]> git.sur5r.net Git - openocd/log
openocd
12 years agoJLink: added jlink_usb_io() function
Alexander Osipenko [Mon, 28 May 2012 13:22:35 +0000 (17:22 +0400)]
JLink: added jlink_usb_io() function

jlink_usb_io() function added for basic communication,
since jlink_usb_message() is more specific to JTAG transactions.

To verify the patch issue "jlink config" command.

Change-Id: Id7d10bd5e8985d4c77f2e0ca47fb6033db2877bf
Signed-off-by: Alexander Osipenko <sipych@gmail.com>
Reviewed-on: http://openocd.zylin.com/679
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agoJ-Link Unsupported firmware version check
Alexander Osipenko [Fri, 25 May 2012 09:27:48 +0000 (13:27 +0400)]
J-Link Unsupported firmware version check

OpenOCD does not work with the latest firmware versions
of Segger J-Link.

Latest working version: V4.42c
Unsupported versions: 4.44 to 4.46f, 4.20 to 4.30

Older versions of firmware can be found here:
  http://www.segger.com/j-link-older-versions.html

The firmware versions does not correspond directly with
"Software and documentation pack for Windows", it may be
distinguished by the "compile" date in the information string.

Print an warning message if unsupported firmware version detected.

Change-Id: Id7d1f965b8ce2fdbcd0026a85ddd093e2fa48720
Signed-off-by: Alexander Osipenko <sipych@gmail.com>
Reviewed-on: http://openocd.zylin.com/666
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agodocs: J-Link commands added to the manual
Liviu Ionescu [Tue, 29 May 2012 11:52:04 +0000 (14:52 +0300)]
docs: J-Link commands added to the manual

The J-Link related commands and configuration commands were added
to the "8.2 Interface Drivers" section of the manual.
(previously they were enumerated as comments).
The 'jlink pid' was marked as Config all other as Command.
A draft of a compatibility note was added, but probably
a table would be more appropriate.

Change-Id: Ifbe230706815196aaad4e3729ed5089d5088b769
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Reviewed-on: http://openocd.zylin.com/680
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agolpc1768.cfg pulled out constants from flash init as variables
Vandra Akos [Sun, 27 May 2012 10:15:21 +0000 (12:15 +0200)]
lpc1768.cfg pulled out constants from flash init as variables

Seems like an esthetic change, but it will allow easy support for
other lpc17xx devices.

Change-Id: I2cb953ce1afdd82f6ca65b38d5557a28416f895e
Signed-off-by: Vandra Akos <axos88@gmail.com>
Reviewed-on: http://openocd.zylin.com/674
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agoAT91SAM7 Flash: fixed redundant assignation warning
Mirela Tauciuc [Fri, 22 Jun 2012 08:59:41 +0000 (11:59 +0300)]
AT91SAM7 Flash: fixed redundant assignation warning

Change-Id: Iffacdce9ce90c4ea7e0c8647860a0056b952f387
Signed-off-by: Mirela Tauciuc <mirela.tauciuc@gmail.com>
Reviewed-on: http://openocd.zylin.com/691
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
12 years agotools: initial.sh fixed to accept spaces in current path
Liviu Ionescu [Tue, 29 May 2012 16:41:02 +0000 (19:41 +0300)]
tools: initial.sh fixed to accept spaces in current path

When changing the path to the hooks folder, the path needs to be
surrounded by quotation marks, to avoid failures when the current
path contains spaces (not only legal, but a common case on
Mac OS X).

Change-Id: I8f180ab5f26fab00a7d78ebfe5713d4146c27452
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Reviewed-on: http://openocd.zylin.com/683
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
12 years agodocs: update interface support in README
Spencer Oliver [Tue, 29 May 2012 15:01:21 +0000 (16:01 +0100)]
docs: update interface support in README

Change-Id: Id4b982ee426dedc85b643a71c1cdba67d0dd0ffd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/682
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
12 years agodocs: include static members in doxygen output
Spencer Oliver [Fri, 25 May 2012 13:05:23 +0000 (14:05 +0100)]
docs: include static members in doxygen output

Change-Id: I1867e8d7a3bed1a399c0790f63fee68fb6b299c4
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/672
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
12 years agobuild: remove src file execute permission
Spencer Oliver [Fri, 25 May 2012 12:40:24 +0000 (13:40 +0100)]
build: remove src file execute permission

Change-Id: I42a250cdfcd03424a63cd1a255f9cf4a3c6e3ccd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/671
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
12 years agoJim_GetResult was called twice
Vandra Akos [Wed, 23 May 2012 10:47:55 +0000 (12:47 +0200)]
Jim_GetResult was called twice

Removed the superflous call to Jim_GetResult,
as we are reading in the result to a variable
anyways in the next instruction.

Change-Id: Idc96400737dc15e28304e97bcea79fa6c7a88ae1
Signed-off-by: Vandra Akos <axos88@gmail.com>
Reviewed-on: http://openocd.zylin.com/661
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agotarget: fix segfault in arm7_9 8/16bit read
Spencer Oliver [Wed, 23 May 2012 11:31:16 +0000 (12:31 +0100)]
target: fix segfault in arm7_9 8/16bit read

Seems I5347352e7595686634bd0de13fcf6de6e55027b0 introduced an issue when
reading 8/16 bit data - the in buffer was always set to 32bits.

