]>
git.sur5r.net Git - i3/i3status/log
Mats [Thu, 5 Dec 2013 21:12:17 +0000 (22:12 +0100)]
disk: Distinguish between IEC, SI and custom prefixes
* IEC: Ki, Mi, Gi, Ti (powers of 1024)
* SI: k, M, G, T (powers of 1000)
* custom: K, M, G, T (powers of 1024)
Kinware AB [Tue, 12 Nov 2013 19:51:23 +0000 (20:51 +0100)]
Add support for path_exists directive.
Michael Stapelberg [Mon, 18 Nov 2013 21:32:48 +0000 (22:32 +0100)]
document format_muted in the manpage
Gereon Kremer [Thu, 14 Nov 2013 23:41:33 +0000 (00:41 +0100)]
Added different format string for volume in case it is muted.
If the volume is muted, the volume level would simply be displayed as zero and the color changed to color_degraded.
This patch lets the user define a custom format string for when the volume is muted.
The default value is "♪: 0%" ("♪: %volume" being the usual format).
Sebastian Ullrich [Mon, 11 Nov 2013 22:23:00 +0000 (23:23 +0100)]
default config: show %avail disk space instead of %free
The former property is generally more relevant to end users
Michael Stapelberg [Sat, 9 Nov 2013 13:34:12 +0000 (14:34 +0100)]
format detection: simplify code, handle "sh" processes in the hierarchy
i3 starts processes using /bin/sh now, not $SHELL. This increases the
likelihood with which we are started by dash, which tends to leave its
processes in the hierarchy, e.g.:
michael 1524 i3bar --bar_id=bar-0 --socket=/run/user/1000/i3/ipc-s
michael 1525 \_ /bin/sh -c i3status
michael 1526 \_ i3status
This case is now handled correctly — when the parent is “sh”, the parent
of sh will be used instead.
Michael Stapelberg [Sat, 9 Nov 2013 13:12:22 +0000 (14:12 +0100)]
fix slurp(), it needs to read size-1 for the trailing NUL
Michael Stapelberg [Thu, 24 Oct 2013 17:19:21 +0000 (19:19 +0200)]
print_cpu_temperature: fix memory leak (Thanks kuba)
Arnaud Degroote [Sun, 6 Oct 2013 21:18:53 +0000 (21:18 +0000)]
Add support for cpu temperature on NetBSD (using envsys(4))
Arnaud Degroote [Sun, 6 Oct 2013 18:13:29 +0000 (18:13 +0000)]
Allow to print cpu usage on NetBSD
Arnaud Degroote [Sun, 6 Oct 2013 18:13:05 +0000 (18:13 +0000)]
Allow to print eth information on NetBSD
Arnaud Degroote [Sun, 6 Oct 2013 18:12:16 +0000 (18:12 +0000)]
Fix the build on NetBSD
Jan-Erik Rediger [Wed, 17 Jul 2013 21:43:45 +0000 (23:43 +0200)]
Add example path for CPU temperature
Michael Stapelberg [Tue, 9 Jul 2013 21:25:16 +0000 (23:25 +0200)]
manpage: update example for load’s max_threshold
M. Kory Woods [Sun, 7 Jul 2013 15:54:50 +0000 (10:54 -0500)]
allow load to be a float
Michael Stapelberg [Tue, 18 Jun 2013 16:14:38 +0000 (18:14 +0200)]
Makefile: use .SILENT and support V=1 for verbose builds
Axel Wagner [Tue, 11 Jun 2013 14:08:14 +0000 (16:08 +0200)]
Bugfix: In term-output, clear line before drawing new one
If we don't do this, the output of i3status will remain on the terminal,
which is really ugly if the statusline becomes shorter after a while
(for example a connection get's lost), because there will be garbage.
Michael Stapelberg [Sun, 19 May 2013 17:58:51 +0000 (19:58 +0200)]
signal handler: set flag because directly calling fprintf() is unsafe
Axel Wagner [Thu, 16 May 2013 20:49:13 +0000 (22:49 +0200)]
Implement term-output-format
oblique [Sun, 12 May 2013 17:44:27 +0000 (20:44 +0300)]
print_volume(linux): Open a new mixer every time.
