]> git.sur5r.net Git - i3/i3status/log
i3/i3status
11 years agoAdded format_down option for battery if no battery is available.
Christoph Göttschkes [Thu, 7 Mar 2013 20:21:54 +0000 (21:21 +0100)]
Added format_down option for battery if no battery is available.

11 years agoFix FTBFS on Hurd
Jakob Haufe [Thu, 28 Feb 2013 13:15:22 +0000 (14:15 +0100)]
Fix FTBFS on Hurd

On GNU/Hurd, THERMAL_ZONE is undefined. This makes compilation fail as
outwalk is declared inside of #ifdef THERMAL_ZONE, but it's used outside
of it (by OUTPUT_FULL_TEXT).

This moves the declaration outside the #ifdef to allow for successful
compilation on Hurd again.

11 years agoupdate CHANGELOG 2.7
Michael Stapelberg [Wed, 27 Feb 2013 09:56:28 +0000 (10:56 +0100)]
update CHANGELOG

11 years agocontrib: fix premature insetion of status message into JSON
Jiri Pinkava [Tue, 26 Feb 2013 19:16:47 +0000 (20:16 +0100)]
contrib: fix premature insetion of status message into JSON

Pass first 2 lines of JSON unmodified. It contains protocol version
and start of block of blocks of status messages.

11 years agowireless: call START_COLOR only once (Thanks XTaran)
Michael Stapelberg [Mon, 25 Feb 2013 23:32:24 +0000 (00:32 +0100)]
wireless: call START_COLOR only once (Thanks XTaran)

11 years agobattery: initialize colorful_output to false
Michael Stapelberg [Sat, 23 Feb 2013 17:05:08 +0000 (18:05 +0100)]
battery: initialize colorful_output to false

11 years agoipv6: properly handle colors for output_format == xmobar
Michael Stapelberg [Sat, 23 Feb 2013 17:04:52 +0000 (18:04 +0100)]
ipv6: properly handle colors for output_format == xmobar

11 years agoAdd colorized output for load avg
Raphael Michel [Mon, 31 Dec 2012 17:13:36 +0000 (18:13 +0100)]
Add colorized output for load avg

11 years agoAdded option to show battery capacity without decimals
Julien Lequertier [Sun, 10 Feb 2013 16:59:37 +0000 (17:59 +0100)]
Added option to show battery capacity without decimals

11 years agouse stdbool instead of (int)1 and (int)0 directly
Michael Stapelberg [Sun, 10 Feb 2013 16:21:46 +0000 (17:21 +0100)]
use stdbool instead of (int)1 and (int)0 directly

11 years agos/\<timezone\>/tz/ in order to not shadow the timezone var from time.h
Michael Stapelberg [Sun, 10 Feb 2013 16:19:56 +0000 (17:19 +0100)]
s/\<timezone\>/tz/ in order to not shadow the timezone var from time.h

11 years agoAdd tztime module to support multiple different timezones.
Emil Mikulic [Sun, 13 Jan 2013 13:18:38 +0000 (00:18 +1100)]
Add tztime module to support multiple different timezones.

11 years agoREADME: refer to cr.i3wm.org for patches
Michael Stapelberg [Sun, 10 Feb 2013 14:17:15 +0000 (15:17 +0100)]
README: refer to cr.i3wm.org for patches

11 years agoBugfix: output auto detect: properly detect ambiguous situations (Thanks mist)
Michael Stapelberg [Mon, 4 Feb 2013 20:36:55 +0000 (21:36 +0100)]
Bugfix: output auto detect: properly detect ambiguous situations (Thanks mist)

fixes #940

11 years agoretab! print_cpu_temperature
Michael Stapelberg [Mon, 28 Jan 2013 10:37:23 +0000 (11:37 +0100)]
retab! print_cpu_temperature

11 years agoMake sure colorful_output variable is initialized.
Emil Mikulic [Sun, 13 Jan 2013 12:23:43 +0000 (23:23 +1100)]
Make sure colorful_output variable is initialized.

11 years agosrc/*.c depends on include/i3status.h
Emil Mikulic [Sun, 13 Jan 2013 13:18:13 +0000 (00:18 +1100)]
src/*.c depends on include/i3status.h

11 years agowifi: properly display ad-hoc networks
Adrien Schildknecht [Thu, 24 Jan 2013 13:51:33 +0000 (14:51 +0100)]
wifi: properly display ad-hoc networks

No statistics are displayed with ad-hoc networks since none are available.

