]> git.sur5r.net Git - u-boot/log
u-boot
10 years agonand_spl: remove MPC8536DS support
Masahiro Yamada [Wed, 4 Jun 2014 01:26:50 +0000 (10:26 +0900)]
nand_spl: remove MPC8536DS support

Commit 3d5a335c announced that all the nand_spl boards
would be removed before v2014.07 release.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agonand_spl: remove MPC8569MDS_NAND support
Masahiro Yamada [Wed, 4 Jun 2014 01:26:49 +0000 (10:26 +0900)]
nand_spl: remove MPC8569MDS_NAND support

Commit 3d5a335c announced that all the nand_spl boards
would be removed before v2014.07 release.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agonand_spl: remove MPC8572DS_NAND support
Masahiro Yamada [Wed, 4 Jun 2014 01:26:48 +0000 (10:26 +0900)]
nand_spl: remove MPC8572DS_NAND support

Commit 3d5a335c announced that all the nand_spl boards
would be removed before v2014.07 release.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agonand_spl: remove P1023RDS_NAND support
Masahiro Yamada [Wed, 4 Jun 2014 01:26:47 +0000 (10:26 +0900)]
nand_spl: remove P1023RDS_NAND support

Commit 3d5a335c announced that all the nand_spl boards
would be removed before v2014.07 release.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agokbuild: move cmd_mkimage to scripts/Makefile.lib
Masahiro Yamada [Wed, 4 Jun 2014 01:12:21 +0000 (10:12 +0900)]
kbuild: move cmd_mkimage to scripts/Makefile.lib

Because cmd_mkimage is used in various subdirectories,
it seems reasonable to define it in scripts/Makefile.lib.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agokbuild: use cmd_shipped instead of cmd_copy
Masahiro Yamada [Wed, 4 Jun 2014 01:11:18 +0000 (10:11 +0900)]
kbuild: use cmd_shipped instead of cmd_copy

We already have cmd_shipped in scripts/Makefile.lib.
Use it rather than defining a new command cmd_copy.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agoboards.cfg: move many unmaintained boards to Orphan
Masahiro Yamada [Mon, 2 Jun 2014 07:30:53 +0000 (16:30 +0900)]
boards.cfg: move many unmaintained boards to Orphan

Emails to the following addresses have been bouncing.

Albin Tonnerre <albin.tonnerre@free-electrons.com>
Anton Shurpin <shurpin.aa@niistt.ru>
Brent Kandetzki <brentk@teleco.com>
Dan Malek <dan@embeddedalley.com>
Frank Panno <fpanno@delphintech.com>
Gary Jennejohn <garyj@denx.de>
Hayden Fraser <Hayden.Fraser@freescale.com>
Eric Millbrandt <emillbrandt@dekaresearch.com>
Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Kumar Gala <kumar.gala@freescale.com>
Joe D'Abbraccio <ljd015@freescale.com>
John Zhan <zhanz@sinovee.com>
Keith Outwater <Keith_Outwater@mvis.com>
Julien May <julien.may@miromico.ch>
Kári Davíðsson <kd@flaga.is>
Kyle Moffett <Kyle.D.Moffett@boeing.com>
Leo Sartre <lsartre@adeneo-embedded.com>
Mike Dunn <mikedunn@newsguy.com>
Dave Ellis <DGE@sixnetio.com>
Chan-Taek Park <c-park@ti.com>
Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>

I am Ccing the current working addresses for some of them.

If you want to get back an Orphan board to Active,
please update your email address.

Please do it only if you still have a real hardware to test on.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Albin Tonnerre <albin.tonnerre@gmail.com>
Cc: Anton Shurpin <anton.shurpin@gmail.com>
Cc: Brent Kandetzki <brent.kandetzki@stw-technic.com>
Cc: Dan Malek <dan.malek@konsulko.com>
Cc: Gary Jennejohn <gljennjohn@googlemail.com>
Cc: Haavard Skinnemoen <haavard.skinnemoen@gmail.com> ?
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Mike Dunn <mikedunn@newsguy.com>
CC: Jerry Van Baren <vanbaren@cideas.com>
10 years agoPrevent a buffer overflow in mkimage when signing with SHA256
Michael van der Westhuizen [Fri, 30 May 2014 18:59:00 +0000 (20:59 +0200)]
Prevent a buffer overflow in mkimage when signing with SHA256

Due to the FIT_MAX_HASH_LEN constant not having been updated
to support SHA256 signatures one will always see a buffer
overflow in fit_image_process_hash when signing images that
use this larger hash.  This is exposed by vboot_test.sh.

Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com>
Acked-by: Simon Glass <sjg@chromium.org>
[trini: Rework a bit so move the exportable parts of hash.h outside of
 !USE_HOSTCC and only need that as a new include to image.h]
Signed-off-by: Tom Rini <trini@ti.com>
10 years agompc8313, signed fit: enable legacy image format on ids8313 board
Heiko Schocher [Wed, 28 May 2014 09:33:34 +0000 (11:33 +0200)]
mpc8313, signed fit: enable legacy image format on ids8313 board

Enable legacy image format with CONFIG_IMAGE_FORMAT_LEGACY
on the ids8313 board, as it uses signed FIT images for booting
Linux and need the legacy image format.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Michael Conrad <Michael.Conrad@ids.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
10 years agobootm: make use of legacy image format configurable
Heiko Schocher [Wed, 28 May 2014 09:33:33 +0000 (11:33 +0200)]
bootm: make use of legacy image format configurable

make the use of legacy image format configurable through
the config define CONFIG_IMAGE_FORMAT_LEGACY.

