]> git.sur5r.net Git - u-boot/log
u-boot
15 years agoppc4xx: DU405 maintenance fix
Matthias Fuchs [Fri, 20 Feb 2009 09:19:15 +0000 (10:19 +0100)]
ppc4xx: DU405 maintenance fix

-strip unused features
-fix resetting phy

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
15 years agoppc4xx: Abort autoboot only by space key on CPCI405 boards
Matthias Fuchs [Fri, 20 Feb 2009 09:19:14 +0000 (10:19 +0100)]
ppc4xx: Abort autoboot only by space key on CPCI405 boards

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
15 years agoAdd basic relocation to i386 port
Graeme Russ [Tue, 24 Feb 2009 10:14:56 +0000 (21:14 +1100)]
Add basic relocation to i386 port

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
15 years agoImplement SC520 timers
Graeme Russ [Tue, 24 Feb 2009 10:14:45 +0000 (21:14 +1100)]
Implement SC520 timers

Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
15 years agoFactor out SC520 sub-features
Graeme Russ [Tue, 24 Feb 2009 10:14:32 +0000 (21:14 +1100)]
Factor out SC520 sub-features

Moved sub-features of the SC520 code which is currently selectively compiled
using #ifdef out of sc520.c into individual files selectively compiled via
the makefile

Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
15 years agoRewrite i386 interrupt handling
Graeme Russ [Tue, 24 Feb 2009 10:13:40 +0000 (21:13 +1100)]
Rewrite i386 interrupt handling

Rewrite interrupt handling functionality for the i386 port. Separated
functionality into separate CPU and Architecture components.

It appears as if the i386 interrupt handler functionality was intended
to allow multiple handlers to be installed for a given interrupt.
Unfortunately, this functionality was not fully implemented and also
had the problem that irq_free_handler() does not allow the passing
of the handler function pointer and therefore could never be used to
free specific handlers that had been installed for a given IRQ.

There were also various issues with array bounds not being fully
tested.

I had two objectives in mind for the new implementation:

1) Keep the implementation as similar as possible to existing
   implementations. To that end, I have used the leon2/3
   implementations as the reference

2) Seperate CPU and Architecture specific elements. All specific i386
   interrupt functionality is now in cpu/i386/ with the high level
   API and architecture specific code in lib_i386. Functionality
   specific to the PC/AT architecture (i.e. cascaded i8259 PICs) has
   been further split out into an individual file to allow for the
   implementation of the PIC architecture of the SC520 CPU (supports
   more IRQs)

Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
15 years agoMove ali512x.h
Graeme Russ [Tue, 24 Feb 2009 10:12:35 +0000 (21:12 +1100)]
Move ali512x.h

Moved ali512x.h from include/asm-i386/ic/ to /include

Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
15 years agoRename SC520 Configuration Options
Graeme Russ [Tue, 24 Feb 2009 10:12:20 +0000 (21:12 +1100)]
Rename SC520 Configuration Options

Options are now all uniformly CONFIG_SYS_SC520_<option>

Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
15 years agoFix all linker script to handle all rodata sections
Trent Piepho [Wed, 18 Feb 2009 23:22:05 +0000 (15:22 -0800)]
Fix all linker script to handle all rodata sections

A recent gcc added a new unaligned rodata section called '.rodata.str1.1',
which needs to be added the the linker script.  Instead of just adding this
one section, we use a wildcard ".rodata*" to get all rodata linker section
gcc has now and might add in the future.

However, '*(.rodata*)' by itself will result in sub-optimal section
ordering.  The sections will be sorted by object file, which causes extra
padding between the unaligned rodata.str.1.1 of one object file and the
aligned rodata of the next object file.  This is easy to fix by using the
SORT_BY_ALIGNMENT command.

This patch has not be tested one most of the boards modified.  Some boards
have a linker script that looks something like this:

*(.text)
. = ALIGN(16);
*(.rodata)
*(.rodata.str1.4)
*(.eh_frame)

I change this to:

*(.text)
. = ALIGN(16);
*(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))

This means the start of rodata will no longer be 16 bytes aligned.
However, the boundary between text and rodata/eh_frame is still aligned to
16 bytes, which is what I think the real purpose of the ALIGN call is.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
15 years agoremove bi_enet*addr from global data for all arches
Mike Frysinger [Wed, 11 Feb 2009 23:26:08 +0000 (18:26 -0500)]
remove bi_enet*addr from global data for all arches

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Daniel Hellstrom <daniel@gaisler.com>
CC: Michal Simek <monstr@seznam.cz>
CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
CC: Scott McNutt <smcnutt@psyent.com>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15 years agoppc: mark global bi_enet*addr as legacy
Mike Frysinger [Thu, 12 Feb 2009 01:07:19 +0000 (20:07 -0500)]
ppc: mark global bi_enet*addr as legacy

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

In the ppc case, these things are part of the legacy ABI, so keep them
around but mark them as legacy so no new code will touch them.

