]> git.sur5r.net Git - openocd/history - src/jtag
Restore normal development cycle
[openocd] / src / jtag /
2015-05-17 Paul Fertserjtag/drivers/stlink: fix SRST issue with stlink-v1
2015-04-24 Paul Fertserjtag/drivers/ti_icdi: do not segfault when adapter...
2015-04-16 Simon Qianconfigure the SWD frequency when setting adapter speed...
2015-04-16 Uwe Bonnesstlink_usb.c: Decode some more errors.
2015-04-16 Spencer Olivercmsis-dap: print vendor and product id on open failure
2015-04-14 Paul Fertserjtag/startup.tcl: fix regression with autoselecting...
2015-04-14 Paul Fertserjtag/tcl: fix incorrect memcpy in jim_newtap_expected_id
2015-04-14 Ed Berosetstartup: Fixed measure_clk to return kHz instead of...
2015-04-14 Paul Fertserjtag/core: honour SRST timings in SWD mode
2015-03-25 Mateusz Manowieckijtag/drivers/ftdi.c: removed memory leak
2015-03-25 Paul Fertserdrivers/cmsis-dap: port to common SWD framework
2015-03-25 Paul Fertserarmv7m_trace, stlink: provide APIs to capture trace...
2015-03-25 Paul Fertserarmv7m: add generic trace support (TPIU, ITM, etc.)
2015-03-09 Andreas Färberjlink: Add variant "J-Link Lite-XMC4000"
2015-03-09 Andreas Färberjlink: Add variant "J-Link Lite-XMC4200"
2015-03-09 Paul Fertserhla/hla_interface: call HLA layout API close() on quit
2015-03-09 Paul Fertserstlink: avoid null pointer dereference in stlink_usb_cl...
2015-03-09 Mateusz Manowieckijtag/drivers/buspirate: add JTAG_STABLECLOCKS cmd
2015-02-22 Jean-Christian de... Add SWD protocol support to sysfsgpio
2015-02-22 Jean-Christian de... Add SWD protocol support to bitbang
2015-02-11 Joerg FischerJ-Link serial number config option
2015-02-11 Nemui Trinomiusjlink: Added hardware version number for JLink firmware...
2015-01-30 Paul Fertserdrivers/stlink: clarify "init mode failed" message
2015-01-30 Paul Fertserjtag/drivers: remove useless checks causing build failu...
2015-01-30 Paul FertserUse (uint8_t *) for buf_(set|get)_u(32|64) instead...
2015-01-28 Andreas Fritiofsonjtag: Rewrite TAP verification/auto-probe logic
2015-01-26 Jaakko Kukkohovijtag/drivers/cmsis-dap-usb: fix cmsis_dap_serial
2015-01-26 Paul Fertserjtag/drivers/stlink: demote the output of available...
2015-01-26 Paul Fertserjtag/hla_interface: avoid segfault with adapters that...
2015-01-15 Spencer Oliverstlink: add reconfigurable speed support
2015-01-15 Spencer Oliverhla: add ability to change adapter speed (if supported)
2015-01-15 Paul Fertserjtag/hla: output possible idcode candidates in case...
2015-01-15 Evan Hunterjtag: Avoid extra SRSTn resets when connecting
2015-01-09 Paul Fertserswd: handle various failure conditions
2015-01-07 Andreas Fritiofsonjtag: Remove unnecessary global variable
2015-01-07 Andreas Fritiofsonjtag: Fix memory leaks in jtag_tap_free()
2014-11-24 Paul Fertserjtag/drivers/jlink: implement register command to fix SWD
2014-10-16 Spencer Olivercmsis-dap: add serial number support
2014-10-16 Spencer Olivercmsis-dap: refactor HID PID/VID check loop
2014-10-06 Paul Fertserlibusb: introduce jtag_libusb_choose_interface() and...
2014-10-06 Paul Fertserhla: add a way to pass arbitrary commands from user...
2014-10-06 Andersjtag/drivers/jlink.c: fix for LPC Link-2 running JLink...
2014-10-06 Andersjtag/drivers/libusb1_common: avoid device reset when...
2014-10-06 Spencer Oliverjtag: constify driver arrays
2014-09-29 Simon Qianvsllink: improve the performance when using swd
2014-09-22 Joakim Gebartmpsse: Display libusb error names instead of numbers
2014-09-22 Austin PhillipsSupport hla_serial command for ST-LINK adapters.
2014-09-15 Andrey Skvortsovjtag: drivers: stlink: remove unnecessary '\n' in LOG_...
2014-09-08 Paul Fertserjtag/drivers/libusb0_common: fix FTBFS (libusb_device_d...
