]> git.sur5r.net Git - u-boot/log
u-boot
11 years agotools: mxsboot: Staticize functions
Marek Vasut [Tue, 27 Aug 2013 21:32:37 +0000 (23:32 +0200)]
tools: mxsboot: Staticize functions

Make remaining non-static functions static and the same for vars.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
11 years agotools: Sort lists of files in Makefile
Marek Vasut [Mon, 26 Aug 2013 18:43:34 +0000 (20:43 +0200)]
tools: Sort lists of files in Makefile

Fix the lists of files so they are in order again.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Stefano Babic <sbabic@denx.de>
11 years agoARM: mxs: tools: Add mkimage support for MXS bootstream
Marek Vasut [Mon, 26 Aug 2013 18:43:33 +0000 (20:43 +0200)]
ARM: mxs: tools: Add mkimage support for MXS bootstream

Add mkimage support for generating and verifying MXS bootstream.
The implementation here is mostly a glue code between MXSSB v0.4
and mkimage, but the long-term goal is to rectify this and merge
MXSSB with mkimage more tightly. Once this code is properly in
U-Boot, MXSSB shall be deprecated in favor of mkimage-mxsimage
support.

Note that the mxsimage generator needs libcrypto from OpenSSL, I
therefore enabled the libcrypto/libssl unconditionally.

MXSSB: http://git.denx.de/?p=mxssb.git;a=summary

The code is based on research presented at:
http://www.rockbox.org/wiki/SbFileFormat

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
11 years agoimx: add status reporting for HAB status
Stefano Babic [Thu, 27 Jun 2013 22:20:21 +0000 (00:20 +0200)]
imx: add status reporting for HAB status

Add functions to report the HAB (High Assurance Boot) status
of e.g. i.MX6 CPUs.

This is taken from

git://git.freescale.com/imx/uboot-imx.git branch imx_v2009.08_3.0.35_4.0.0
cpu/arm_cortexa8/mx6/generic.c
include/asm-arm/arch-mx6/mx6_secure.h

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agotools: add support for setting the CSF into imximage
Stefano Babic [Thu, 27 Jun 2013 09:42:38 +0000 (11:42 +0200)]
tools: add support for setting the CSF into imximage

Add support for setting the CSF (Command Sequence File) pointer
which is used for HAB (High Assurance Boot) in the imximage by
adding e.g.

CSF 0x2000

in the imximage.cfg file.

This will set the CSF pointer accordingly just after the padded
data image area. The boot_data.length is adjusted with the
value from the imximage.cfg config file.

The resulting u-boot.imx can be signed with the FSL HAB tooling.
The generated CSF block needs to be appended to the u-boot.imx.

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agotools: add padding of data image file for imximage
Stefano Babic [Mon, 19 Aug 2013 17:03:20 +0000 (19:03 +0200)]
tools: add padding of data image file for imximage

Implement function vrec_header to be able to pad the final
data image file according the what has been calculated for
boot_data.length.

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agotools: add variable padding of data image in mkimage
Stefano Babic [Mon, 19 Aug 2013 17:03:19 +0000 (19:03 +0200)]
tools: add variable padding of data image in mkimage

Use previously unused return value of function vrec_header
to return a padding size to generic mkimage. This padding
size is used in copy_files to pad with zeros after copying
the data image.

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agotools: dynamically allocate imx_header in imximage
Stefano Babic [Wed, 26 Jun 2013 21:50:06 +0000 (23:50 +0200)]
tools: dynamically allocate imx_header in imximage

Change to dynamically allocate the imx_header to correctly
allocate the IVT, Boot Data and DCD at correct locations
depending on the boot media.

Also check that the Image Vector Table Offset + IVT +
Boot Data + DCD <= Initial Load Region Size.

Previously struct imx_header was always 4096 bytes and was
not dealing correctly with the Image Vector Table Offset.

Now, the memory allocation looks for e.g. SD boot like this

 Storage   u-boot.imx                             RAM
 Device

 00000000                                         177ff000 <--------------
                                                                         |
 00000400  00000000  d1 00 20 40 IVT.header       177ff400 <-------      |
 00000404  00000004  00 00 80 17 IVT.entry        177ff404 -----------   |
 00000408  00000008  00 00 00 00 IVT.reserved1    177ff408        |  |   |
 0000040C  0000000C  2c f4 7f 17 IVT.dcd          177ff40C ------ |  |   |
 00000410  00000010  20 f4 7f 17 IVT.boot         177ff410 ---- | |  |   |
 00000414  00000014  00 f4 7f 17 IVT.self         177ff414 --------  |   |
 00000418  00000018  00 00 00 00 IVT.csf          177ff418    | |    |   |
 0000041C  0000001C  00 00 00 00 IVT.reserved2    177ff41C    | |    |   |
 00000420  00000020  00 f0 7f 17 BootData.start   177ff420 <--- |    | ---
 00000424  00000024  00 60 03 00 BootData.length  177ff424      |    |
 00000428  00000028  00 00 00 00 BootData.plugin  177ff428      |    |
 0000042C  0000002C  d2 03 30 40 DCD.header       177ff42C <-----    |
 ...                                                                 |
 00001000  00000c00  13 00 00 ea U-Boot Start     17800000 <----------

While at it also remove the unused #define HEADER_OFFSET.

