be32((void *)&srio->atmu.port[port - 1].inbw[1].riwbar,
+                       CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_BUS2 >> 12);
+       out_be32((void *)&srio->atmu.port[port - 1].inbw[1].riwar,
                        SRIO_IB_ATMU_AR
                        | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE));
 
-       /* configure inbound window for slave's ucode */
-       debug("SRIOBOOT - MASTER: Inbound window for slave's ucode; "
+       /* configure inbound window for slave's ucode and ENV */
+       debug("SRIOBOOT - MASTER: Inbound window for slave's ucode and ENV; "
                        "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n",
-                       (u64)CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS,
-                       (u64)CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS,
-                       CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE);
-       out_be32((void *)&srio->atmu
-                       .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwtar,
-                       CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS >> 12);
-       out_be32((void *)&srio->atmu
-                       .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwbar,
-                       CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS >> 12);
-       out_be32((void *)&srio->atmu
-                       .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwar,
-                       SRIO_IB_ATMU_AR
-                       | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE));
-
-       /* configure inbound window for slave's ENV */
-       debug("SRIOBOOT - MASTER: Inbound window for slave's ENV; "
-                       "Local = 0x%llx, Siro = 0x%llx, Size = 0x%x\n",
-                       CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS,
-                       CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS,
-                       CONFIG_SRIOBOOT_SLAVE_ENV_SIZE);
-       out_be32((void *)&srio->atmu
-                       .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwtar,
-                       CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS >> 12);
-       out_be32((void *)&srio->atmu
-                       .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwbar,
-                       CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS >> 12);
-       out_be32((void *)&srio->atmu
-                       .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwar,
+                       (u64)CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_MEM_PHYS,
+                       (u64)CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_MEM_BUS,
+                       CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_SIZE);
+       out_be32((void *)&srio->atmu.port[port - 1].inbw[2].riwtar,
+                       CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_MEM_PHYS >> 12);
+       out_be32((void *)&srio->atmu.port[port - 1].inbw[2].riwbar,
+                       CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_MEM_BUS >> 12);
+       out_be32((void *)&srio->atmu.port[port - 1].inbw[2].riwar,
                        SRIO_IB_ATMU_AR
-                       | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_ENV_SIZE));
+                       | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_SIZE));
 }
 
-#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
-void srio_boot_master_release_slave(void)
+void srio_boot_master_release_slave(int port)
 {
        struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
        u32 escsr;
        debug("SRIOBOOT - MASTER: "
                        "Check the port status and release slave core ...\n");
 
