Marek Vasut [Mon, 28 May 2018 15:22:47 +0000 (17:22 +0200)]
ddr: altera: Add ECC DRAM scrubbing support for Arria10
The SDRAM must first be rewritten by zeroes if ECC is used to initialize
the ECC metadata. Make the CPU overwrite the DRAM with zeroes in such a
case. This scrubbing implementation turns the caches on temporarily, then
overwrites the whole RAM with zeroes, flushes the caches and turns them
off again. This provides satisfactory performance.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
Marek Vasut [Tue, 29 May 2018 16:04:15 +0000 (18:04 +0200)]
ddr: altera: Drop custom dram_bank_mmu_setup() on Arria10
This function was never used in SPL and the default implementation of
dram_bank_mmu_setup() does the same thing. The only difference is the
part which configures OCRAM as cachable, which doesn't really work as
it covers more than the OCRAM.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
Ley Foon Tan [Fri, 1 Jun 2018 08:13:19 +0000 (16:13 +0800)]
arm: socfpga: Add do_bridge_reset for Arria 10
Add do_bridge_reset() function for Arria 10, it is required by misc.c.
arch/arm/mach-socfpga/built-in.o: In function `do_bridge':
arch/arm/mach-socfpga/misc.c:221: undefined reference to `do_bridge_reset'
make[1]: *** [u-boot] Error 1
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Ley Foon Tan [Wed, 23 May 2018 16:17:27 +0000 (00:17 +0800)]
arm: socfpga: Restructure the SPL file
Restructure the SPL so each devices such as CV, A10 and S10
will have their own dedicated SPL file. SPL file determine
the HW initialization flow which is device specific
Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Ley Foon Tan [Fri, 1 Jun 2018 08:52:20 +0000 (16:52 +0800)]
spi: cadence_qspi: Fix warning cast from pointer to integer of different size
Use "%p" to print cmdbuf.
Compilation warning as below:
CC spl/drivers/spi/cadence_qspi_apb.o
LD spl/lib/built-in.o
drivers/spi/cadence_qspi_apb.c: In function ‘cadence_qspi_apb_indirect_write_setup’:
drivers/spi/cadence_qspi_apb.c:696:18: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
cmdlen, (unsigned int)cmdbuf);
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Marek Vasut <marex@denx.de>
In file included from include/linux/bug.h:7:0,
from include/common.h:26,
from drivers/spi/cadence_qspi.c:8:
drivers/spi/cadence_qspi.c: In function ‘cadence_spi_xfer’:
drivers/spi/cadence_qspi.c:211:8: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t {aka long unsigned int}’ [-Wformat=]
debug("%s: len=%d [bytes]\n", __func__, data_bytes);
^
include/linux/printk.h:37:21: note: in definition of macro ‘pr_fmt’
#define pr_fmt(fmt) fmt
^~~
include/log.h:142:2: note: in expansion of macro ‘debug_cond’
debug_cond(_DEBUG, fmt, ##args)
^~~~~~~~~~
drivers/spi/cadence_qspi.c:211:2: note: in expansion of macro ‘debug’
debug("%s: len=%d [bytes]\n", __func__, data_bytes);
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Marek Vasut <marex@denx.de>
Philippe Reynes [Fri, 22 Jun 2018 16:52:05 +0000 (18:52 +0200)]
cpu: bmips: fix probe to get the address
In the device tree, the address for cpu is located in
the node "cpus", not in the cpu node (for exemple cpu@0).
So when probing cpu, the cpu address must be read in the
cpu parent.
The commit "cpu: bmips: convert to use live dt"
(sha1: c444afbbefa103d567f197393d39ec0fcca21a0c)
change this behaviour and read the address in the
cpu node when probing cpu.
We fix this by reading the address in the cpu parent.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
MIPS: add MIPS Release 6 build coverage for Boston boards
Now that Travis CI is building with gcc-7.3.0, we can add
build coverage for all combinations of MIPS Release 6
instruction sets (MIPS32, MIPS64, Big Endian, Little Endian).
Add mew default configs for Boston board for all MIPS Release 6
variants.
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Baruch Siach [Thu, 21 Jun 2018 06:03:00 +0000 (09:03 +0300)]
Makefile: drop mention of *.cfgtmp
Since commit f916757300 (imx: Create distinct pre-processed mkimage
config files), *.cfgtmp files are no longer generated. There is no need
to remove them on the 'clean' target anymore.