This fix the following bug:
If you switch your sound card on-the-fly, print_volume continued to
use the old sound card.
Jonas Cleve [Sat, 4 May 2013 14:22:29 +0000 (16:22 +0200)]
fix #1017: i3status uses generic battery instance
Michael Stapelberg [Sat, 4 May 2013 15:50:05 +0000 (17:50 +0200)]
manpage: be more explicit about the path option
Baptiste Daroussin [Tue, 19 Mar 2013 18:08:35 +0000 (19:08 +0100)]
Support colored output for CPU temperature on FreeBSD
Michael Stapelberg [Tue, 19 Mar 2013 18:58:22 +0000 (19:58 +0100)]
man: mention i3bar in the description (Thanks andi)
Michael Stapelberg [Tue, 19 Mar 2013 18:56:44 +0000 (19:56 +0100)]
print_volume: don’t return, complete the buffer first
Otherwise, i3bar will display “SPEC VIOLATION” because full_text is
missing in the block.
Baptiste Daroussin [Tue, 19 Mar 2013 18:23:01 +0000 (19:23 +0100)]
Enable colored output for battery on FreeBSD
Baptiste Daroussin [Tue, 19 Mar 2013 17:32:08 +0000 (18:32 +0100)]
Support mixer_idx with OSS
make mixer_idx load the default mixer
Baptiste Daroussin [Tue, 19 Mar 2013 17:23:59 +0000 (18:23 +0100)]
Show degraded colors in case volume is muted with OSS
Christoph Göttschkes [Thu, 7 Mar 2013 20:21:54 +0000 (21:21 +0100)]
Added format_down option for battery if no battery is available.
Jakob Haufe [Thu, 28 Feb 2013 13:15:22 +0000 (14:15 +0100)]
Fix FTBFS on Hurd
On GNU/Hurd, THERMAL_ZONE is undefined. This makes compilation fail as
outwalk is declared inside of #ifdef THERMAL_ZONE, but it's used outside
of it (by OUTPUT_FULL_TEXT).
This moves the declaration outside the #ifdef to allow for successful
compilation on Hurd again.
Michael Stapelberg [Wed, 27 Feb 2013 09:56:28 +0000 (10:56 +0100)]
update CHANGELOG
Jiri Pinkava [Tue, 26 Feb 2013 19:16:47 +0000 (20:16 +0100)]
contrib: fix premature insetion of status message into JSON
Pass first 2 lines of JSON unmodified. It contains protocol version
and start of block of blocks of status messages.
Michael Stapelberg [Mon, 25 Feb 2013 23:32:24 +0000 (00:32 +0100)]
wireless: call START_COLOR only once (Thanks XTaran)
Michael Stapelberg [Sat, 23 Feb 2013 17:05:08 +0000 (18:05 +0100)]
battery: initialize colorful_output to false
Michael Stapelberg [Sat, 23 Feb 2013 17:04:52 +0000 (18:04 +0100)]
ipv6: properly handle colors for output_format == xmobar
Raphael Michel [Mon, 31 Dec 2012 17:13:36 +0000 (18:13 +0100)]
Add colorized output for load avg
Julien Lequertier [Sun, 10 Feb 2013 16:59:37 +0000 (17:59 +0100)]
Added option to show battery capacity without decimals
Michael Stapelberg [Sun, 10 Feb 2013 16:21:46 +0000 (17:21 +0100)]
use stdbool instead of (int)1 and (int)0 directly
Michael Stapelberg [Sun, 10 Feb 2013 16:19:56 +0000 (17:19 +0100)]
s/\<timezone\>/tz/ in order to not shadow the timezone var from time.h
Emil Mikulic [Sun, 13 Jan 2013 13:18:38 +0000 (00:18 +1100)]
Add tztime module to support multiple different timezones.