-       escsr = in_be32((void *)&srio->lp_serial
-                       .port[CONFIG_SRIOBOOT_MASTER_PORT].pescsr);
+       escsr = in_be32((void *)&srio->lp_serial.port[port - 1].pescsr);
        if (escsr & 0x2) {
                if (escsr & 0x10100) {
                        debug("SRIOBOOT - MASTER: Port [ %d ] is error.\n",
-                                       CONFIG_SRIOBOOT_MASTER_PORT);
+                               port);
                } else {
                        debug("SRIOBOOT - MASTER: "
-                                       "Port [ %d ] is ready, now release slave's core ...\n",
-                                       CONFIG_SRIOBOOT_MASTER_PORT);
+                               "Port [ %d ] is ready, now release slave's core ...\n",
+                               port);
                        /*
                         * configure outbound window
                         * with maintenance attribute to set slave's LCSBA1CSR
                         */
-                       out_be32((void *)&srio->atmu
-                               .port[CONFIG_SRIOBOOT_MASTER_PORT]
+                       out_be32((void *)&srio->atmu.port[port - 1]
                                .outbw[1].rowtar, 0);
-                       out_be32((void *)&srio->atmu
-                               .port[CONFIG_SRIOBOOT_MASTER_PORT]
+                       out_be32((void *)&srio->atmu.port[port - 1]
                                .outbw[1].rowtear, 0);
-                       if (CONFIG_SRIOBOOT_MASTER_PORT)
-                               out_be32((void *)&srio->atmu
-                                       .port[CONFIG_SRIOBOOT_MASTER_PORT]
+                       if (port - 1)
+                               out_be32((void *)&srio->atmu.port[port - 1]
                                        .outbw[1].rowbar,
                                        CONFIG_SYS_SRIO2_MEM_PHYS >> 12);
                        else
-                               out_be32((void *)&srio->atmu
-                                       .port[CONFIG_SRIOBOOT_MASTER_PORT]
+                               out_be32((void *)&srio->atmu.port[port - 1]
                                        .outbw[1].rowbar,
                                        CONFIG_SYS_SRIO1_MEM_PHYS >> 12);
-                       out_be32((void *)&srio->atmu
-                                       .port[CONFIG_SRIOBOOT_MASTER_PORT]
+                       out_be32((void *)&srio->atmu.port[port - 1]
                                        .outbw[1].rowar,
                                        SRIO_OB_ATMU_AR_MAINT
                                        | atmu_size_mask(SRIO_MAINT_WIN_SIZE));
@@ -223,27 +189,22 @@ void srio_boot_master_release_slave(void)
                         * configure outbound window
                         * with R/W attribute to set slave's BRR
                         */
-                       out_be32((void *)&srio->atmu
-                               .port[CONFIG_SRIOBOOT_MASTER_PORT]
+                       out_be32((void *)&srio->atmu.port[port - 1]
                                .outbw[2].rowtar,
                                SRIO_LCSBA1CSR >> 9);
-                       out_be32((void *)&srio->atmu
-                               .port[CONFIG_SRIOBOOT_MASTER_PORT]
+                       out_be32((void *)&srio->atmu.port[port - 1]
                                .outbw[2].rowtear, 0);
-                       if (CONFIG_SRIOBOOT_MASTER_PORT)
-                               out_be32((void *)&srio->atmu
-                                       .port[CONFIG_SRIOBOOT_MASTER_PORT]
+                       if (port - 1)
+                               out_be32((void *)&srio->atmu.port[port - 1]
                                        .outbw[2].rowbar,
                                        (CONFIG_SYS_SRIO2_MEM_PHYS
                                        + SRIO_MAINT_WIN_SIZE) >> 12);
                        else
-                               out_be32((void *)&srio->atmu
-                                       .port[CONFIG_SRIOBOOT_MASTER_PORT]
+                               out_be32((void *)&srio->atmu.port[port - 1]
                                        .outbw[2].rowbar,
                                        (CONFIG_SYS_SRIO1_MEM_PHYS
                                        + SRIO_MAINT_WIN_SIZE) >> 12);
-                       out_be32((void *)&srio->atmu
-                               .port[CONFIG_SRIOBOOT_MASTER_PORT]
+                       out_be32((void *)&srio->atmu.port[port - 1]
                                .outbw[2].rowar,
                                SRIO_OB_ATMU_AR_RW
                                | atmu_size_mask(SRIO_RW_WIN_SIZE));
@@ -252,7 +213,7 @@ void srio_boot_master_release_slave(void)
                         * Set the LCSBA1CSR register in slave
                         * by the maint-outbound window
                         */
-                       if (CONFIG_SRIOBOOT_MASTER_PORT) {
+                       if (port - 1) {
                                out_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT
                                        + SRIO_LCSBA1CSR_OFFSET,
                                        SRIO_LCSBA1CSR);
@@ -289,8 +250,6 @@ void srio_boot_master_release_slave(void)
                                        "Release slave successfully! Now the slave should start up!\n");
                }
        } else
-               debug("SRIOBOOT - MASTER: Port [ %d ] is not ready.\n",
-                               CONFIG_SRIOBOOT_MASTER_PORT);
+               debug("SRIOBOOT - MASTER: Port [ %d ] is not ready.\n", port);
 }
 #endif
-#endif
index a905a266c4dda5480f720d14c4dea7f0166dc26e..dfd8e08f3ed6a5c32632a6ee86c2054744cef57c 100644 (file)
@@ -55,10 +55,8 @@ enum atmu_size {
 #define atmu_size_bytes(x)     (1ULL << ((x & 0x3f) + 1))
 