Change-Id: Ife2bb6a20fcb3ec0e486655512164f25ae9196b4
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/660
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
12 years agojtag: fix incorrect LOG_DEBUG abs_chain_position
Spencer Oliver [Tue, 22 May 2012 16:00:55 +0000 (17:00 +0100)]
jtag: fix incorrect LOG_DEBUG abs_chain_position

Call jtag_tap_add before LOG_DEBUG otherwise abs_chain_position does
not get correctly set.

Change-Id: I47bd00cc83259c8bfd5551e08c3bb2ebeb5993f5
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/658
Tested-by: jenkins
Reviewed-by: Bill Traynor <wmat@alphatroop.com>
12 years agoboard: Add Sony Ericsson J100I Phone
Mathias K [Wed, 9 May 2012 20:36:32 +0000 (22:36 +0200)]
board: Add Sony Ericsson J100I Phone

This patch add the Sony Ericsson J100I Phone to the board configurations.

Change-Id: I083ddf067c8ecdfdda0404fe9e9df980dbb86fe8
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/631
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agoconfig: Add TI Calypso CPU configuration
Mathias K [Fri, 25 May 2012 08:57:26 +0000 (10:57 +0200)]
config: Add TI Calypso CPU configuration

This patch add the TI Calypso CPU to the configuration files.

Change-Id: Ieb462960391c4a2c630d7a83699c3b6e8162ace9
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/630
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agojtag: fix osbdm.c typo
Bill Traynor [Tue, 22 May 2012 16:44:16 +0000 (12:44 -0400)]
jtag: fix osbdm.c typo

Fixing up tiny spelling error of "receive" vs. "recieve".

Change-Id: Ib143d7fdb24ac1f2b7bd4ae90cadaf2e12760ff7
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/659
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Peter Stuge <peter@stuge.se>
12 years agojtag: fix opendous typo
Spencer Oliver [Tue, 22 May 2012 11:21:55 +0000 (12:21 +0100)]
jtag: fix opendous typo

Change-Id: Ia88c32f2394bde2048bdd73625e7664c93a9a87d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/656
Tested-by: jenkins
Reviewed-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-by: Peter Stuge <peter@stuge.se>
12 years agojtag: remove opendous clang warnings
Spencer Oliver [Tue, 22 May 2012 11:17:49 +0000 (12:17 +0100)]
jtag: remove opendous clang warnings

Change-Id: I0285c99507931e7d13aad36f4fc559c29a52faca
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/655
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
12 years agostlink: check read_reg result
Spencer Oliver [Tue, 22 May 2012 11:33:40 +0000 (12:33 +0100)]
stlink: check read_reg result

Change-Id: I284824aa6f5eae8f6e910a482e9f7435e649fc0d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/657
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
12 years agotarget: target.h typo and comment cleanup
Spencer Oliver [Mon, 21 May 2012 16:24:17 +0000 (17:24 +0100)]
target: target.h typo and comment cleanup

Change-Id: Ib751803754672bf556f4f65bd3f5621f6bbb7f0c
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/654
Tested-by: jenkins
Reviewed-by: Bill Traynor <wmat@alphatroop.com>
12 years agotarget: enable TARGET_EVENT_EXAMINE_* events
Spencer Oliver [Thu, 10 May 2012 21:36:23 +0000 (22:36 +0100)]
target: enable TARGET_EVENT_EXAMINE_* events

Change-Id: I33efc0994b7bfe0faa2f4e8457fcc3c8e43d3571
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/635
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
Reviewed-by: Bill Traynor <wmat@alphatroop.com>
12 years agotarget: enable TARGET_EVENT_RESUME_* events
Spencer Oliver [Mon, 14 May 2012 12:18:19 +0000 (13:18 +0100)]
target: enable TARGET_EVENT_RESUME_* events

Change-Id: I7d8378f9f34c6674db8c8b29d1a961389578e921
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/640
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
Reviewed-by: Bill Traynor <wmat@alphatroop.com>
12 years agotarget: remove legacy target events
Spencer Oliver [Mon, 14 May 2012 12:15:25 +0000 (13:15 +0100)]
target: remove legacy target events

These events have been deprecated for a number of years, update any
remaining scripts to the new events.

Change-Id: Ic31ff388545ac8b3a500045699ca92c541b13f12
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/634
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
Reviewed-by: Bill Traynor <wmat@alphatroop.com>
12 years agotarget: remove duplicate target events
Spencer Oliver [Thu, 10 May 2012 20:03:31 +0000 (21:03 +0100)]
target: remove duplicate target events

Change-Id: Iba9ae441f3e6d48a7dfafe59ed093fef56a34723
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/633
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
Reviewed-by: Bill Traynor <wmat@alphatroop.com>
12 years agotarget: disable armv6m unaligned memory access
Spencer Oliver [Tue, 15 May 2012 13:37:06 +0000 (14:37 +0100)]
target: disable armv6m unaligned memory access

Change-Id: I42704cf80939ab9c9d4f402d2cd51c196e2fadb3
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/645
Tested-by: jenkins
12 years agoUserGuide: Updated list of supported interfaces, boards, and targets.
Bill Traynor [Tue, 15 May 2012 17:08:27 +0000 (13:08 -0400)]
UserGuide: Updated list of supported interfaces, boards, and targets.

User Guide: Chapter 6 'Config File Guidelines'.  The directory listings
of interfaces, boards, and targets has been brought up to date.

Change-Id: I53f218a94cb81c5e90298b367259e833192af5f3
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/646
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agobuild: add helper/types.h to config.h
Spencer Oliver [Thu, 17 May 2012 11:27:30 +0000 (12:27 +0100)]
build: add helper/types.h to config.h

this header is used in numerous files and adding to config.h
simplifies its use globally.

