]>
git.sur5r.net Git - openocd/log
dbrownell [Sun, 20 Sep 2009 07:46:22 +0000 (07:46 +0000)]
Minor regression bugfix for the jtag_tap_handle_event() case
for disabling TAPs. We don't actually know how to make any
JRCs which do that yet; but when we do, this will matter.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2735
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Sat, 19 Sep 2009 20:38:38 +0000 (20:38 +0000)]
Added CPUDBG_WCR_BASE define
git-svn-id: svn://svn.berlios.de/openocd/trunk@2734
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Sat, 19 Sep 2009 14:50:18 +0000 (14:50 +0000)]
Avoid cache invalidation when writing to hardware debug registers
git-svn-id: svn://svn.berlios.de/openocd/trunk@2733
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Sat, 19 Sep 2009 14:47:53 +0000 (14:47 +0000)]
Reduced sleep time after reset
git-svn-id: svn://svn.berlios.de/openocd/trunk@2732
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Sat, 19 Sep 2009 06:54:01 +0000 (06:54 +0000)]
Style cleanup for the updated ft2232_add_pathmove().
Indentation, whitespace, line lengths.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2731
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Sat, 19 Sep 2009 06:49:40 +0000 (06:49 +0000)]
Minor behavior fixes for the two JTAG reset events (C/internal,
and Tcl/external):
- Reorder so *both* paths (TCK/TMS or TRST) can enable TAPs with
ICEpick ... first C code flags TAPs that got disabled, then call
any Tcl code that might want to re-enable them.
- Always call the C/internal handlers when JTAG operations can be
issued; previously that wasn't done when TRST was used.
Plus some small cleanups (whitespace, strings, better messaging
during debug and on some errors) to reset-related code.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2730
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Sat, 19 Sep 2009 06:42:50 +0000 (06:42 +0000)]
Minor tweaks to description of JTAG adapter/dongle issues.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2729
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Fri, 18 Sep 2009 15:11:46 +0000 (15:11 +0000)]
Move Cortex A8 debug access initialisation from omap3530.cfg to cortex_a8.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@2728
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 18 Sep 2009 07:09:44 +0000 (07:09 +0000)]
remove unused externs
git-svn-id: svn://svn.berlios.de/openocd/trunk@2727
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Fri, 18 Sep 2009 00:11:51 +0000 (00:11 +0000)]
Tweak TCL reset script ... mostly improving descriptions of
the various steps, but also calling [target names] only once.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2726
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Thu, 17 Sep 2009 19:20:18 +0000 (19:20 +0000)]
Address codereview comment from Steve Grubb <sgrubb@redhat.com>:
avoid a duplicate test.
Plus other cleanup in the same code: be "static", sane line lengths
for source and diagnostics, and fix misleading variable names.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2725
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Thu, 17 Sep 2009 18:56:17 +0000 (18:56 +0000)]
Minor fixes to NAND code and docs
Erase logic:
- command invocation
+ treat "nand erase N" (no offset/length) as "erase whole chip N"
+ catch a few more bogus parameter cases, like length == 0 (sigh)
- nand_erase() should be static
- on error
+ say which block failed, and if it was a bad block
+ don't give up after the first error; try to erase the rest
- on success, say which nand device was erased (name isn't unique)
Device list ("nand list"):
- say how many blocks there are
- split summary into two lines
- give example in the docs
Doc tweaks:
- Use @option{...} for DaVinci's supported hardware ECC options
For the record, I've observed that _sometimes_ erasing bad blocks causes
failure reports, and that manufacturer bad block markers aren't always
erasable (even when erasing their blocks doesn't trigger an error report).
git-svn-id: svn://svn.berlios.de/openocd/trunk@2724
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Thu, 17 Sep 2009 18:52:32 +0000 (18:52 +0000)]
Fix coredump seen in some code paths.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2723
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 17 Sep 2009 12:25:53 +0000 (12:25 +0000)]
michal smulski <michal.smulski@ooma.com> fix regression in jtag_add_pathmove() which broke arm11 in r1825. Other uses of jtag_add_pathmove are svn + xsvf + xscale...
git-svn-id: svn://svn.berlios.de/openocd/trunk@2722
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 17 Sep 2009 11:44:14 +0000 (11:44 +0000)]
prefix zy1000_reboot command to avoid name conflicts
git-svn-id: svn://svn.berlios.de/openocd/trunk@2721
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 17 Sep 2009 11:23:41 +0000 (11:23 +0000)]
srst_gates_jtag option. at91sam9260 needs retesting, and possibly srst_gates_jtag added to reset_config. Could i.MX27 be a case where srst does not pull trst, but really srst gates jtag clock?
git-svn-id: svn://svn.berlios.de/openocd/trunk@2720
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Thu, 17 Sep 2009 08:02:43 +0000 (08:02 +0000)]
The "arm9tdmi.c" file is more of a generic ARM9 support file:
- update comments to say so.