When relying on signed FIT images with required signature check
the legacy image format should be disabled. Therefore introduce
this new define and enable legacy image format if CONFIG_FIT_SIGNATURE
is not set. If CONFIG_FIT_SIGNATURE is set disable per default
the legacy image format.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Lars Steubesand <lars.steubesand@philips.com>
Cc: Mike Pearce <mike@kaew.be>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: Simon Glass <sjg@chromium.org>
10 years agoFDT: Fix DTC repository references
Jon Loeliger [Tue, 27 May 2014 14:12:48 +0000 (09:12 -0500)]
FDT: Fix DTC repository references

The Device Tree Compiler (DTC) used to have its master
repository located on jdl.com.  While it is still there,
its official, new, shiny location is on kernel.org here:

    git://git.kernel.org/pub/scm/utils/dtc/dtc.git

Update a few references to point there instead.

Signed-off-by: Jon Loeliger <jdl@jdl.com>
Acked-by: Simon Glass <sjg@chromium.org>
10 years agodisk: part_efi: add get_partition_info_efi_by_name()
Steve Rae [Mon, 26 May 2014 18:52:24 +0000 (11:52 -0700)]
disk: part_efi: add get_partition_info_efi_by_name()

Add function to find a GPT table entry by name.

Tested on little endian ARMv7 and ARMv8 configurations

Signed-off-by: Steve Rae <srae@broadcom.com>
10 years agodisk: part_efi: clarify lbaint_t usage
Steve Rae [Mon, 26 May 2014 18:52:23 +0000 (11:52 -0700)]
disk: part_efi: clarify lbaint_t usage

- update the comments regarding lbaint_t usage
- cleanup casting of values related to the lbaint_t type
- cleanup of a type that requires a u64

Tested on little endian ARMv7 and ARMv8 configurations

Signed-off-by: Steve Rae <srae@broadcom.com>
10 years agodisk: part_efi: resolve endianness issues
Steve Rae [Mon, 26 May 2014 18:52:22 +0000 (11:52 -0700)]
disk: part_efi: resolve endianness issues

Tested on little endian ARMv7 and ARMv8 configurations

Signed-off-by: Steve Rae <srae@broadcom.com>
10 years agoenv_eeprom: Assign default environment during board_init_f
Siva Durga Prasad Paladugu [Mon, 26 May 2014 14:21:22 +0000 (19:51 +0530)]
env_eeprom: Assign default environment during board_init_f

Assign default environment and set env valid during board_init_f
before relocation as the actual environment will be read from eeprom
later.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Acked-by: Michal Simek <monstr@monstr.eu>
10 years agofat: Define MAX_CLUSTSIZE using CONFIG_FS_FAT_MAX_CLUSTSIZE
Siva Durga Prasad Paladugu [Mon, 26 May 2014 13:48:37 +0000 (19:18 +0530)]
fat: Define MAX_CLUSTSIZE using CONFIG_FS_FAT_MAX_CLUSTSIZE

Define the MAX_CLUSTSIZE to default of 65536 only if
CONFIG_FS_FAT_MAX_CLUSTSIZE is not defined.
This option has been provided to save memory in some
memory constrained cases.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Acked-by: Michal Simek <monstr@monstr.eu>
10 years agoopenrisc: fix relocation code
Franck Jullien [Wed, 21 May 2014 20:43:50 +0000 (22:43 +0200)]
openrisc: fix relocation code

The relocation code can now relocate from anywhere to
the RAM.

The old code assumed that the binary was copied to the RAM
by some PBL and then it just relocated the .text section
from the loaded address to the linked address.

Now, it first checks if vectors are somewhere else than the
linked address. If yes, there are copied to address 0 (or
to the exception vector base address if register EVBAR is
present).

Then, the .text section is relocated from its current location
to the RAM.

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
10 years agoopenrisc: update SPR registers definition
Franck Jullien [Wed, 21 May 2014 20:43:49 +0000 (22:43 +0200)]
openrisc: update SPR registers definition

The OpenRISC architecture specification v1.0 defines
new SPR registers. This patch adds registers definition
for group 0 and update bit definitions for the CPU
configuration register.

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
10 years agophy: fix create_phy_by_mask for when its given an actual search mask
Cormier, Jonathan [Wed, 21 May 2014 17:08:52 +0000 (13:08 -0400)]
phy: fix create_phy_by_mask for when its given an actual search mask

get_phy_id returns -EIO when it can't read from a phy at a given addr.  This would cause
create_phy_by_mask to return prematurely before it had tested the other addresses in the provided mask.

Example usage:
Replace
    phydev = phy_connect(bus, phy_addr, dev, phy_if)
with
    phydev = phy_find_by_mask(bus, phy_mask, phy_if)
    if (phydev)
phy_connect_dev(phydev, dev);

Signed-off-by: Cormier, Jonathan <jcormier@criticallink.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
10 years agoPrevent a stack overflow in fit_check_sign
Michael van der Westhuizen [Tue, 20 May 2014 13:58:58 +0000 (15:58 +0200)]
Prevent a stack overflow in fit_check_sign

It is trivial to crash fit_check_sign by invoking with an
absolute path in a deeply nested directory.  This is exposed
by vboot_test.sh.

Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com>
Acked-by: Simon Glass <sjg@chromium.org>
10 years agotools: Refactor mxsimage to use pbl_crc32
Charles Manning [Wed, 14 May 2014 02:45:01 +0000 (14:45 +1200)]
tools: Refactor mxsimage to use pbl_crc32

Both pblimage and mxsimage use the same crc algorithm, so refactor.

Signed-off-by: Charles Manning <cdhmanning@gmail.com>
10 years agomkimage : Split out and clean pbl_crc32 for use by other image types
Charles Manning [Wed, 14 May 2014 02:45:00 +0000 (14:45 +1200)]
mkimage : Split out and clean pbl_crc32 for use by other image types

The crc32 used by pblimgae is NOT the same as zlib crc32.

The pbl_crc32 is useful for other purposes in mkimage so split it out.

While we are about it, clean up redundant and confusing code.

Signed-off-by: Charles Manning <cdhmanning@gmail.com>
10 years agoCorrect return code from builtin_run_command_list()
Simon Glass [Fri, 30 May 2014 20:41:51 +0000 (14:41 -0600)]
Correct return code from builtin_run_command_list()

The return code is not consistent with cli_simple_run_command_list(). For the
last command in a sequence, the return code is actually inverted.

Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoFix hush to give the correct return code for a simple command
Simon Glass [Fri, 30 May 2014 20:41:50 +0000 (14:41 -0600)]
Fix hush to give the correct return code for a simple command

When a simple command like 'false' is provided, hush should return the
result of that command. However, hush only does this if the
FLAG_EXIT_FROM_LOOP flag is provided. Without this flag, hush will
happily execute the empty string command immediate after 'false' and
then return a success code.

This behaviour does not seem very useful, and requiring the flag also
seems wrong, since it means that hush will execute only the first command
in a sequence.

Add a check for empty string and fall out of the loop in that case. That
at least fixes the simple command case. This is a change in behaviour but
it is unlikely that the old behaviour would be considered correct in any
case.

Reported-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoFix itest mask overflow
Simon Glass [Fri, 30 May 2014 20:41:49 +0000 (14:41 -0600)]
Fix itest mask overflow

The mask value used in itest overflows and therefore it can return an
incorrect result for something like 'itest 0 == 1'. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoAdd final result tests for run_command_list()
Simon Glass [Fri, 30 May 2014 20:41:48 +0000 (14:41 -0600)]
Add final result tests for run_command_list()

run_command_list() is supposed to return a return code of 0 for success
and 1 for failure. Add a few simple tests that confirm this. These tests
work both with the built-in parser and hush.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoboards.cfg: fix a configuration error of ep8248 board again
Masahiro Yamada [Mon, 26 May 2014 10:42:14 +0000 (19:42 +0900)]
boards.cfg: fix a configuration error of ep8248 board again

"make ep8248_config" fails with an error like this:

    $ make ep8248_config
    make: *** [ep8248_config] Error 1

Its cause is that there are two entries for "ep8248".

The first is around line 661 of boards.cfg. (as Active)
The second appears around line 1242. (as Orphan)

This bug was originally introduced by commit e7e90901
and I fixed it by commit 8ad5d45e.
(Refer to git-log of commit 8ad5d45e)

But this bug was re-introduced by commit 05d134b0 because
the custodian made a mistake when he resolved a merge conflict.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Heiko Schocher <hs@denx.de>
Cc: Kim Phillips <kim.phillips@linaro.org>
10 years agokbuild: add missing PERL definition
Masahiro Yamada [Mon, 12 May 2014 02:45:55 +0000 (11:45 +0900)]
kbuild: add missing PERL definition

"checkstack" target uses $(PERL) so PERL must be defined.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agokbuild: remove unused RANLIB
Masahiro Yamada [Mon, 12 May 2014 02:45:54 +0000 (11:45 +0900)]
kbuild: remove unused RANLIB

RANLIB was added by commit e221174 (more than a decade ago)
but it has been never referenced at all.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agoarm: fdt_control: fix a build error with CONFIG_OF_EMBED=y
Masahiro Yamada [Fri, 25 Apr 2014 12:51:09 +0000 (21:51 +0900)]
arm: fdt_control: fix a build error with CONFIG_OF_EMBED=y

The build fails if a non-generic ARM board is compiled
with CONFIG_OF_EMBED=y.

The correct symbol name for embedded FDT is not __dtb_db_begin,
but __dtb_dt_begin. (A typo introduced by commit 6ab6b2af)

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
10 years agoMerge branch 'master' of git://git.denx.de/u-boot-arc
Tom Rini [Thu, 5 Jun 2014 15:46:34 +0000 (11:46 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-arc

10 years agoMerge branch 'master' of git://git.denx.de/u-boot-avr32
Tom Rini [Thu, 5 Jun 2014 15:22:17 +0000 (11:22 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-avr32

10 years agoARC: enable CONFIG_SYS_BOOT_RAMDISK_HIGH
Alexey Brodkin [Sat, 24 May 2014 08:17:20 +0000 (12:17 +0400)]
ARC: enable CONFIG_SYS_BOOT_RAMDISK_HIGH