Also stop calling load_sernum_ethaddr() since all boards now implement
this as a stub.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agoboards: get mac address from env and move load_sernum_ethaddr() to board init
Mike Frysinger [Thu, 12 Feb 2009 01:09:52 +0000 (20:09 -0500)]
boards: get mac address from env and move load_sernum_ethaddr() to board init

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

Rather than have common ppc code call a board-specific function like
load_sernum_ethaddr(), have each board call it in its own board-specific
misc_init_r() function.

The boards that get converted here are:
- kup4k/kup4x
- pcs440ep
- tqm8xx

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Stefan Roese <sr@denx.de>
15 years agocmc_pu2: get mac address from environment
Mike Frysinger [Thu, 12 Feb 2009 00:55:01 +0000 (19:55 -0500)]
cmc_pu2: get mac address from environment

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

Also rename load_sernum_ethaddr() to misc_init_r() so we don't need to
handle this board specially in common ARM code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agoboards: move board_get_enetaddr() into board-specific init
Mike Frysinger [Mon, 16 Feb 2009 23:03:14 +0000 (18:03 -0500)]
boards: move board_get_enetaddr() into board-specific init

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

Rather than have the common ppc code have board-specific hooks, move the
board_get_enetaddr() function into the board-specific init functions.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agoarm: get mac address from environment
Mike Frysinger [Thu, 12 Feb 2009 00:39:55 +0000 (19:39 -0500)]
arm: get mac address from environment

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

Some warts are remaining and should be killed off (by moving the func to
the appropriate board init code):
- davinci_eth_set_mac_addr
- cs8900_get_enetaddr
- smc_set_mac_addr

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agonx823: get mac address from environment
Mike Frysinger [Thu, 12 Feb 2009 00:36:20 +0000 (19:36 -0500)]
nx823: get mac address from environment

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

For the nx823, the serial number is moved out of load_sernum_ethaddr() and
into misc_init_r() as is the env setup.  This lets us kill off the former
function in the process.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agolib_*/board.c: do not initialize bi_enet*addr in global data
Mike Frysinger [Wed, 11 Feb 2009 23:27:18 +0000 (18:27 -0500)]
lib_*/board.c: do not initialize bi_enet*addr in global data

Since everyone is using the environment for mac address storage, there is
no point in seeding the global data.

The arches that are converted here:
i386
m68k
microblaze
mips
nios
nios2
sh
sparc

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Daniel Hellstrom <daniel@gaisler.com>
CC: Michal Simek <monstr@seznam.cz>
CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
CC: Scott McNutt <smcnutt@psyent.com>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15 years agonpe: get mac address from environment
Mike Frysinger [Thu, 12 Feb 2009 00:19:54 +0000 (19:19 -0500)]
npe: get mac address from environment

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

The resulting code can also be simplified even further.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Stefan Roese <sr@denx.de>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agocpu/: get mac address from environment
Mike Frysinger [Thu, 12 Feb 2009 00:18:41 +0000 (19:18 -0500)]
cpu/: get mac address from environment

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

The cpus that get converted here:
at91rm9200
mpc512x
mpc5xxx
mpc8260
mpc8xx
ppc4xx

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: John Rigby <jrigby@freescale.com>
CC: Stefan Roese <sr@denx.de>
15 years agolan91c96/smc91111/smc911x: get mac address from environment
Mike Frysinger [Thu, 12 Feb 2009 00:09:54 +0000 (19:09 -0500)]
lan91c96/smc91111/smc911x: get mac address from environment

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

Also, do not bother checking the EEPROM if the env is setup.  This
simplifies the code greatly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Wolfgang Dnek <wd@denx.de>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Rolf Offermanns <rof@sysgo.de>
CC: Erik Stahlman <erik@vt.edu>
CC: Daris A Nevil <dnevil@snmc.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
15 years agosh_eth: get mac address from environment
Mike Frysinger [Thu, 12 Feb 2009 00:14:09 +0000 (19:14 -0500)]
sh_eth: get mac address from environment

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

The sh_eth driver can also be simplified a bit by using enetaddr member of
the eth_device structure.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Carlos Munoz <carlos@kenati.com>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agocs8900: get mac address from environment
Mike Frysinger [Thu, 12 Feb 2009 00:06:09 +0000 (19:06 -0500)]
cs8900: get mac address from environment

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

The cs8900 driver also changes slightly in that the hardware is not
consulted if the mac address in the env is sane.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Marius Groeger <mgroeger@sysgo.de>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agobcm570x: get mac address from environment
Mike Frysinger [Thu, 12 Feb 2009 00:04:25 +0000 (19:04 -0500)]
bcm570x: get mac address from environment

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

Since the address is in the PLM_DEVICE_BLOCK structure already, there is
no need to pass the NodeAddress as a second parameter.  So drop the second
argument to the LM_SetMacAddress() function (and update the tigon3 driver
accordingly).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agodrivers/net/: get mac address from environment
Mike Frysinger [Thu, 12 Feb 2009 00:01:26 +0000 (19:01 -0500)]
drivers/net/: get mac address from environment