11 years agomake refreshs align with minutes
Gereon Kremer [Sat, 5 Jan 2013 11:47:02 +0000 (12:47 +0100)]
make refreshs align with minutes

11 years agochanging volume color from bad to degraded if muted
Gereon Kremer [Sat, 22 Dec 2012 18:06:53 +0000 (19:06 +0100)]
changing volume color from bad to degraded if muted

11 years agomake SIGUSR1 do nothing, so that killall -USR1 i3status will force an update
Michael Stapelberg [Wed, 5 Dec 2012 16:47:29 +0000 (17:47 +0100)]
make SIGUSR1 do nothing, so that killall -USR1 i3status will force an update

Sending SIGUSR1 will interrupt the nanosleep() and thus force a new
iteration of i3status’s output loop. The signal handler itself is empty.

Based on the question by ttjjss at
http://faq.i3wm.org/question/854/how-to-force-status-bar-update/

12 years agoDragonFlyBSD support added
Scott Tincman [Wed, 14 Nov 2012 01:29:55 +0000 (20:29 -0500)]
DragonFlyBSD support added

12 years agoBugfix: make custom colors configurable for battery (Thanks thomas)
Michael Stapelberg [Sat, 10 Nov 2012 07:46:26 +0000 (08:46 +0100)]
Bugfix: make custom colors configurable for battery (Thanks thomas)

fixes #865

12 years agoBugfix: make custom colors configurable for cpu_temperature (Thanks thomas)
Michael Stapelberg [Wed, 7 Nov 2012 20:14:02 +0000 (21:14 +0100)]
Bugfix: make custom colors configurable for cpu_temperature (Thanks thomas)

fixes #865

12 years agoTeen ordinal numbers always use a 'th' suffix.
Deiz [Wed, 31 Oct 2012 17:27:41 +0000 (13:27 -0400)]
Teen ordinal numbers always use a 'th' suffix.

12 years agoconfig: introduce an utf-8 character so that editors are forced to use utf-8
Michael Stapelberg [Mon, 5 Nov 2012 16:40:51 +0000 (17:40 +0100)]
config: introduce an utf-8 character so that editors are forced to use utf-8

…and if they don’t, the user can fix the editor setup at least.

See also http://bugs.i3wm.org/864

12 years agoconfig: remove documentation from the disk field (got there by mistake)
Michael Stapelberg [Mon, 5 Nov 2012 16:36:53 +0000 (17:36 +0100)]
config: remove documentation from the disk field (got there by mistake)

12 years agoadd good, degraded and bad colors per module
Marcelo Cerri [Thu, 18 Oct 2012 20:55:41 +0000 (17:55 -0300)]
add good, degraded and bad colors per module

This commit adds support for color_good, color_degraded and color_bad
directives per module section in the config file.

12 years agoReduce the season day to 0-9 to properly print ordinal suffixes
Deiz [Wed, 17 Oct 2012 16:29:02 +0000 (12:29 -0400)]
Reduce the season day to 0-9 to properly print ordinal suffixes

12 years agobugfix: colorize output even without discharge rate (thanks f8l)
Simon Elsbrock [Tue, 16 Oct 2012 20:45:19 +0000 (22:45 +0200)]
bugfix: colorize output even without discharge rate (thanks f8l)

On some systems, the discharge rate may be missing, although the battery
is still working. This leads to an edge case on Linux systems in which
the output may not be colorized although a threshold was defined.

This commit fixes the behavior by colorizing output if threshold_type is
set to "percentage". Since we cannot calculate remaining time without
discharge rate, output is still uncolorized in case of threshold_type
set to "time".

12 years agoimplement max_threshold for linux, too
Michael Stapelberg [Tue, 16 Oct 2012 08:52:57 +0000 (10:52 +0200)]
implement max_threshold for linux, too

12 years agoi3status - More temperature related fixes for OpenBSD, and a general feature
Jasper Lievisse Adriaanse [Wed, 10 Oct 2012 07:57:32 +0000 (09:57 +0200)]
i3status - More temperature related fixes for OpenBSD, and a general feature

- Temperature sensors can now set a 'max_threshold' value to color the output red if exceeded.
- Allow for arbitrary temperature sensors nodes to be selected with 'path' on OpenBSD.