This enables relocation of initrd to the end of available DDR before Linux
kernel start-up as it is done in other architectures.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
10 years agopowerpc: hiddendragon: remove orphan board
Masahiro Yamada [Fri, 30 May 2014 08:45:04 +0000 (17:45 +0900)]
powerpc: hiddendragon: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>
10 years agopowerpc: debris: remove orphan board
Masahiro Yamada [Fri, 30 May 2014 08:45:03 +0000 (17:45 +0900)]
powerpc: debris: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>
10 years agopowerpc: kvme080: remove orphan board
Masahiro Yamada [Fri, 30 May 2014 08:45:02 +0000 (17:45 +0900)]
powerpc: kvme080: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>
10 years agopowerpc: ep8248: remove orphan board
Masahiro Yamada [Fri, 30 May 2014 08:45:01 +0000 (17:45 +0900)]
powerpc: ep8248: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>
10 years agopowerpc: ispan: remove orphan board
Masahiro Yamada [Fri, 30 May 2014 08:45:00 +0000 (17:45 +0900)]
powerpc: ispan: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>
10 years agopowerpc: rattler: remove orphan board
Masahiro Yamada [Fri, 30 May 2014 08:44:59 +0000 (17:44 +0900)]
powerpc: rattler: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>
10 years agopowerpc: zpc1900: remove orphan board
Masahiro Yamada [Fri, 30 May 2014 08:44:58 +0000 (17:44 +0900)]
powerpc: zpc1900: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>
10 years agopowerpc: mpc8260ads: remove orphan board
Masahiro Yamada [Fri, 30 May 2014 08:44:57 +0000 (17:44 +0900)]
powerpc: mpc8260ads: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>
10 years agopowerpc: adder: remove orphan board
Masahiro Yamada [Fri, 30 May 2014 08:44:56 +0000 (17:44 +0900)]
powerpc: adder: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC8xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>
10 years agoPPC4xx: Remove quad100hd board
Wolfgang Denk [Thu, 29 May 2014 09:54:06 +0000 (11:54 +0200)]
PPC4xx: Remove quad100hd board

The quad100hd has been unmaintained and dead ever since it's been
added some 6 years ago.  Remove it.

Also update README.scrapyard and insert some commit IDs for removed
boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Gary Jennejohn <gljennjohn@googlemail.com>
10 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Tom Rini [Fri, 30 May 2014 15:34:39 +0000 (11:34 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

10 years agomain: Avoid unncessary strdup()/free()
Simon Glass [Fri, 11 Apr 2014 02:01:36 +0000 (20:01 -0600)]
main: Avoid unncessary strdup()/free()

It doesn't seem necessary to use memory allocation in this code. The setenv()
will make a copy anyway.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agomain: Make the execution path a little clearer in main.c
Simon Glass [Fri, 11 Apr 2014 02:01:35 +0000 (20:01 -0600)]
main: Make the execution path a little clearer in main.c

bootdelay_process() never returns in some circumstances, whichs makes the
control flow confusing. Change it so that the decision about how to execute
the boot command is made in the main_loop() code, so it is easier to follow.
Move CLI stuff to cli.c.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agomain: Hide the hush/simple details inside cli.c
Simon Glass [Fri, 11 Apr 2014 02:01:34 +0000 (20:01 -0600)]
main: Hide the hush/simple details inside cli.c

Move these details from main (which doesn't care which parser is used) to
cli.c where they belong.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoSimplify the main loop
Simon Glass [Fri, 11 Apr 2014 02:01:33 +0000 (20:01 -0600)]
Simplify the main loop

The main loop is easier to follow if the code is grouped into separate
functions. Make this change, so that main_loop() is easier to read.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agom68k: powerpc: Clean up do_mdm_init
Simon Glass [Fri, 11 Apr 2014 02:01:32 +0000 (20:01 -0600)]
m68k: powerpc: Clean up do_mdm_init

This code seems unnecessarily complex. We really just need to check the
global_data. Now that is it all in one place, and not arch-specific, this
is pretty easy.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoRename bootretry functions and remove #ifdefs
Simon Glass [Fri, 11 Apr 2014 02:01:31 +0000 (20:01 -0600)]
Rename bootretry functions and remove #ifdefs

Add a bootretry_ prefix to these two functions, and remove the need for
the #ifdef around everything (it moves to the Makefile).

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoMove bootretry code into bootretry.c and clean up
Simon Glass [Fri, 11 Apr 2014 02:01:30 +0000 (20:01 -0600)]
Move bootretry code into bootretry.c and clean up

This code is only used by one board, so it seems a shame to clutter up
the readline code with it. Move it into its own file.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoMove command line API into cli.c
Simon Glass [Fri, 11 Apr 2014 02:01:29 +0000 (20:01 -0600)]
Move command line API into cli.c

We now have a single entry point to the CLI, whether simple or hush. Put
this in its own file.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoMove autoboot code to autoboot.c
Simon Glass [Fri, 11 Apr 2014 02:01:28 +0000 (20:01 -0600)]
Move autoboot code to autoboot.c

The autoboot code is complex and long. It deserves its own file with
a simple interface from main.c.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoAdd cli_ prefix to readline functions
Simon Glass [Fri, 11 Apr 2014 02:01:27 +0000 (20:01 -0600)]
Add cli_ prefix to readline functions