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

The drivers that get converted here:
3c589
4xx_enet
dc2114x
dm9000x
enc28j60
fsl_mcdmafec
ks8695eth
mcffec
rtl8019
rtl8169
s3c4510b_eth
xilinx_emac
xilinx_emaclite

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Rolf Offermanns <rof@sysgo.de>
CC: Stefan Roese <sr@denx.de>
CC: Sascha Hauer <saschahauer@web.de>
CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
CC: Greg Ungerer <greg.ungerer@opengear.com>
CC: Xue Ligong <lgxue@hotmail.com>
CC: Masami Komiya <mkomiya@sonare.it>
CC: Curt Brune <curt@cucy.com>
CC: Michal SIMEK <monstr@monstr.eu>
15 years agoboards: get mac address from environment
Mike Frysinger [Wed, 11 Feb 2009 23:38:38 +0000 (18:38 -0500)]
boards: get mac address from environment

The boards that get converted here to use the environment for the mac
address rather than global data:
debris
mgcoge
mgsuvd
muas3001
netstal
pn62
sixnet
vcma9
xilinx (the ones that use xilinx_enet)

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Sangmoon Kim <dogoil@etinsys.com>
CC: Heiko Schocher <hs@denx.de>
CC: David Mueller <d.mueller@elsoft.ch>
CC: Niklaus Giger <niklaus.giger@netstal.com>
CC: Wolfgang Grandegger <wg@denx.de>
CC: Dave Ellis <DGE@sixnetio.com>
CC: Ricardo Ribalda <ricardo.ribalda@uam.es>
15 years agoAmigaOneG3SE/enet: get mac address from environment
Mike Frysinger [Wed, 11 Feb 2009 23:36:45 +0000 (18:36 -0500)]
AmigaOneG3SE/enet: get mac address from environment

Always use the MAC address that is stored in the environment first before
falling back to the ROM.  This also cuts out any comparison steps: if the
mac in the env is sane, the ROM is never consulted.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Thomas Frieden <ThomasF@hyperion-entertainment.com>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agonvedit: do not update global bi_enetaddr and do not call eth_set_enetaddr()
Mike Frysinger [Wed, 11 Feb 2009 23:52:38 +0000 (18:52 -0500)]
nvedit: do not update global bi_enetaddr and do not call eth_set_enetaddr()

Since the ethernet layer handles updating of device addresses itself from
the environment, there is no point in calling eth_set_enetaddr().

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agolynxkdi: get mac address from environment
Mike Frysinger [Wed, 11 Feb 2009 23:54:07 +0000 (18:54 -0500)]
lynxkdi: get mac address from environment

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agobootvx: get mac address from environment
Mike Frysinger [Wed, 11 Feb 2009 23:51:43 +0000 (18:51 -0500)]
bootvx: get mac address from environment

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Niklaus Giger <niklaus.giger@member.fsf.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agobdinfo: get mac address from environment
Mike Frysinger [Wed, 11 Feb 2009 23:50:10 +0000 (18:50 -0500)]
bdinfo: get mac address from environment

Add a new print_eth() function to automate the eth*addr env var acquisition
and display.  Affects all arches.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Scott McNutt <smcnutt@psyent.com>
CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
CC: Michal Simek <monstr@seznam.cz>
CC: Daniel Hellstrom <daniel@gaisler.com>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agonet: get mac address from environment and use eth util funcs
Mike Frysinger [Wed, 11 Feb 2009 23:23:48 +0000 (18:23 -0500)]
net: get mac address from environment and use eth util funcs

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agoBlackfin: bfin_mac: force boards to setup the MAC themselves
Mike Frysinger [Mon, 13 Oct 2008 19:06:25 +0000 (15:06 -0400)]
Blackfin: bfin_mac: force boards to setup the MAC themselves

Since the on-chip MAC does not have an eeprom or similar interface, force
all Blackfin boards that use this driver to setup the board data with a
proper MAC.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agodoc/README.enetaddr: document proper MAC usage
Mike Frysinger [Wed, 11 Feb 2009 19:12:34 +0000 (14:12 -0500)]
doc/README.enetaddr: document proper MAC usage

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agonet: new utility functions for working with enetaddr's
Mike Frysinger [Fri, 30 Jan 2009 00:43:44 +0000 (19:43 -0500)]
net: new utility functions for working with enetaddr's

Declare new utility functions for converting between the environment
variables (eth*addr) and the binary MAC address representation.  This way
we can unify all the random places that already do this kind of thing.