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agotools: rename mximage_flash_offset to imximage_ivt_offset
Stefano Babic [Wed, 26 Jun 2013 16:08:37 +0000 (18:08 +0200)]
tools: rename mximage_flash_offset to imximage_ivt_offset

This better reflects the naming from the Reference Manual
as well as fits better since "flash" is not really applicabe
for SATA.

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agotools: imx_header should not include flash_offset
Stefano Babic [Wed, 26 Jun 2013 15:26:27 +0000 (17:26 +0200)]
tools: imx_header should not include flash_offset

Doing a  make distclean; make mx6qsabresd_config; make
and      hexdump -C u-boot.imx | less

 ...
 00000360  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
 *
 000003f0  00 00 00 00 00 00 00 00  00 00 00 00 00 04 00 00  |................|
                                                ^^^^^^^^^^^
 00000400  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
 *
 00001000  13 00 00 ea 14 f0 9f e5  14 f0 9f e5 14 f0 9f e5  |...ê.ð.å.ð.å.ð.å|
 ...

shows the flash_offset value being written into the final
generated image, wich is not correct.

Instead create flash_offset as static variable such that the
generated image is "clean".

 00000360  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
 *
 00001000  13 00 00 ea 14 f0 9f e5  14 f0 9f e5 14 f0 9f e5  |...ê.ð.å.ð.å.ð.å|

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agommc: mxsmmc: Enable MMC HC support
Amaury Pouly [Thu, 1 Aug 2013 14:21:00 +0000 (16:21 +0200)]
mmc: mxsmmc: Enable MMC HC support

Enable support for high-capacity eMMC and MMC cards. The MXS MMC
driver has no problem with those.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Amaury Pouly <amaury.pouly@gmail.com>
Cc: Andy Fleming <afleming@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
11 years agofec_mxc: set ethaddr if fuses burned and not previously set
Eric Nelson [Fri, 2 Aug 2013 17:37:00 +0000 (10:37 -0700)]
fec_mxc: set ethaddr if fuses burned and not previously set

Without this change, the following message is generated:
Warning: FEC using MAC address from net device

See doc/README.enetaddr for details.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
11 years agoARM: mxs: Add mx28evk_auart_console target
Andreas Wass [Fri, 16 Aug 2013 16:24:37 +0000 (18:24 +0200)]
ARM: mxs: Add mx28evk_auart_console target

The target uses AUART 3 instead of the DUART for console output.

Signed-off-by: Andreas Wass <andreas.wass@dalelven.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Marek Vasut <marex@denx.de>
11 years agoARM: mxs: Added application UART driver
Andreas Wass [Wed, 14 Aug 2013 21:45:03 +0000 (23:45 +0200)]
ARM: mxs: Added application UART driver

The driver makes it possible to use an application UART as
the U-Boot output console for Freescale i.MX23/i.MX28 devices.

Signed-off-by: Andreas Wass <andreas.wass@dalelven.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
11 years agoi.MX6: nitrogen6x: force HDMI onto IPU0/DI0
Eric Nelson [Tue, 20 Aug 2013 18:44:43 +0000 (11:44 -0700)]
i.MX6: nitrogen6x: force HDMI onto IPU0/DI0

Our Linux kernel switches the HDMI connector onto IPU0/DI1,
but the U-Boot display driver only supports IPU0/DI0 for the
time being.

Because of this, a soft re-boot will leave the HDMI output
connected to the wrong display port and prevent video from
being displayed.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
11 years agoMerge git://git.denx.de/u-boot-arm
Stefano Babic [Wed, 31 Jul 2013 09:30:38 +0000 (11:30 +0200)]
Merge git://git.denx.de/u-boot-arm

Conflicts:
board/freescale/mx6qsabrelite/Makefile
board/freescale/mx6qsabrelite/mx6qsabrelite.c
include/configs/mx6qsabrelite.h

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agogpio: omap5-uevm: Configure the tca6424 gpio expander
Dan Murphy [Thu, 11 Jul 2013 18:10:28 +0000 (13:10 -0500)]
gpio: omap5-uevm: Configure the tca6424 gpio expander

Configure the tca6424 gpio expander
This allows use of the debug and tri color LEDs.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
11 years agogpio: tca642x: Add the tca642x gpio expander driver
Dan Murphy [Thu, 11 Jul 2013 18:10:27 +0000 (13:10 -0500)]
gpio: tca642x: Add the tca642x gpio expander driver

Add the tca642x gpio expander driver

Datasheet:
http://www.ti.com/product/tca6424a

Signed-off-by: Dan Murphy <dmurphy@ti.com>
11 years agoam335x_evm: Add am335x_boneblack variant
Justin Waters [Thu, 11 Jul 2013 13:55:03 +0000 (09:55 -0400)]
am335x_evm: Add am335x_boneblack variant

The BeagleBone Black differs from the other AM335x boards in a few
significant ways, so it makes sense to create a custom configuration
for it. In particular, it uses eMMC instead of NAND flash.

Signed-off-by: Justin Waters <justin.waters@timesys.com>
11 years agoam335x_evm: Add support for eMMC environment
Justin Waters [Thu, 11 Jul 2013 13:55:02 +0000 (09:55 -0400)]
am335x_evm: Add support for eMMC environment

Some boards, such as the BeagleBone Black, have an eMMC chip intstead
of NAND. We can use the eMMC boot partition to store the environment,
since it isn't used for anything else. This allows us to have a
configurable environment on those boards.