Change-Id: Id724a9950b90504721233022c7fb5768e9bc5548
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/649
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
12 years agoNEWS: add headline items
Spencer Oliver [Mon, 14 May 2012 12:05:56 +0000 (13:05 +0100)]
NEWS: add headline items

Change-Id: Ie78b0a171af76cf647deef501245caf54209d9f8
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/639
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
12 years agoflash/nor/driver.h: typo fix
Christopher Kilgour [Sun, 20 May 2012 00:29:30 +0000 (17:29 -0700)]
flash/nor/driver.h: typo fix

Change-Id: Ie260f3c38b648e66958c014658bb6860171a7cc9
Signed-off-by: Christopher Kilgour <techie@whiterocker.com>
Reviewed-on: http://openocd.zylin.com/653
Tested-by: jenkins
Reviewed-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agostlink: add myself to copyright header
Spencer Oliver [Thu, 17 May 2012 11:42:13 +0000 (12:42 +0100)]
stlink: add myself to copyright header

Change-Id: I39e23b38ee630b80bccb5ff6b5819efa0fcb120a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/651
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
12 years agostlink: remove superfluous stlink_usb.h
Spencer Oliver [Thu, 17 May 2012 11:34:58 +0000 (12:34 +0100)]
stlink: remove superfluous stlink_usb.h

Change-Id: I34bc59b35fafd3fa659549e350b91310c5b33dd4
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/650
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
12 years agocontrib: enable cortex-m0 and cortex-m4 libdcc support
Spencer Oliver [Tue, 15 May 2012 12:36:11 +0000 (13:36 +0100)]
contrib: enable cortex-m0 and cortex-m4 libdcc support

Change-Id: Ib8ff645d1e5b8baca02de8ea95b629d88b203969
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/644
Tested-by: jenkins
12 years agoremote_bitbang: fix native windows build
Spencer Oliver [Thu, 17 May 2012 10:54:04 +0000 (11:54 +0100)]
remote_bitbang: fix native windows build

Change-Id: Ied29ade0346c4595ffc1dafa788e2d5a595e0de3
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/648
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
12 years agoremote_bitbang: missed closing brace in macro REMOTE_BITBANG_RAISE_ERROR
Alexander Osipenko [Thu, 17 May 2012 08:53:33 +0000 (09:53 +0100)]
remote_bitbang: missed closing brace in macro REMOTE_BITBANG_RAISE_ERROR

Change-Id: I591308bd98810ef6361106c207c55b83c3a83890
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/647
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
12 years agodocs: Fix incorrect -rtos option values
Peter Stuge [Mon, 14 May 2012 15:47:09 +0000 (17:47 +0200)]
docs: Fix incorrect -rtos option values

Commit 9ca1592cb9fe4e61ee5bc327345fdfc254c9fe13 started on documentation
for the -rtos option, but some of the documented values were incorrect so
we'll clean up the mess here.

Many thanks to Freddie Chopin for spotting this!

Change-Id: Iaa633bd40ff5f75dd6a69e74e79dafc1643ee21a
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://openocd.zylin.com/642
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
12 years agodocs: add initial target rtos support info
Spencer Oliver [Mon, 14 May 2012 14:09:42 +0000 (15:09 +0100)]
docs: add initial target rtos support info

Change-Id: Idd39ce17922602aedd4626496ed8f5422bb76e07
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/641
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
12 years agojtag: add opendous and estick support
Spencer Oliver [Fri, 11 May 2012 08:10:54 +0000 (09:10 +0100)]
jtag: add opendous and estick support

Change-Id: I49c25d226f05fdcaca6cbfc35c2ab47e8464abec
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/611
Tested-by: jenkins
12 years agostlink: add armv7m stlink handling
Spencer Oliver [Fri, 11 May 2012 08:39:58 +0000 (09:39 +0100)]
stlink: add armv7m stlink handling

This enables us to better handle some of the low level functions that the
stlink does not support. It also enables us to share a few more of the
standard cortex_m3 functions if necessary.

Change-Id: I7a2c57450122012ec189245d8879d8967913e00e
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/637
Tested-by: jenkins
12 years agoflash: blank check use default_flash_blank_check
Spencer Oliver [Thu, 10 May 2012 09:33:07 +0000 (10:33 +0100)]
flash: blank check use default_flash_blank_check

Use default_flash_blank_check, this will use the much faster
blank_check_memory handler if supported - 15x quicker on stm32f4.

Otherwise it will fall back to using the slower default_flash_mem_blank_check.

Change-Id: Ia231b3e95468c9e92594dbdbe1fa2d69e1506fc3
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/632
Tested-by: jenkins
12 years agoflash: fix protect check for pic32mx1x/2x family
Spencer Oliver [Thu, 3 May 2012 09:44:42 +0000 (10:44 +0100)]
flash: fix protect check for pic32mx1x/2x family

Change-Id: Ib2692d8b79e52cd40f429008047494aa7f552984
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/612
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
12 years agojimtcl: update jim to fix make clean bug
Spencer Oliver [Fri, 11 May 2012 09:04:38 +0000 (10:04 +0100)]
jimtcl: update jim to fix make clean bug

jimtcl 0.73 has a issue when make clean is called.
we have only included that fix as this is close to a release to update
to jimtcl master.

