TCL: Add board file for EVAL_SPEAr320CPU

Initial support for SPEAr320 chip and for evaluation
board named EVAL_SPEAr320CPU.

Change-Id: I85524655769bcc610294a26db47a7a399256fbb7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/231
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

TCL: Add board file for EVALSPEAr300

Initial support for SPEAr300 chip and for evaluation
board named EVALSPEAr300.
Currently supports only those parts in common with
SPEAr310.

Change-Id: I8075aa721cf3dfaac561ee51e5df4ce9a2992e3e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/230
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

TCL/SPEAr: remove code to autodetect DDR

The code to autodetect DDR was wrong and not complete.
Replaced with a parameter passed to TCL proc.
Split DDR configuration in the two cases of single and
dual DDR chip, using single chip as default.

Change-Id: If39aa518670398e8e4f207d7db6e812a49743e15
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/229
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

TCL/SPEAr: move DDR activation in common code

DDR controller activation should not be in DDR chip
specific code, but in generic DDR controller part.

Change-Id: If1b178228352b48b0097d7b9b300005fb5bb4fb6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/228
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

TCL/SPEAr: Join two initialization files.

The support for SPEAr3xx family members does not require
dedicated files for each member.
Join the initialization scripts in a single file.

Change-Id: I45e9dc64809a6f52c4592e3e0eef5529394887c6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/227
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

TCL/SPEAr: move device generic code

The initialization of RAS enable and clock is required by
all SPEAr3xx devices

Change-Id: Iea4cd0902e4da219475d7f35b4c25fc87ec6b902
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/226
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

TCL/SPEAr: move device specific code

The initialization of memory port 1 is required by
SPEAr310 only

Change-Id: I9d655da1026795f02ff2f82aed36441068cf266d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/225
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

TCL/SPEAr: Add reference to ST Application Note

ST-AN was mentioned but there was no reference

Change-Id: Ie065f8faba94d63cf391a994ec895692d499394e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/224
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

scripts: use adapter_khz not deprecated jtag_khz

Change-Id: Ibaeebf564a95360dcf21a0921ec99f5263f11915
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/202
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

usbprog: fix shadowed declaration warning

see Trac #38

Change-Id: If86fda797391f10d745384794b68e60380ef0b21
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/204
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

scripts: notify user of deprecated jtag_* functions

Change-Id: Ia97dda6918e20fb29d6e76d43856eede8fcc60dd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/203
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

libusb-1.0 support

The configuration script check for libusb-1.0 availability first and only
if not found check for libusb-0. So if both libraries are installed on the
system the build script will use libusb-1.0
It's possible to force compiling with libusb-0 with the --enable-libusb0 switch.
If the driver support only libusb0 the script check anly for it.

Change-Id: I7eb045d4e2bd553abefad53f3f4023ff46b0f5f6
Signed-off-by: Mauro Gamba <maurillo71@gmail.com>
Reviewed-on: http://openocd.zylin.com/33
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

flash: cleanup stm32f2x loader

Change-Id: I89efdc45bcd61ded437d67d4cbee4c53345d4d76
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/197
Tested-by: jenkins

Revert "build: fix gcc 4.6.2 warnings"

This reverts commit 0ef5a90d93c5a026bcf70132e60e957ae339d1e1

Causes older versions of gcc to break - need to look into a better fix.

This passed through the jenkins build as we originally did not build this module - we do now.

Change-Id: Iafeac8442b2249269ff45a52ccd3e2870920f635
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/214
Tested-by: jenkins

build: fix gcc 4.6.2 warnings

see trac #47

Change-Id: I48a3e963354dfc82209477672c2508c96fb737d6
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/198
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

presto: fix tms_sequence short issue

fix issue when using tms_sequence short

see Trac #31

Change-Id: I22a9cd2af59eae4d8a276dae60b6a99d05af53bb
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/201
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

gdb: Potential rounding error in reg_packet_size gdb_get_registers_packet

The calculation for reg_packet_size in gdb_get_registers_packet() could
generate a wrong result in the case of multiple registers whose size is
not a multiple of 8.

The current calculation sums the sizes for all registers then rounds the result
up to the next multiple of 8.

Instead it should round each register size up individually and sum the results for all registers.

Change-Id: Idfb5e5eeee0e69a6889dbe9769c0bf17feacb63b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/200
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

gdb: fix multi core gdb issue

gdb_memory_map() correctly calculates the target specific number of flash banks, but then uses the total number (all targets) instead of the target specific number to construct its GDB response, causing a crash.