Michael Stapelberg [Sun, 10 Feb 2013 14:17:15 +0000 (15:17 +0100)]
README: refer to cr.i3wm.org for patches
Michael Stapelberg [Mon, 4 Feb 2013 20:36:55 +0000 (21:36 +0100)]
Bugfix: output auto detect: properly detect ambiguous situations (Thanks mist)
fixes #940
Michael Stapelberg [Mon, 28 Jan 2013 10:37:23 +0000 (11:37 +0100)]
retab! print_cpu_temperature
Emil Mikulic [Sun, 13 Jan 2013 12:23:43 +0000 (23:23 +1100)]
Make sure colorful_output variable is initialized.
Emil Mikulic [Sun, 13 Jan 2013 13:18:13 +0000 (00:18 +1100)]
src/*.c depends on include/i3status.h
Adrien Schildknecht [Thu, 24 Jan 2013 13:51:33 +0000 (14:51 +0100)]
wifi: properly display ad-hoc networks
No statistics are displayed with ad-hoc networks since none are available.
Gereon Kremer [Sat, 5 Jan 2013 11:47:02 +0000 (12:47 +0100)]
make refreshs align with minutes
Gereon Kremer [Sat, 22 Dec 2012 18:06:53 +0000 (19:06 +0100)]
changing volume color from bad to degraded if muted
Michael Stapelberg [Wed, 5 Dec 2012 16:47:29 +0000 (17:47 +0100)]
make SIGUSR1 do nothing, so that killall -USR1 i3status will force an update
Sending SIGUSR1 will interrupt the nanosleep() and thus force a new
iteration of i3status’s output loop. The signal handler itself is empty.
Based on the question by ttjjss at
http://faq.i3wm.org/question/854/how-to-force-status-bar-update/
Scott Tincman [Wed, 14 Nov 2012 01:29:55 +0000 (20:29 -0500)]
DragonFlyBSD support added
Michael Stapelberg [Sat, 10 Nov 2012 07:46:26 +0000 (08:46 +0100)]
Bugfix: make custom colors configurable for battery (Thanks thomas)
fixes #865
Michael Stapelberg [Wed, 7 Nov 2012 20:14:02 +0000 (21:14 +0100)]
Bugfix: make custom colors configurable for cpu_temperature (Thanks thomas)
fixes #865
Deiz [Wed, 31 Oct 2012 17:27:41 +0000 (13:27 -0400)]
Teen ordinal numbers always use a 'th' suffix.
Michael Stapelberg [Mon, 5 Nov 2012 16:40:51 +0000 (17:40 +0100)]
config: introduce an utf-8 character so that editors are forced to use utf-8
…and if they don’t, the user can fix the editor setup at least.
See also http://bugs.i3wm.org/864
Michael Stapelberg [Mon, 5 Nov 2012 16:36:53 +0000 (17:36 +0100)]
config: remove documentation from the disk field (got there by mistake)
Marcelo Cerri [Thu, 18 Oct 2012 20:55:41 +0000 (17:55 -0300)]
add good, degraded and bad colors per module
This commit adds support for color_good, color_degraded and color_bad
directives per module section in the config file.
Deiz [Wed, 17 Oct 2012 16:29:02 +0000 (12:29 -0400)]
Reduce the season day to 0-9 to properly print ordinal suffixes
Simon Elsbrock [Tue, 16 Oct 2012 20:45:19 +0000 (22:45 +0200)]
bugfix: colorize output even without discharge rate (thanks f8l)
On some systems, the discharge rate may be missing, although the battery
is still working. This leads to an edge case on Linux systems in which
the output may not be colorized although a threshold was defined.
This commit fixes the behavior by colorizing output if threshold_type is
set to "percentage". Since we cannot calculate remaining time without
discharge rate, output is still uncolorized in case of threshold_type
set to "time".
Michael Stapelberg [Tue, 16 Oct 2012 08:52:57 +0000 (10:52 +0200)]
implement max_threshold for linux, too
Jasper Lievisse Adriaanse [Wed, 10 Oct 2012 07:57:32 +0000 (09:57 +0200)]
i3status - More temperature related fixes for OpenBSD, and a general feature
- Temperature sensors can now set a 'max_threshold' value to color the output red if exceeded.