Change-Id: I5791ff32a98bd76e52feb9475605cbecf58420e5
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/638
Tested-by: jenkins
12 years agostlink: fix stlink api2 single step
Spencer Oliver [Tue, 8 May 2012 12:51:09 +0000 (13:51 +0100)]
stlink: fix stlink api2 single step

This makes the newer v2 api behave as per the v1 api, eg. single stepping
masks all interrupts.

A better long term solution is to use same behaviour as a cortex-m3
target, see CORTEX_M3_ISRMASK_AUTO.

Change-Id: Iaf9f9adf225cf274faaac938050bb996582aa98f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/621
Tested-by: jenkins
12 years agostlink: add stlink_api cmd
Spencer Oliver [Fri, 4 May 2012 13:31:25 +0000 (14:31 +0100)]
stlink: add stlink_api cmd

This enables the manual selection of the stlink api version.

Change-Id: I0ec8c5b0a101b6456f426d2fec65971da56db4e7
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/617
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
12 years agostlink: stlink/v1 use v2 api if supported
Spencer Oliver [Fri, 4 May 2012 11:48:56 +0000 (12:48 +0100)]
stlink: stlink/v1 use v2 api if supported

The api v2 is supported on the stlink/v1 if it has a least v11 firmware.

Change-Id: Idfdb5a7f5a5881326017451ae9b6004eeaa46a96
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/616
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
12 years agomips: support connecting under reset
Spencer Oliver [Tue, 1 May 2012 13:29:43 +0000 (14:29 +0100)]
mips: support connecting under reset

Some targets support connecting while the target's srst is asserted.
Tested on pic32 family.

Change-Id: I0d20c40af6d031d1306043893e95e61f484c0a87
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/608
Tested-by: jenkins
12 years agoUse hardware reset and connect under reset on boards with ST-LINK/V2, as
Freddie Chopin [Tue, 1 May 2012 17:47:28 +0000 (19:47 +0200)]
Use hardware reset and connect under reset on boards with ST-LINK/V2, as
now it is supported.

Change-Id: Id3b2ca9a2270974a5f453323f9057ecece400c94
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/609
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agocfg: add stm320518-eval onboard stlink config
Spencer Oliver [Thu, 3 May 2012 15:09:09 +0000 (16:09 +0100)]
cfg: add stm320518-eval onboard stlink config

Change-Id: Ie92a87ce077c538fdd04af37c798e0a8054b423a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/610
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
12 years agostlink: support connecting under reset
Spencer Oliver [Tue, 1 May 2012 13:00:27 +0000 (14:00 +0100)]
stlink: support connecting under reset

Some targets support connecting while the target's srst is asserted.
Tested on stm32 family.

Change-Id: I1197dd721a1e1cbf95ee77dfd8e1082b165b22a9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/607
Tested-by: jenkins
12 years agocortex-m3: support connecting under reset
Spencer Oliver [Tue, 1 May 2012 12:18:42 +0000 (13:18 +0100)]
cortex-m3: support connecting under reset

Some targets support connecting while the target's srst is asserted.
Tested on stm32 family.

Change-Id: I9df43623025e37832155aeee7aa099b844b85f16
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/606
Tested-by: jenkins
12 years agocfi: fix write_bank segfault with spansion flash on armv7m
Aurelien Jacobs [Tue, 8 May 2012 18:53:18 +0000 (20:53 +0200)]
cfi: fix write_bank segfault with spansion flash on armv7m

cfi_spansion_write_block() passes an arm_algorithm struct to
target_run_algorithm() which in turn calls armv7m_start_algorithm()
which expect an armv7m_algorithm struct.
As armv7m_algorithm is bigger than arm_algorithm, when
armv7m_start_algorithm() writes in the struct, it overrun the buffer,
writting junk on the stack, which latter on generates a segfault.

This patch ensure we use a properly sized armv7m_algorithm struct
when the target is an armv7m.

Change-Id: I4ab67c15ae4bb72454414a81b92a4231dcdb2239
Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-on: http://openocd.zylin.com/623
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agocfi: fix cfi arch check regression
Spencer Oliver [Thu, 3 May 2012 15:34:16 +0000 (16:34 +0100)]
cfi: fix cfi arch check regression

seems 9933fa334de551096674d4044ed7ac2152213e8b introduce a regression
if the target was anything other than armv4_5 or armv7m.

Just check that we have an arm target.

Change-Id: I67c05138e5be2952ee92e9bfa15e1d050844462a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/615
Tested-by: jenkins
Reviewed-by: Aurelien Jacobs <aurel@gnuage.org>
12 years agocfi: check supported arch
Spencer Oliver [Thu, 3 May 2012 15:30:31 +0000 (16:30 +0100)]
cfi: check supported arch

check that the cfi driver supports the current target arch.

Change-Id: I8a95908684de67bf1657d1956f2573662a641cc1
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/614
Tested-by: jenkins
Reviewed-by: Aurelien Jacobs <aurel@gnuage.org>
12 years agobuild: use generic name for arm_algorithm vars
Spencer Oliver [Thu, 3 May 2012 15:24:11 +0000 (16:24 +0100)]
build: use generic name for arm_algorithm vars

This makes the code a bit easier to read as arm_algorithm can
refer to other arch's, not just armv4_5.

Change-Id: I78c99d40f34cda04e06f2daee75b48ff40a1d23d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/613
Tested-by: jenkins
Reviewed-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agobuild: add missing erase_check loader src
Spencer Oliver [Tue, 1 May 2012 08:48:09 +0000 (09:48 +0100)]
build: add missing erase_check loader src

Change-Id: I1534c1ea1606fda9eb6ffa6a11a708f8c8a3d46a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/605
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agoarmv7m: update crc/erase_check loaders for cortex-m0
Spencer Oliver [Tue, 1 May 2012 08:46:07 +0000 (09:46 +0100)]
armv7m: update crc/erase_check loaders for cortex-m0

Use loaders that have been built for cortex-m0, making them usable for both
cortex-m0 and cortex-m3 families.