Change-Id: I3f8639b3e90303a59753ebe140ce4fff96fd5db0
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/199
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

contrib: stm32f2x use std naming rules

Change-Id: I109297aa480b3474f1251571cb8e1a0baa1442fd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/195
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

flash: match stm32f2x loader src name

Change-Id: I60523f809f2d9ec9c9283e0456746ce9a63576a7
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/196
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

configuration for Freescale TWRK60N512 board

Based on the K40/Kwikstik config files

Change-Id: Icb3adc7126bacea65209b712ebaa0eb3b894372e
Signed-off-by: Tomas Frydrych <tomas@sleepfive.com>
Reviewed-on: http://openocd.zylin.com/210
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

config: do not use deprecated stm32.cfg

Change-Id: Id72d2d7f874043331ecb5586a3797d017606129e
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Signed-off-by: Felix Ruess <felix.ruess@gmail.com>
Reviewed-on: http://openocd.zylin.com/212
Tested-by: jenkins

stm32f1x: improve variable naming and avoid potential divide-by-zero

Don't call a variable num_pages if it holds the flash size. Also rearrange
flash size to num_pages calculation to avoid divide-by-zero if there will
be a device with < 1024 byte pages someday.

Change-Id: I2febea39694a2f9750de141f52ec88ae1599c086
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/211
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

bitq: make private functions static

Change-Id: I3fabbdbda4ba8ba6557d79b97444fe06f1710b58
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/209
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

bitq: reduce scope of variables

Change-Id: Ie1049b9d8ed5e44aee038e9181e423c35b4263c4
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/208
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

bitq: remove the remaining static variables

in_mask and in_idx are just another encoding of the same state information
that is already kept in bitq_in_state.bit_pos so derive them from that
instead of maintaining them separately.

Change-Id: I4ac6bbe923698a8c1090a785b8babcbb90f82931
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/207
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

stm32f1x: add more asserts

this at least checks the post conditions after convoluted code.

Change-Id: Idfa8cbedce5288d8bae5743687949f141dfb07b2
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/187
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

bitq: remove a static variable

in_buff is only ever set to field->in_value and that pointer is still
available when the parsing is restarted so it could just as well be used
directly, removing the need for the static variable.

Change-Id: I3dd7a8315ed5c5bdc3bfb74044f89492bca9816c
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/206
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

bitq: remove dead code

field->in_value is already checked so it must be non-null here, which means
the else clause can never execute so the entire buffer allocation and
handling code is completely dead.

Change-Id: Id465012a7e607349401d554fc7a8e5db7e967998
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/205
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

kinetis flash: use longword write when writing into pflash

Check whether the destination is in the program flash or NVM regions,
in the former case, use the normal longword mechanism, not the fast NVM
write.

Change-Id: I7366b7c8919928ee690252df83b99701776aee82
Signed-off-by: Tomas Frydrych <tomas@sleepfive.com>
Reviewed-on: http://openocd.zylin.com/194
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

Add Tincantools Flyswatter2 support

This is a successor to the Flyswatter cable and is very close to the original.
The new revision is based on FT2232H.

Change-Id: Icc6efcf0e4f9d8a10b65df8679b4973f6b375a9f
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: David Anders <danders@tincantools.com>
Reviewed-on: http://openocd.zylin.com/193
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

at91sam7: ensure probed flash bank has a name (fix a segfault)

Before this commit, openocd used to segfault when probing flash
of an at91sam7x512 (which contains 2 banks of flash). This was due
to the way it systematically insert a new flash bank without setting
its name.
Then, when get_flash_bank_by_name_noprobe() is called, it is doing
a strcmp() on the non-initialized bank->name.

This commit prevents allocation of second probed bank if it is already
allocated (for example, if it is set in a target config file). If a
new bank really needs to be allocated, it ensures that a default name
is set.

Change-Id: I38d15bef1fda2ec746efad37171975136cf7b371
Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-on: http://openocd.zylin.com/171
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

target: make it absolutely clear that no null pointers are accepted

there are no comments about what the rules w.r.t. null pointers
are and it is inconsistent.

It's simply a bug in the app if we ask about the properties of a null
pointer w.r.t. what kind of target it is. It's equally wrong to say
that it is an arm target as that it isn't an arm target.

Change-Id: I0925a6a5c8b38e594ffa7c3ca4390487b5e9b718
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/168
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

image: remove assignments to local variables that is never read

Change-Id: I1a5e968f165e060fd4aa7c023ad870a9e21bb5dd
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/191
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

ft2232: fix warning about assignment to local variable

variable is not read afterwards.