This makes it clear where the code resides.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoSplit out simple parser and readline into separate files
Simon Glass [Fri, 11 Apr 2014 02:01:26 +0000 (20:01 -0600)]
Split out simple parser and readline into separate files

It doesn't make sense to have the simple parser and the readline code
all in main. Split them out into separate files.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agomove CLI prototypes to cli.h and add comments
Simon Glass [Fri, 11 Apr 2014 02:01:25 +0000 (20:01 -0600)]
move CLI prototypes to cli.h and add comments

Move the CLI prototypes from common.h to cli.h as part of an effort to
reduce the size of common.h.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoRename hush to cli_hush
Simon Glass [Fri, 11 Apr 2014 02:01:24 +0000 (20:01 -0600)]
Rename hush to cli_hush

Hush is a command-line interpreter, so rename it to make that clearer.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoRemove unnecessary use of hush header file
Simon Glass [Fri, 11 Apr 2014 02:01:23 +0000 (20:01 -0600)]
Remove unnecessary use of hush header file

Some files include hush.h but don't actually use it. Remove this where
possible.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoMerge branch 'master' of git://git.denx.de/u-boot-arc
Tom Rini [Tue, 27 May 2014 15:44:19 +0000 (11:44 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-arc

10 years agotb100 - add Abilis TB100 board
Alexey Brodkin [Wed, 21 May 2014 10:39:32 +0000 (14:39 +0400)]
tb100 - add Abilis TB100 board

Development board for headless gateway platform from Abilis Systems.
Initial commit with working UART and DW GMAC.

For now with generic Ethernet PHY due to problems in Realtek PHY driver.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com>
10 years agoPrepare v2014.07-rc2 v2014.07-rc2
Tom Rini [Tue, 27 May 2014 14:22:07 +0000 (10:22 -0400)]
Prepare v2014.07-rc2

Signed-off-by: Tom Rini <trini@ti.com>
10 years agodm: rename device struct to udevice
Heiko Schocher [Thu, 22 May 2014 10:43:05 +0000 (12:43 +0200)]
dm: rename device struct to udevice

using UBI and DM together leads in compiler error, as
both define a "struct device", so rename "struct device"
in include/dm/device.h to "struct udevice", as we use
linux code (MTD/UBI/UBIFS some USB code,...) and cannot
change the linux "struct device"

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Marek Vasut <marex@denx.de>
10 years agoARM: at91sam9m10g45ek: add mmc environment configuration support
Wu, Josh [Wed, 21 May 2014 02:42:16 +0000 (10:42 +0800)]
ARM: at91sam9m10g45ek: add mmc environment configuration support

In this configuration the environment will save in file: uboot.env of
mmc card.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoARM: at91sam9m10g45ek: enable mci0 support
Wu, Josh [Wed, 21 May 2014 02:42:15 +0000 (10:42 +0800)]
ARM: at91sam9m10g45ek: enable mci0 support

Also we enable the mmc command in configuration file.

As both CONFIG_CMD_MMC and CONFIG_CMD_USB use the CONFIG_DOS_PARTITION,
so remove the redundant CONFIG_DOS_PARTITION definition.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoARM: at91: remove redundant ARM926EJS definition in board config files
Wu, Josh [Tue, 20 May 2014 09:44:45 +0000 (17:44 +0800)]
ARM: at91: remove redundant ARM926EJS definition in board config files

As at91 board config file will include the SoC header, so we can remove
the ARM926EJS definition in board config files.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoat91: remove redundant AT91FAMILY definition in board config file
Wu, Josh [Tue, 20 May 2014 09:44:44 +0000 (17:44 +0800)]
at91: remove redundant AT91FAMILY definition in board config file

Now the AT91FAMILY is already defined in the at91 SoC header. The at91
board config file will include the SoC header file.

So we can remove the redundant AT91FAMILY definition in at91 board
config files.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
[rebase patch]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoARM: at91sam9x5: define the AT91FAMILY and ARM926EJS in SoC header
Wu, Josh [Tue, 20 May 2014 09:44:43 +0000 (17:44 +0800)]
ARM: at91sam9x5: define the AT91FAMILY and ARM926EJS in SoC header

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoARM: at91: remove AT91X40 macro since it is not use any more
Wu, Josh [Tue, 20 May 2014 09:27:28 +0000 (17:27 +0800)]
ARM: at91: remove AT91X40 macro since it is not use any more

The at91x40.h is not exist. So we remove it.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agosama5d3xek: enable PMECC header generation
Andreas Bießmann [Mon, 19 May 2014 12:23:41 +0000 (14:23 +0200)]
sama5d3xek: enable PMECC header generation

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
10 years agoarm:at91: enable ROM loadable atmel image
Andreas Bießmann [Mon, 19 May 2014 12:23:40 +0000 (14:23 +0200)]
arm:at91: enable ROM loadable atmel image

For sama5d3xek we need to modify the SPL image for correct detection by ROM
code.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
10 years agomkimage: add atmelimage
Andreas Bießmann [Mon, 19 May 2014 12:23:39 +0000 (14:23 +0200)]
mkimage: add atmelimage

The new atmelimage converts a machine code BLOB to bootable ROM image. Atmel
ROM has no sophisticated image format, it only checks the first 7 ARM vectors.
The vectors can contain valid B or LDR opcodes, the 6'th vector contains the
image size to load.