12 years agoi3status - Default to acpitz(4) instead of cpu(4) for OpenBSD temperature readings
Jasper Lievisse Adriaanse [Wed, 10 Oct 2012 07:53:34 +0000 (09:53 +0200)]
i3status - Default to acpitz(4) instead of cpu(4) for OpenBSD temperature readings

The acpitz(4) values are eventually used by the kernel to determine if the machine
is getting too hot.

12 years agoi3status - Handle down wireless interfaces just like ethernet interfaces (e.g. colors)
Jasper Lievisse Adriaanse [Wed, 10 Oct 2012 07:52:27 +0000 (09:52 +0200)]
i3status - Handle down wireless interfaces just like ethernet interfaces (e.g. colors)

12 years agoSkip a day in the Discordian calendar when St. Tib's Day has passed
Deiz [Mon, 15 Oct 2012 17:56:17 +0000 (13:56 -0400)]
Skip a day in the Discordian calendar when St. Tib's Day has passed

12 years agoImplement %essid and %signal for wireless on OpenBSD.
Jasper Lievisse Adriaanse [Mon, 8 Oct 2012 20:15:14 +0000 (22:15 +0200)]
Implement %essid and %signal for wireless on OpenBSD.

12 years agoImplement %speed for Ethernet on OpenBSD.
Jasper Lievisse Adriaanse [Mon, 8 Oct 2012 20:13:47 +0000 (22:13 +0200)]
Implement %speed for Ethernet on OpenBSD.

12 years agoVarious fixes for the OpenBSD section of the battery backend.
Jasper Lievisse Adriaanse [Mon, 8 Oct 2012 11:30:38 +0000 (13:30 +0200)]
Various fixes for the OpenBSD section of the battery backend.

- fix the battery status printing in %status.
- fix remaining time when we're charging.
- use colors to indicate battery status.
- small cleanups.

12 years agoBugfix: Move the pbval definition outside the ifdef (Thanks XTaran)
Michael Stapelberg [Wed, 3 Oct 2012 13:12:49 +0000 (15:12 +0200)]
Bugfix: Move the pbval definition outside the ifdef (Thanks XTaran)

This fixes compilation on !linux

12 years agoremove debian/, packaging now lives on alioth
Michael Stapelberg [Wed, 3 Oct 2012 12:13:33 +0000 (14:13 +0200)]
remove debian/, packaging now lives on alioth

12 years agoinclude contrib/ in release tarballs 2.6
Michael Stapelberg [Wed, 3 Oct 2012 11:44:34 +0000 (13:44 +0200)]
include contrib/ in release tarballs

12 years agoupdate changelog and manpage for 2.6
Michael Stapelberg [Wed, 3 Oct 2012 11:42:01 +0000 (13:42 +0200)]
update changelog and manpage for 2.6

12 years agoSave the DNS lookup for K.root-servers.net (Thanks barfoos)
Michael Stapelberg [Fri, 28 Sep 2012 22:08:56 +0000 (00:08 +0200)]
Save the DNS lookup for K.root-servers.net (Thanks barfoos)

This avoids running into a timeout when there is no connectivity on
i3status startup.

12 years agoprint_battery.c: do END_COLOR only if START_COLOR was used
Simon Elsbrock [Wed, 5 Sep 2012 16:39:48 +0000 (18:39 +0200)]
print_battery.c: do END_COLOR only if START_COLOR was used

12 years agoturn volume into red if muted
Simon Elsbrock [Wed, 5 Sep 2012 16:39:47 +0000 (18:39 +0200)]
turn volume into red if muted

fixes #743

12 years agomodify START_COLOR macro variable naming
Simon Elsbrock [Wed, 5 Sep 2012 16:39:46 +0000 (18:39 +0200)]
modify START_COLOR macro variable naming

Rename val to _val to prevent shadowing warnings due to its common
naming.

12 years agointroduce percentages for all values, document them
Michael Stapelberg [Fri, 31 Aug 2012 12:16:58 +0000 (14:16 +0200)]
introduce percentages for all values, document them

12 years agoadding percentage format string for disk info module
gereon [Thu, 30 Aug 2012 17:32:33 +0000 (19:32 +0200)]
adding percentage format string for disk info module

explicit cast to double, changed format string to percentage

12 years agoEat unnecessary space from the battery format str.
Piotr Domagalski [Tue, 28 Aug 2012 20:07:33 +0000 (22:07 +0200)]
Eat unnecessary space from the battery format str.