- update docs to clarify that the "arm9tdmi" command prefix
is a misnomer.
- bugfix some messages that wrongly assume only ARM9TDMI
based processors use this code.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2719
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Thu, 17 Sep 2009 07:56:24 +0000 (07:56 +0000)]
Doc update: mention how ARM's WFI instruction affects
JTAG clocking by gating the core clock, and workarounds.
Most details are with the "halt" command, which is one
of the first places this issue will be noticed.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2718
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Wed, 16 Sep 2009 18:18:38 +0000 (18:18 +0000)]
Remove unused varables (moved to armv7a)
git-svn-id: svn://svn.berlios.de/openocd/trunk@2717
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Wed, 16 Sep 2009 18:17:26 +0000 (18:17 +0000)]
Use a variable armv7a->debug_base instead of hardedcoded OMAP3530_DEBUG_BASE
git-svn-id: svn://svn.berlios.de/openocd/trunk@2716
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 16 Sep 2009 12:38:26 +0000 (12:38 +0000)]
Rolf Meeser <rolfm_9dq@yahoo.de> adds flash support for NXP's LPC2900 family (ARM968E).
git-svn-id: svn://svn.berlios.de/openocd/trunk@2715
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Tue, 15 Sep 2009 16:20:39 +0000 (16:20 +0000)]
Define debug_base, debug_ap, memory_ap in armv7a_common_t
git-svn-id: svn://svn.berlios.de/openocd/trunk@2714
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Tue, 15 Sep 2009 15:50:09 +0000 (15:50 +0000)]
Updated mode string list.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2713
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Tue, 15 Sep 2009 15:41:14 +0000 (15:41 +0000)]
Definy symbolic values for VA to PA address translation operations
git-svn-id: svn://svn.berlios.de/openocd/trunk@2712
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 15 Sep 2009 14:20:37 +0000 (14:20 +0000)]
fix bug when using 32 instead of 64 bit value in callback, caught by -Wall
git-svn-id: svn://svn.berlios.de/openocd/trunk@2711
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 15 Sep 2009 09:41:09 +0000 (09:41 +0000)]
added embedded ice programming while srst is asserted todo item
git-svn-id: svn://svn.berlios.de/openocd/trunk@2710
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Mon, 14 Sep 2009 22:41:47 +0000 (22:41 +0000)]
Check return values to avoid infinite wait in loop on error.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2709
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Mon, 14 Sep 2009 22:36:27 +0000 (22:36 +0000)]
Cache invalidation when writing to memory
git-svn-id: svn://svn.berlios.de/openocd/trunk@2708
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 14 Sep 2009 13:54:49 +0000 (13:54 +0000)]
error message upon recursive invocation of reset from reset event handlers
git-svn-id: svn://svn.berlios.de/openocd/trunk@2707
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 14 Sep 2009 08:03:57 +0000 (08:03 +0000)]
fix email address
git-svn-id: svn://svn.berlios.de/openocd/trunk@2706
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 14 Sep 2009 07:48:28 +0000 (07:48 +0000)]
Rolf Meeser <rolfm_9dq@yahoo.de> warning fix in previous commit was wrong. target_code_size needs the real value later.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2705
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 14 Sep 2009 06:06:35 +0000 (06:06 +0000)]
fix warning
git-svn-id: svn://svn.berlios.de/openocd/trunk@2704
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 13 Sep 2009 20:07:13 +0000 (20:07 +0000)]
Magnus Lundin <lundin@mlu.mine.nu> Disable poll while core register initialization
git-svn-id: svn://svn.berlios.de/openocd/trunk@2703
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Sun, 13 Sep 2009 17:26:07 +0000 (17:26 +0000)]
More CortexA8 debug register definitions.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2702
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Sun, 13 Sep 2009 13:57:50 +0000 (13:57 +0000)]
Fix argument passing in cortex_a8_write_cp.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2701
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sat, 12 Sep 2009 13:05:20 +0000 (13:05 +0000)]
Dirk Behme <dirk.behme@googlemail.com> document post TAP reset event
git-svn-id: svn://svn.berlios.de/openocd/trunk@2700
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sat, 12 Sep 2009 08:11:45 +0000 (08:11 +0000)]
David Brownell <david-b@pacbell.net>
Update the board config for the DaVinci DM355 EVM so the reset-init
event handler does the rest of the work it should do:
- minor PLL setup bugfixes
- initialize the DDR2 controller
- probe both NAND banks