- Allow for arbitrary temperature sensors nodes to be selected with 'path' on OpenBSD.
Jasper Lievisse Adriaanse [Wed, 10 Oct 2012 07:53:34 +0000 (09:53 +0200)]
i3status - Default to acpitz(4) instead of cpu(4) for OpenBSD temperature readings
The acpitz(4) values are eventually used by the kernel to determine if the machine
is getting too hot.
Jasper Lievisse Adriaanse [Wed, 10 Oct 2012 07:52:27 +0000 (09:52 +0200)]
i3status - Handle down wireless interfaces just like ethernet interfaces (e.g. colors)
Deiz [Mon, 15 Oct 2012 17:56:17 +0000 (13:56 -0400)]
Skip a day in the Discordian calendar when St. Tib's Day has passed
Jasper Lievisse Adriaanse [Mon, 8 Oct 2012 20:15:14 +0000 (22:15 +0200)]
Implement %essid and %signal for wireless on OpenBSD.
Jasper Lievisse Adriaanse [Mon, 8 Oct 2012 20:13:47 +0000 (22:13 +0200)]
Implement %speed for Ethernet on OpenBSD.
Jasper Lievisse Adriaanse [Mon, 8 Oct 2012 11:30:38 +0000 (13:30 +0200)]
Various fixes for the OpenBSD section of the battery backend.
- fix the battery status printing in %status.
- fix remaining time when we're charging.
- use colors to indicate battery status.
- small cleanups.
Michael Stapelberg [Wed, 3 Oct 2012 13:12:49 +0000 (15:12 +0200)]
Bugfix: Move the pbval definition outside the ifdef (Thanks XTaran)
This fixes compilation on !linux
Michael Stapelberg [Wed, 3 Oct 2012 12:13:33 +0000 (14:13 +0200)]
remove debian/, packaging now lives on alioth
Michael Stapelberg [Wed, 3 Oct 2012 11:44:34 +0000 (13:44 +0200)]
include contrib/ in release tarballs
Michael Stapelberg [Wed, 3 Oct 2012 11:42:01 +0000 (13:42 +0200)]
update changelog and manpage for 2.6
Michael Stapelberg [Fri, 28 Sep 2012 22:08:56 +0000 (00:08 +0200)]
Save the DNS lookup for K.root-servers.net (Thanks barfoos)
This avoids running into a timeout when there is no connectivity on
i3status startup.
Simon Elsbrock [Wed, 5 Sep 2012 16:39:48 +0000 (18:39 +0200)]
print_battery.c: do END_COLOR only if START_COLOR was used
Simon Elsbrock [Wed, 5 Sep 2012 16:39:47 +0000 (18:39 +0200)]
turn volume into red if muted
fixes #743
Simon Elsbrock [Wed, 5 Sep 2012 16:39:46 +0000 (18:39 +0200)]
modify START_COLOR macro variable naming
Rename val to _val to prevent shadowing warnings due to its common
naming.
Michael Stapelberg [Fri, 31 Aug 2012 12:16:58 +0000 (14:16 +0200)]
introduce percentages for all values, document them
gereon [Thu, 30 Aug 2012 17:32:33 +0000 (19:32 +0200)]
adding percentage format string for disk info module
explicit cast to double, changed format string to percentage
Piotr Domagalski [Tue, 28 Aug 2012 20:07:33 +0000 (22:07 +0200)]
Eat unnecessary space from the battery format str.
If the battery is not discharging it may be not possible to give information on
remaining time or consumption. The resulting strings (%remaining, %consumption,
%emptytime) are empty then. But because they are in the format string, the
output string contains unnecessary spaces in this case.
This commit makes i3status strip these spaces.