If the battery is not discharging it may be not possible to give information on
remaining time or consumption. The resulting strings (%remaining, %consumption,
%emptytime) are empty then. But because they are in the format string, the
output string contains unnecessary spaces in this case.

This commit makes i3status strip these spaces.

12 years agoadd additional battery threshold type "percentage"
Simon Elsbrock [Thu, 23 Aug 2012 14:42:38 +0000 (16:42 +0200)]
add additional battery threshold type "percentage"

The battery threshold can now be configured as type "time" or
"percentage", but defaults to "time" to prevent unexpected behavior.
Also, low_threshold was set to a more reasonable default of 30.

12 years agouse correct units for battery calculation
Philipp Schaefer [Mon, 30 Jul 2012 13:40:56 +0000 (15:40 +0200)]
use correct units for battery calculation

12 years agoBugfix: non-i3bar formats always used color_bad (Thanks hongy19)
Michael Stapelberg [Sun, 12 Aug 2012 23:35:07 +0000 (01:35 +0200)]
Bugfix: non-i3bar formats always used color_bad (Thanks hongy19)

fixes #772

12 years agocontrib: python version of the wrapper
Valentin Haenel [Sun, 12 Aug 2012 15:57:48 +0000 (17:57 +0200)]
contrib: python version of the wrapper

12 years agoImport measure-net-speed bash scripts to contrib/
Michael Stapelberg [Sat, 4 Aug 2012 19:31:06 +0000 (21:31 +0200)]
Import measure-net-speed bash scripts to contrib/

12 years agoBugfix: Properly skip "consumption", not "consumptionbuf" (Thanks mloskot)
Michael Stapelberg [Thu, 12 Jul 2012 06:16:40 +0000 (08:16 +0200)]
Bugfix: Properly skip "consumption", not "consumptionbuf" (Thanks mloskot)

Fixes #752

12 years agosmall style fix in src/print_battery_info.c (move comment)
Michael Stapelberg [Wed, 11 Jul 2012 17:11:29 +0000 (19:11 +0200)]
small style fix in src/print_battery_info.c (move comment)

12 years agoCalculate the consumption if POWER_SUPPLY_POWER_NOW does not exist in uevent
Marcel Hellwig [Tue, 10 Jul 2012 09:45:45 +0000 (11:45 +0200)]
Calculate the consumption if POWER_SUPPLY_POWER_NOW does not exist in uevent

12 years agocolorful ipv6 status message
Lars Kumbier [Tue, 10 Jul 2012 13:26:08 +0000 (15:26 +0200)]
colorful ipv6 status message

12 years agoREADME: fix trailing whitespace, add libcap2-bin, more unicode
Michael Stapelberg [Tue, 10 Jul 2012 18:35:53 +0000 (20:35 +0200)]
README: fix trailing whitespace, add libcap2-bin, more unicode

12 years agoSome information on building i3status from source
Lars Kumbier [Tue, 10 Jul 2012 13:10:10 +0000 (15:10 +0200)]
Some information on building i3status from source

12 years agoclarify the unit of the power consumption and reformat that paragraph
Michael Stapelberg [Mon, 9 Jul 2012 13:13:46 +0000 (15:13 +0200)]
clarify the unit of the power consumption and reformat that paragraph

12 years agoAdded new feature - consumption - to documentation
Marcel Hellwig [Sun, 8 Jul 2012 19:29:17 +0000 (21:29 +0200)]
Added new feature - consumption - to documentation

12 years agoAdded consumption to battery info
Marcel Hellwig [Thu, 5 Jul 2012 16:19:26 +0000 (18:19 +0200)]
Added consumption to battery info

12 years agoAdded condition, for red color, when battery-time is low, namely battery is discharging
Marcel Hellwig [Sun, 8 Jul 2012 19:47:42 +0000 (21:47 +0200)]
Added condition, for red color, when battery-time is low, namely battery is discharging

12 years agoAvoid division by zero when calculating CPU usage.
Mateusz Poszwa [Thu, 28 Jun 2012 09:22:00 +0000 (11:22 +0200)]
Avoid division by zero when calculating CPU usage.

