Aaron Carroll [Mon, 24 Jan 2011 07:06:44 +0000 (18:06 +1100)]
Add '-coreid' target option to support multiple cores per TAP.
ARM Cortex-A9 multi-core chips expose a single TAP/DAP which connects
to both cores. The '-coreid' option selects which core the target
should connect to.
Note that at present, OpenOCD can connect to either core, but not both
simulatenously, until ADI contexts can be shared.
fix segfault from stack corruption in ahbap_debugport_init
ahbap_debugport_init was queueing reads to a local stack variable but
didn't execute the queue before returning. Since the result of the reads
are not used anyway, it's better to pass NULL as the destination instead of
a dummy variable. I changed this throughout the function, even for the
reads that were actually executed.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Eric Wetzel [Tue, 18 Jan 2011 16:17:22 +0000 (11:17 -0500)]
stellaris: automatically generate and update device IDs
Added a Perl script to contrib that uses the header files in StellarisWare complete Firmware Development Package provided by TI/Luminary to generate a new list of device IDs
Used Perl script and revision 6734 of TI/Luminary StellarisWare to update device IDs
Erik Botö [Mon, 10 Jan 2011 18:13:52 +0000 (19:13 +0100)]
Flash driver for em357
Hi,
I took the stm32x NOR flash driver and adapted it for the Ember EM357
chip. This chip is very similar to em351 and stm32w so the driver
should be easily extended to support those as well if anyone can get
their hands on some of those for testing.
Santeri Salko [Thu, 13 Jan 2011 13:21:06 +0000 (15:21 +0200)]
str9xpec: Find flash controller from the chain.
Find the flash controller by position since it is before the core,
not after it.
This fixes the problem that str9xpec enable_turbo (or any other
str9xpec command) did not work. (See my post in
http://forum.sparkfun.com/viewtopic.php?f=18&t=25542)
Freddie Chopin [Sat, 8 Jan 2011 11:29:31 +0000 (12:29 +0100)]
Add another level of procedures to LPC2xxx initialization - procedures for specific targets (setup_lpc<number>) take core clock and adapter clock as parameters. This way "constant" parameters (flash size and type, CPUTAPID, etc.) do not need to be copied if one wishes to change the "variable" parameters - like the core clock or adapter clock - in a board config file or somewhere else.
Spencer Oliver [Tue, 4 Jan 2011 12:29:49 +0000 (12:29 +0000)]
mips32: add fastdata loader working area
Add a working area that is preserved between calls to
mips_m4k_bulk_write_memory - this gives us a speed increase
of approx 3kb/sec during flash writes to the pic32mx.
This area is released during a resume/reset.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
cfi_protect is not implemented on Spansion flashes (many do not even have protection bits). Demote from error to warning, so that common board code can use "flash write_image erase unlock" regardless of the flash type.
Signed-off-by: Michael Schwingen <michael@schwingen.org>
non-CFI flash code uses data from CFI structures. Make sure that timeouts are filled in on non-CFI flashes, and print CFI information in all cases, nut just on CFI flashes.
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Jon Povey [Sun, 2 Jan 2011 14:52:48 +0000 (23:52 +0900)]
svf: implement sleep for RUNTEST min_time
Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
min_time was effectively ignored, I needed it to program a Lattice MachXO
which uses a RUNTEST to wait for an erase operation, amongst other things.
With this patch pauses happen and I can program the device with an SVF
generated in LSC ispVM (with "Rev D Standard" checked to suppress
nonstandard LOOP statements)
Antonio Borneo [Fri, 31 Dec 2010 11:18:09 +0000 (19:18 +0800)]
NAND/CORE: Replace decimal dot in messages
Table of NAND devices reports operating voltage.
Replace comma with proper decimal dot.
Øyvind: "." is correct for UK/US, but incorrect for
many other languages. OpenOCD is not localized at this
point, so sticking to "." for US/UK should be OK.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Antonio Borneo [Fri, 31 Dec 2010 11:18:08 +0000 (19:18 +0800)]
flash/nand: review NAND driver interface
From struct nand_flash_controller :
- remove unused field register_commands;
- remove field controller_ready, exported but
never referenced.