Alex Kiernan [Wed, 20 Jun 2018 20:10:52 +0000 (20:10 +0000)]
mkimage: fit_image: Add support for SOURCE_DATE_EPOCH in signatures
When generating timestamps in signatures, use imagetool_get_source_date()
so we can be overridden by SOURCE_DATE_EPOCH to generate reproducible
images.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromum.org>
Alex Kiernan [Wed, 20 Jun 2018 20:10:51 +0000 (20:10 +0000)]
mkimage: Refactor imagetool_get_source_date to take command name
So we can use imagetool_get_source_date() from callers who do not have
the image tool params struct, just pass in the command name for the error
message.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromum.org>
Baruch Siach [Mon, 18 Jun 2018 04:59:25 +0000 (07:59 +0300)]
Makefile: drop unused cpp_cfg macro
Commit e19b0fb4851f (kbuild: generate u-boot.cfg as a byproduct of
include/autoconf.mk) removed the use of the cpp_cfg macro in Makefile,
but forgot to remove its definition.
Adam Ford [Sun, 10 Jun 2018 14:29:51 +0000 (09:29 -0500)]
gpio: omap_gpio: Convert to auto-alloc feature when DT is supported
The omap_gpio driver has a TODO that says when every board is converted
to DM and DT, the omap_gpio_bind can stop using calloc and switch
to auto-alloc.
This patch converts this driver to auto-calloc when DT is enabled.
Teddy Reed [Sat, 9 Jun 2018 15:45:20 +0000 (11:45 -0400)]
vboot: Do not use hashed-strings offset
The hashed-strings signature property includes two uint32_t values.
The first is unneeded as there should never be a start offset into the
strings region. The second, the size, is needed because the added
signature node appends to this region.
See tools/image-host.c, where a static 0 value is used for the offset.
Signed-off-by: Teddy Reed <teddy.reed@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Teddy Reed [Sat, 9 Jun 2018 15:38:05 +0000 (11:38 -0400)]
vboot: Add FIT_SIGNATURE_MAX_SIZE protection
This adds a new config value FIT_SIGNATURE_MAX_SIZE, which controls the
max size of a FIT header's totalsize field. The field is checked before
signature checks are applied to protect from reading past the intended
FIT regions.
This field is not part of the vboot signature so it should be sanity
checked. If the field is corrupted then the structure or string region
reads may have unintended behavior, such as reading from device memory.
A default value of 256MB is set and intended to support most max storage
sizes.
Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Teddy Reed <teddy.reed@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Add support for loading U-Boot on the Broadcom 7445 SoC. This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader, and U-Boot is acting as the third stage bootloader, loaded
as an ELF program by BOLT.
Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Florian Fainelli <f.fainelli@gmail.com>
Ben Whitten [Thu, 7 Jun 2018 10:37:27 +0000 (11:37 +0100)]
spl: fit: verify images prior to post processing
Verification of hashes needs to take place before any image post
processing, thus matching full FIT image processing.
This allows mechanisms such as encryption be applied to images
prior to fit generation at the spl level.
Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Marek Vasut [Fri, 1 Jun 2018 21:19:29 +0000 (23:19 +0200)]
spl: fit: Fix support for loading FPGA bitstream
Move the FPGA loading from IS_ENABLED(CONFIG_SPL_OS_BOOT) &&
IS_ENABLED(CONFIG_SPL_GZIP) conditional. The FPGA loading can
be used without OS loading and GZIP support in SPL. This issue
was most likely induced by some merge conflict, so fix it.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
Marek Vasut [Thu, 31 May 2018 15:59:29 +0000 (17:59 +0200)]
spl: spi: Support full fitImage handling
Handle the case where the full fitImage support is enabled. In this
case, the whole fitImage must be loaded up front as some parts of the
fitImage code require memory-mapped access to the entire fitImage.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Simon Glass <sjg@chromium.org>
Marek Vasut [Thu, 31 May 2018 15:59:19 +0000 (17:59 +0200)]
spl: fat: Support full fitImage handling
Handle the case where the full fitImage support is enabled. In this
case, the whole fitImage must be loaded up front as some parts of the
fitImage code require memory-mapped access to the entire fitImage.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Simon Glass <sjg@chromium.org>
Marek Vasut [Thu, 31 May 2018 15:59:07 +0000 (17:59 +0200)]
fit: Verify all configuration signatures
Rather than verifying configuration signature of the configuration node
containing the kernel image types, verify all configuration nodes, even
those that do not contain kernel images. This is useful when the nodes
contain ie. standalone OSes or U-Boot.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Paul Burton [Thu, 14 Sep 2017 21:34:50 +0000 (14:34 -0700)]
test/py: vboot: Remove stderr redirect from openssl command
The openssl command specified in test_with_algo() ultimately ends up
being run by RunAndLog::run(), which uses it to construct a Popen object
with the default shell=False. The stderr redirect in the command is
therefore simply passed to openssl as an argument. With at least openssl
1.1.0f this causes openssl, and therefore test_vboot, to fail with:
genpkey: Use -help for summary.