12 years agoMoved translation of wireless status code to text from multiple places into single...
Mateusz Loskot [Sun, 10 Jun 2012 23:32:30 +0000 (00:32 +0100)]
Moved translation of wireless status code to text from multiple places into single BATT_STATUS_NAME macro. It simplifies customisation of the hard-wired status text.

12 years agoadd a small perl example wrapper script for i3status’s JSON output
Michael Stapelberg [Sun, 10 Jun 2012 17:42:53 +0000 (19:42 +0200)]
add a small perl example wrapper script for i3status’s JSON output

12 years agorename threshold to low_threshold and document it properly
Michael Stapelberg [Fri, 25 May 2012 07:57:03 +0000 (09:57 +0200)]
rename threshold to low_threshold and document it properly

12 years agocolorize battery output if remaining time below threshold
Simon Elsbrock [Tue, 22 May 2012 21:14:59 +0000 (23:14 +0200)]
colorize battery output if remaining time below threshold

12 years agobattery info: output errors in JSON in every case
Michael Stapelberg [Tue, 15 May 2012 10:30:23 +0000 (12:30 +0200)]
battery info: output errors in JSON in every case

This hopefully fixes http://bugs.i3wm.org/707

12 years agoupdate changelog 2.5.1
Michael Stapelberg [Fri, 11 May 2012 20:38:10 +0000 (22:38 +0200)]
update changelog

12 years agoError handling: Never output null as full_text (JSON), prefix messages with i3status...
Michael Stapelberg [Wed, 9 May 2012 16:56:57 +0000 (18:56 +0200)]
Error handling: Never output null as full_text (JSON), prefix messages with i3status (Thanks Artemis)

The former made i3bar crash, the latter is helpful for debugging.

12 years agoRemove cpu_temperature from the default config
Michael Stapelberg [Wed, 9 May 2012 16:39:59 +0000 (18:39 +0200)]
Remove cpu_temperature from the default config

It contradicts our philosophy and doesn’t work on many systems, so don’t use it
in the default config.

12 years agoImprove error message when the cpu temperature cannot be read
Michael Stapelberg [Wed, 9 May 2012 16:39:41 +0000 (18:39 +0200)]
Improve error message when the cpu temperature cannot be read

12 years agoUse (void) instead of () for functions without args (Thanks fernandotcl)
Michael Stapelberg [Mon, 7 May 2012 06:27:28 +0000 (08:27 +0200)]
Use (void) instead of () for functions without args (Thanks fernandotcl)

See also:
http://article.gmane.org/gmane.linux.kernel/1268792

The C compiler will handle (void) as "no arguments" and () as "variadic
function" (equivalent to (...)) which might lead to subtle errors.

12 years ago- Remove some superfluous #ifdef clutter - If we're compiling on !(Linux or FreeBSD...
Jasper Lievisse Adriaanse [Fri, 4 May 2012 07:36:38 +0000 (09:36 +0200)]
- Remove some superfluous #ifdef clutter - If we're compiling on !(Linux or FreeBSD), just emit a '?'.

12 years agoUpdate wrt. recent OpenBSD changes.
Jasper Lievisse Adriaanse [Fri, 4 May 2012 07:28:32 +0000 (09:28 +0200)]
Update wrt. recent OpenBSD changes.

12 years agoadd CHANGELOG to release tarball
Michael Stapelberg [Fri, 4 May 2012 14:05:42 +0000 (16:05 +0200)]
add CHANGELOG to release tarball

12 years agomakefile: include yajl-fallback in release tarballs
Michael Stapelberg [Fri, 4 May 2012 10:31:28 +0000 (12:31 +0200)]
makefile: include yajl-fallback in release tarballs

12 years agoHandle %d with non-default CPU temperature path.
Ewgenij Starostin [Fri, 4 May 2012 03:34:13 +0000 (05:34 +0200)]
Handle %d with non-default CPU temperature path.