Signed-off-by: Justin Waters <justin.waters@timesys.com>
11 years agoAdd additional MLO images to .gitignore
Justin Waters [Thu, 11 Jul 2013 13:55:01 +0000 (09:55 -0400)]
Add additional MLO images to .gitignore

This rule catches images such as MLO.byteswap

Signed-off-by: Justin Waters <justin.waters@timesys.com>
11 years agoam335x_evm: Rework bootcmd to handle two MMC devs
Justin Waters [Thu, 11 Jul 2013 13:55:00 +0000 (09:55 -0400)]
am335x_evm: Rework bootcmd to handle two MMC devs

The BeagleBone Black can boot from either the MMC card
or eMMC chip on board. We should try both interfaces.

This modification also allows a graceful fallback if
a device exists but boot images are not present on it.

Changes for v2:

* Fix boot partition - it should always show up as mmcblk0p2
* Fix missing FDT load

Signed-off-by: Justin Waters <justin.waters@timesys.com>
11 years agoam335x_evm: Add command line editing
Justin Waters [Thu, 11 Jul 2013 13:54:59 +0000 (09:54 -0400)]
am335x_evm: Add command line editing

Many modern U-Boot ports enable command line editing and
a history buffer. The am335x_evm configuration is fairly
comprehensive as it is, so a few extra kb should not be
noticable, and it adds a very convenient feature.

Signed-off-by: Justin Waters <justin.waters@timesys.com>
11 years agoam335x_evm: Make NAND support modular
Justin Waters [Thu, 11 Jul 2013 13:54:58 +0000 (09:54 -0400)]
am335x_evm: Make NAND support modular

Give the user the ability to disable NAND support by defining
CONFIG_NO_NAND. This will allow custom hardware to easily support
this configuration.

Signed-off-by: Justin Waters <justin.waters@timesys.com>
[trini: Make apply on top of other series]
Signed-off-by: Tom Rini <trini@ti.com>
11 years agonet, phy, cpsw: fix gigabit register access
Heiko Schocher [Tue, 23 Jul 2013 13:32:36 +0000 (15:32 +0200)]
net, phy, cpsw: fix gigabit register access

accessing a lan9303 switch with the cpsw driver results in wrong
speed detection, as the switch sets the BMSR_ERCAP in BMSR
register, and follow read of the MII_STAT1000 register fails, as
the switch does not support it. Current code did not check,
if a phy_read() fails ... fix this.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoboard/ti/am335x/README: Document NOR programming
Tom Rini [Thu, 18 Jul 2013 19:13:05 +0000 (15:13 -0400)]
board/ti/am335x/README: Document NOR programming

The Beaglebone White may be populated with a memory cape that has a NOR
module.  Document how to program it.

Signed-off-by: Tom Rini <trini@ti.com>
11 years agoam335x_evm: Add support to boot from NOR.
Steve Kipisz [Thu, 18 Jul 2013 19:13:04 +0000 (15:13 -0400)]
am335x_evm: Add support to boot from NOR.

NOR requires that s_init be within the first 4KiB of the image so that
we can perform the rest of the required pinmuxing to talk with the rest
of NOR that we are found on.  When NOR_BOOT is set we save our
environment in NOR at 512KiB and a redundant copy at 768KiB.  We avoid
using SPL for this case and u-boot.bin is written directly to the start
of NOR.

We enclose the DMM-related parts of arch/arm/cpu/armv7/am33xx/emif4.c
with TI81xx checks as at this time U-Boot does not discard unused
sections in the main build and this code relies on functions specific to
(and only provided in) ti81xx-related code.

Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoam335x_evm: Add support for the NOR module on the memory cape
Steve Kipisz [Thu, 18 Jul 2013 19:13:03 +0000 (15:13 -0400)]
am335x_evm: Add support for the NOR module on the memory cape

This patch adds support for the NOR module that attaches
to the memory cape for a Beaglebone board. This does not
add booting support; only support so that you can boot from
SD/MMC and see the NOR module so that it can be programmed.

Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
[trini: Clean up config changes slightly]
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoam33xx: Correct gpmc_cfg->irqstatus/enable
Tom Rini [Thu, 18 Jul 2013 19:13:02 +0000 (15:13 -0400)]
am33xx: Correct gpmc_cfg->irqstatus/enable

Based on our usage of the GPMC, either with NOR or NAND we do not need
to be setting the irqstatus or irqenable bits and should clear them like
we have historically.

Signed-off-by: Tom Rini <trini@ti.com>
11 years agoam335x_evm: Rework board_is_foo() checks
Tom Rini [Thu, 18 Jul 2013 19:13:01 +0000 (15:13 -0400)]
am335x_evm: Rework board_is_foo() checks

We rework the various board_is_foo() checks to take a pointer to
struct am335x_baseboard_id rather than using a local copy in board.c.
This allows us to make use of the same checks in mux.c as well as fixing
problems when this code could be running from read-only memory.

Reviewed-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoam335x_evm: Update SPI_BOOT support, add MTDPARTS info
Tom Rini [Thu, 18 Jul 2013 19:12:59 +0000 (15:12 -0400)]
am335x_evm: Update SPI_BOOT support, add MTDPARTS info

- Style cleanup (# define -> #define)
- Due to ROM issues, redudant loading isn't feasible, so drop.
- Given extra space, increase max size of U-Boot to 512KiB
- Correct env size to match usage (we had not re-defined ENV_SIZE).
- Given extra space, keep env size as 128KiB, add redundant environment.