Exit code: 1
Any stderr output ought to be captured & stored in the RunAndLog
object's output field and returned from run() via run_and_log() to
test_with_algo() which then ignores it anyway, so we can drop the
shell-like redirection with no ill effects. With this fix test_vboot now
passes for me.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
Paul Burton [Thu, 14 Sep 2017 21:34:49 +0000 (14:34 -0700)]
test/py: hush_if_test: Use open() in place of file()
In python 3.x the file() function has been removed. Use open() instead,
which works on both python 2.x & 3.x, and is described as the preferred
method of opening a file by python 2.x documentation anyway.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
Paul Burton [Thu, 14 Sep 2017 21:34:48 +0000 (14:34 -0700)]
test/py: fit: Open files as binary files
The read_file() function in test_fit is used with files that are not
text files, as well as some that are. It is never used in a way that
requires it to decode text files to characters, so open all files in
binary mode such that read() doesn't attempt to decode characters for
files which are not text files.
Without this test_fit fails on python 3.x when reading an FDT in
run_fit_test() with:
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xd0 in position
0: invalid continuation byte
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
Paul Burton [Thu, 14 Sep 2017 21:34:45 +0000 (14:34 -0700)]
test/py: Import 'configparser' lower case to be python 3.x safe
In python 3.x the configparser module is named with all lower case.
Import it as such in order to avoid errors when running on python 3.x,
and fall back to the CamelCase version in order to keep working with
python 2.x.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
Paul Burton [Thu, 14 Sep 2017 21:34:44 +0000 (14:34 -0700)]
test/py: Use range() rather than xrange()
In python 3.x the xrange() function has been removed, and range()
returns an iterator much like Python 2.x's xrange(). Simply use range()
in place of xrange() in order to work on both python 2.x & 3.x. This
will mean a small cost on python 2.x since range() will return a list
there rather than an iterator, but the cost should be negligible.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
Paul Burton [Thu, 14 Sep 2017 21:34:43 +0000 (14:34 -0700)]
test/py: Make print statements python 3.x safe
In python 3.x print must be called as a function rather than used as a
statement. Update uses of print to the function call syntax in order to
be python 3.x safe.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
Ley Foon Tan [Thu, 14 Jun 2018 10:45:23 +0000 (18:45 +0800)]
net: designware: Add reset ctrl to driver
Add code to reset all reset signals as in Ethernet DT node. A reset
property is an optional feature, so only print out a warning and do not
fail if a reset property is not present.
If a reset property is discovered, then use it to deassert, thus
bringing the IP out of reset.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Ley Foon Tan [Thu, 14 Jun 2018 10:45:21 +0000 (18:45 +0800)]
mmc: dwmmc: socfpga: Add reset ctrl to driver
Add code to reset all reset signals as in mmc DT node. A reset property
is an optional feature, so only print out a warning and do not fail if a
reset property is not present.
If a reset property is discovered, then use it to deassert, thus
bringing the IP out of reset.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
This commit adds Actions Semi OWL family base clock and S900 SoC
specific clock support. For S900 peripheral clock support, only UART
clock has been added for now.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 6 Jul 2018 16:27:42 +0000 (10:27 -0600)]
binman: Support updating the device tree with calc'd info
It is useful to write the position and size of each entry back to the
device tree so that U-Boot can access this at runtime. Add a feature to
support this, along with associated tests.
Simon Glass [Fri, 6 Jul 2018 16:27:41 +0000 (10:27 -0600)]
binman: Add a SetCalculatedProperties() method
Once binman has packed the image, the position and size of each entry is
known. It is then possible for binman to update the device tree with these
positions. Since placeholder values have been added, this does not affect
the size of the device tree and therefore the packing does not need to be
performed again.
Add a new SetCalculatedProperties method to handle this.
Simon Glass [Fri, 6 Jul 2018 16:27:40 +0000 (10:27 -0600)]
binman: Add a ProcessFdt() method
Some entry types modify the device tree, e.g. to remove microcode or add a
property. So far this just modifies their local copy and does not affect
a 'shared' device tree.
Rather than doing this modification in the ObtainContents() method, and a
new ProcessFdt() method which is specifically designed to modify this
shared device tree.
Move the existing device-tree code over to use this method, reducing
ObtainContents() to the goal of just obtaining the contents without any
processing, even for device tree.
Simon Glass [Fri, 6 Jul 2018 16:27:30 +0000 (10:27 -0600)]
dtoc: Fix Fdt.GetNode() to handle a missing node
At present the algortihm is not correct since it will return the root node
if the requested node is not found and there are no slashes in the
requested node name. Fix this and add a test.