Additionally the PMECC header can be written by the atmelimage target. The
parameters must be given via the -n switch as a coma separated list. For
example:

mkimage -T atmelimage \
 -n usePmecc=1,sectorPerPage=4,sectorSize=512,spareSize=64,eccBits=4,eccOffset=36 \
 -d spl/u-boot-spl.bin boot.bin

A provided image can be checked for correct header setup. It prints out the
PMECC header parameters if it has one and the 6'th interrupt vector content.

---8<---
Image Type: ATMEL ROM-Boot Image with PMECC Header
PMECC header
====================
eccOffset:        36
sectorSize:      512
eccBitReq:         4
spareSize:        64
nbSectorPerPage:   4
usePmecc:          1
====================
6'th vector has 17044 set
--->8---

A SPL binary modified with the atmelimage mkimage target was succesfully
booted on a sama5d34ek via MMC and NAND.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Heiko Schocher <hs@denx.de>
Tested-by: Bo Shen <voice.shen@atmel.com>
10 years agocorvus: remove unneeded CONFIG_AT91_LEGACY
Andreas Bießmann [Fri, 16 May 2014 08:51:05 +0000 (10:51 +0200)]
corvus: remove unneeded CONFIG_AT91_LEGACY

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Heiko Schocher <hs@denx.de>
10 years agommc: atmel_mci: fix print incorrect buffer content for debug
Wu, Josh [Wed, 7 May 2014 09:06:08 +0000 (17:06 +0800)]
mmc: atmel_mci: fix print incorrect buffer content for debug

Signed-off-by: Josh Wu <josh.wu@atmel.com>
[fix checkpatch line length warning]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agogpio: at91: add sanity check for the NULL pointer
Wu, Josh [Wed, 7 May 2014 08:50:45 +0000 (16:50 +0800)]
gpio: at91: add sanity check for the NULL pointer

We need check the NULL pointer as at91_pio_get_port() may return NULL.

Also print a error message when at91_pio_get_port() failed otherwise we
cannot notice the failure.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoARM: atmel: at91sam9x5ek: convert to generic board
Bo Shen [Thu, 24 Apr 2014 03:42:16 +0000 (11:42 +0800)]
ARM: atmel: at91sam9x5ek: convert to generic board

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following
warning on boot:

"Warning: Your board does not use generic board. Please read
doc/README.generic-board and take action. Boards not
upgraded by the late 2014 may break or be removed."

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoARM: atmel: at91sam9m10g45ek: convert to generic board
Bo Shen [Thu, 24 Apr 2014 03:42:15 +0000 (11:42 +0800)]
ARM: atmel: at91sam9m10g45ek: convert to generic board

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following
warning on boot:

"Warning: Your board does not use generic board. Please read
doc/README.generic-board and take action. Boards not
upgraded by the late 2014 may break or be removed."

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoARM: atmel: sama5d3_xplained: convert to generic board
Bo Shen [Thu, 24 Apr 2014 03:42:14 +0000 (11:42 +0800)]
ARM: atmel: sama5d3_xplained: convert to generic board

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following
warning on boot:

"Warning: Your board does not use generic board. Please read
doc/README.generic-board and take action. Boards not
upgraded by the late 2014 may break or be removed."

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoARM: atmel: sama5d3xek: convert to generic board
Bo Shen [Thu, 24 Apr 2014 03:42:13 +0000 (11:42 +0800)]
ARM: atmel: sama5d3xek: convert to generic board

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following
warning on boot:

"Warning: Your board does not use generic board. Please read
doc/README.generic-board and take action. Boards not
upgraded by the late 2014 may break or be removed."

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoARM: atmel: enable SPL on sama5d3_xplained board
Bo Shen [Wed, 19 Mar 2014 06:48:45 +0000 (14:48 +0800)]
ARM: atmel: enable SPL on sama5d3_xplained board

It supports boot from NAND and SD/MMC card.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoARM: atmel: switch to main crystal osc for SPL boot
Bo Shen [Wed, 19 Mar 2014 06:48:44 +0000 (14:48 +0800)]
ARM: atmel: switch to main crystal osc for SPL boot

If without switch to main crystal oscillator, the sama5d3 SoC will
use internal on chip RC oscillator.
In order to get better accuracy, switch to main crystal oscillator.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoatngw100mkii: add missing CONFIG_SYS_TEXT_BASE
Andreas Bießmann [Fri, 16 May 2014 10:17:41 +0000 (12:17 +0200)]
atngw100mkii: add missing CONFIG_SYS_TEXT_BASE

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agonet/designware: Make DMA burst length configurable and reduce by default
Ian Campbell [Thu, 8 May 2014 21:26:35 +0000 (22:26 +0100)]
net/designware: Make DMA burst length configurable and reduce by default

The correct value for this setting can vary across SoCs and boards, so make it
configurable.

Also reduce the default value to 8, which is the same default as used in the
Linux driver.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
10 years agonet/designware: reorder struct dw_eth_dev to pack more efficiently.
Ian Campbell [Wed, 14 May 2014 18:30:29 +0000 (19:30 +0100)]
net/designware: reorder struct dw_eth_dev to pack more efficiently.