The functions in question:
eth_parse_enetaddr - "..." -> {...}
eth_getenv_enetaddr - env -> {...}
eth_setenv_enetaddr - {...} -> env

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agoconvert print_IPaddr() to %pI4
Mike Frysinger [Tue, 17 Feb 2009 05:00:53 +0000 (00:00 -0500)]
convert print_IPaddr() to %pI4

Now that our printf functions support the %pI4 modifier like the kernel,
let's drop the inflexible print_IPaddr() function and covert over to the
%pI4 modifier.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agovsprintf: pull updates from Linux kernel
Mike Frysinger [Tue, 17 Feb 2009 04:21:36 +0000 (23:21 -0500)]
vsprintf: pull updates from Linux kernel

This brings in support for the %p modifier which allows us to easily print
out things like ip addresses, mac addresses, and pointers.

It also converts the rarely used 'q' length modifier to the common 'L'
modifier when dealing with quad types.

While this new code is a bit larger (~1k .text), most of it should be made
up by converting the existing ip/mac address code to use format modifiers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15 years ago.gitignore for generated files in api_examples directory
Jon Smirl [Fri, 20 Mar 2009 03:04:18 +0000 (23:04 -0400)]
.gitignore for generated files in api_examples directory

Add .gitignore for generated files in api_examples directory

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
15 years agonet: sh_eth: Remove sh_eth_reset() from halt function
Nobuhiro Iwamatsu [Wed, 18 Mar 2009 03:27:04 +0000 (12:27 +0900)]
net: sh_eth: Remove sh_eth_reset() from halt function

sh_eth_reset is function to reset Ether IP.
The MAC address is stored in IP, but it is initialized by this function.
OS (e.g. Linux Kernel) can not use this device when initialized.
This revises this problem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15 years agoppc4xx: Fix bug in PCI outbound map configuration for canyonlands
Anatolij Gustschin [Fri, 20 Mar 2009 11:45:50 +0000 (12:45 +0100)]
ppc4xx: Fix bug in PCI outbound map configuration for canyonlands

PCI outbound address map configuration doesn't match the
PCI memory address range covered by appropriate TLB entry
configuration for canyonlands causing machine check
exceptions while accessing PCI memory regions. This patch
provides a fix for this issue.

Kazuaki Ichinohe observed and reported this issue while
testing display output with PCI ATI video card on canyonlands.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
15 years agoCFI: geometry reversal for STMicro M29W320DT
Richard Retanubun [Fri, 6 Mar 2009 15:09:37 +0000 (10:09 -0500)]
CFI: geometry reversal for STMicro M29W320DT

Follow up to the flash_fixup_stm to fix geometry reversal
on STMicro M29W320ET flash chip. The M29W320DT has 4 erase region.

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Stefan Roese <sr@denx.de>
15 years agosmc911x_eeprom: update register API
Mike Frysinger [Wed, 25 Feb 2009 22:29:40 +0000 (17:29 -0500)]
smc911x_eeprom: update register API

The smc911x driver changed the naming convention for its register funcs,
so update the eeprom code accordingly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
15 years agompc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c
Grzegorz Bernacki [Tue, 17 Mar 2009 09:06:39 +0000 (10:06 +0100)]
mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c

Total5200 and digsy MTC use I2C port 2 pins as a ATA chip select.
To avoid adding board-specific ifdefs to cpu/mpc5xxx/ide.c new
define CONFIG_SYS_ATA_CS_ON_I2C2 was introduced. It is used by
Total5200 and will be used by digsy MTC and other boards with
ATA CS on I2C pins.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
15 years ago8xx: add support for new keymile kmsupx4 board.
Heiko Schocher [Thu, 12 Mar 2009 06:37:34 +0000 (07:37 +0100)]
8xx: add support for new keymile kmsupx4 board.

This patch adds support for the kmsupx4 board from Keymile,
based on a Freescale MPC852T CPU

- serial console on SMC1
- 32 MB SDRAM
- 32 MB NOR Flash
- Ethernet over SCC3
- I2C Bitbang

Signed-off-by: Heiko Schocher <hs@denx.de>
15 years ago8xx, mgsuvd: rename board to a more generic name
Heiko Schocher [Thu, 12 Mar 2009 06:37:28 +0000 (07:37 +0100)]
8xx, mgsuvd: rename board to a more generic name

renaming the "mgsuvd" board port into "km8xx", because
there come more similar boards from keymile.
Compiling the mgsuvd board with "make mgsuvd_config"
remains.

Signed-off-by: Heiko Schocher <hs@denx.de>
15 years ago8xx, mgsuvd: Coding Style cleanup config file
Heiko Schocher [Thu, 12 Mar 2009 06:37:23 +0000 (07:37 +0100)]
8xx, mgsuvd: Coding Style cleanup config file

Signed-off-by: Heiko Schocher <hs@denx.de>
15 years agopowerpc: common updates for keymile boards
Heiko Schocher [Thu, 12 Mar 2009 06:37:18 +0000 (07:37 +0100)]
powerpc: common updates for keymile boards

- added to keymile-common.h:
  - bootcount support
  - COMMAND HISTORY
  - CONFIG_AUTO_COMPLETE
  - CONFIG_SYS_FLASH_PROTECTION
  - JFFS2 support
  - CONFIG_VERSION_VARIABLE
- extracted common I2C settings for all boards
- common default environment settings summarized

Signed-off-by: Heiko Schocher <hs@denx.de>
15 years ago8xx, icache: enabling ICache not before running from RAM
Heiko Schocher [Thu, 12 Mar 2009 06:37:15 +0000 (07:37 +0100)]
8xx, icache: enabling ICache not before running from RAM

with the new CONFIG_SYS_DELAYED_ICACHE config option, ICache
is not enabled before code runs from RAM.