Simon Glass [Fri, 6 Jul 2018 16:27:29 +0000 (10:27 -0600)]
dtoc: Keep track of property offsets
At present the Fdt class does not keep track of property offsets if they
change due to removal of properties. Update the code to handle this, and
add a test.
Simon Glass [Fri, 6 Jul 2018 16:27:28 +0000 (10:27 -0600)]
dtoc: Update fdt tests to increase code coverage
At present only some of the fdt functionality is tested. Add more tests to
cover the rest of it. Also turn on test coverage, which is now 100% with
a small exclusion for a Python 3 feature.
Simon Glass [Fri, 6 Jul 2018 16:27:27 +0000 (10:27 -0600)]
dtoc: Drop use of a local dtb buffer
At present the Fdt class has its own copy of the device tree. This is
confusing an unnecessary now that pylibfdt has its own. Drop it and
provide access functions to the buffer.
This allows us to move the rest of the implementation to use pylibfdt
methods instead of directly calling libfdt stubs.
Simon Glass [Fri, 6 Jul 2018 16:27:25 +0000 (10:27 -0600)]
dtoc: Update tests to write failures to /tmp
When a test fails due to an output mismatch (e.g. due to a new property
being adding to a test file) it is currently hard to update the test to
the new output. In particular the tabs in the file are written as \t in
the Python tests.
To make this easier, write both the expected and actual results to /tmp
to allow use of meld, and copying into the test.
Simon Glass [Fri, 6 Jul 2018 16:27:24 +0000 (10:27 -0600)]
dtoc: Add some tests for the fdt module
At present this module is tested via the dtoc tests. This is a bit painful
since the tests are at a higher level and so failures are more difficult
to diagnose.
Add some tests that exercise the fdt module directly.
Simon Glass [Fri, 6 Jul 2018 16:27:23 +0000 (10:27 -0600)]
binman: Move coverage logic into a new test_util file
At present only binman has the logic for determining Python test coverage
but this is useful for other tools also. Move it out into a separate file
so it can be used by other tools.
Simon Glass [Fri, 6 Jul 2018 16:27:20 +0000 (10:27 -0600)]
libfdt: Bring in proposed pylibfdt changes
This provides various patches sent to the devicetree-compiler mailing list
to enhance the Python bindings. A final version of this patch may be
created once upstreaming is complete, but if it takes too long, this can
act as a placeholder.
New pylibfdt features:
- Support for most remaining, relevant libfdt functions
- Support for sequential-write functions
Changes are applied to existing U-Boot tools as needed.
Simon Glass [Fri, 6 Jul 2018 16:27:19 +0000 (10:27 -0600)]
binman: Tidy up setting of entry contents
At present the contents of an entry are set in subclasses simply by
assigning to the data and content_size properties. Add some methods to do
this, so that we have more control. In particular, add a method to set the
contents without changing its size, so we can validate that case.
Add a test case for trying to change the size when this is not allowed.
Simon Glass [Fri, 6 Jul 2018 16:27:18 +0000 (10:27 -0600)]
binman: Tidy up execution of tests
Move all the test execution into the same mechanism so that we can request
a particular test (from any suite) by passing it as an argument to
'binman -t'.
Simon Glass [Fri, 6 Jul 2018 16:27:17 +0000 (10:27 -0600)]
binman: Correct operation of ObtainContents()
This method is supposed to return the contents of an entry. However at
present there is no check that it actually does. Also some implementations
do not return 'True' to indicate success, as required.
Add a check for things working as expected, and correct the
implementations.
This requires some additional test cases to cover things which were missed
originally. Add these at the same time.
Simon Glass [Fri, 6 Jul 2018 16:27:15 +0000 (10:27 -0600)]
binman: Make the operation of Entry__testing explicit
This fake entry is used for testing. At present it only has one behaviour
which is to return an invalid set of entry positions, to cause an error.
The fake entry will need to be used for other things too. Allow the test
.dts file to specify the behaviour of the fake entry, so we can control
its behaviour easily.
While we are here, drop the ReadContents() method, since this only applies
to subclasses of Entry_blob, which Entry__testing is not.
Simon Glass [Mon, 11 Jun 2018 19:07:14 +0000 (13:07 -0600)]
log: Add a way to log a return value with a message
It is sometimes useful to show a message when logging an error return
value, perhaps to add a few details about the problem. Add a function to
support this.
Michael Pratt [Mon, 11 Jun 2018 19:07:09 +0000 (13:07 -0600)]
fdt: Add device tree memory bindings
Support a default memory bank, specified in reg, as well as
board-specific memory banks in subtree board-id nodes.
This allows memory information to be provided in the device tree,
rather than hard-coded in, which will make it simpler to handle
similar devices with different memory banks, as the board-id values
or masks can be used to match devices.
Signed-off-by: Michael Pratt <mpratt@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
projects / u-boot / log