]> git.sur5r.net Git - openocd/commitdiff
ft2232: Support for Digilent HS1 USB adapter
authorStephane Bonnet <bonnetst@hds.utc.fr>
Wed, 4 Apr 2012 19:05:25 +0000 (21:05 +0200)
committerSpencer Oliver <spen@spen-soft.co.uk>
Tue, 10 Apr 2012 20:19:47 +0000 (20:19 +0000)
* Added support to the FT2232 driver for the FT2232H-based
  Digilent HS1 adapter.

Change-Id: Iab6cc15f299badaf115615b5d4d785ecb2273c27
Signed-off-by: Stephane Bonnet <bonnetst@hds.utc.fr>
Reviewed-on: http://openocd.zylin.com/558
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
doc/openocd.texi
src/jtag/drivers/ft2232.c
tcl/interface/digilent-hs1.cfg [new file with mode: 0644]

index 71605ecea39fb88e3e5ee6e4b741c0c0bf3ac72b..55fbf4ff386897af3580165900e6818660f0953b 100644 (file)
@@ -374,6 +374,8 @@ Stellaris eval boards, they can be used to debug other target boards.
 @* Link @url{http://www.hitex.com/index.php?id=cortino}
 @item @b{dlp-usb1232h}
 @* Link @url{http://www.dlpdesign.com/usb/usb1232h.shtml}
+@item @b{digilent-hs1}
+@* Link @url{http://www.digilentinc.com/Products/Detail.cfm?Prod=JTAG-HS1}
 @end itemize
 
 @section USB-JTAG / Altera USB-Blaster compatibles
index 3a156bfea7d048194d97e2925fa883fa5e069b9c..e6a7363fc20f28742b0a15b1afcf4ea7c702c4d8 100644 (file)
@@ -193,6 +193,7 @@ static int redbee_init(void);
 static int lisa_l_init(void);
 static int flossjtag_init(void);
 static int xds100v2_init(void);
+static int digilent_hs1_init(void);
 
 /* reset procedures for supported layouts */
 static void ftx23_reset(int trst, int srst);
@@ -211,6 +212,7 @@ static void signalyzer_h_reset(int trst, int srst);
 static void ktlink_reset(int trst, int srst);
 static void redbee_reset(int trst, int srst);
 static void xds100v2_reset(int trst, int srst);
+static void digilent_hs1_reset(int trst, int srst);
 
 /* blink procedures for layouts that support a blinking led */
 static void olimex_jtag_blink(void);
@@ -337,6 +339,11 @@ static const struct ft2232_layout  ft2232_layouts[] = {
                .init = xds100v2_init,
                .reset = xds100v2_reset,
        },
+       { .name = "digilent-hs1",
+               .init = digilent_hs1_init,
+               .reset = digilent_hs1_reset,
+               .channel = INTERFACE_A,
+       },
        { .name = NULL, /* END OF TABLE */ },
 };
 
@@ -4179,6 +4186,33 @@ static void ktlink_blink(void)
        buffer_write(high_direction);
 }
 
+/********************************************************************
+ * Support for Digilent HS-1
+ * JTAG adapter from Digilent
+ * http://www.digilent.com
+ * Author: Stephane Bonnet bonnetst@hds.utc.fr
+ *******************************************************************/
+
+static int digilent_hs1_init(void)
+{
+       /* the adapter only supports the base JTAG signals, no nTRST
+          nor nSRST */
+       low_output      = 0x88;
+       low_direction   = 0x8b;
+
+       /* initialize low byte for jtag */
+       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
+               LOG_ERROR("couldn't initialize FT2232 with 'digilent_hs1' layout");
+               return ERROR_JTAG_INIT_FAILED;
+       }
+       return ERROR_OK;
+}
+
+static void digilent_hs1_reset(int trst, int srst)
+{
+       /* Dummy function, no reset signals supported. */
+}
+
 static const struct command_registration ft2232_command_handlers[] = {
        {
                .name = "ft2232_device_desc",
diff --git a/tcl/interface/digilent-hs1.cfg b/tcl/interface/digilent-hs1.cfg
new file mode 100644 (file)
index 0000000..e35f0cf
--- /dev/null
@@ -0,0 +1,15 @@
+#
+# Digilent HS1
+#
+# The Digilent HS1 is a high-speed FT2232H-based adapter, compliant with the
+# Xilinx JTAG 14-pin pinout.
+# It does not support ARM reset signals (SRST and TRST) but can still be used for
+# hardware debugging, with some limitations.
+#
+# http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,395,922&Prod=JTAG-HS1
+#
+
+interface ft2232
+ft2232_device_desc "Digilent Adept USB Device"
+ft2232_layout digilent-hs1
+ft2232_vid_pid 0x0403 0x6010