2014-08-22 Paul Fertserjtag: always configure enabled tap parameter appropriately
2014-08-19 Angus Grattonjtag/drivers/ftdi: Use adapter_khz value for initial...
2014-08-19 Spencer Oliverjlink: Constantify string arrays
2014-08-19 Spencer Oliverjlink: add variant "J-Link Lite-ADI"
2014-08-19 Spencer Oliverjlink: fix typo
2014-08-19 Robert Jarzmikjtag: usb_blaster: fix initialization regression
2014-08-11 Angus Grattonstlink_usb: Fix swallowed error on read/write operation...
2014-08-11 Paul FertserAllow transports to override the selected target (hla...
2014-08-11 Angus Grattonnewdap: Ignore -irlen/-irmask/etc newdap params on...
2014-08-02 Andreas Fritiofsondrivers/jlink: Revert old workaround
2014-08-02 Paul Fertserdrivers/jlink: fix SWD speed config, and set it before...
2014-08-02 Paul Fertserdrivers/jtag/jlink: support SWD mode
2014-07-10 Masaki Muranakadrivers/cmsis_dap_usb: Return with ERROR_FAIL if no...
2014-07-03 Fatih Aşıcıvsllink: Port to libusb-1.0 API
2014-07-03 Fatih Aşıcıvsllink: Add SWD support
2014-07-03 Paul Fertserjtag/drivers/opendous: remove ftime() calls
2014-07-03 Paul Fertserdrivers/cmsis_dap_usb: restructure init sequence a bit
2014-07-03 Paul Fertserjtag/drivers/cmsis_dap: fix check for hardcoded vids...
2014-06-28 Paul Fertserjtag/drivers/ftdi: do not touch unavailable reset signals
2014-06-28 Paul Fertserjtag/drivers/ftdi: require defining SWD_EN signal for...
2014-06-28 Paul Fertserjtag/drivers/ftdi: declare standard JTAG signals on...
2014-06-28 Paul Fertserjtag/drivers/ftdi: add option to declare signal aliases
2014-06-28 Paul FertserAuto-select JTAG transport when appropriate
2014-06-28 Andreas FritiofsonRelax polling check if not in JTAG mode
2014-06-28 Andreas FritiofsonAdd FTDI SWD driver
2014-06-28 Andreas Fritiofsontransport: Constify the transports vector
2014-06-28 Andreas Fritiofsonswd: Add frequency setting and special/switching sequen...
2014-06-28 Andreas Fritiofsonswd: Remove support for turnaround periods other than 1
2014-06-28 Andreas Fritiofsonswd: Fix park bit polarity according to ADIv5.1 Supplement
2014-06-28 Andreas Fritiofsonswd: Convert API to asynchronous
2014-06-28 Paul Fertserdrivers/cmsis_dap_usb: remove jtag reset hacks
2014-06-28 Paul Fertsertcl: introduce using_(jtag|swd|hla) helpers and use...
2014-06-28 Andreas Fritiofsonswd: Improve parity calculation and move it to types.h
2014-06-28 Andreas Fritiofsonadi_v5: Remove unused features of the DAP and SWD inter...
2014-06-28 Fatih Aşıcıadi_v5_swd: Improve SWD support
2014-06-22 Paul Fertserjtag/drivers/jlink: better diagnostics for RCLK problems
2014-06-01 Paul Fertserjtag/drivers/osbdm: downgrade init message severity...
2014-06-01 Paul Fertserjtag/drivers/stlink: allow to reconnect seamlessly...
2014-05-09 Andreas Fritiofsonftdi: Optimize GPIO toggling
2014-04-14 Spencer Oliverusb_blaster: fix warning: array subscript has type...
2014-04-14 Paul Fertserjtag/drivers/remote_bitbang: use sizeof to determine...
2014-04-14 Karl Hammarparport: add "aspo" hotpluggable adapter config
2014-04-14 Paul FertserMakefile.am: fix build for libftdi1, pass CFLAGS where...
2014-04-08 Paul Fertserjtag/aice/aice_usb: remove unused constants
2014-03-30 Andreas FritiofsonDon't cast return value of [cm]alloc
2014-03-29 Paul FertserAdd usb_blaster cheap clone notes to dist
2014-03-29 Paul FertserAdd rlink speed table sources and everything related...
2014-03-29 Andrey Yurovskyjlink: add support for Jlink-OB (0x0105) devices
2014-03-28 Andreas Fritiofsonft2232: Mark interface driver as deprecated
2014-03-17 Jörg WunschCMSIS-DAP: print a debug message when the USB product...
2014-03-17 Jörg WunschAll Atmel-provided CMSIS-DAP devices use 512 byte packe...
next