On Thu, 2014-05-08 at 22:26 +0100, Ian Campbell wrote:
> The {r,t}xbuffs fields also need to be aligned. Previously this was done
> implicitly because they immediately followed the descriptor tables. Make this
> explicit and also move to the head of the struct.

Looks like I managed to not actually commit the move of the field to the
head of the struct! v3.1 follows....

Ian.

8<------------

>From 2937ba01841887317f6792709ed57cb86b5fc0cd Mon Sep 17 00:00:00 2001
From: Ian Campbell <ijc@hellion.org.uk>
Date: Thu, 1 May 2014 19:45:15 +0100
Subject: [PATCH] net/designware: reorder struct dw_eth_dev to pack more
 efficiently.

The {tx,rx}_mac_descrtable fields are aligned to ARCH_DMA_MINALIGN, which could
be 256 or even larger. That means there is a potentially huge hole in the
struct before those fields, so move them to the front where they are better
packed.

Moving them to the front also helps ensure that so long as dw_eth_dev is
properly aligned (which it is since "net/designware: ensure device private data
is DMA aligned.") the {tx,rx}_mac_descrtable will be too, or at least avoids
having to worry too much about compiler specifics.

The {r,t}xbuffs fields also need to be aligned. Previously this was done
implicitly because they immediately followed the descriptor tables. Make this
explicit and also move to the head of the struct.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Reviewed-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
10 years agonet/designware: ensure cache invalidations are aligned to ARCH_DMA_MINALIGN
Ian Campbell [Thu, 8 May 2014 21:26:33 +0000 (22:26 +0100)]
net/designware: ensure cache invalidations are aligned to ARCH_DMA_MINALIGN

This is required at least on ARM.

When sending instead of simply invalidating the entire descriptor, flush
as little as possible while still respecting ARCH_DMA_MINALIGN, as
requested by Alexey.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
10 years agonet/designware: ensure device private data is DMA aligned.
Ian Campbell [Thu, 8 May 2014 21:26:32 +0000 (22:26 +0100)]
net/designware: ensure device private data is DMA aligned.

struct dw_eth_dev contains fields which are accessed via DMA, so make sure it
is aligned to a dma boundary. Without this I see:
    ERROR: v7_dcache_inval_range - start address is not aligned - 0x7fb677e0

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Marek Vasut <marex@denx.de>
10 years agosunxi: non-FEL SPL boot support for sun7i
Ian Campbell [Mon, 5 May 2014 10:52:30 +0000 (11:52 +0100)]
sunxi: non-FEL SPL boot support for sun7i

Add support for booting from an MMC card.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Henrik Nordström <henrik@henriknordstrom.net>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Tom Cubie <Mr.hipboi@gmail.com>
Reviewed-by: Tom Rini <trini@ti.com>
10 years agosunxi: mmc support
Ian Campbell [Mon, 5 May 2014 13:42:31 +0000 (14:42 +0100)]
sunxi: mmc support

On Mon, 2014-05-05 at 14:18 +0200, Stefan Roese wrote:
> > + case 1:
> > +#if CONFIG_MMC1_PG

> Are you sure that this is correct and shouldn't be:
>
> +#ifdef CONFIG_MMC1_PG
>
> ?

It's "correct" in so far as it works (the boards.cfg config stuff
#defines things to 1), but I think you are right that it isn't the
preferred style. But...

> A quick scan through this patch series shows that this define
> is not set at all. Perhaps its outdated? Or is it used to support
> some other sunxi SoC? Not sure, perhaps it should be removed for
> now.

...I had thought that it was to support some other board which wasn't
being upstreamed right now, so eventually useful and harmless for now,
but I've just checked and it isn't actually used by any of the boards in
u-boot-sunxi.git. So rather than fix it to use #ifdef lets drop it.
Rather than resend the entire series, here is v5.1 of this patch.

> Other than this please add my:
>
> Reviewed-by: Stefan Roese <sr@denx.de>

Thanks!

8<---------------------------------

>From 20704e35a41664de5f516ed0e02981ac06085102 Mon Sep 17 00:00:00 2001
From: Ian Campbell <ijc@hellion.org.uk>
Date: Fri, 7 Mar 2014 04:29:39 +0000
Subject: [PATCH v5.1 7/8] sunxi: mmc support

This adds support for the MMC controller on the Allwinner A20 (sun7i)
processor.

Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
Signed-off-by: Luke Leighton <lkcl@lkcl.net>
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Wills Wang <wills.wang.open@gmail.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Tom Cubie <Mr.hipboi@gmail.com>
Cc: Aaron Maoye <leafy.myeh@allwinnertech.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Reviewed-by: Tom Rini <trini@ti.com>
10 years agosunxi: add gmac Ethernet support
Ian Campbell [Mon, 5 May 2014 10:52:28 +0000 (11:52 +0100)]
sunxi: add gmac Ethernet support

Add support for the GMAC Ethernet controller on Allwinner A20 (sun7i)
processors. Enable for the Cubietruck.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jens Kuske <jenskuske@gmail.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
10 years agosunxi: add support for Cubietruck booting in FEL mode
Ian Campbell [Mon, 5 May 2014 10:52:27 +0000 (11:52 +0100)]
sunxi: add support for Cubietruck booting in FEL mode

Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Jens Kuske <jenskuske@gmail.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Tom Rini <trini@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
10 years agosunxi: add sun7i cpu, board and start of day support
Ian Campbell [Mon, 5 May 2014 10:52:26 +0000 (11:52 +0100)]
sunxi: add sun7i cpu, board and start of day support

This patch adds generic board, start of day and basic build system support for
the Allwinner A20 (sun7i) processor. This code will not been compiled until the
build is hooked up in a later patch. It has been split out to keep the patches
manageable.