Change-Id: Ifd82be87eaec2cb96464290c80800cec3630d619
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/604
Tested-by: jenkins
12 years agocontrib: fix Neo1973 udev permission typo
Spencer Oliver [Fri, 11 May 2012 08:06:05 +0000 (09:06 +0100)]
contrib: fix Neo1973 udev permission typo

Change-Id: I6d5ad0cc28e0cb52104ead9e974b8b1ed92d9cdc
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/636
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
12 years agoflash: use correct stm32f0 flash size register
Spencer Oliver [Mon, 30 Apr 2012 13:29:18 +0000 (14:29 +0100)]
flash: use correct stm32f0 flash size register

The stm32f0 parts use a different address then the rest of the family.
Add a function that returns the correct FLASH_SIZE reg depending on variant.

Change-Id: Idb41580f7162f395b347cec034d6b745847326b7
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/601
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agocfg: increase stm32f0discovery board working area
Spencer Oliver [Mon, 30 Apr 2012 13:30:12 +0000 (14:30 +0100)]
cfg: increase stm32f0discovery board working area

Change-Id: Iea166ee27fc60bbfdeb851fdcf71509f3984f72f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/602
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agocfg: increase stm32f0 default working area
Spencer Oliver [Mon, 30 Apr 2012 13:45:23 +0000 (14:45 +0100)]
cfg: increase stm32f0 default working area

The smallest stm32f0 has 4k sram, so use this as the default.

Change-Id: I9097be9608da92b1b9da504e5bacc1280c86907a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/603
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agocfg: Deleted duplicate busblaster.cfg and renamed original.
Bill Traynor [Tue, 8 May 2012 13:32:35 +0000 (09:32 -0400)]
cfg: Deleted duplicate busblaster.cfg and renamed original.

The busblaster.cfg was contributed on April 23, 2012 and is a
duplicate of dp_busblaster.cfg that was contributed on Oct. 23,
2011.  Therefore, deleting the second version.  Also, renaming
the original dp_busblaster.cfg to simply busblaster.cfg, as this
name is more concise.

Change-Id: Iccb1f10f53dbbb248b1ff4c6295eaf67c32247c1
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/622
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
12 years agocfg: Fixed product link to Flyswatter2
Bill Traynor [Mon, 7 May 2012 19:54:51 +0000 (15:54 -0400)]
cfg: Fixed product link to Flyswatter2

Fixed the product link to the Flyswatter2 debugger:
http://www.tincantools.com/product.php?productid=16153

Change-Id: I7d65e8c94d4521e61b9ae72a5ce14b140b775697
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/620
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
12 years agocfg: add default pid/vid pair to beaglebone board cfg.
Bill Traynor [Mon, 7 May 2012 18:38:16 +0000 (14:38 -0400)]
cfg: add default pid/vid pair to beaglebone board cfg.

The newer versions of BeagleBone boards use the default vid/pid
pair for FT2232 debugging.  Please see the following README:
http://beagleboard.org/static/beaglebone/latest/README.htm
On revision A3/A4 boards, the VID/PID were chosen to match the
 TI XDS100v2 (0x0403/0xA6D0). On A5 and newer revisions when we've
 given the authors of CCS the chance to update their software, the
generic FTDI VID/PID (0x0403/0x6010) will be used to simplify
installation of drivers for systems already having those drivers.

Change-Id: I44228eb2029162f23d084eb05bcfef39e615668d
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/619
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
12 years agobuild: remove clang unused variable assignment warnings
Spencer Oliver [Fri, 27 Apr 2012 13:28:51 +0000 (14:28 +0100)]
build: remove clang unused variable assignment warnings

Change-Id: Ibe5254704d6cd879a318a82c4f50d9da3c14276c
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/600
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agobuild: remove clang unused variable increments warnings
Spencer Oliver [Fri, 27 Apr 2012 13:00:46 +0000 (14:00 +0100)]
build: remove clang unused variable increments warnings

Change-Id: Ib755474aa46f7233495fae1947bc27cd0b2d6b4f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/599
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agocfg: fix incorrect stm32vldiscovery working area
Spencer Oliver [Fri, 27 Apr 2012 09:44:13 +0000 (10:44 +0100)]
cfg: fix incorrect stm32vldiscovery working area

The working area used in the config was incorrect, we only have 8K on this
board not 16K as the original cfg was declaring.

Change-Id: Ie0309fb86d839bd3bc1ac9383905b581fac5c388
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/598
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agocfg: allow stm32discovery parameter override
Spencer Oliver [Fri, 27 Apr 2012 09:41:45 +0000 (10:41 +0100)]
cfg: allow stm32discovery parameter override

This enable the user or board config to override the parameters
passed to stm32_stlink.cfg.

Required to fix a incorrect working area bug with the stm32vldiscovery.

Change-Id: I40a4f7913ff37d577d44b1f23befccf0317080a1
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/597
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agocfg: remove unused stlink options
Spencer Oliver [Thu, 19 Apr 2012 14:53:07 +0000 (15:53 +0100)]
cfg: remove unused stlink options

reset_config is now supported by stlink, remove from the config as this
is a per board option.

