Wolfgang Denk [Tue, 24 Oct 2006 12:42:37 +0000 (14:42 +0200)]
Add ATSTK1000 and ATSTK1002 board support
Patch by Haavard Skinnemoen, 06 Sep 2006
This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
daughterboard.
ATSTK1000 is a full-featured development board for AT32AP CPUs. It
has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
CompactFlash cards. For more information, please see this page:
Wolfgang Denk [Tue, 24 Oct 2006 12:31:24 +0000 (14:31 +0200)]
Add common serial driver for Atmel AT32 and AT91 chips
Patch by Haavard Skinnemoen, 06 Sep 2006
This is a first attempt at creating a common serial driver for Atmel
chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
be possible to support AT91RM9200 and other ARM-based chips with some
minor modifications.
There's nothing fundamentally AVR32-specific in this driver, but it
does use some features which are currently only defined for the
AT32AP CPU port:
* pm_get_clock_freq: Obtain the clock frequency of a given domain
* gd->console_uart: A "struct device" containing information about
register mappings, gpio resources and clocks associated with the
UART device.
For more information about these features, please see the "AT32AP
CPU" patch.
Wolfgang Denk [Tue, 24 Oct 2006 12:27:35 +0000 (14:27 +0200)]
Add AT32AP CPU and AT32AP7000 SoC support
Patch by Haavard Skinnemoen, 06 Sep 2006
This patch adds support for the AT32AP CPU family and the AT32AP7000
chip, which is the first chip implementing the AVR32 architecture.
The AT32AP CPU core is a high-performance implementation featuring a
7-stage pipeline, separate instruction- and data caches, and a MMU.
For more information, please see the "AVR32 AP Technical Reference":
In addition to this, the AT32AP7000 chip comes with a large set of
integrated peripherals, many of which are shared with the AT91 series
of ARM-based microcontrollers from Atmel. Full data sheet is
available here:
Wolfgang Denk [Tue, 24 Oct 2006 11:57:33 +0000 (13:57 +0200)]
Use -g instead of -gstabs in AFLAGS_DEBUG
Patch by Haavard Skinnemoen, 30 Aug 2006
In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
matter what the target's preferred debugging format is. This patch
simply replaces -gstabs with -g, so that the default debugging format
for the architecture is used.
Jon Loeliger [Fri, 20 Oct 2006 20:50:15 +0000 (15:50 -0500)]
Converted all 85xx boards to use a common FSL I2C driver.
Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
And removed hard i2c path from a few u-boot.lds scipts too.
Minor whitespace cleanups along the way.
Stefan Roese [Thu, 12 Oct 2006 17:50:17 +0000 (19:50 +0200)]
* PPC405EP: Add support for board configuration of CPC0_PCI register
This is needed to be able to configure PerWE*/PCI_INT* pin as PerWE*
Patch by Tolunay Orkun, 07 Apr 2006
Stefan Roese [Thu, 12 Oct 2006 17:43:29 +0000 (19:43 +0200)]
* PPC405EP: Add CFG_GPIO0_OR, CFG_GPIO0_ODR to setup GPIO completely.
- Add configuration of Open Drain GPIO Output selection
- Add configuration of initial value of GPIO output pins
Patch by Tolunay Orkun, 07 Apr 2006
Grant Likely [Tue, 10 Oct 2006 06:23:32 +0000 (00:23 -0600)]
Fix possible uninitialized variable compiler warning.
When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
do_bootm_linux() may be uninitialized. There is no possibility in the
current code that len will get used uninitialized, but this fix follows
the existing convention of setting both len and data to zero at the same
time.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Stefan Roese [Tue, 10 Oct 2006 10:36:02 +0000 (12:36 +0200)]
* Several improvements to the new NAND subsystem:
- JFFS2 related commands implemented in mtd-utils style
- Support for bad blocks
- Bad block testing commands
- NAND lock commands
Please take a look at doc/README.nand for more details
Patch by Guido Classen, 10 Oct 2006
Stefan Roese [Mon, 9 Oct 2006 10:55:38 +0000 (12:55 +0200)]
Define IH_CPU_AVR32
Make it possible to generate AVR32 uImage files with mkimage and
make cmd_bootm recognize them.
Patch by Haavard Skinnemoen, 22 Sep 2006
Wolfgang Denk [Sun, 8 Oct 2006 23:07:53 +0000 (01:07 +0200)]
TQM5200: perform POST memory test only on STK52xx carrier board.
(and then only if PSC6_3 is read as "1" when booting).
Patch by Martin Krause, 21 Jun 2006
Update for CAM5200 board:
- Map in a additional chip selects CS4 and CS5.
- Modify the port configration, configure six UARTs and no PCI,
ATA and USB.
- Add custom flash driver to handle specific byte swapping
Andy Fleming [Wed, 13 Sep 2006 15:34:18 +0000 (10:34 -0500)]
Add support for eTSEC 3 & 4 on 8548 CDS
* Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
This will only work on rev 1.3 boards (but doesn't break older boards)
* Cleaned up some comments to reflect the expanded role of tsec
in other systems
Jon Loeliger [Thu, 14 Sep 2006 13:40:36 +0000 (08:40 -0500)]
Handle 86xx SVR values according to the new Reference Manual.
Both 8641 and 8641D have SVR == 0x8090, and are distinguished
by the byte in bits 16-23 instead.
Thanks to Jason Jin for noticing.
projects / u-boot / log