Reviewed-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoam335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE
Tom Rini [Thu, 18 Jul 2013 19:12:58 +0000 (15:12 -0400)]
am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE

We always set a CONFIG_ENV_IS_...somewhere... so drop the initial define
of NOWHERE.

Reviewed-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoboard/ti/am335x/README: Document NAND programming
Tom Rini [Wed, 17 Jul 2013 16:24:30 +0000 (12:24 -0400)]
board/ti/am335x/README: Document NAND programming

The AM335x GP EVM ships with NAND.  Document programming of the chip
including the redundant locations that the ROM will check.

Signed-off-by: Tom Rini <trini@ti.com>
11 years agomxc_ipuv3: fix memory alignment of framebuffer
Eric Nelson [Sat, 27 Jul 2013 00:53:45 +0000 (17:53 -0700)]
mxc_ipuv3: fix memory alignment of framebuffer

The frame-buffer on i.MX boards needs to be aligned for DMA.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
11 years agoimx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors
Robert Winkler [Tue, 23 Jul 2013 22:07:56 +0000 (15:07 -0700)]
imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors

A little background is probably appropriate for this patch.

Since "the beginning" of usage of the SABRE Lite and Nitrogen6x
boards, DVI detection has been somewhat broken.

Some (most) DVI monitors don't produce the "HPD" bit in
the PHY_STAT0 register, but do show proper toggling of the
RX_SENSE0..3 bits.

Creating a new the bit-mask to include all five bits and
modifying the 'hdmidet' command and internal detection
routines allows these monitors to function properly in U-Boot.

A related patch to our kernels allows things to work under
Linux:
        https://github.com/boundarydevices/linux-imx6/commit/7d8752905c118af9063738a533227de0b2f6ecd4

Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
11 years agoimx: Add documentation for imx specific commands
Robert Winkler [Thu, 25 Jul 2013 00:57:06 +0000 (17:57 -0700)]
imx: Add documentation for imx specific commands

CONFIG_CMD_HDMIDETECT
CONFIG_CMD_BMODE

Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
11 years agomx6qsabresd: Add splash screen support via HDMI
Pardeep Kumar Singla [Thu, 25 Jul 2013 17:12:14 +0000 (12:12 -0500)]
mx6qsabresd: Add splash screen support via HDMI

Signed-off-by: Pardeep Kumar Singla <b45784@freescale.com>
11 years agomx6: Factor out common HDMI setup code
Pardeep Kumar Singla [Thu, 25 Jul 2013 17:12:13 +0000 (12:12 -0500)]
mx6: Factor out common HDMI setup code

Instead of duplicating HDMI setup code for every mx6 board, factor out the common code

Signed-off-by: Pardeep Kumar Singla <b45784@freescale.com>
Acked-By: Eric Nelson <eric.nelson@boundarydevices.com>
11 years agoomap3_beagle: support booting from zImage and device tree as last option
Nishanth Menon [Mon, 15 Jul 2013 12:11:33 +0000 (07:11 -0500)]
omap3_beagle: support booting from zImage and device tree as last option

If no other bootoption works, try loading up device tree and zImage.

This is selected as the last option to allow backward compatibility as
well as support the recent trend in moving kernel boot to using zImage
and device tree.

NOTE: if uImage is present in bootpart, it will try this first and
will assume this is to be booted with bootm (so may be concatenated
image or plain vanilla ATAG MACHINE_ID based image)

Signed-off-by: Nishanth Menon <nm@ti.com>
11 years agoomap3_beagle: support findfdt and loadfdt for devicetree support
Nishanth Menon [Mon, 15 Jul 2013 12:11:32 +0000 (07:11 -0500)]
omap3_beagle: support findfdt and loadfdt for devicetree support

For folks not using concatenated device tree with uImage, having
an handy function to find and load device tree is very handy.

So introduce findfdt and loadfdt and run findfdt by default to make
it easier on user scripts.

Signed-off-by: Nishanth Menon <nm@ti.com>
11 years agoomap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk
Nishanth Menon [Mon, 15 Jul 2013 12:11:31 +0000 (07:11 -0500)]
omap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk

CMD_FS_GENERIC allows us to simplify where we load up our image from
either from ext2/fat etc. So, lets use that instead of cumbersome
options we currently use. Sticking with existing conventions,
defaults will be:
ramdisk=ramdisk.gz
bootpart=0:2 (second partition)
bootdir=/boot (/boot in second partition)

This matches with the default behavior, these can be overriden by
env files as needed.

Signed-off-by: Nishanth Menon <nm@ti.com>
11 years agobeagleboard: remove RevB support for BeagleBoard Xm
Nishanth Menon [Mon, 15 Jul 2013 12:11:30 +0000 (07:11 -0500)]
beagleboard: remove RevB support for BeagleBoard Xm

As reported in http://marc.info/?l=u-boot&m=137358037827735&w=2

There is no need for the "xMB" variant, as the gpio pins used for
identification where never changed from the xMA when the newer silcon
was used for the xMB, So rename XM A revision as AB revision
and report accordingly

Reported-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
11 years agoomap3_beagle: replace uImage.beagle with generic uImage
Nishanth Menon [Mon, 15 Jul 2013 12:11:29 +0000 (07:11 -0500)]
omap3_beagle: replace uImage.beagle with generic uImage

e682930867f7dfc4a01784fe452fad9e962d65a
(BeagleBoard: config: use uImage.beagle for tftp)

Introduced uImage.beagle which does not happen to be default output
file of Linux kernel build make uImage (output is uImage).