12 years agoFix harmless format string mistake (Thanks loblik) 2.5
Michael Stapelberg [Wed, 2 May 2012 15:42:51 +0000 (17:42 +0200)]
Fix harmless format string mistake (Thanks loblik)

12 years agoadd CHANGELOG file
Michael Stapelberg [Wed, 2 May 2012 15:40:55 +0000 (17:40 +0200)]
add CHANGELOG file

12 years agobump copyright
Michael Stapelberg [Wed, 2 May 2012 15:29:28 +0000 (17:29 +0200)]
bump copyright

12 years agobump version number
Michael Stapelberg [Wed, 2 May 2012 15:28:47 +0000 (17:28 +0200)]
bump version number

12 years agoclean (generated) i3status.1 in distclean target
Michael Stapelberg [Wed, 2 May 2012 15:27:20 +0000 (17:27 +0200)]
clean (generated) i3status.1 in distclean target

12 years agomanpage: spelling / sentence fixes
Michael Stapelberg [Wed, 2 May 2012 15:26:08 +0000 (17:26 +0200)]
manpage: spelling / sentence fixes

12 years agomanpage: remove paragraph about version 2, that’s outdated by now
Michael Stapelberg [Wed, 2 May 2012 15:15:15 +0000 (17:15 +0200)]
manpage: remove paragraph about version 2, that’s outdated by now

12 years agobugfix: don’t use TOPDIR (Thanks loblik)
Michael Stapelberg [Mon, 30 Apr 2012 11:51:18 +0000 (13:51 +0200)]
bugfix: don’t use TOPDIR (Thanks loblik)

12 years agodocument the i3bar output format in the manpage
Michael Stapelberg [Mon, 30 Apr 2012 11:10:13 +0000 (13:10 +0200)]
document the i3bar output format in the manpage

12 years agoImplement displaying battery status on OpenBSD.
Jasper Lievisse Adriaanse [Sun, 29 Apr 2012 18:19:59 +0000 (20:19 +0200)]
Implement displaying battery status on OpenBSD.

12 years agoImplement basic fetching of cpu temperature on OpenBSD.
Jasper Lievisse Adriaanse [Sun, 29 Apr 2012 14:59:39 +0000 (16:59 +0200)]
Implement basic fetching of cpu temperature on OpenBSD.

12 years agoAllow overriding of a2x in the environment; as it may also be installed as a2x.py
Jasper Lievisse Adriaanse [Sat, 28 Apr 2012 16:46:24 +0000 (18:46 +0200)]
Allow overriding of a2x in the environment; as it may also be installed as a2x.py

12 years agoPrint the volume on OpenBSD too. Add missing library to Makefile accordingly.
Jasper Lievisse Adriaanse [Fri, 27 Apr 2012 17:09:16 +0000 (19:09 +0200)]
Print the volume on OpenBSD too. Add missing library to Makefile accordingly.

12 years agoFix disk usage on OpenBSD.
Jasper Lievisse Adriaanse [Fri, 27 Apr 2012 16:48:22 +0000 (18:48 +0200)]
Fix disk usage on OpenBSD.

12 years agoFix CPU usage on OpenBSD. Currently only takes the first cpu into account, but works...
Jasper Lievisse Adriaanse [Fri, 27 Apr 2012 15:32:46 +0000 (17:32 +0200)]
Fix CPU usage on OpenBSD. Currently only takes the first cpu into account, but works fine otherwise.

12 years agoFix include order; fixes build on OpenBSD.
Jasper Lievisse Adriaanse [Thu, 26 Apr 2012 17:50:17 +0000 (19:50 +0200)]
Fix include order; fixes build on OpenBSD.

12 years agoAdd some extra paths if we're compiling on OpenBSD.
Jasper Lievisse Adriaanse [Thu, 26 Apr 2012 17:49:48 +0000 (19:49 +0200)]
Add some extra paths if we're compiling on OpenBSD.

12 years agoAdded %emptytime to the battery part
Thorsten Töpper [Thu, 26 Apr 2012 19:51:15 +0000 (21:51 +0200)]
Added %emptytime to the battery part

12 years agoadd yajl compat code
Michael Stapelberg [Sun, 8 Apr 2012 12:05:47 +0000 (14:05 +0200)]
add yajl compat code

12 years agodebian: recommend libcap2-bin only on linux, recommend/enhance i3-wm (i3bar)
Michael Stapelberg [Sun, 25 Mar 2012 20:12:30 +0000 (22:12 +0200)]
debian: recommend libcap2-bin only on linux, recommend/enhance i3-wm (i3bar)