Simon Elsbrock [Thu, 23 Aug 2012 14:42:38 +0000 (16:42 +0200)]
add additional battery threshold type "percentage"
The battery threshold can now be configured as type "time" or
"percentage", but defaults to "time" to prevent unexpected behavior.
Also, low_threshold was set to a more reasonable default of 30.
Philipp Schaefer [Mon, 30 Jul 2012 13:40:56 +0000 (15:40 +0200)]
use correct units for battery calculation
Michael Stapelberg [Sun, 12 Aug 2012 23:35:07 +0000 (01:35 +0200)]
Bugfix: non-i3bar formats always used color_bad (Thanks hongy19)
fixes #772
Valentin Haenel [Sun, 12 Aug 2012 15:57:48 +0000 (17:57 +0200)]
contrib: python version of the wrapper
Michael Stapelberg [Sat, 4 Aug 2012 19:31:06 +0000 (21:31 +0200)]
Import measure-net-speed bash scripts to contrib/
Michael Stapelberg [Thu, 12 Jul 2012 06:16:40 +0000 (08:16 +0200)]
Bugfix: Properly skip "consumption", not "consumptionbuf" (Thanks mloskot)
Fixes #752
Michael Stapelberg [Wed, 11 Jul 2012 17:11:29 +0000 (19:11 +0200)]
small style fix in src/print_battery_info.c (move comment)
Marcel Hellwig [Tue, 10 Jul 2012 09:45:45 +0000 (11:45 +0200)]
Calculate the consumption if POWER_SUPPLY_POWER_NOW does not exist in uevent
Lars Kumbier [Tue, 10 Jul 2012 13:26:08 +0000 (15:26 +0200)]
colorful ipv6 status message
Michael Stapelberg [Tue, 10 Jul 2012 18:35:53 +0000 (20:35 +0200)]
README: fix trailing whitespace, add libcap2-bin, more unicode
Lars Kumbier [Tue, 10 Jul 2012 13:10:10 +0000 (15:10 +0200)]
Some information on building i3status from source
Michael Stapelberg [Mon, 9 Jul 2012 13:13:46 +0000 (15:13 +0200)]
clarify the unit of the power consumption and reformat that paragraph
Marcel Hellwig [Sun, 8 Jul 2012 19:29:17 +0000 (21:29 +0200)]
Added new feature - consumption - to documentation
Marcel Hellwig [Thu, 5 Jul 2012 16:19:26 +0000 (18:19 +0200)]
Added consumption to battery info
Marcel Hellwig [Sun, 8 Jul 2012 19:47:42 +0000 (21:47 +0200)]
Added condition, for red color, when battery-time is low, namely battery is discharging
Mateusz Poszwa [Thu, 28 Jun 2012 09:22:00 +0000 (11:22 +0200)]
Avoid division by zero when calculating CPU usage.
Mateusz Loskot [Sun, 10 Jun 2012 23:32:30 +0000 (00:32 +0100)]
Moved translation of wireless status code to text from multiple places into single BATT_STATUS_NAME macro. It simplifies customisation of the hard-wired status text.
Michael Stapelberg [Sun, 10 Jun 2012 17:42:53 +0000 (19:42 +0200)]
add a small perl example wrapper script for i3status’s JSON output
Michael Stapelberg [Fri, 25 May 2012 07:57:03 +0000 (09:57 +0200)]
rename threshold to low_threshold and document it properly
Simon Elsbrock [Tue, 22 May 2012 21:14:59 +0000 (23:14 +0200)]
colorize battery output if remaining time below threshold
Michael Stapelberg [Tue, 15 May 2012 10:30:23 +0000 (12:30 +0200)]
battery info: output errors in JSON in every case
This hopefully fixes http://bugs.i3wm.org/707
Michael Stapelberg [Fri, 11 May 2012 20:38:10 +0000 (22:38 +0200)]
update changelog
Michael Stapelberg [Wed, 9 May 2012 16:56:57 +0000 (18:56 +0200)]
Error handling: Never output null as full_text (JSON), prefix messages with i3status (Thanks Artemis)
The former made i3bar crash, the latter is helpful for debugging.