So, replace uImage.beagle with uImage

Signed-off-by: Nishanth Menon <nm@ti.com>
11 years agoomap3_beagle: remove JFFS2 support.
Nishanth Menon [Mon, 15 Jul 2013 12:11:28 +0000 (07:11 -0500)]
omap3_beagle: remove JFFS2 support.

We do not use JFFS2 by default and it conflicts with
CONFIG_CMD_FS_GENERIC (ls command is the same). Since most of our
BOOTCMD can be simplified by using the FS_GENERIC, dropping JFFS2

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Joel Fernandes <joelf@ti.com>
11 years agoARM: DRA7xx: Enable CPSW Ethernet support
Mugunthan V N [Mon, 8 Jul 2013 10:34:43 +0000 (16:04 +0530)]
ARM: DRA7xx: Enable CPSW Ethernet support

Enabling CPSW Ethernet support in DRA7xx EVM.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
11 years agoARM: DRA7xx: Add CPSW and MDIO pinmux support
Mugunthan V N [Mon, 8 Jul 2013 10:34:42 +0000 (16:04 +0530)]
ARM: DRA7xx: Add CPSW and MDIO pinmux support

Adding CPSW Slave 0 and MDIO pinmux support for DRA7xx EVM

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
11 years agoARM: DRA7xx: Add CPSW support to DRA7xx EVM
Mugunthan V N [Mon, 8 Jul 2013 10:34:41 +0000 (16:04 +0530)]
ARM: DRA7xx: Add CPSW support to DRA7xx EVM

Adding support for CPSW Ethernet support found in DRA7xx EVM

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
11 years agoARM: DRA7xx: Enable GMAC clock control
Mugunthan V N [Mon, 8 Jul 2013 10:34:40 +0000 (16:04 +0530)]
ARM: DRA7xx: Enable GMAC clock control

Enabling CPSW module by enabling GMAC clock control

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
11 years agoARM: DRA7xx: Lock DPLL_GMAC
Lokesh Vutla [Mon, 8 Jul 2013 10:34:39 +0000 (16:04 +0530)]
ARM: DRA7xx: Lock DPLL_GMAC

Locking DPLL_GMAC

[mugunthanvnm@ti.com:Configure only if CPSW is selected]

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
11 years agodrivers: net: cpsw: Enable statistics for all port
Mugunthan V N [Mon, 8 Jul 2013 10:34:38 +0000 (16:04 +0530)]
drivers: net: cpsw: Enable statistics for all port

Enable hardware statistics for all ports, enabling only to host port is useless

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
11 years agodrivers: net: cpsw: remove hard coding bd ram for cpsw
Mugunthan V N [Mon, 8 Jul 2013 10:34:37 +0000 (16:04 +0530)]
drivers: net: cpsw: remove hard coding bd ram for cpsw

BD ram address may vary in various SOC, so removing the hardcoding and
passing the same information through platform data

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
11 years agoam335x_evm: Add basic README
Tom Rini [Mon, 8 Jul 2013 16:15:18 +0000 (12:15 -0400)]
am335x_evm: Add basic README

Add a README for the family of boards the am335x_evm covers, and include
instructions on preparing and using falcon mode, for various media.

Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-by: Peter Korsgaard <jacmet@sunsite.dk>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
11 years agoam335x_evm: Correct CONFIG_CMD_SPL_WRITE_SIZE
Tom Rini [Mon, 8 Jul 2013 16:15:17 +0000 (12:15 -0400)]
am335x_evm: Correct CONFIG_CMD_SPL_WRITE_SIZE

We use CONFIG_CMD_SPL_WRITE_SIZE when reading/writing the args portion
of falcon mode to NAND.  Previously it was half the size of the
eraseblock which is too small, increase to eraseblock size.

Signed-off-by: Tom Rini <trini@ti.com>
11 years agoam335x_evm: Update eMMC falcon mode locations
Tom Rini [Mon, 8 Jul 2013 16:15:16 +0000 (12:15 -0400)]
am335x_evm: Update eMMC falcon mode locations

The previous location used for the "args" portion of falcon mode was too
small to allow for a device tree to be saved there, so move the location
slightly and increase the size.  In addition, our previous kernel
location was part of the area we set aside for U-Boot itself, so move it
up a bit higher.

Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-by: Peter Korsgaard <jacmet@sunsite.dk>
11 years agoam335x_evm: Correct DFU ALT settings for falcon mode
Tom Rini [Mon, 8 Jul 2013 16:15:15 +0000 (12:15 -0400)]
am335x_evm: Correct DFU ALT settings for falcon mode

Now that we have falcon mode enabled, the partiton numbers for NAND have
changed, and we need to list entries for updating these parts of the
system.  While adding falcon mode entires for eMMC (raw), we round up
the limit on U-Boot for ease of math later.

Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-by: Peter Korsgaard <jacmet@sunsite.dk>
11 years agoREADME.falcon: Note how we determine if we can boot the OS or not
Tom Rini [Mon, 8 Jul 2013 16:15:14 +0000 (12:15 -0400)]
README.falcon: Note how we determine if we can boot the OS or not

Reviewed-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoomap3/sys_info: fix printout of OMAP36XX L3 freqency
Andreas Bießmann [Mon, 8 Jul 2013 13:21:34 +0000 (15:21 +0200)]
omap3/sys_info: fix printout of OMAP36XX L3 freqency

The OMAP36xx/OMAP37xx family uses L3 frequency of 200MHz instead of 165MHz
used by OMAP34xx/OMAP35xx.

Also fix checkpatch warning about alignment.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
11 years agospl_mmc.c: Detect missing kernel image in RAW MMC
Tom Rini [Fri, 28 Jun 2013 18:43:01 +0000 (14:43 -0400)]
spl_mmc.c: Detect missing kernel image in RAW MMC

Currently, we assume that if we can read from MMC correctly, we have
found a valid image.  This is not the case as an empty area will read
just fine.  Add a check for a valid IH_MAGIC.

Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-by: Peter Korsgaard <jacmet@sunsite.dk>
11 years agoda850evm: Use clrbits function with correct endianess
Christian Riesch [Fri, 14 Jun 2013 12:22:36 +0000 (14:22 +0200)]
da850evm: Use clrbits function with correct endianess

The current code uses clrbits_be32 which is incorrect since we are on
a little endian machine here. This patch fixes this issue and also removes
some unnecessary code: Reading the current GPIO bank state is not required
if we are using the SET and CLEAR GPIO registers for setting/clearing
bits.

Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: Nagabhushana Netagunte <nagabhushana.netagunte@ti.com>
Cc: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
11 years agoarm: omap3: spl: Fix problem with 8bit NAND devices
Stefan Roese [Fri, 14 Jun 2013 08:55:00 +0000 (10:55 +0200)]
arm: omap3: spl: Fix problem with 8bit NAND devices

Currently in OMAP3 SPL, the GPMC for NAND is configured for 16bit
access. This patch adds support for 8bit NAND devices as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@ti.com>
11 years agomx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x
Fabio Estevam [Fri, 26 Jul 2013 14:37:17 +0000 (11:37 -0300)]
mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x

mx6qsabrelite and nitrogen6q boards are hardware compatible, so let's avoid the
code duplication and only use the nitrogen6x source code to make board code
maintainance easier.

Tested booting a mainline device tree kernel on a mx6qsabrelite board.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
11 years agoMerge branch 'u-boot/master' into u-boot-arm/master
Albert ARIBAUD [Thu, 25 Jul 2013 15:57:46 +0000 (17:57 +0200)]
Merge branch 'u-boot/master' into u-boot-arm/master

11 years agoMerge branch 'master' of git://git.denx.de/u-boot-nds32
Tom Rini [Thu, 25 Jul 2013 12:22:08 +0000 (08:22 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-nds32

11 years agoqemu-malta: Update for SPDX license identifiers
Tom Rini [Wed, 24 Jul 2013 13:34:30 +0000 (09:34 -0400)]
qemu-malta: Update for SPDX license identifiers

Signed-off-by: Tom Rini <trini@ti.com>
11 years agoMerge branch 'master' of git://git.denx.de/u-boot-mips
Tom Rini [Wed, 24 Jul 2013 13:30:46 +0000 (09:30 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-mips

Conflict over SPDX changes means that one change was effectively dropped
as it was fixing typos in a removed hunk of text.

Conflicts:
arch/mips/cpu/mips64/start.S

Signed-off-by: Tom Rini <trini@ti.com>
11 years agodrivers/i2c: Update fti2c010.[ch], i2c_core.c to use SPDX identifiers
Tom Rini [Wed, 24 Jul 2013 13:25:40 +0000 (09:25 -0400)]
drivers/i2c: Update fti2c010.[ch], i2c_core.c to use SPDX identifiers

Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agosocfpga: Move board/socfpga_cyclone5 to board/socfpga
Dinh Nguyen [Tue, 2 Jul 2013 22:00:18 +0000 (17:00 -0500)]
socfpga: Move board/socfpga_cyclone5 to board/socfpga

Because the SOCFPGA platform will include support for Cyclone V and
Arria V FPGA parts, renaming socfpga_cyclone5 folder to socfpga to
be more generic.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Wolfgang Denk <wd@denx.de>
CC: Pavel Machek <pavel@denx.de>
Cc: Tom Rini <trini@ti.com>
v2:
- Add Reviewed-by: Pavel Machek
- Cc: Tom Rini

11 years agonds32: Enable FPU if the version of CPU supported
ken kuo [Wed, 24 Jul 2013 18:17:11 +0000 (02:17 +0800)]
nds32: Enable FPU if the version of CPU supported

Some version of Andes core support FPU coprocessor,
if this is the case, and toolchain support FPU instruction set,
we should enable it at low level initialization time.