Change-Id: I85208d2154502b8d3a098afe1d9a28d75820a7c0
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/582
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agostlink: support srst reset
Spencer Oliver [Thu, 19 Apr 2012 14:51:14 +0000 (15:51 +0100)]
stlink: support srst reset

This adds the ability to support srst reset for the stlink/v2.
stlink/v1 will fallback to using SYSRESETREQ which is a full reset - including peripherals.

To enable the use of the srst add the following to your cfg:
reset_config srst_only

Change-Id: I570de607c5f370fd6a4abf47360686c9be07bcdd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/581
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agostlink: export write_debug_reg
Spencer Oliver [Thu, 19 Apr 2012 14:46:47 +0000 (15:46 +0100)]
stlink: export write_debug_reg

Change-Id: I3944911d4a71dba4af48470ceb3e4850784a0e7d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/580
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agostlink: add hardware srst functions to stlink/v2
Spencer Oliver [Thu, 19 Apr 2012 14:45:06 +0000 (15:45 +0100)]
stlink: add hardware srst functions to stlink/v2

Change-Id: Ib82b6a1116b9f396f1933cc5526733334254fd62
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/579
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
12 years agoflash: update stm32f0x version info
Spencer Oliver [Thu, 19 Apr 2012 13:04:46 +0000 (14:04 +0100)]
flash: update stm32f0x version info

Change-Id: Iab0962021e6243d1df3e7c647654a51b4bf50d72
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/578
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agostlink: default to latest api available
Spencer Oliver [Thu, 19 Apr 2012 13:03:32 +0000 (14:03 +0100)]
stlink: default to latest api available

Change-Id: Ic04128f4020055587bb87250f41e5c804d9c2b01
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/577
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agostlink: add improved STLINK_JTAG_API_V2 support
Spencer Oliver [Thu, 19 Apr 2012 12:56:23 +0000 (13:56 +0100)]
stlink: add improved STLINK_JTAG_API_V2 support

The STLINK/V2 supports two api's.
This completes the support so STLINK_JTAG_API_V2 is usable.

Support for hardware srst still needs adding.

Change-Id: Ic4d0499be2a225d18abf96fd6f5ce5e295fb1f37
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/561
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agostlink: support stlink api result
Spencer Oliver [Thu, 5 Apr 2012 16:17:03 +0000 (17:17 +0100)]
stlink: support stlink api result

The stlink api does support results for some functions - add support.

Change-Id: I39cb495408c46af8bc343b198a1e0bd4c7aee6d8
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/560
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
12 years agoSAM3X - Added support for at91sam3x8h-ES, fixed CIDR for ES2 and production
Olivier Schonken [Thu, 19 Apr 2012 06:53:27 +0000 (08:53 +0200)]
SAM3X - Added support for at91sam3x8h-ES, fixed CIDR for ES2 and production

The first available devkits for the at91sam3x8h had the ES device populated.
The ES device had an error in the CIDR, specifically in the last byte of
which the upper 3 bits identifies the chip family - cortex-m3, arm7tdmi etc.

The problem was fixed on the ES2 devices - Thanks to Pat Hickey for giving me
the heads-up.

Change-Id: I13dd7fbe0cffaf76f948188c9459dc3cf4435570
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Reviewed-on: http://openocd.zylin.com/575
Tested-by: jenkins
Reviewed-by: Jim Norris <u17263@att.net>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agotopic: Added support for the SAM4S variants
Olivier Schonken [Sun, 18 Mar 2012 13:36:54 +0000 (15:36 +0200)]
topic: Added support for the SAM4S variants

Atmel introduced 6 new Cortex-M4 processors on 2011-10-26
SAM4S16C - 1024KB flash LQFP100/BGA100
SAM4S16B - 1024KB flash LQFP64/QFN64
SAM4S16A - 1024KB flash LQFP48/QFN48
SAM4S8C - 512KB flash LQFP100/BGA100
SAM4S8B - 512KB flash LQFP64/QFN64
SAM4S8A - 512KB flash LQFP48/QFN48

The SAM4S processors still suffer from the "6 waitstates needed
to program device" errata.

Other relevant changes are:
1. Address of flash memory starts at 0x400000.
2. EWP (Erase page and write page) only works for the first two 8KB "sectors"
3. Because of the EWP not working for all the sectors, normal page writes have
to be used.  The default_flash_blank_check is used to check if lockregions
should be erased.
4. The EA (Erase All) command takes 7.3s to complete. (Previous timeout was
500 ms)
5. There are 128 lockable regions of 8KB each.

Implemented default blank checking, and page erase for load_image scenarios.
This is to compensate for the EWP flash commands only working on the
first 2 8KB sectors.

Change-Id: I7c5a52b177f7849a107611fd0f635fc416cfb724
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Reviewed-on: http://openocd.zylin.com/528
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agotopic: Fixed a clang Dead assignment warning.
Linus Tolke [Tue, 24 Apr 2012 19:55:51 +0000 (21:55 +0200)]
topic: Fixed a clang Dead assignment warning.

The value returned from target_write_buffer is still ignored.

Change-Id: Icb49d4d1313a5e4f7df68d3f122a5f81cfa0604a
Signed-off-by: Linus Tolke <linus@tigris.org>
Reviewed-on: http://openocd.zylin.com/596
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
12 years agotopic: Ignored TAGS files.
Linus Tolke [Tue, 24 Apr 2012 18:57:32 +0000 (20:57 +0200)]
topic: Ignored TAGS files.

Allow use of TAGS.