Change-Id: I905bbb10c596190f75494e6c6ad400a3e51843f6
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/192
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

svf: fix warnings

Change-Id: Ib7f67612db3a865f9acc5ae349455da7ddcd3348
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/177
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

ft2232: Set PWR_RST and LOOPBACK for xds100v2

The CPLD on the xds100v2 expects to see a rising edge on PWR_RST to
enable the outputs.  This patch creates that transition correctly by
fixing the direction register for PWR_RST.

THe CPLD will also loop back the data if the LOOPBACK signal is
asserted.  Set this signal to an output and keep it clear.

This was tested with a TI DM3730 Beagleboard xM.

Change-Id: I4ea216bef6ae5c40e935741af5c69dc844d5d494
Signed-off-by: Kyle Manna <kyle.manna@fuel7.com>
Reviewed-on: http://openocd.zylin.com/189
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

docs: remove berlios related info

Change-Id: I9593eb165fce51411f20fa068e324b3fd882cdb3
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/190
Tested-by: jenkins

Work around silicon bug in the SAM3 family flash waitstates

* Add flash waitstate support for Atmel SAM3 chips.
* Set default waitstates to 6, to workaround a silicon bug in the SAM3 family

This code has been tested on SAM3U4, SAM3N4 and SAM3N1

based on Change-Id: I477446f9bfb3e910ea3e2414a6e9a75beb14a214
by Jim Norris <u17263@att.net>

Change-Id: I8d360080f6968979ca5e197ad638282cadd18fb7
Signed-off-by: Attila Kinali <attila@kinali.ch>
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/128
Tested-by: jenkins

contrib: Add udev rules for TI xds100v2 debugger

This corrects permissions on the FTDI chip on the xds100v2 debugger
enabling normal users to access it.

Change-Id: I0f6618692ebdee6284eee28f9e612e68782c4d78
Signed-off-by: Kyle Manna <kyle.manna@fuel7.com>
Reviewed-on: http://openocd.zylin.com/188
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

at91sam7: fix warnings by removing dead assignments

Change-Id: I836038b3518e617291ac7d5d255a388d9486f67f
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/180
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

buspirate: add missing error propagation

found by clang.

Change-Id: I80ea8e6afc8dcc1aa7edb6f63af0d94f6781b81c
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/182
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

warning fix: remove unused variable assignment

Change-Id: I8c73b0f9a6a10734e539eedcedd79e1a34122f60
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/185
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

em357: fix warning by removing unused local variables

Change-Id: I9def63d36ed4fa8bf9cdeeedc18b1b25d0e487d6
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/184
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

usbprog: fix unecessary and confusing assignment

clang found silly code that was trivially fixed.

Change-Id: Ied6c1b254c1823cd111140cbe0c8a03d2ede65fb
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/186
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

flash: update luminary device table

add support for checking target against the device CLASS rather
then just the PARTNO.

This change also adds the new LM4F family (Blizzard).

Change-Id: Ia9d1e33f1f1c2817c0039a2232ecf932fae072f9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/161
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

arm7_9: remove warnings by reducing scope of variables

Change-Id: Idc384b733056a72108680b073da7c327a8eeedc3
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/179
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

at91sam7: add a new target config file for at91sam7x512

The main difference with at91sam7x256 is the declaration of the second
bank of flash.

Change-Id: I87a20dcbb639b797799139ccf46cc73934fa3b9e
Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-on: http://openocd.zylin.com/173
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

disassembly: fix access to undefined memory pointer upon unknown instruction

return error message instead. Found by clang.

Change-Id: Ica109d077206236a12d007e77cc78061ffd05834
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/169
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

xsvf: add missing error propagation

Change-Id: Ibc70deb980d6d18ceb376b72d9104e6180b16acf
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/176
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

dsp5680xx: fix warnings

- propagate error
- remove dead assignment

Change-Id: I0d7078f531d96e421e95f08bfd908e818500d74c
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/170
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

str9x: explain compiler that a local variable will always be initialized

Change-Id: I9ddb2793b4cdbf6acea6f69973531491e4ebcc5b
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/145
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

at91sam3: fix warnings

- reduce scope of variables
- assert on post condition to fix clang warning

Change-Id: Id91038f73a632f9688ba52c9c34eae923626e770
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/160
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

str7x: fix error propagation

stick to convention of "retval" being used as error value to
be propagated and use "flash_flags" local variable for flash
flags read from how.

Change-Id: I63f1f2248b4f4538d6cd7634ae277f7c0aadc346
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/178
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

target config files: Fix whitespace issues.

Drop useless double-space occurences, drop trailing whitespace, and fix
some other minor whitespace-related issues.