 extern void srio_init(void);
-#ifdef CONFIG_SRIOBOOT_MASTER
-extern void srio_boot_master(void);
-#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
-extern void srio_boot_master_release_slave(void);
-#endif
+#ifdef CONFIG_FSL_CORENET
+extern void srio_boot_master(int port);
+extern void srio_boot_master_release_slave(int port);
 #endif
 #endif
index fdb84ad293f748c8c6ceaaeb72a6cdd4d3ba0fb0..a408405e6d43a023759a82eb9ee0de9fced2bcc3 100644 (file)
@@ -787,12 +787,12 @@ P2041RDB_NAND                  powerpc     mpc85xx     p2041rdb            freescale
 P2041RDB_SDCARD              powerpc     mpc85xx     p2041rdb            freescale      -           P2041RDB:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
 P2041RDB_SECURE_BOOT         powerpc     mpc85xx     p2041rdb            freescale      -           P2041RDB:SECURE_BOOT
 P2041RDB_SPIFLASH            powerpc     mpc85xx     p2041rdb            freescale      -           P2041RDB:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
+P2041RDB_SRIOBOOT_SLAVE          powerpc     mpc85xx     p2041rdb          freescale      -           P2041RDB:SRIOBOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
 P3041DS                      powerpc     mpc85xx     corenet_ds          freescale
 P3041DS_NAND                powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
 P3041DS_SDCARD              powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
 P3041DS_SECURE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:SECURE_BOOT
 P3041DS_SPIFLASH            powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
-P3041DS_SRIOBOOT_MASTER                     powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:SRIOBOOT_MASTER
 P3041DS_SRIOBOOT_SLAVE          powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:SRIOBOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
 P3060QDS                    powerpc     mpc85xx     p3060qds            freescale
 P3060QDS_NAND               powerpc     mpc85xx     p3060qds            freescale      -           P3060QDS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
@@ -801,14 +801,12 @@ P4080DS                      powerpc     mpc85xx     corenet_ds          freesca
 P4080DS_SDCARD              powerpc     mpc85xx     corenet_ds          freescale      -           P4080DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
 P4080DS_SECURE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P4080DS:SECURE_BOOT
 P4080DS_SPIFLASH            powerpc     mpc85xx     corenet_ds          freescale      -           P4080DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
-P4080DS_SRIOBOOT_MASTER                     powerpc     mpc85xx     corenet_ds          freescale      -           P4080DS:SRIOBOOT_MASTER
 P4080DS_SRIOBOOT_SLAVE          powerpc     mpc85xx     corenet_ds          freescale      -           P4080DS:SRIOBOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
 P5020DS                      powerpc     mpc85xx     corenet_ds          freescale
 P5020DS_NAND                powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
 P5020DS_SDCARD              powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
 P5020DS_SECURE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:SECURE_BOOT
 P5020DS_SPIFLASH            powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
-P5020DS_SRIOBOOT_MASTER                     powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:SRIOBOOT_MASTER
 P5020DS_SRIOBOOT_SLAVE          powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:SRIOBOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
 BSC9131RDB_SPIFLASH          powerpc     mpc85xx     bsc9131rdb          freescale      -           BSC9131RDB:BSC9131RDB,SPIFLASH
 stxgp3                       powerpc     mpc85xx     stxgp3              stx
index 1c0eb7401757afb7b9b97f6b4f0d32389cb12c33..46a5e4c7aca641e93a74db6070f0b09889123298 100644 (file)
 #define CONFIG_RESET_VECTOR_ADDRESS    0xfffffffc
 #endif
 
+#ifdef CONFIG_SRIOBOOT_SLAVE
+/* Set 1M boot space */
+#define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS \
+               (0x300000000ull | CONFIG_SYS_SRIOBOOT_SLAVE_ADDR)
+#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CONFIG_SYS_NO_FLASH
+#endif
+
 /* High Level Configuration Options */
 #define CONFIG_BOOKE
 #define CONFIG_E500                    /* BOOKE e500 family */
@@ -73,7 +82,7 @@
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_SYS_NO_FLASH
-#ifndef CONFIG_RAMBOOT_PBL
+#if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIOBOOT_SLAVE)
 #define CONFIG_ENV_IS_NOWHERE
 #endif
 #else
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE                        CONFIG_SYS_NAND_BLOCK_SIZE
 #define CONFIG_ENV_OFFSET              (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIOBOOT_SLAVE)
+#define CONFIG_ENV_IS_IN_REMOTE
+#define CONFIG_ENV_ADDR                0xffe20000
+#define CONFIG_ENV_SIZE                0x2000
 #elif defined(CONFIG_ENV_IS_NOWHERE)
-       #define CONFIG_ENV_SIZE         0x2000
+#define CONFIG_ENV_SIZE                0x2000
 #else
        #define CONFIG_ENV_IS_IN_FLASH
        #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE \
@@ -373,6 +386,38 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 #define CONFIG_SYS_SRIO2_MEM_SIZE      0x10000000      /* 256M */
 