Change-Id: I5e71e8986671642b49cc9a62d37cc8c0dfa37181
Signed-off-by: Linus Tolke <linus@tigris.org>
Reviewed-on: http://openocd.zylin.com/595
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
12 years agocfg: Add interface config for Dangerous Prototypes Bus Blaster
Allen Martin [Sat, 21 Apr 2012 03:33:28 +0000 (20:33 -0700)]
cfg: Add interface config for Dangerous Prototypes Bus Blaster

This is a FT2232 based USB JTAG dongle

Change-Id: Ibed773a23b6446df62fe4eac16c27fb2d741f4c3
Signed-off-by: Allen Martin <amartin@nvidia.com>
Reviewed-on: http://openocd.zylin.com/589
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agoUserGuide: Fixing link to USBprog tool.
Bill Traynor [Sun, 22 Apr 2012 13:21:43 +0000 (09:21 -0400)]
UserGuide: Fixing link to USBprog tool.

In section '2.8 USB Other' updated the link to the USBprog tool:
http://shop.embedded-projects.net/

Change-Id: I7fa453934ac6a7889e01b22b7e0cb07f42ee168d
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/591
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agoUserGuide: Updated link to Versaloon-Link tool.
Bill Traynor [Sun, 22 Apr 2012 13:29:03 +0000 (09:29 -0400)]
UserGuide: Updated link to Versaloon-Link tool.

In section '2.8 USB Other' updated the URL to the Versaloon-Link to:
http://www.versaloon.com

Change-Id: Idd92333cb3d87d1b89dfb282134332387df5a0fc
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/592
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agoUserGuide: Fixed link to Wiggler2 project.
Bill Traynor [Sun, 22 Apr 2012 13:47:37 +0000 (09:47 -0400)]
UserGuide: Fixed link to Wiggler2 project.

In section '2.9 IBM PC Parallel Printer Port based' fixed link to
the Wiggler2 project and removed the alternate URL text to retain
style consistency with the other URLs in the document:
http://www.ccac.rwth-aachen.de/~michaels/index.php/hardware/armjtag

Change-Id: I879db1c6eaf683ca6475a0f466f987087c9d60d0
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/593
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agoUserGuide: Fixed link to ST flashlink.
Bill Traynor [Sun, 22 Apr 2012 13:54:02 +0000 (09:54 -0400)]
UserGuide: Fixed link to ST flashlink.

In section '2.9 IBM PC Parallel Printer Port Based' fixed link to
ST's flashlink PDF and removed alternate URL text:
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/
DATA_BRIEF/DM00039500.pdf

Change-Id: I99702dd00d4145784baee1f63b5998bf79e06678
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/594
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agoUserGuide: Fixing two typos.
Bill Traynor [Sun, 22 Apr 2012 13:08:38 +0000 (09:08 -0400)]
UserGuide: Fixing two typos.

In Section 2.7 USB ST-LINK based made these two changes:
"they only works with" to "they only work with"
"following method's" to "following methods"

Change-Id: Idfe6c11c3fa6f2157d01697cd7f480a9d495c8e2
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/590
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agodocs: update gerrit publish refs
Spencer Oliver [Mon, 16 Apr 2012 16:53:28 +0000 (17:53 +0100)]
docs: update gerrit publish refs

since gerrit 2.3 pushing changes to refs/for/ is deprecated in
favour of using refs/publish/.

Change-Id: I6244b9645da2144921583bd9778a95c563fac89f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/567
Tested-by: jenkins
12 years agoSplit olimex_stm32_h107.cfg.
Uwe Hermann [Sun, 15 Apr 2012 16:42:39 +0000 (18:42 +0200)]
Split olimex_stm32_h107.cfg.

Use one board file per eval board, so that the filename matches the
exact board the user has / wants to use. Merging different boards into
one file is confusing.

Change-Id: I7c50233924a87a913723d7215c4851039c2971bc
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/566
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agoUserGuide: Fixed link to Raisonance RLINK.
Bill Traynor [Thu, 19 Apr 2012 18:16:23 +0000 (14:16 -0400)]
UserGuide: Fixed link to Raisonance RLINK.

In section 2.6 USB JLINK based, fixed link to RLINK:
http://www.mcu-raisonance.com/~rlink-debugger-programmer__microcontrollers__tool
~tool__T018:4cn9ziz4bnx6.html

Change-Id: I15f7a1b68b851054e07eefc07a50b4590ebce677
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/588
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agoUserGuide: Update Section 2.3 USB FT2232 Based
Bill Traynor [Thu, 19 Apr 2012 15:12:00 +0000 (11:12 -0400)]
UserGuide: Update Section 2.3 USB FT2232 Based

Updated the link for the usbjtag project to the correct URL:
http://elk.informatik.fh-augsburg.de/hhweb/doc/openocd/usbjtag/usbjtag.html

Added a NOTE to indicate the axm0432_jtag as no longer being
available from the axman.com page.

Change-Id: I70727303dad58d9dc0c5f9b7cce219288b762042
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/583
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agoUserGuide: Add ref. to Flyswatter2
Bill Traynor [Thu, 19 Apr 2012 15:40:30 +0000 (11:40 -0400)]
UserGuide: Add ref. to Flyswatter2

Added the Flyswatter2 to section 2.3 USB FT2232 Based hardware
list.

Change-Id: I6a382644b5a0313d30afb5a97d0a9ea00f01efa9
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/584
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agoUserGuide: Fixed link to USB-JTAG project.
Bill Traynor [Thu, 19 Apr 2012 16:19:59 +0000 (12:19 -0400)]
UserGuide: Fixed link to USB-JTAG project.