Signed-off-by: Heiko Schocher <hs@denx.de>
15 years ago82xx, mgcoge: fix environment sector size
Heiko Schocher [Thu, 12 Mar 2009 06:37:11 +0000 (07:37 +0100)]
82xx, mgcoge: fix environment sector size

Size of one environment sector is 0x20000.

Signed-off-by: Heiko Schocher <hs@denx.de>
15 years agoNetStar: config reindentation
Ladislav Michl [Mon, 16 Mar 2009 22:27:31 +0000 (23:27 +0100)]
NetStar: config reindentation

Fix indentation broken by symbol renames. "Sort" driver related definitons.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
15 years agoMerge branch 'master' of git://git.denx.de/u-boot-coldfire
Wolfgang Denk [Tue, 17 Mar 2009 23:40:57 +0000 (00:40 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-coldfire

15 years agoMerge branch 'master' of git://git.denx.de/u-boot-nand-flash
Wolfgang Denk [Tue, 17 Mar 2009 23:39:10 +0000 (00:39 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

15 years agoColdFire: Fix incorrect definition
TsiChung Liew [Tue, 17 Mar 2009 11:21:43 +0000 (11:21 +0000)]
ColdFire: Fix incorrect definition

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15 years agoColdFire: Fix M5329EVB and M5373EVB nand issue
TsiChung Liew [Mon, 2 Mar 2009 19:16:45 +0000 (19:16 +0000)]
ColdFire: Fix M5329EVB and M5373EVB nand issue

The Nand flash was unable to read and write properly
due to Nand Chip Select (nCE) setup was in reverse
order. Also, increase the Nand time out value to 60.

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15 years agoColdFire: PLATFORM_CPPFLAGS updates for new compiler
TsiChung Liew [Tue, 27 Jan 2009 15:19:35 +0000 (15:19 +0000)]
ColdFire: PLATFORM_CPPFLAGS updates for new compiler

Update PLATFORM_CPPFLAGS to accept 4.3.x version of
ColdFire compiler.

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15 years agoColdFire: Provide gzip image size V2 & V3 platforms
TsiChung Liew [Tue, 27 Jan 2009 12:57:47 +0000 (12:57 +0000)]
ColdFire: Provide gzip image size V2 & V3 platforms

Default gzip bootm size is 8MB. Some platforms require
more than 8MB

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15 years agoColdFire: Fix M54451 serial boot dram setup
TsiChung Liew [Wed, 18 Feb 2009 11:49:31 +0000 (11:49 +0000)]
ColdFire: Fix M54451 serial boot dram setup

The serial boot dram extended/standard mode register was not
setup and was using default DRAM setup causing the U-boot was
unstable to boot up in serial mode.

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15 years agoColdfire: XL Bus minor fixes
arun c [Thu, 4 Dec 2008 10:27:15 +0000 (15:57 +0530)]
Coldfire: XL Bus minor fixes

According to coldfire manual data timeout > address time out
also use correct macro to program XARB_CFG

Signed-off-by: Arun C <arunedarath@mistralsolutions.com>
15 years agoNAND: Have nboot accept .e and .i as legacy no-ops.
Scott Wood [Tue, 17 Mar 2009 17:06:04 +0000 (12:06 -0500)]
NAND: Have nboot accept .e and .i as legacy no-ops.

This was intended to happen before, but a trivial bug prevented it.

Signed-off-by: Scott Wood <scottwood@freescale.com>
15 years agoNAND: Make nboot skip bad blocks
Ladislav Michl [Fri, 13 Mar 2009 13:38:19 +0000 (14:38 +0100)]
NAND: Make nboot skip bad blocks

nboot command currently does not skip bad blocks and gives read error when
loading image stored over bad block. With patch applied, nboot works as
expected:

Device 0 bad blocks:
  00780000
  014a0000
  02000000
  02cc0000
  04aa0000

Loading from NAND 128MiB 3,3V 8-bit, offset 0x2c00000
   Image Name:   Linux-2.6.22-omap1
   Created:      2008-11-20  23:44:32 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1052520 Bytes =  1 MB
   Load Address: 10008000
   Entry Point:  10008000
Skipping bad block 0x02cc0000
Automatic boot of image at addr 0x10400000 ...
...