Signed-off-by: Adam Sampson <ats@offog.org>
Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
Signed-off-by: Jens Kuske <jenskuske@gmail.com>
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Signed-off-by: Luke Leighton <lkcl@lkcl.net>
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Patrick Wood <patrickhwood@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wills Wang <wills.wang.open@gmail.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Tom Cubie <Mr.hipboi@gmail.com>
Reviewed-by: Tom Rini <trini@ti.com>
10 years agosunxi: add sun7i dram setup support
Ian Campbell [Mon, 5 May 2014 10:52:25 +0000 (11:52 +0100)]
sunxi: add sun7i dram setup support

This patch adds DRAM initialisation support for the Allwinner A20 (sun7i)
processor. This code will not been compiled until the build is hooked up in a
later patch. It has been split out to keep the patches manageable.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
Signed-off-by: Jens Kuske <jenskuske@gmail.com>
Signed-off-by: Luke Leighton <lkcl@lkcl.net>
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Tom Cubie <Mr.hipboi@gmail.com>
Reviewed-by: Tom Rini <trini@ti.com>
10 years agosunxi: add sun7i pinmux and gpio support
Ian Campbell [Mon, 5 May 2014 10:52:24 +0000 (11:52 +0100)]
sunxi: add sun7i pinmux and gpio support

This patch adds the basic pinmux and gpio support for the Allwinner A20 (sun7i)
processor. This code will not been compiled until the build is hooked up in a
later patch. It has been split out to keep the patches manageable.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ma Haijun <mahaijuns@gmail.com>
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Henrik Nordström <henrik@henriknordstrom.net>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Tom Rini <trini@ti.com>
Acked-by: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Tom Cubie <Mr.hipboi@gmail.com>
Reviewed-by: Tom Rini <trini@ti.com>
10 years agosunxi: add sun7i clocks and timer support.
Ian Campbell [Mon, 5 May 2014 10:52:23 +0000 (11:52 +0100)]
sunxi: add sun7i clocks and timer support.

This patch adds the basic clocks and timer support for the Allwinner A20
(sun7i) processor. This code will not been compiled until the build is hooked
up in a later patch. It has been split out to keep the patches manageable.

Some of the code here is common to multiple sunxi subarchtectures, hence files
are named sun4i which is the earliest similar variant.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
Signed-off-by: Jens Kuske <jenskuske@gmail.com>
Signed-off-by: Luke Leighton <lkcl@lkcl.net>
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Stefan Roese <sr@denx.de>
Cc: Tom Cubie <Mr.hipboi@gmail.com>
Reviewed-by: Tom Rini <trini@ti.com>
10 years agoboards.cfg: update highbank maintainer email
Rob Herring [Wed, 23 Apr 2014 16:34:40 +0000 (11:34 -0500)]
boards.cfg: update highbank maintainer email

My Calxeda email is gone, so update my email address.

Signed-off-by: Rob Herring <robh@kernel.org>
10 years agoarm: vf610: add DDR_SEL_PAD_CONTR register
Stefan Agner [Wed, 23 Apr 2014 16:17:51 +0000 (18:17 +0200)]
arm: vf610: add DDR_SEL_PAD_CONTR register

Set DDR_SEL_PAD_CONTR register explicitly to DDR3 which solves RAM
issues with newer silicon (1.1). This register was added in revision
4 of the Vybrid Reference Manual.

Signed-off-by: Stefan Agner <stefan@agner.ch>
10 years agoArm64 fix a bug of vbar_el3 initialization
David Feng [Sat, 19 Apr 2014 01:45:21 +0000 (09:45 +0800)]
Arm64 fix a bug of vbar_el3 initialization

Signed-off-by: David Feng <fenghua@phytium.com.cn>
10 years agoARM: highbank: convert to generic board
Rob Herring [Fri, 11 Apr 2014 20:09:44 +0000 (15:09 -0500)]
ARM: highbank: convert to generic board

Enable CONFIG_SYS_GENERIC_BOARD on highbank.

Signed-off-by: Rob Herring <robh@kernel.org>
10 years agolsxl: rework boot scripts
Michael Walle [Tue, 1 Apr 2014 18:09:14 +0000 (20:09 +0200)]
lsxl: rework boot scripts

Move addresses for kernel, ramdisk and fdt blob to own variables. Add dtb
blob loading to all existing boot scripts, dtb filenames were taken from
vanilla kernel. Introduce new boot script bootcmd_legacy, which only loads
a kernel and a ramdisk. Make this the default boot script. This should also
restore the behaviour of the original bootloader.

Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Michael Walle <michael@walle.cc>
10 years agolsxl: use 64bit for LBA48 to support 4 TB drives
Michael Walle [Tue, 1 Apr 2014 18:09:13 +0000 (20:09 +0200)]
lsxl: use 64bit for LBA48 to support 4 TB drives

Cc: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Michael Walle <michael@walle.cc>
10 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Tom Rini [Sat, 24 May 2014 10:34:08 +0000 (06:34 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-arm