stm32f4: add cpu clock option for 180 MHz

While most stm32f4 run at 168 MHz, stm32f429 can work till 180 MHz.
Add option to select 180 MHz through macro CONFIG_SYS_CLK_FREQ.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
To: Albert Aribaud <albert.u.boot@aribaud.net>
To: Tom Rini <trini@konsulko.com>
To: Kamil Lulko <rev13@wp.pl>
Cc: u-boot@lists.denx.de

diff --git a/arch/arm/cpu/armv7m/stm32f4/clock.c b/arch/arm/cpu/armv7m/stm32f4/clock.c
index 2eded1f52e7ad4195c2221c6fb03a1e313b0a084..d520a13efdd6e83d144bf31deb750b4a2ae492f9 100644 (file)
--- a/arch/arm/cpu/armv7m/stm32f4/clock.c
+++ b/arch/arm/cpu/armv7m/stm32f4/clock.c
@@ -92,7 +92,20 @@ struct pll_psc {
 #error "CONFIG_STM32_HSE_HZ not defined!"
 #else
 #if (CONFIG_STM32_HSE_HZ == 8000000)
-struct pll_psc pll_psc_168 = {
+#if (CONFIG_SYS_CLK_FREQ == 180000000)
+/* 180 MHz */
+struct pll_psc sys_pll_psc = {
+       .pll_m = 8,
+       .pll_n = 360,
+       .pll_p = 2,
+       .pll_q = 8,
+       .ahb_psc = AHB_PSC_1,
+       .apb1_psc = APB_PSC_4,
+       .apb2_psc = APB_PSC_2
+};
+#else
+/* default 168 MHz */
+struct pll_psc sys_pll_psc = {
        .pll_m = 8,
        .pll_n = 336,
        .pll_p = 2,
@@ -101,6 +114,7 @@ struct pll_psc pll_psc_168 = {
        .apb1_psc = APB_PSC_4,
        .apb2_psc = APB_PSC_2
 };
+#endif
 #else
 #error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists"
 #endif
@@ -122,19 +136,19 @@ int configure_clocks(void)
        while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY))
                ;
 
-       /* Enable high performance mode, System frequency up to 168 MHz */
+       /* Enable high performance mode, System frequency up to 180 MHz */
        setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN);
        writel(PWR_CR_VOS_SCALE_MODE_1, &STM32_PWR->cr);
 
        setbits_le32(&STM32_RCC->cfgr, ((
-               pll_psc_168.ahb_psc << RCC_CFGR_HPRE_SHIFT)
-               | (pll_psc_168.apb1_psc << RCC_CFGR_PPRE1_SHIFT)
-               | (pll_psc_168.apb2_psc << RCC_CFGR_PPRE2_SHIFT)));
-
-       writel(pll_psc_168.pll_m
-               | (pll_psc_168.pll_n << RCC_PLLCFGR_PLLN_SHIFT)
-               | (((pll_psc_168.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT)
-               | (pll_psc_168.pll_q << RCC_PLLCFGR_PLLQ_SHIFT),
+               sys_pll_psc.ahb_psc << RCC_CFGR_HPRE_SHIFT)
+               | (sys_pll_psc.apb1_psc << RCC_CFGR_PPRE1_SHIFT)
+               | (sys_pll_psc.apb2_psc << RCC_CFGR_PPRE2_SHIFT)));
+
+       writel(sys_pll_psc.pll_m
+               | (sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT)
+               | (((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT)
+               | (sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT),
                &STM32_RCC->pllcfgr);
        setbits_le32(&STM32_RCC->pllcfgr, RCC_PLLCFGR_PLLSRC);