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
15 years agoppc4xx: lwmon5: Only use one CS (rank) in DDR2 configuration
Stefan Roese [Thu, 12 Mar 2009 06:27:25 +0000 (07:27 +0100)]
ppc4xx: lwmon5: Only use one CS (rank) in DDR2 configuration

This patch fixes a problem spotted by Mikhail Zolotaryov on Sequoia with
the DDR2 configuration to only use one CS (rank). As this code is most
likely copied from the original Sequoia version, this error was copied
as well.

This patch also removes some dead code.

Signed-off-by: Stefan Roese <sr@denx.de>
15 years agoppc4xx: PMC440: Only use one CS (rank) in DDR2 configuration
Stefan Roese [Thu, 12 Mar 2009 06:24:40 +0000 (07:24 +0100)]
ppc4xx: PMC440: Only use one CS (rank) in DDR2 configuration

This patch fixes a problem spotted by Mikhail Zolotaryov on Sequoia with
the DDR2 configuration to only use one CS (rank). As this code is most
likely copied from the original Sequoia version, this error was copied
as well.

Signed-off-by: Stefan Roese <sr@denx.de>
15 years agoFix AMCC Sequoia board DDR memory configuration
Mikhail Zolotaryov [Wed, 11 Mar 2009 08:54:46 +0000 (10:54 +0200)]
Fix AMCC Sequoia board DDR memory configuration

Sequoia board schematics (DES0211_11_SCH_11.pdf, page 5, unit U1D)
specifies that BankSel#1 is not connected, while bootloader memory
configuration is (board/amcc/sequoia/sdram.c):
       mtsdram(DDR0_10, 0x00000300);
i.e. both Chip Selects used - not correct.

If we change to correct value here:
       mtsdram(DDR0_10, 0x00000100);
memory is accessible OK also.

Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua>
Signed-off-by: Stefan Roese <sr@denx.de>
15 years agoPrepare 2009.03-rc2 v2009.03-rc2
Wolfgang Denk [Sun, 15 Mar 2009 21:40:09 +0000 (22:40 +0100)]
Prepare 2009.03-rc2

Update CHANEGLOG, fix minor coding style issue.

Signed-off-by: Wolfgang Denk <wd@denx.de>
15 years agoMerge branch 'master' of git://git.denx.de/u-boot-sh
Wolfgang Denk [Sun, 15 Mar 2009 21:15:13 +0000 (22:15 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-sh

15 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc83xx
Wolfgang Denk [Sun, 15 Mar 2009 21:12:10 +0000 (22:12 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

15 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Sun, 15 Mar 2009 21:09:18 +0000 (22:09 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

15 years agoMerge branch 'master' of git://git.denx.de/u-boot-pxa
Wolfgang Denk [Sun, 15 Mar 2009 21:08:07 +0000 (22:08 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-pxa

15 years agompc83xx: Add bank configuration to FSL spd_sdram.c
Jerry Van Baren [Fri, 13 Mar 2009 15:40:10 +0000 (11:40 -0400)]
mpc83xx: Add bank configuration to FSL spd_sdram.c

The routine assumed 4 bank SDRAMs, enhance to configure for 4 or 8
bank SDRAMs.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Acked-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15 years agompc83xx: correctly set encryption and I2C bus 0 clock
Norbert van Bolhuis [Fri, 13 Mar 2009 07:58:14 +0000 (08:58 +0100)]
mpc83xx: correctly set encryption and I2C bus 0 clock

This patch makes sure the correct mask is applied when setting
the encryption and I2C bus 0 clock in SCCR.
Failing to do so may lead to ENCCM being 0 in which case I2C bus 0
won't function.

Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15 years agoOMAP3: Add support for OMAP3 die ID
Dirk Behme [Thu, 12 Mar 2009 18:30:50 +0000 (19:30 +0100)]
OMAP3: Add support for OMAP3 die ID

Read and store OMAP3 die ID in U-Boot environment.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
15 years agoMPC5200 FEC MII speed register
Jon Smirl [Wed, 11 Mar 2009 19:08:56 +0000 (15:08 -0400)]
MPC5200 FEC MII speed register

Set a non-zero speed in the MII register so that MII commands will work.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
15 years agosh: ap325rxa: Change the wait cycle in the area 5
Yusuke.Goda [Fri, 13 Mar 2009 07:08:18 +0000 (16:08 +0900)]
sh: ap325rxa: Change the wait cycle in the area 5

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15 years agosh: Fix cannot work rtl8139 on r2dplus
Yoshihiro Shimoda [Wed, 25 Feb 2009 07:04:26 +0000 (16:04 +0900)]
sh: Fix cannot work rtl8139 on r2dplus

The rtl8139 driver use pci_mem_to_phys. So it need PCI system memory
registration.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15 years agosh: Add netdev header fixing of warning/build
Nobuhiro Iwamatsu [Fri, 27 Feb 2009 09:35:41 +0000 (18:35 +0900)]
sh: Add netdev header fixing of warning/build