Change-Id: I6b4c515492e2ee94dc25ef1fe4f51015a4bba8b5
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/137
Tested-by: jenkins

ecos: add missing error propagation

Change-Id: Ib34815c9cf654517f22486a7c8001fdb7471338c
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/174
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

xscale: cleanup

- fix error propagation
- add some debug output for "unused" variables
- reduce scope of variable to avoid "unread" variables.

Change-Id: I136995f2a043102e64b8fff3017502fae564013b
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/175
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

warning fix: add self-consitency check to remove warning

verify promise of code that more code can be pasted with an
assert at the end condition of the code passage that builds
string.

Change-Id: I76a4e5f91b9142fff932e1493cb43c29eb6a0f80
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/143
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

cfi: fix gaffe in fixing warnings

introduced reading garbage value for arm32.

Change-Id: Ib5792a8a3207ee4db6d01d354df98c3cfabce037
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/162
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

tools: fix permissions

Change-Id: I9419138dd2972304daf215594ca917ac8eb7fcda
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>

tools: add checkpatch script

execute from openocd root dir after commiting change but before
pushing to gerrit.
tools/checkpatch.sh

This is the same script used by the jenkins build server to validate
a change.

Change-Id: Ib40d44b160e1c50a5e47ab55fc48a554381ea763
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/167
Tested-by: jenkins

etm: fix warning by removing assignment that is immediately overwritten

Change-Id: Ia3a83d3c1fc3a1707d69017fce6cf142a81babc4
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/165
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

cortex_m: initialize unused CPU variables to 0 for poll info output

fixes warnings.

Change-Id: I1a9ec09083d4e6269889fb79e6121f25e83eb396
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/163
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

dsp5680xx: add missing and broken error propagation

found by clang.

Change-Id: Ie7e2ecad71bf0838ece93727e4778ad368b890ef
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/156
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

at91sam9: fix broken error propagation

Change-Id: I3288ce6f7642e519c26dd099be888a395fe1de94
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/159
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

avr32_regs: add missing error propagation

Change-Id: Ie8b141dd534d73eccfc045069d5f628bd1eea88e
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/166
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

interface configs: Add missing URLs and names.

Also, drop author name from interface/hilscher_* files, that info is in the
git log, and none of the other files contain author names either.

Change-Id: Idf0eb4279c4bff31d15c166619c0bf8b1c5bb877
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/138
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

HACKING: all you need is http access

Change-Id: I191c1da5126c4c9ea1ff8826576b6b24feaf9881
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/157
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

checkpatch: increase line length warning to 100

Change-Id: Ief0445ea6581929b3ffdcf8bc644ce5f27b392c4
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>

tools: add checkpatch script

Change-Id: I3579028fc1c6ee8bea58c82e5f0eecba7794d7cb
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>

gdb_server: assert to avoid malloc(0)

Change-Id: I6ae3e007f4aa768f8bc64de78351750138f12e53
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/135
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

cfg: add Stellaris LM4F232 Evaluation Kit config

Change-Id: Ica754897bef6573a0738ed1afdfe1dfda07292fd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/151
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

cfg: add Blizzard class to stellaris.cfg

Change-Id: I2a1320c696b6d9b070e4a927c4cd4d68178af751
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/150
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

tx27stk5: add board init support for KaRo TX27 CPU module

This patch adds support for a KaRo TX27 CPU module on a StarterkitV base board.
The register settings have been extracted from a RedBoot distribution
that is distributed along with the hardware by KaRo.

This setup has been tested with a JTAGKey. The testing has been focussed
on loading a program into memory and start execution.
Although the flash seems to be correctly detected, no effort has been put
in testing the NAND programming yet.

Change-Id: Ib17763f1e3ecacd0eb9b5fdc32f8cba7a5e59be5
Signed-off-by: Mark Vels <mark.vels@team-embedded.nl>
Reviewed-on: http://openocd.zylin.com/158
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

fix warning: remove assigned to variable

variable is subsequently not used

Change-Id: I177d21c6ba9f1f2e3765feffdbf317ea375a8cfe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/149
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

cortex_a: add missing error propagation

found by clang.

Change-Id: I50eac219d7540fd48d3285f3f213cb659492d0c0
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/153
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

usbtoxxx: remove warning by reducing scope of variable

Change-Id: Icc3cfe601082cd83ad1c8818c1e21e7ada014150
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/154
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

arm11: print next address to debug

fixes clang warning. Basically the next address pointer is not
used for anything in the fn, except to be examined in debug.

Change-Id: I253519b8e49e54490bbe7da8ec3d2dd31f49052a
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/155
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

cortex_m: add missing error checking

found by clang.

Change-Id: I099c6fe6b044dba36c20221cb439bdcba5a6bb6f
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/152
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

target: fix null pointer exception

check if no target is selected and return error.

