Wolfgang Denk [Fri, 16 Jun 2006 15:04:45 +0000 (17:04 +0200)]
Add support for CONFIG_SERIAL_MULTI on MPC5xxx
Patch by Martin Krause, 8 Jun 2006
This patch supports two serial consoles on boards with
a MPC5xxx CPU. The console can be switched at runtime
by setting stdin, stdout and stderr to the desired serial
interface (serial0 or serial1). The PSCs to be used as
console port are definded by CONFIG_PSC_CONSOLE
and CONFIG_PSC_CONSOLE2.
See README.serial_multi for details.
Wolfgang Denk [Fri, 16 Jun 2006 14:57:18 +0000 (16:57 +0200)]
Bugfix in I2C initialisation on S3C2400.
If the bus is blocked because of a previously interrupted
transfer, up to eleven clocks are generated on the I2CSCL
line to complete the transfer and to free the bus.
With this fix pin I2CSCL (PG6) is really configured as GPIO
so the clock pulses are really generated.
Patch by Martin Krause, 04 Apr 2006
Wolfgang Denk [Fri, 16 Jun 2006 14:14:28 +0000 (16:14 +0200)]
Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
Patch by Martin Krause, 08 Nov 2005
In tsc2000_read_channel() the delay after setting the multiplexer
to a temperature channel is increased from 1,5 ms to 10 ms. This
is to allow the multiplexer inputs to stabilize after huge steps
of the input signal level.
Wolfgang Denk [Fri, 16 Jun 2006 14:11:34 +0000 (16:11 +0200)]
Adjust TQM5200 make targets
Make the automatic CS configuration the default.
The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
and CONFIG_TQM5200_AC are removed.
"TQM5200_config" is now the default for STK52XX.200 base boards.
On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
Patch by Martin Krause, 07 Nov 2005
Wolfgang Denk [Fri, 16 Jun 2006 13:56:12 +0000 (15:56 +0200)]
Fix setting of environment variable "ver" on trab board
The environment variable "ver" is now set before
do_auto_update() is called, so that "ver" can be used
in USB update scripts.
Patch by Martin Krause, 27 Oct 2005
Scott McNutt [Thu, 8 Jun 2006 16:08:12 +0000 (12:08 -0400)]
Nios II - Add EPCS Controller bootrom work-around
-When booting from an epcs controller, the epcs bootrom may leave the
slave select in an asserted state causing soft reset hang. This
patch ensures slave select is negated at reset.
Patch by Scott McNutt, 08 Jun 2006
Scott McNutt [Thu, 8 Jun 2006 15:59:57 +0000 (11:59 -0400)]
Nios II - Fix I/O Macros and mini-app stubs
-Fix asm/io.h macros
-Eliminate use of CACHE_BYPASS in cpu code
-Eliminate assembler warnings
-Fix mini-app stubs and force no small data
Patch by Scott McNutt, 08 Jun 2006
Wolfgang Denk [Tue, 30 May 2006 21:32:44 +0000 (23:32 +0200)]
Fix PCI to memory window size problems on PM82x boards
We use the "automatic" mode that was used for the MPC8266ADS and
MPC8272 boards. Eventually this should be used on all boards?]
Patch by Wolfgang Grandegger, 17 Jan 2006
Wolfgang Denk [Tue, 30 May 2006 13:56:48 +0000 (15:56 +0200)]
* Update Intel IXP4xx support
- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006
[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
sufferes from licensing issues. Blame Intel.]
Stefan Roese [Wed, 10 May 2006 09:49:37 +0000 (11:49 +0200)]
OMAP 5912/OSK: update EMIFS CS1 timings:
Problems have been seen in the linux kernel's smc91x network driver
due to improper bus timings. The latest 2.6 OMAP kernels currently
have a workaround, but this fix belongs in u-boot.
Patch by Kevin Hilman, 13 Oct 2005
Stefan Roese [Wed, 10 May 2006 08:55:16 +0000 (10:55 +0200)]
Update omap5912osk board support
- Fix OMAP support that omap5912osk compiles in current source tree
- Update with code from "http://omap.spectrumdigital.com/osk5912"
to fix problems with DDR initialization
- Fix timer setup
- Use CFI flash driver and support complete 32MB of onboard flash
- Add "print_cpuinfo()" and "checkboard()" functions to display
CPU (with frequency) and Board infos
Patch by Stefan Roese, 10 May 2006
Heiko Schocher [Wed, 3 May 2006 06:34:03 +0000 (08:34 +0200)]
VoiceBlue update: use new MTD flash partitioning methods, use more
reasonable TEXT_BASE, update default environment and enable keyed
autoboot. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Kumar Gala [Thu, 20 Apr 2006 18:45:32 +0000 (13:45 -0500)]
Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port:
- Removed MPC8349ADS port
- Added PCI support to MPC8349ADS
- reworked memory map to allow mapping of all regions with BATs
Patch by Kumar Gala 20 Apr 2006
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Update PK1C20 board for Nios-II 5.0
Patch from Scott McNutt, 11 Aug 2005
-Update base addresses for standard configuration
-Eliminate use of CACHE_BYPASS in board code
* Add EPCS Controller bootrom work-around for Nios-II
Patch from Scott McNutt 11, Aug 2005
-When booting from an epcs controller, the epcs bootrom may leave the
slave select in an asserted state causing soft reset hang. This
patch ensures slave select is negated at reset.
Fix I/O Macros and mini-app stubs for Nios-II
Patch by Scott McNutt 11, Aug 2005
-Fix asm/io.h macros
-Eliminate use of CACHE_BYPASS in cpu code
-Eliminate assembler warnings
-Fix mini-app stubs and force no small data
Add MCF5282 support (without preloader)
relocate ichache_State to ram
u-boot can run from internal flash
Add EB+MCF-EV123 board support.
Add m68k Boards to MAKEALL
Patch from Jens Scharsig, 08 Aug 2005
Wolfgang Denk [Tue, 18 Apr 2006 09:05:03 +0000 (11:05 +0200)]
MPC5200: enable snooping of DMA transactions on XLB even if no PCI
is configured; othrwise DMA accesses aren't cache coherent which
causes for example USB to fail.
* Fix dbau1x00 Board
- Fix dbau1x00 boards broken by dbau1550 patch
PLL:s were not set for boards other than 1550.
Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
Default boot is now bootp for cards other than 1550.
Patch by Thomas Lange Aug 10 2005
projects / u-boot / log