- initialize UART0
- enable the icache
git-svn-id: svn://svn.berlios.de/openocd/trunk@2699
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sat, 12 Sep 2009 08:10:19 +0000 (08:10 +0000)]
David Brownell <david-b@pacbell.net>
Cleanup some the downloaded ARM target algorithm code:
- Provide more complete disassembly of the DCC bulk write code
- Make code blocks "static const", in case GCC doesn't
- Fix some tabbing/layout issues
- Make some arm7_9_common.h flags be "bool" not "int"; and compact
the layout a bit (group most bools together)
git-svn-id: svn://svn.berlios.de/openocd/trunk@2698
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Sep 2009 21:14:31 +0000 (21:14 +0000)]
David Brownell <david-b@pacbell.net> some early todo items on run_algorithm
git-svn-id: svn://svn.berlios.de/openocd/trunk@2697
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Sep 2009 18:34:15 +0000 (18:34 +0000)]
tap post reset event added. Allows omap3530 to send 100 runtest idle tickle's after a TAP_RESET.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2696
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Fri, 11 Sep 2009 14:08:28 +0000 (14:08 +0000)]
- revert change made to sheevaplug.cfg in rev2573
git-svn-id: svn://svn.berlios.de/openocd/trunk@2695
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Sep 2009 08:04:50 +0000 (08:04 +0000)]
Nicolas Pitre <nico@cam.org> put feroceon target definition at the end so to avoid a
bunch of useless forward declarations.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2694
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Sep 2009 08:03:46 +0000 (08:03 +0000)]
Nicolas Pitre <nico@cam.org> Dragonite support
git-svn-id: svn://svn.berlios.de/openocd/trunk@2693
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Sep 2009 07:46:50 +0000 (07:46 +0000)]
spelling mistake
git-svn-id: svn://svn.berlios.de/openocd/trunk@2692
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Sep 2009 07:43:36 +0000 (07:43 +0000)]
do not use dynamically sized stack arrays, not compatible with embedded OS's
git-svn-id: svn://svn.berlios.de/openocd/trunk@2691
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Sep 2009 06:58:49 +0000 (06:58 +0000)]
registering a target event twice caused infinite loop. Same bug as in jtag/core.c copy & pasted.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2690
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Sep 2009 06:08:51 +0000 (06:08 +0000)]
syntax error fix
git-svn-id: svn://svn.berlios.de/openocd/trunk@2689
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Sep 2009 06:01:28 +0000 (06:01 +0000)]
Alexei Babich <a.babich@rez.ru> cleanup
git-svn-id: svn://svn.berlios.de/openocd/trunk@2688
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 11 Sep 2009 05:57:51 +0000 (05:57 +0000)]
Nicolas Pitre <nico@cam.org> tighten error checking in bulk_write
git-svn-id: svn://svn.berlios.de/openocd/trunk@2687
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 10 Sep 2009 13:35:08 +0000 (13:35 +0000)]
eol-style:native
git-svn-id: svn://svn.berlios.de/openocd/trunk@2686
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 10 Sep 2009 13:17:25 +0000 (13:17 +0000)]
Alexei Babich <a.babich@rez.ru> imx31 nand flash controller support
git-svn-id: svn://svn.berlios.de/openocd/trunk@2685
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 10 Sep 2009 13:17:05 +0000 (13:17 +0000)]
Alexei Babich <a.babich@rez.ru> fix problems with unecessary tailend byte accesses. Use 16 bit access on tailend of a memory read if possible.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2684
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 10 Sep 2009 08:06:22 +0000 (08:06 +0000)]
michal smulski <michal.smulski@ooma.com> telo target/board scripts
git-svn-id: svn://svn.berlios.de/openocd/trunk@2683
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 9 Sep 2009 16:11:33 +0000 (16:11 +0000)]
Rolf Meeser <rolfm_9dq@yahoo.de>
This patch adds target algorithm support for those flash devices that do not support DQ5 polling. So far they could only be programmed with host algorithm, but this was way too slow.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2682
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 9 Sep 2009 07:09:14 +0000 (07:09 +0000)]
- Fix bug-in-waiting when adding more than one TAP event type
- Infinite loop bugfix when running tap configure a second time
git-svn-id: svn://svn.berlios.de/openocd/trunk@2681
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 9 Sep 2009 06:28:49 +0000 (06:28 +0000)]
David Brownell <david-b@pacbell.net>
Optionally shave time off the armv4_5 run_algorithm() code: let
them terminate using software breakpoints, avoiding roundtrips
to manage hardware ones.