Signed-off-by: Kuan-Yu Kuo <ken.kuoky@gmail.com>
Cc: Macpaul Lin <macpaul@gmail.com>
11 years agonds32: Update <asm/io.h> and <asm/setup.h> with SPDX license identifiers
Tom Rini [Wed, 24 Jul 2013 13:39:00 +0000 (09:39 -0400)]
nds32: Update <asm/io.h> and <asm/setup.h> with SPDX license identifiers

Signed-off-by: Tom Rini <trini@ti.com>
11 years agonds32: Convert Makefiles to use COBJS-y style
ken kuo [Wed, 24 Jul 2013 18:24:54 +0000 (02:24 +0800)]
nds32: Convert Makefiles to use COBJS-y style

Signed-off-by: Kuan-Yu Kuo <ken.kuoky@gmail.com>
Cc: Macpaul Lin <macpaul@gmail.com>
11 years agohighbank: enable keyed autoboot stop
Rob Herring [Thu, 13 Jun 2013 03:24:54 +0000 (22:24 -0500)]
highbank: enable keyed autoboot stop

Restrict autoboot interruption to "s" or "d" keys. This will prevent some
unwanted stopping and also allow disabling the reset on command timeout.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
11 years agoARM: highbank: compile misc_init_r only if CONFIG_MISC_INIT_R
Rob Herring [Thu, 13 Jun 2013 03:24:53 +0000 (22:24 -0500)]
ARM: highbank: compile misc_init_r only if CONFIG_MISC_INIT_R

Compile misc_init_r only if CONFIG_MISC_INIT_R is enabled.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
11 years agoARM: highbank: setup peripherals based on power domain status
Rob Herring [Thu, 13 Jun 2013 03:24:52 +0000 (22:24 -0500)]
ARM: highbank: setup peripherals based on power domain status

Accessing powered down peripherals will hang the bus, so check power
domain status before initializing SATA and fixup the FDT to disable
unused peripherals.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
11 years agoARM: highbank: enable reset on command timeout
Rob Herring [Thu, 13 Jun 2013 03:24:51 +0000 (22:24 -0500)]
ARM: highbank: enable reset on command timeout

Enable resetting on command timeout. The timeout is set with environment
setting bootretry.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
11 years agoARM: highbank: avoid bss write in timer_init
Rob Herring [Thu, 13 Jun 2013 03:24:50 +0000 (22:24 -0500)]
ARM: highbank: avoid bss write in timer_init

The timer_init function is called before relocation and writes to bss data
were corrupting relocation data. Fix this by removing the call to
reset_timer_masked. The initial timer count should be 0 or near 0 anyway,
so initializing the variables are not needed.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
11 years agoARM: highbank: set timer prescaler to 256
Rob Herring [Thu, 13 Jun 2013 03:24:49 +0000 (22:24 -0500)]
ARM: highbank: set timer prescaler to 256

The 150MHz clock rate gives u-boot time functions problems and there's no
benefit to a fast clock, so lower the rate.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
11 years agoARM: highbank: fix get_tbclk value to timer rate
Rob Herring [Thu, 13 Jun 2013 03:24:48 +0000 (22:24 -0500)]
ARM: highbank: fix get_tbclk value to timer rate

get_tbclk should return the timer's frequency, not CONFIG_SYS_HZ.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
11 years agoARM: highbank: update config options
Rob Herring [Thu, 13 Jun 2013 03:24:47 +0000 (22:24 -0500)]
ARM: highbank: update config options

Various changes to highbank config:

Enable EFI partitions
Enable ext4 and FAT filesystems
Enable bootz command and raw initrd
Increase cmd and print buffer size to 1K
Change serial baudrate to 115200
Enable hush shell

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
11 years agonet: calxedaxgmac: enable rx cut-thru
Rob Herring [Thu, 13 Jun 2013 03:24:46 +0000 (22:24 -0500)]
net: calxedaxgmac: enable rx cut-thru

There is no reason to wait for the entire frame to start DMA on receive,
so enable rx cut-thru for better performance.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
11 years agoARM: move interrupt_init to before relocation
Rob Herring [Thu, 13 Jun 2013 03:24:45 +0000 (22:24 -0500)]
ARM: move interrupt_init to before relocation

interrupt_init also sets up the abort stack, but is not setup before
relocation. So any aborts during relocation will hang and not print out
any useful information. Fix this by moving the interrupt_init to after
the stack setup in board_init_f.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
11 years agoMIPS: mips32/cache.S: use v1 register for indirect function calls
Gabor Juhos [Thu, 13 Jun 2013 10:59:36 +0000 (12:59 +0200)]
MIPS: mips32/cache.S: use v1 register for indirect function calls

Synchronize the code with mips64/cache.S, in order to
allow further unifications.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: mips32/cache.S: store cache line size in t8 register
Gabor Juhos [Thu, 13 Jun 2013 10:59:35 +0000 (12:59 +0200)]
MIPS: mips32/cache.S: store cache line size in t8 register

Synchronize the code with mips64/cache.S, in order to
allow further unifications.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: mips32/cache.S: save return address in t9 register
Gabor Juhos [Thu, 13 Jun 2013 10:59:34 +0000 (12:59 +0200)]
MIPS: mips32/cache.S: save return address in t9 register

Synchronize the code with mips64/cache.S, in order to
allow further unifications.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: xburst/start.S: rework relocation info check
Gabor Juhos [Fri, 14 Jun 2013 12:47:10 +0000 (14:47 +0200)]
MIPS: xburst/start.S: rework relocation info check

Make it similar to the code in mips{32,64}/start.S, in order to
allow further unifications.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: xburst/start.S: use t8 register for dynamic relocation
Gabor Juhos [Thu, 13 Jun 2013 10:59:32 +0000 (12:59 +0200)]
MIPS: xburst/start.S: use t8 register for dynamic relocation