Remove dead code pointed by controller_ready.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Andrew MacIsaac [Wed, 29 Dec 2010 20:15:48 +0000 (12:15 -0800)]
Compilation Warnings on OS X 10.5
I received a number of "-Wshadow" related warnings (treated as errors) while
trying to build on OS X Leopard. In addition, there were two miscellaneous
other warnings in the flash drivers. Attached are two patches which correct
these issues and the commit messages to accompany them.
My system has the following configuration (taken from uname -a):
Darwin 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009;
root:xnu-1228.15.4~1/RELEASE_I386 i386
=== Werror_patch.txt Commit Message ===
compilation: fixes for -Wshadow warnings on OS X
These changes fix -Wshadow compilation warnings on OS X 10.5.8
=== flash_patch.txt Commit Message ===
compilation: fixes for flash driver warnings on OS X
These changes fix two compilation warnings on OS X 10.5.8:
../../../../src/flash/nor/at91sam3.c:2767: warning: redundant redeclaration
of 'at91sam3_flash'
../../../../src/flash/nor/at91sam3.c:101: warning: previous declaration of
'at91sam3_flash' was here
and
../../../../src/flash/nor/stmsmi.c:205: warning: format not a string literal
and no format arguments
David Brownell [Sat, 25 Dec 2010 02:50:41 +0000 (18:50 -0800)]
initial SWD transport (SWD infrastructure #2)
This piggy backs on JTAG so it's not yet pretty, but that
seems unavoidable so far given today's OpenOCD internals.
SWD init and data transfer are unfinished and untested, but
that should cause no regressions, and will be addressed by
the time drivers start using this infrastructure. Checking
in whould get the code working better sooner, and turn up any
structural/architectural issues while they're easier to fix.
The debug adapter drivers will provide simple SWD driver
structs with methods that kick in as needed (instead of JTAG).
So far just one adapter driver has been updated (not yet
ready to use or circulate).
The biggest issues are probably
- fault handling, where the ARM Debug Interface V5 pipelining
needs work in both JTAG and SWD modes and
- missing rewrite of block I/O code to work on both of our
Cortex-ready transports (Current code is hard-wired to JTAG);
relates also to the pipelining issue.
- omitted support to activate/deactivate SWO/SWV trace (this is
technically trivial, but configuring what to trace is NOT.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
----
Spencer Oliver [Thu, 23 Dec 2010 12:39:22 +0000 (12:39 +0000)]
flash: print flash bank name on flash info cmd
The flash bank name is a required element in adding flash banks,
however other than looking at the config file there is no way of
getting the name used in openocd.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Freddie Chopin [Sat, 4 Dec 2010 14:45:40 +0000 (15:45 +0100)]
remove srst_pulls_trst from LPC2xxx target scripts
LPC2xxx do not require reset_config srst_pulls_trst. This can cause various "strange" problems when flashing the chip, because "reset halt" actually allows the chip to run for some short period of time and execute some code.
Andrew Leech [Mon, 6 Dec 2010 21:05:56 +0000 (08:05 +1100)]
svf: various improvements
* added support for targeting particular tap
* improved file reading
* improved command line parsing
* added progress meter
* more readable time measurement output
Mike Dunn [Thu, 2 Dec 2010 19:08:28 +0000 (11:08 -0800)]
xscale: trace buffer remains enabled until explicitly disabled
Hi everyone,
Since a call went out for patches... been sitting on this for months. For some
reason, the xscale trace buffer is automatically disabled as soon as a break
occurs and the trace data is collected. This patch was a result of the
frustration of always re-enabling it, or else hitting a breakpoint and checking
the trace data, only to discover that I forgot to re-enable it before resuming.
Don't see why it should work this way. There is no run-time penalty, AFAIK.
Along the way, I also cleaned up a little by removing the ugly practice of
recording wrap mode by setting the fill count variable to "-1", replacing it
with an enum that records the trace mode.
I've been using this for months. Comments, criticisms gratefully received.
Spencer Oliver [Thu, 2 Dec 2010 13:11:08 +0000 (13:11 +0000)]
luminary: remove unused config cmds.
Due to commit e40aee2954d2beabe1d8c530d9ff1e564fb01f48 we now honour the
targets 'reset_config' setting. Previously we ignored the srst setting
for luminary targets.
Luminary targets have never supported using srst to reset into debug mode
so remove the option from the target configs files.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Currently the cmd 'cortex_m3 reset_config' will overide the default
target's 'reset_config'.
Chnage the behaviour to use the target 'reset_config' if configured and
fallback if not.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
projects / openocd / log