Change-Id: Ie8abb63c708d09572b45e88fc6766af108715077
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/148
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

flash: add Stellaris Blizzard class

Change-Id: I83f0d6edf3ab31d9fa86682f20cec77dc47ba2f6
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/146
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

target: rename cortex_m3.[ch] to cortex_m.[ch]

This rename is in preparation for cortex_m4 support.

Change-Id: Ic08c298ec6ed2aabc2c39db67191f68b3a51f550
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/147
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

warning fix: remove senseless assignment before bailing out of fn w/error

Change-Id: I822f3adce0eccb880007673d60c7eccf7d36b398
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/144
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

warnings: null pointer check fix

rewrite broken null pointer check code by reducing scope
of variable.

Change-Id: I8254f6849b187e5c9cd083053cdc11973c6fe339
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/142
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

cfi: unsupported code paths now report and return error

found by clang, would have done something undefined and mysterious
later on.

Change-Id: If7d7aca8514575d229ed0b17378bf8b1bbf347c4
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/133
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

bugfixes: tinker a bit with the targets command

return error when target can not be found instead of ERROR_OK,
split fn.

Change-Id: Iba5232d3862a490d0995c3bfece23685bd6856e3
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/131
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

dsp563xxx: fix missing error propagation found by clang

Change-Id: I7380ce145b4942e21b174f2a810928a877c32bc7
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/140
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

interface configs: Fix whitespace and other issues.

Change-Id: I98825c7fb9bdee75b69b06005ed12a3f64ec4db4
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/139
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

config files: Drop incorrect comments.

There are many "force an error till we get a good number" comments in
target/board files. This refers to the use-case where a config script
sets _CPUTAPID to 0xffffffff (which presumely gets overridden later):

 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
    # Force an error until we get a good number.
    set _CPUTAPID 0xffffffff
 }

However, the same comment was also copy-pasted in many files which do
_not_ set _CPUTAPID to 0xffffffff, where the comment doesn't make any
sense at all. Drop those comments. Also, add one missing comment, and
fix small whitespace and grammar issues.

Change-Id: Ic4ba3b5ccba87ed40cea0d6a7d66609fbdfa3c71
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/136
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

clang: fix warning by adding assert that shows that a variable is used

Change-Id: I26e0ba9f1ae9d43c9a14c42c4225746782dc4d66
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/134
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

Fixes comment typo for page size

Change-Id: I6dd8aadcecd680c48e696aeec0daf74d2addbb05
Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
Reviewed-on: http://openocd.zylin.com/132
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

bugfixes: numerous bugs in error propagation found by clang

Change-Id: I784068325b422d1918e28c08544bc5a1332d712f
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/130
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

clang: fix warning about missing check for return value

Change-Id: I0c6b6b8d1f0c30b6a503cb98df30584252bc0ee1
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/129
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

Remove use of undefined variable.

Change-Id: Id8fd345438c360b2a42857525f05360ce2794d21
Signed-off-by: Jim Norris <u17263@att.net>
Reviewed-on: http://openocd.zylin.com/127
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins

clang: fix warning about use of unitialized variable

this was a false positive, silence it.

Change-Id: I432e0c466c94cf8fd6bbf0ea153c8501a8a261eb
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/126
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

Add configuration for ATMEL SAM3N-EK board.

Change-Id: I525f6c346cace4e54f47659c5a7aceb29ee4baf2
Signed-off-by: Jim Norris <u17263@att.net>
Reviewed-on: http://openocd.zylin.com/125
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

Add configuration for ATMEL SAM3N series.

Change-Id: Iac498ab37e59127b989f29a1c4167ab29d625b05
Signed-off-by: Jim Norris <u17263@att.net>
Reviewed-on: http://openocd.zylin.com/124
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

stm3220g_eval.cfg: fix CHIPNAME.

The STM3220G-EVAL board has an STM32F207IGH6. ("...H6", not "...T6").

Change-Id: Iaf3dae6830c5c0685a1dcd1588d391434bc51be7
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
Reviewed-on: http://openocd.zylin.com/120
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

armv7a: fix scan-build warnings

"Value stored to 'retval' is never read": Check and propagate error
"Dereference of null pointer": Probably bogus, maybe triggered by the null
check on armv7a, so remove the check since it can't be null anyway.

Change-Id: I3bc44e52af1589ff40e6a42deda0ce7f3a25e397
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/119
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

armv7a: make local functions static

Also fix a spelling error and remove the declaration for a non-existent
function from the header.

Change-Id: I13177e2d81aa167c05c1cc766f06924211e6d735
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/118
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>