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15 years agosh: Add support 32-Bit Extended Address Mode to sh7785lcr
Yoshihiro Shimoda [Tue, 3 Mar 2009 06:11:17 +0000 (15:11 +0900)]
sh: Add support 32-Bit Extended Address Mode to sh7785lcr

We can built 'make sh7785lcr_32bit_config'. And add new command "pmb"
for this mode. This command changes PMB for using 512MB system memory.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15 years agosh: Add some register value configurable to PCI of SH7780
Yoshihiro Shimoda [Wed, 25 Feb 2009 05:26:42 +0000 (14:26 +0900)]
sh: Add some register value configurable to PCI of SH7780

Some register value was hardcoded for System memory size 128MB and
memory offset 0x08000000. This patch fixed the problem.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15 years agosh: Add system memory registration to PCI for SH4
Yoshihiro Shimoda [Wed, 25 Feb 2009 05:26:52 +0000 (14:26 +0900)]
sh: Add system memory registration to PCI for SH4

It is necessary for some pci device driver.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15 years agosh: Add value for PCI system memory registration of sh7785lcr
Yoshihiro Shimoda [Wed, 25 Feb 2009 05:26:55 +0000 (14:26 +0900)]
sh: Add value for PCI system memory registration of sh7785lcr

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15 years agosh: Add macros for SH-4A 32-Bit Address Extended Mode
Yoshihiro Shimoda [Tue, 3 Mar 2009 06:11:08 +0000 (15:11 +0900)]
sh: Add macros for SH-4A 32-Bit Address Extended Mode

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15 years agosh: use write{8,16,32} in ms7720se lowlevel_init
Nobuhiro Iwamatsu [Tue, 3 Feb 2009 04:35:05 +0000 (13:35 +0900)]
sh: use write{8,16,32} in ms7720se lowlevel_init

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Wolfgang Denk [Tue, 10 Mar 2009 21:04:04 +0000 (22:04 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

15 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc83xx
Wolfgang Denk [Tue, 10 Mar 2009 21:01:38 +0000 (22:01 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

15 years agotsec: report when there is no vendor specific PHY support
Paul Gortmaker [Mon, 9 Mar 2009 23:07:53 +0000 (18:07 -0500)]
tsec: report when there is no vendor specific PHY support

Commit af1c2b84 added a generic phy support, with an ID of zero
and a 32 bit mask; meaning that it will match on any PHY ID.

The problem is that there is a test that checked if a matching
PHY was found, and if not, it printed the non-matching ID.
But since there will always be a match (on the generic PHY,
worst case), this test will never trip.

In the case of a misconfigured PHY address, or of a PHY that
isn't explicitly supported outside of the generic support,
you will never see the ID of 0xffffffff, or the ID of the
real (but unsupported) chip.  It will silently fall through
onto the generic support.

This change makes that test useful again, and ensures that
the selection of generic PHY support doesn't happen without
some sort of notice.  It also makes it explicitly clear that
the generic PHY must be last in the PHY table.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Andy Fleming <afleming@freescale.com>
15 years agoSIMPC8313 board: fix out of tree building.
Wolfgang Denk [Mon, 9 Mar 2009 09:53:05 +0000 (10:53 +0100)]
SIMPC8313 board: fix out of tree building.

Fix typo in makefile which broke out of tree builds.

Also use expolicit "rm" instead of "ln -sf" which is known to be
unreliable.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15 years agoAdd eTSEC 1/2 IO override control (corrected)
ksi@koi8.net [Mon, 23 Feb 2009 18:53:13 +0000 (10:53 -0800)]
Add eTSEC 1/2 IO override control (corrected)

This adds tsec12ioovcr to include/asm-ppc/immap_85xx.h (was reserved.)

Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
15 years agofsl: Remove unnecessary debug printfs
Andy Fleming [Sat, 7 Mar 2009 01:05:52 +0000 (19:05 -0600)]
fsl: Remove unnecessary debug printfs

These were left in accidentally, and are not really useful unless the
code is as broken as it was when it was being developed.

Signed-off-by: Andy Fleming <afleming@freescale.com>
15 years agoFix mpc85xx ddr-gen3 ddr_sdram_cfg.
Ed Swarthout [Tue, 24 Feb 2009 08:37:59 +0000 (02:37 -0600)]
Fix mpc85xx ddr-gen3 ddr_sdram_cfg.

Commit e1be0d25, "32bit BUg fix for DDR2 on 8572" prevented other
sdram_cfg bits (such as ecc and self_refresh_in_sleep) from being set.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15 years agoPXA: timer use do_div and simplify it
Jean-Christophe PLAGNIOL-VILLARD [Tue, 24 Feb 2009 05:13:10 +0000 (06:13 +0100)]
PXA: timer use do_div and simplify it

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15 years agoSIMPC8313 board: fix out of tree building.
Wolfgang Denk [Mon, 9 Mar 2009 09:51:39 +0000 (10:51 +0100)]
SIMPC8313 board: fix out of tree building.

Fix typo in makefile which broke out of tree builds.