Enable this by using BKPT to terminate execution instead of "branch
to here" loops. Then pass zero as the exit address, except when
running on an ARMv4 core. ARM7TDMI, ARM9TDMI, and derived cores
now set a flag saying they're ARMv4.
Use that mechanism in arm_nandwrite(), for about 3% speedup on a
DaVinci ARM926 core; not huge, but it helps. Some other algorithms
could use this too (mostly flavors of flash operation).
git-svn-id: svn://svn.berlios.de/openocd/trunk@2680
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 9 Sep 2009 06:27:47 +0000 (06:27 +0000)]
David Brownell <david-b@pacbell.net>
Fix docs on ARM11 MCR and MRC coprocessor commands:
correct read-vs-write; and describe the params.
(ARM920 and ARM926 have cp15-specific commands; this
approach is more generic. MCR2, MRC2, MCRR, MCRR2,
MRRC, and MRRC2 instructions could also get exposed.)
git-svn-id: svn://svn.berlios.de/openocd/trunk@2679
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Tue, 8 Sep 2009 15:32:18 +0000 (15:32 +0000)]
Report correct core instruction state for ARMv/A targets
git-svn-id: svn://svn.berlios.de/openocd/trunk@2678
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Tue, 8 Sep 2009 15:31:24 +0000 (15:31 +0000)]
Load PC with bit 0 set to 1 when resuming to say in Thumb instruction state.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2677
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 8 Sep 2009 06:18:45 +0000 (06:18 +0000)]
David Brownell <david-b@pacbell.net>
Provide an "armv7a disassemble" command. Current omissions include
VFP (except as coprocessor instructions), Neon, and various Thumb2
opcodes that are not available in ARMv7-M processors.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2676
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 8 Sep 2009 06:17:33 +0000 (06:17 +0000)]
David Brownell <david-b@pacbell.net>
lean up some loose ends with the ARM disassembler
- Add a header comment describing its current state and uses
and referencing the now-generally-available V7 arch spec
- Support some mode switch instructions:
* Thumb to Jazelle (BXJ)
* Thumb to ThumbEE (ENTERX)
* ThumbEE to Thumb (LEAVEX)
- Improve that recent warning fix (and associated whitespace goof)
- Declare the rest of the internal code and data "static". A
compiler may use this, and it helps clarify the scope of these
routines (e.g. what changes to them could affect).
git-svn-id: svn://svn.berlios.de/openocd/trunk@2675
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
mlu [Mon, 7 Sep 2009 20:19:17 +0000 (20:19 +0000)]
Improved handling of instruction set state, helps for debugging Thumb state.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2674
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 4 Sep 2009 19:35:10 +0000 (19:35 +0000)]
Mahr, Stefan <Stefan.Mahr@sphairon.com> removes the endianness swapping in mips_m4k.c Swapping is already done in target.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@2673
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 4 Sep 2009 11:03:26 +0000 (11:03 +0000)]
use "armv4_5 core_state arm" instead of soft_reset_halt, fewer side effects
git-svn-id: svn://svn.berlios.de/openocd/trunk@2672
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 4 Sep 2009 08:27:27 +0000 (08:27 +0000)]
Dirk Behme <dirk.behme@googlemail.com> retire jtag_speed usage
git-svn-id: svn://svn.berlios.de/openocd/trunk@2671
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 4 Sep 2009 08:27:08 +0000 (08:27 +0000)]
Dirk Behme <dirk.behme@googlemail.com> Add default fall back freqency.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2670
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 4 Sep 2009 08:23:24 +0000 (08:23 +0000)]
set ARM mode using explicit command rather than soft_reset_halt which has lots of side effects.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2669
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 4 Sep 2009 08:22:02 +0000 (08:22 +0000)]
Matt Hsu <matt@0xlab.org> This patch simply enables the halting debug mode.