+/*
+ * for slave u-boot IMAGE instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_PHYS 0xfef080000ull
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_BUS1 0xfff80000ull
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE 0x80000       /* 512K */
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_BUS2 0x3fff80000ull
+/*
+ * for slave UCODE and ENV instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_MEM_PHYS 0xfef040000ull
+#define CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_MEM_BUS 0x3ffe00000ull
+#define CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_SIZE 0x40000   /* 256K */
+
+/* slave core release by master*/
+#define CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET 0xe00e4
+#define CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK 0x00000001 /* release core 0 */
+
+/*
+ * SRIOBOOT - SLAVE
+ */
+#ifdef CONFIG_SRIOBOOT_SLAVE
+/* slave port for srioboot */
+#define CONFIG_SRIOBOOT_SLAVE_PORT0
+/* #define CONFIG_SRIOBOOT_SLAVE_PORT1 */
+#define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR 0xFFE00000
+#define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS \
+               (0x300000000ull | CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR)
+#endif
+
 /*
  * eSPI - Enhanced SPI
  */
@@ -485,6 +530,16 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 #define CONFIG_SYS_QE_FMAN_FW_ADDR     (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIOBOOT_SLAVE)
+/*
+ * Slave has no ucode locally, it can fetch this from remote. When implementing
+ * in two corenet boards, slave's ucode could be stored in master's memory
+ * space, the address can be mapped from slave TLB->slave LAW->
+ * slave SRIO outbound window->master inbound window->master LAW->
+ * the ucode address in master's NOR flash.
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
+#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xFFE00000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_QE_FMAN_FW_ADDR     0xEF000000
index f8f7a82aa969bbd95ba32aae4b377933a8e15677..7f3af21c10bc795980893663b4b3087c581038bd 100644 (file)
 #endif
 #define CONFIG_SYS_SRIO2_MEM_SIZE      0x10000000      /* 256M */
 
-/*
- * SRIOBOOT - MASTER
- */
-#ifdef CONFIG_SRIOBOOT_MASTER
-/* master port for srioboot*/
-#define CONFIG_SRIOBOOT_MASTER_PORT 0
-/* #define CONFIG_SRIOBOOT_MASTER_PORT 1 */
 /*
  * for slave u-boot IMAGE instored in master memory space,
  * PHYS must be aligned based on the SIZE
  */
-#define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1 0xfef080000ull
-#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1 0xfff80000ull
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_PHYS 0xfef080000ull
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_BUS1 0xfff80000ull
 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE 0x80000       /* 512K */
-#define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2 0xfef080000ull
-#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2 0x3fff80000ull
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_MEM_BUS2 0x3fff80000ull
 /*
- * for slave UCODE instored in master memory space,
+ * for slave UCODE and ENV instored in master memory space,
  * PHYS must be aligned based on the SIZE
  */
-#define CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS 0xfef020000ull
-#define CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS 0x3ffe00000ull
-#define CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE 0x10000       /* 64K */
-/*
- * for slave ENV instored in master memory space,
- * PHYS must be aligned based on the SIZE
- */
-#define CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS 0xfef060000ull
-#define CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS 0x3ffe20000ull
-#define CONFIG_SRIOBOOT_SLAVE_ENV_SIZE 0x20000 /* 128K */
+#define CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_MEM_PHYS 0xfef040000ull
+#define CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_MEM_BUS 0x3ffe00000ull
+#define CONFIG_SRIOBOOT_SLAVE_UCODE_ENV_SIZE 0x40000   /* 256K */
+
 /* slave core release by master*/
-#define CONFIG_SRIOBOOT_SLAVE_HOLDOFF
 #define CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET 0xe00e4
 #define CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK 0x00000001 /* release core 0 */
-#endif
 
 /*
  * SRIOBOOT - SLAVE