Updated the URL to Kolja Waschk's USB-Blaster compatible adapter:
http://ixo-jtag.sourceforge.net/

Change-Id: If9d2875b5ba5d3bfaaf524cd253a5fab53e05371
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/585
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agoUserGuide: Fixed link to IAR J-Link.
Bill Traynor [Thu, 19 Apr 2012 16:30:19 +0000 (12:30 -0400)]
UserGuide: Fixed link to IAR J-Link.

In Section 2.5 USB JLINK based, fixed the URL for IAR J-Link:
http://www.iar.com/en/products/hardware-debug-probes/iar-j-link/

Change-Id: If613d2e915a0a704569d74094e612e34bcc849d3
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/586
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agoHACKING: Fix instruction for git pull --rebase
Bill Traynor [Wed, 18 Apr 2012 20:56:10 +0000 (16:56 -0400)]
HACKING: Fix instruction for git pull --rebase

When following the Patch Guidelines step by step,
an error occurs at step 6.

"git pull --rebase origin/master" results in the error:

fatal: 'origin/master' does not appear to be a git repository

Removing the / seems to fix this.

Change-Id: I4e2fa23c60654abeaebd3b25a8c8375aa07b0abd
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://openocd.zylin.com/574
Reviewed-by: David Anders <danders.dev@gmail.com>
Tested-by: jenkins
12 years agozy1000: fixed link to Zylin ZY1000 JTAG Probe
Bill Traynor [Wed, 18 Apr 2012 18:06:49 +0000 (14:06 -0400)]
zy1000: fixed link to Zylin ZY1000 JTAG Probe

This patch fixes the link to the Zylin ZY1000 JTAG Probe webpage.
The ZY1000 product line was acquired by Ultimate Solutions, Inc. in May 2011.

Change-Id: If68cd45a0c47aa20b2e4bb62939b2c505c8c8c2e
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/571
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agopandaboard: add initial TCL support for pandaboard-es
David Anders [Wed, 18 Apr 2012 20:12:24 +0000 (15:12 -0500)]
pandaboard: add initial TCL support for pandaboard-es

add initial TCL support for the pandaboard-es which is
based on the omap4460 from Texas Instruments.

Change-Id: Ic63588721487feb95e7cb3d41cfaab0d2f181766
Signed-off-by: David Anders <danders.dev@gmail.com>
Reviewed-on: http://openocd.zylin.com/573
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
12 years agoomap4460: add initial TCL support for the omap4460 es1.0
David Anders [Wed, 18 Apr 2012 19:42:50 +0000 (14:42 -0500)]
omap4460: add initial TCL support for the omap4460 es1.0

this patch adds the initial support for the omap4460 es1.0
version which is similar to the omap4430 and used on the
pandaboard-es.

Change-Id: If885f7d9f8809929bd799786b539e4f499fa3478
Signed-off-by: David Anders <danders.dev@gmail.com>
Reviewed-on: http://openocd.zylin.com/572
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
12 years agocfg: add stm32f0discovery board config
Spencer Oliver [Wed, 18 Apr 2012 09:47:29 +0000 (10:47 +0100)]
cfg: add stm32f0discovery board config

Change-Id: I4fccdbd4e0a3bc70cd425c910ad1007519098e20
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/570
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
12 years agoGlyn Tonga2: Faster JTAG speed after CPU/RAM init.
Uwe Hermann [Tue, 10 Apr 2012 22:02:51 +0000 (00:02 +0200)]
Glyn Tonga2: Faster JTAG speed after CPU/RAM init.

Change-Id: Ib08dae0035355138c468483a7ee2d73aadedf430
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/564
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agostlink: correctly format printed hex addresses
Spencer Oliver [Thu, 5 Apr 2012 16:07:20 +0000 (17:07 +0100)]
stlink: correctly format printed hex addresses

Change-Id: I4a139989927249bb5e9dcc4804965c85c37cc09b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/559
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
12 years agoSTM32L: Write partial-page flash data after full-page data
Mathias K [Wed, 4 Apr 2012 09:36:38 +0000 (11:36 +0200)]
STM32L: Write partial-page flash data after full-page data

The target address for the partial data needs to be bumped past the
full page data. Otherwise, the partial data overwrites the start of
the flash block.

Change-Id: I1246b2fa8acbdb8193edcf7029309f11d1c6069c
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/555
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
12 years agoft2232: Support for Digilent HS1 USB adapter
Stephane Bonnet [Wed, 4 Apr 2012 19:05:25 +0000 (21:05 +0200)]
ft2232: Support for Digilent HS1 USB adapter

* Added support to the FT2232 driver for the FT2232H-based
  Digilent HS1 adapter.

Change-Id: Iab6cc15f299badaf115615b5d4d785ecb2273c27
Signed-off-by: Stephane Bonnet <bonnetst@hds.utc.fr>
Reviewed-on: http://openocd.zylin.com/558
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
12 years agocfg: add icnova_imx53_sodimm board config
Wjatscheslaw Stoljarski (Slawa) [Tue, 27 Mar 2012 08:32:33 +0000 (10:32 +0200)]
cfg: add icnova_imx53_sodimm board config

Add board config for In-Circuit ICnova iMX53 SODIMM

Change-Id: I3802ab1695baa75c1f170cf1af0e38ada284c0b8
Signed-off-by: Wjatscheslaw Stoljarski (Slawa) <wjatscheslaw.stoljarski@kiwigrid.com>
Reviewed-on: http://openocd.zylin.com/543
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>