Synchronize the code with mips{32,64}/start.S, in order to
allow further unifications.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: xburst/start.S: save gd in s0 register
Gabor Juhos [Thu, 13 Jun 2013 10:59:31 +0000 (12:59 +0200)]
MIPS: xburst/start.S: save gd in s0 register

Synchronize the code with mips{32,64}/start.S, in order to
allow further unifications.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: xburst/start.S: save relocation offset in s1 register
Gabor Juhos [Thu, 13 Jun 2013 10:59:30 +0000 (12:59 +0200)]
MIPS: xburst/start.S: save relocation offset in s1 register

Synchronize the code with mips{32,64}/start.S, in order to
allow further unifications.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: xburst/start.S: save relocation address in s2 register
Gabor Juhos [Thu, 13 Jun 2013 10:59:29 +0000 (12:59 +0200)]
MIPS: xburst/start.S: save relocation address in s2 register

Synchronize the code with mips{32,64}/start.S, in order to
allow further unifications.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: mips32/start.S: rework relocation info check
Gabor Juhos [Thu, 13 Jun 2013 10:59:28 +0000 (12:59 +0200)]
MIPS: mips32/start.S: rework relocation info check

Make it similar to the code in mips64/start.S, in order to
allow further unifications.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: mips32/start.S: use t8 register for dynamic relocation
Gabor Juhos [Thu, 13 Jun 2013 10:59:27 +0000 (12:59 +0200)]
MIPS: mips32/start.S: use t8 register for dynamic relocation

Synchronize the code with mips64/start.S, in order to
allow further unifications.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: mips32/cache.S: remove superfluous register assignment
Gabor Juhos [Wed, 12 Jun 2013 16:02:46 +0000 (18:02 +0200)]
MIPS: mips32/cache.S: remove superfluous register assignment

The t4 register already holds the cache
line size, and the value of the register
is not changed in mips_init_icache.

Get the cache line size value from t4 for
mips_init_dcache as well and remove the
superfluous assignment of t5 register.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
11 years agoMIPS: remove obsolete TODO items
Gabor Juhos [Wed, 12 Jun 2013 16:02:45 +0000 (18:02 +0200)]
MIPS: remove obsolete TODO items

The MIPS  code uses centralized u-boot.lds script already,
and dynamic relocation is supported as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: mips64/interrupt.c: remove superfluous include
Gabor Juhos [Wed, 12 Jun 2013 16:02:44 +0000 (18:02 +0200)]
MIPS: mips64/interrupt.c: remove superfluous include

Nothing is used from asm/mipsregs.h.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: mips32/time.c: fix checkpatch errors/warnings
Gabor Juhos [Wed, 12 Jun 2013 16:02:43 +0000 (18:02 +0200)]
MIPS: mips32/time.c: fix checkpatch errors/warnings

Checking mips32/time.c with checkpatch.pl shows this:

  arch/mips/cpu/mips32/time.c:30: WARNING: line over 80 characters
  arch/mips/cpu/mips32/time.c:57: ERROR: return is not a function, parentheses are not required
  total: 1 errors, 1 warnings, 0 checks, 85 lines checked

Fix the code to make checkpatch.pl happy.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: qemu-malta: bring up ethernet
Gabor Juhos [Wed, 22 May 2013 03:57:44 +0000 (03:57 +0000)]
MIPS: qemu-malta: bring up ethernet

Qemu emulates a PCNET PCI card for the Malta CoreLV board.
Enable the pcnet driver and add board specific ethernet
initialization function to bring it up. Also enable the
CONFIG_CMD_NET and CONFIG_CMD_PING options.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: qemu-malta: add PCI support
Gabor Juhos [Wed, 22 May 2013 03:57:42 +0000 (03:57 +0000)]
MIPS: qemu-malta: add PCI support

Qemu emulates the Galileo GT64120 System Controller
which provides a CPU bus to PCI bus bridge.

The patch adds driver for this bridge and enables
PCI support for the emulated Malta board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: qemu-malta: setup GT64120 registers as done by YAMON
Gabor Juhos [Wed, 22 May 2013 03:57:41 +0000 (03:57 +0000)]
MIPS: qemu-malta: setup GT64120 registers as done by YAMON

Move the GT64120 register base to 0x1be00000
and setup PCI BAR registers as done by the
original YAMON bootloader.

This is needed for running Linux kernel.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: qemu-malta: enable flash support
Gabor Juhos [Wed, 22 May 2013 03:57:39 +0000 (03:57 +0000)]
MIPS: qemu-malta: enable flash support

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: qemu-malta: add reset support
Gabor Juhos [Wed, 22 May 2013 03:57:38 +0000 (03:57 +0000)]
MIPS: qemu-malta: add reset support

The MIPS Malta board has a SOFTRES register. Writing a
magic value into that register initiates a board reset.

Use this feature to implement reset support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
11 years agoMIPS: qemu-malta: add support for emulated MIPS Malta board
Gabor Juhos [Wed, 22 May 2013 03:57:37 +0000 (03:57 +0000)]
MIPS: qemu-malta: add support for emulated MIPS Malta board

Add minimal support for the MIPS Malta CoreLV board
emulated by Qemu. The only supported peripherial is
the UART.

This is enough to boot U-Boot to the command prompt
both in little and big endian mode.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>