]> git.sur5r.net Git - openocd/commitdiff
Add another level of procedures to LPC2xxx initialization - procedures for specific...
authorFreddie Chopin <freddie_chopin@op.pl>
Sat, 8 Jan 2011 11:29:31 +0000 (12:29 +0100)
committerØyvind Harboe <oyvind.harboe@zylin.com>
Sun, 9 Jan 2011 20:34:02 +0000 (21:34 +0100)
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
tcl/target/lpc2103.cfg
tcl/target/lpc2124.cfg
tcl/target/lpc2129.cfg
tcl/target/lpc2148.cfg
tcl/target/lpc2294.cfg
tcl/target/lpc2378.cfg
tcl/target/lpc2478.cfg

index 3aa590bc17902bac0b02234fa69837de25d4e6df..f55777f56508e9d9d610543b85f3cb3e4434d254 100644 (file)
@@ -2,8 +2,20 @@
 
 source [find target/lpc2xxx.cfg]
 
-proc init_targets {} {
-       # 32kB flash and 8kB SRAM, clocked with 12MHz crystal
+# parameters:
+# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
+# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
+
+proc setup_lpc2103 {core_freq_khz adapter_freq_khz} {
+       # 32kB flash and 8kB SRAM
        # setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
-       setup_lpc2xxx lpc2103 0x4f1f0f0f 0x8000 lpc2000_v2 0x2000 12000 1500
+       setup_lpc2xxx lpc2103 0x4f1f0f0f 0x8000 lpc2000_v2 0x2000 $core_freq_khz $adapter_freq_khz
+}
+
+proc init_targets {} {
+       # default to core clocked with 12MHz crystal
+       echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different."
+       
+       # setup_lpc2103 <core_freq_khz> <adapter_freq_khz>
+       setup_lpc2103 12000 1500
 }
index 94ac5be64872852e45f864c69382b838a6461b58..02517381af8e9302a1082f88c1a0f51867ba42f0 100644 (file)
@@ -2,8 +2,20 @@
 
 source [find target/lpc2xxx.cfg]
 
-proc init_targets {} {
-       # 256kB flash and 16kB SRAM, clocked with 12MHz crystal
+# parameters:
+# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
+# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
+
+proc setup_lpc2124 {core_freq_khz adapter_freq_khz} {
+       # 256kB flash and 16kB SRAM
        # setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
-       setup_lpc2xxx lpc2124 0x4f1f0f0f 0x40000 lpc2000_v1 0x4000 12000 1500
+       setup_lpc2xxx lpc2124 0x4f1f0f0f 0x40000 lpc2000_v1 0x4000 $core_freq_khz $adapter_freq_khz
+}
+
+proc init_targets {} {
+       # default to core clocked with 12MHz crystal
+       echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different."
+       
+       # setup_lpc2124 <core_freq_khz> <adapter_freq_khz>
+       setup_lpc2124 12000 1500
 }
index 10fcd0c17707a321b273145ab595cb757e545f69..2c33cde310f5f6913e8f6b73e30006dc9f8c6a38 100644 (file)
@@ -2,8 +2,20 @@
 
 source [find target/lpc2xxx.cfg]
 
-proc init_targets {} {
-       # 256kB flash and 16kB SRAM, clocked with 12MHz crystal
+# parameters:
+# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
+# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
+
+proc setup_lpc2129 {core_freq_khz adapter_freq_khz} {
+       # 256kB flash and 16kB SRAM
        # setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
-       setup_lpc2xxx lpc2129 0xcf1f0f0f 0x40000 lpc2000_v1 0x4000 12000 1500
+       setup_lpc2xxx lpc2129 0xcf1f0f0f 0x40000 lpc2000_v1 0x4000 $core_freq_khz $adapter_freq_khz
+}
+
+proc init_targets {} {
+       # default to core clocked with 12MHz crystal
+       echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different."
+       
+       # setup_lpc2129 <core_freq_khz> <adapter_freq_khz>
+       setup_lpc2129 12000 1500
 }
index 747dcd960f1506be50f2137a8560d2588a04998d..f3a2011a81e1c91f593c7d4652dc838680562748 100644 (file)
@@ -2,8 +2,20 @@
 
 source [find target/lpc2xxx.cfg]
 