By enabling this bit, the processor halts when a debug event
such as breakpoint occurs.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2668
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 4 Sep 2009 08:21:18 +0000 (08:21 +0000)]
more debug output for breakpoints
git-svn-id: svn://svn.berlios.de/openocd/trunk@2667
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 4 Sep 2009 05:20:45 +0000 (05:20 +0000)]
Matt Hsu <matt@0xlab.org> Tidy up the bit-offset operation for DSCR register
git-svn-id: svn://svn.berlios.de/openocd/trunk@2666
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 4 Sep 2009 05:17:03 +0000 (05:17 +0000)]
David Brownell <david-b@pacbell.net> "set _TARGETNAME ..." cleanup
git-svn-id: svn://svn.berlios.de/openocd/trunk@2665
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 4 Sep 2009 05:14:32 +0000 (05:14 +0000)]
David Claffey <dnclaffey@gmail.com> get rid of reset recursion
git-svn-id: svn://svn.berlios.de/openocd/trunk@2664
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 3 Sep 2009 08:23:39 +0000 (08:23 +0000)]
David Brownell
Abstract the orion_nand_fast_block_write() routine into a separate
routine -- arm_nandwrite() -- so that other ARM cores can reuse it.
Have davinci_nand do so. This faster than byte-at-a-time ops by a
factor of three (!), even given the slowish interactions to support
hardware ECC (1-bit flavor in that test) each 512 bytes; those could
be read more efficiently by on-chip code.
NOTE that until there's a generic "ARM algorithm" structure, this
can't work on newer ARMv6 (like ARM1136) or ARMv7A (like Cortex-A8)
cores, though the downloaded code itself would work just fine there.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2663
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 2 Sep 2009 17:34:35 +0000 (17:34 +0000)]
David Claffey <dnclaffey@gmail.com> tested with the Atheros reference design "PB44"
git-svn-id: svn://svn.berlios.de/openocd/trunk@2662
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
duane [Wed, 2 Sep 2009 00:17:39 +0000 (00:17 +0000)]
Crusty Code fixes from the tcl directory re-arragements
git-svn-id: svn://svn.berlios.de/openocd/trunk@2661
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Tue, 1 Sep 2009 10:08:41 +0000 (10:08 +0000)]
- fixes the incorrect info msg displayed during stellaris flash programming.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2660
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Tue, 1 Sep 2009 10:08:00 +0000 (10:08 +0000)]
- fix a regression when using cortex_m3 emulated dcc channel
git-svn-id: svn://svn.berlios.de/openocd/trunk@2659
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
duane [Mon, 31 Aug 2009 12:21:12 +0000 (12:21 +0000)]
Warning fix
git-svn-id: svn://svn.berlios.de/openocd/trunk@2658
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 31 Aug 2009 09:06:01 +0000 (09:06 +0000)]
Gary Carlson <gcarlson@carlson-minot.com> config file
git-svn-id: svn://svn.berlios.de/openocd/trunk@2657
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 31 Aug 2009 06:02:01 +0000 (06:02 +0000)]
Ferdinand Postema <ferdinand@postema.eu> config script for the MMnet1001 module from Propox.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2656
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 30 Aug 2009 21:12:50 +0000 (21:12 +0000)]
David Brownell <david-b@pacbell.net> Minor code bugfix: check right variable.
Via code review by Steve Grubb <sgrubb@redhat.com>
Almost innocuous; this is value is checked later, this
check being wrong would make it check stack garbage.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2655
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 30 Aug 2009 20:08:07 +0000 (20:08 +0000)]
Dirk Behme <dirk.behme@googlemail.com> Fix typo in help text. It has to be 'production_test' instead of 'production' here.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2654
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 30 Aug 2009 20:05:40 +0000 (20:05 +0000)]
David Brownell <david-b@pacbell.net> Fix Sandstorm revision checking: right bits, right value!
git-svn-id: svn://svn.berlios.de/openocd/trunk@2653
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 30 Aug 2009 20:04:17 +0000 (20:04 +0000)]
David Brownell <david-b@pacbell.net> Remove duplicate check for flash write status.