Also use expolicit "rm" instead of "ln -sf" which is known to be
unreliable.

Signed-off-by: Wolfgang Denk <wd@denx.de>
15 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc83xx
Wolfgang Denk [Sun, 8 Mar 2009 23:41:48 +0000 (00:41 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

Conflicts:
lib_ppc/board.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
15 years ago8360, kmeter1: added bootcount feature.
Heiko Schocher [Tue, 24 Feb 2009 10:30:51 +0000 (11:30 +0100)]
8360, kmeter1: added bootcount feature.

add CONFIG_BOOTCOUNT_LIMIT feature for 8360 CPU.

The bootcounter uses 8 bytes from the muram,
because no other memory was found on this
CPU for the bootcount feature. So we must
correct the muram size in DTS before booting
Linux.

This feature is actual only implemented for
MPC8360, because not all 83xx CPU have qe,
and therefore no muram, which this feature
uses.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15 years ago83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
Heiko Schocher [Tue, 24 Feb 2009 10:30:48 +0000 (11:30 +0100)]
83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1

old code implemented the QE_ENET10 errata only for Silicon
Revision 2.0. New code reads now the Silicon Revision
register and sets dependend on the Silicon Revision the
values as advised in the QE_ENET10 errata.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15 years ago83xx, kmeter1: updates for 2009.03
Heiko Schocher [Tue, 24 Feb 2009 10:30:44 +0000 (11:30 +0100)]
83xx, kmeter1: updates for 2009.03

- HRCW update
  HRCWH_BOOTSEQ_DISABLE not HRCWH_BOOTSEQ_NORMAL
  HRCWH_LALE_EARLY added
- DDR-SDRAM settings modified. This solves sporadically
  problems with this memory.
- CS1 now 128 MB window size
- CS3 now 512 MB window size
- PRAM activated
- MTDPARTS_DEFAULT defined
- CONFIG_HOSTNAME added
- MONITOR_LEN now 384 KB

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15 years ago83xx, kmeter1: autodetect size of DDR II RAM
Heiko Schocher [Tue, 24 Feb 2009 10:30:40 +0000 (11:30 +0100)]
83xx, kmeter1: autodetect size of DDR II RAM

it is possible that some board variants have different DDR II
RAM sizes. So we autodetect the size of the assembled RAM.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15 years ago83xx, i2c: add mux support for fsl_i2c
Heiko Schocher [Tue, 24 Feb 2009 10:30:37 +0000 (11:30 +0100)]
83xx, i2c: add mux support for fsl_i2c

This patch adds I2C mux support for the fsl_i2c driver. This
allows you to add "new" i2c busses, which are reached over
i2c muxes. For more infos, please look in the README and
search for CONFIG_I2C_MUX.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15 years ago83xx, kmeter1: add I2C, dtt, eeprom support
Heiko Schocher [Tue, 24 Feb 2009 10:30:34 +0000 (11:30 +0100)]
83xx, kmeter1: add I2C, dtt, eeprom support

This patch adds I2C support for the Keymile kmeter1 board.
It uses the First I2C Controller from the CPU, for
accessing 4 temperature sensors, an eeprom with IVM data
and the booteeprom over a pca9547 mux.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15 years agoi2c, dtt: move dtt_init () to board_init_r ()
Heiko Schocher [Tue, 24 Feb 2009 10:30:30 +0000 (11:30 +0100)]
i2c, dtt: move dtt_init () to board_init_r ()

In case where a board not uses CONFIG_POST, it is not
necessary to init the DTTs when running from flash.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15 years ago83xx: Fix some bugs in spd sdram code
Dave Liu [Wed, 25 Feb 2009 04:31:32 +0000 (12:31 +0800)]
83xx: Fix some bugs in spd sdram code

1. RD_TO_PRE missed to add the AL, and need min 2 clocks for
  tRTP according to DDR2 JEDEC spec.
2. WRTORD - tWTR need min 2 clocks according to DDR2 JEDEC spec.
3. add the support of DDR2-533,667,800 DIMMs
4. cpo
5. make the AL to min to gain better performance.

The Micron MT9HTF6472CHY-667D1 DIMMs test passed on
MPC837xEMDS platform at 266MHz/333MHz/400MHz data rate.

items 1, 2 and 5:
Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15 years agoMPC8349ITX: several config issues fixed
Valeriy Glushkov [Wed, 4 Feb 2009 16:27:49 +0000 (18:27 +0200)]
MPC8349ITX: several config issues fixed

The previous version rebooted forever with DDR bigger than 256MB.
Access the DS1339 RTC chip is on I2C1 bus.
Allow DHCP.

Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15 years agompc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal
Anton Vorontsov [Thu, 19 Feb 2009 15:20:39 +0000 (18:20 +0300)]
mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal

The SerDes initialization should be finished before negating the reset
signal according to the reference manual. This isn't an issue on real
hardware, but we'd better stick to the specifications anyway.

Suggested-by: Liu Dave <DaveLiu@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>