-proc init_targets {} {
-       # 500kB flash and 32kB SRAM, clocked with 12MHz crystal
+# parameters:
+# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
+# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
+
+proc setup_lpc2148 {core_freq_khz adapter_freq_khz} {
+       # 500kB flash and 32kB SRAM
        # setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
-       setup_lpc2xxx lpc2148 "0x3f0f0f0f 0x4f1f0f0f" 0x7d000 lpc2000_v2 0x8000 12000 1500
+       setup_lpc2xxx lpc2148 "0x3f0f0f0f 0x4f1f0f0f" 0x7d000 lpc2000_v2 0x8000 $core_freq_khz $adapter_freq_khz
+}
+
+proc init_targets {} {
+       # default to core clocked with 12MHz crystal
+       echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different."
+       
+       # setup_lpc2148 <core_freq_khz> <adapter_freq_khz>
+       setup_lpc2148 12000 1500
 }
index b1042af0a25e197ceffbd253a4b4e7239a6be274..83d595deb57f8bb87e85a681e86781720a47740a 100644 (file)
@@ -2,10 +2,22 @@
 
 source [find target/lpc2xxx.cfg]
 
-proc init_targets {} {
-       # 256kB flash and 16kB SRAM, clocked with 12MHz crystal
+# parameters:
+# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
+# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
+
+proc setup_lpc2294 {core_freq_khz adapter_freq_khz} {
+       # 256kB flash and 16kB SRAM
        # setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
        
        # !! TAPID unknown !!
-       setup_lpc2xxx lpc2294 0xffffffff 0x40000 lpc2000_v1 0x4000 12000 1500
+       setup_lpc2xxx lpc2294 0xffffffff 0x40000 lpc2000_v1 0x4000 $core_freq_khz $adapter_freq_khz
+}
+
+proc init_targets {} {
+       # default to core clocked with 12MHz crystal
+       echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different."
+       
+       # setup_lpc2294 <core_freq_khz> <adapter_freq_khz>
+       setup_lpc2294 12000 1500
 }
index 30c71aa556ce9e326207f614c13e3e4ddde24284..0b66b82557452d39eda19d0357556275924cf42f 100644 (file)
@@ -2,8 +2,20 @@
 
 source [find target/lpc2xxx.cfg]
 
-proc init_targets {} {
-       # 504kB flash and 32kB SRAM, clocked with 4MHz internal oscillator
+# parameters:
+# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
+# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
+
+proc setup_lpc2378 {core_freq_khz adapter_freq_khz} {
+       # 504kB flash and 32kB SRAM
        # setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
-       setup_lpc2xxx lpc2378 0x4f1f0f0f 0x7e000 lpc2000_v2 0x8000 4000 500
+       setup_lpc2xxx lpc2378 0x4f1f0f0f 0x7e000 lpc2000_v2 0x8000 $core_freq_khz $adapter_freq_khz
+}
+
+proc init_targets {} {
+       # default to core clocked with 4MHz internal oscillator
+       echo "Warning - assuming default core clock 4MHz! Flashing may fail if actual core clock is different."
+       
+       # setup_lpc2378 <core_freq_khz> <adapter_freq_khz>
+       setup_lpc2378 4000 500
 }
index 9c34b97e1aff07e95c18e1a818d26b3ecbd06e20..48e5bdf3f0af74e244062bc5dcb4bafcc0c575f3 100644 (file)
@@ -2,8 +2,20 @@
 
 source [find target/lpc2xxx.cfg]
 
-proc init_targets {} {
-       # 504kB flash and 64kB SRAM, clocked with 4MHz internal oscillator
+# parameters:
+# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
+# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
+
+proc setup_lpc2478 {core_freq_khz adapter_freq_khz} {
+       # 504kB flash and 64kB SRAM
        # setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
-       setup_lpc2xxx lpc2478 0x4f1f0f0f 0x7e000 lpc2000_v2 0x10000 4000 500
+       setup_lpc2xxx lpc2478 0x4f1f0f0f 0x7e000 lpc2000_v2 0x10000 $core_freq_khz $adapter_freq_khz
+}
+
+proc init_targets {} {
+       # default to core clocked with 4MHz internal oscillator
+       echo "Warning - assuming default core clock 4MHz! Flashing may fail if actual core clock is different."
+       
+       # setup_lpc2478 <core_freq_khz> <adapter_freq_khz>
+       setup_lpc2478 4000 500
 }