Via code review by Steve Grubb <sgrubb@redhat.com>
Also minor fixes for the message from "fill": the byte
count is unsigned, not signed; and more importantly,
print the real number of bytes written
git-svn-id: svn://svn.berlios.de/openocd/trunk@2652
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 30 Aug 2009 17:32:56 +0000 (17:32 +0000)]
David Brownell <david-b@pacbell.net> Minor doc updates:
- Itemize the list of private customization examples
for openocd.cfg
- Add "override defaults" as a customization, specifically
for the work area (back it up or relocate it)
- Highlight some work area location issues
git-svn-id: svn://svn.berlios.de/openocd/trunk@2651
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 30 Aug 2009 17:30:14 +0000 (17:30 +0000)]
David Brownell <david-b@pacbell.net> start phasing out integers as target IDs
git-svn-id: svn://svn.berlios.de/openocd/trunk@2650
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 30 Aug 2009 17:27:50 +0000 (17:27 +0000)]
David Brownell <david-b@pacbell.net> Be sure the built-in search paths always go *after* ones provided
on the command line ... matching comment in add_default_dirs().
Without this it's impossible to use a private config file which
happens to have the same name as an installed one. Say, because
you're bugfixing a private copy...
git-svn-id: svn://svn.berlios.de/openocd/trunk@2649
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 28 Aug 2009 17:18:36 +0000 (17:18 +0000)]
David Brownell <david-b@pacbell.net> fix warnings
git-svn-id: svn://svn.berlios.de/openocd/trunk@2648
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 28 Aug 2009 13:43:26 +0000 (13:43 +0000)]
added arm11 timeout error messages
git-svn-id: svn://svn.berlios.de/openocd/trunk@2647
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 28 Aug 2009 09:47:19 +0000 (09:47 +0000)]
restore ICE watchpoint registers when the *last* software breakpoint is removed
git-svn-id: svn://svn.berlios.de/openocd/trunk@2646
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 28 Aug 2009 06:53:35 +0000 (06:53 +0000)]
David Brownell <david-b@pacbell.net> The Stellaris eval boards don't have TRST signals, so
defining ntrst_delay is pointless; don't.
At least the LM3S3748 eval board doesn't need nsrst_delay
either; remove that too.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2645
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Fri, 28 Aug 2009 06:52:08 +0000 (06:52 +0000)]
David Brownell <david-b@pacbell.net> ARM disassembly support for about five dozen non-Thumb instructions
that were added after ARMv5TE was defined:
- ARMv5J "BXJ" (for Java/Jazelle)
- ARMv6 "media" instructions (for OMAP2420, i.MX31, etc)
Compile-tested. This might not set up the simulator right for the
ARMv6 single step support; only BXJ branches though, and docs to
support Jazelle branching are non-public (still, sigh).
ARMv6 instructions known to be mis-handled by this disassembler
include: UMAAL, LDREX, STREX, CPS, SETEND, RFE, SRS, MCRR2, MRRC2
git-svn-id: svn://svn.berlios.de/openocd/trunk@2644
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 27 Aug 2009 10:37:01 +0000 (10:37 +0000)]
arm11 hardware step using simulation + breakpoint. Use "hardware_step enable" command to revert to hardware stepping. Ideally we could retire the "hardware_step enable" command once we no longer believe it to be necessary.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2643
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 27 Aug 2009 07:37:07 +0000 (07:37 +0000)]
arm11 single stepping wip - at least we know the next PC now
git-svn-id: svn://svn.berlios.de/openocd/trunk@2642
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 27 Aug 2009 07:35:47 +0000 (07:35 +0000)]
arm11 single stepping wip
git-svn-id: svn://svn.berlios.de/openocd/trunk@2641
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 27 Aug 2009 06:50:36 +0000 (06:50 +0000)]
refactor arm simulator to allow arm11 code to use it as well - no observable changes otherwise.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2640
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 26 Aug 2009 19:27:33 +0000 (19:27 +0000)]
some arm11 stuff that isn't done yet.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2639
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 26 Aug 2009 19:25:44 +0000 (19:25 +0000)]
Matt Hsu <matt@0xlab.org> and Holger Hans Peter Freyther <zecke@selfish.org> cortex-a8: Wait for the CPU to be halted/started
With DCCR we are asking the CPU to halt, we should wait until
the CPU has halted before proceeding with the operation.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2638
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 26 Aug 2009 19:24:45 +0000 (19:24 +0000)]
Matt Hsu <matt@0xlab.org> and Holger Hans Peter Freyther <zecke@selfish.org> Print the value that the method didn't like
git-svn-id: svn://svn.berlios.de/openocd/trunk@2637
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 26 Aug 2009 19:23:35 +0000 (19:23 +0000)]
Matt Hsu <matt@0xlab.org> and Holger Hans Peter Freyther <zecke@selfish.org> Only dap_ap_select when we are going to do a memory access
in the fast reg case.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2636
b42882b7 -edfa-0310-969c-
e2dbd0fdcd60
projects / openocd / log