]> git.sur5r.net Git - u-boot/log
u-boot
14 years agoppc4xx/POST: Add board specific UART POST test to lwmon5
Stefan Roese [Thu, 7 Oct 2010 12:16:25 +0000 (14:16 +0200)]
ppc4xx/POST: Add board specific UART POST test to lwmon5

Add CONFIG_POST_UART to implement a board specific UART POST test.
This is done since lwmon5 needs to set POST_ALWAYS to run this
test on each reboot. And we don't want to change the default
behavious of this this.

Signed-off-by: Stefan Roese <sr@denx.de>
14 years agoppc4xx: Change tsr/tcr macros to upper case
Stefan Roese [Mon, 4 Oct 2010 09:09:40 +0000 (11:09 +0200)]
ppc4xx: Change tsr/tcr macros to upper case

Remove uneccessary functions to access the TCR/TSR registers as well.

Signed-off-by: Stefan Roese <sr@denx.de>
14 years agoFAT: buffer overflow with FAT12/16
Stefano Babic [Wed, 20 Oct 2010 06:51:45 +0000 (08:51 +0200)]
FAT: buffer overflow with FAT12/16

Last commit 3831530dcb7b71329c272ccd6181f8038b6a6dd0a was intended
"explicitly specify FAT12/16 root directory parsing buffer size, instead
of relying on cluster size". Howver, the underlying function requires
the size of the buffer in blocks, not in bytes, and instead of passing
a double sector size a request for 1024 blocks is sent. This generates
a buffer overflow with overwriting of other structure (in the case seen,
USB structures were overwritten).

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Mikhail Zolotaryov <lebon@lebon.org.ua>
14 years agocommon/fdt_support.c: Fix compile warnings
Wolfgang Denk [Wed, 20 Oct 2010 06:59:16 +0000 (08:59 +0200)]
common/fdt_support.c: Fix compile warnings

Commit a6bd9e8 "FDT: Add fixup support for multiple banks of memory"
removed code but forgot to remove the variables used by it, resulting
in warnings:

fdt_support.c: In function 'fdt_fixup_memory_banks':
fdt_support.c:399: warning: unused variable 'sizecell'
fdt_support.c:399: warning: unused variable 'addrcell'

Remove the declarations, too.

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoUSB: sync Queue Element Transfer Descriptor against EHCI spec
Wolfgang Denk [Tue, 19 Oct 2010 14:13:15 +0000 (16:13 +0200)]
USB: sync Queue Element Transfer Descriptor against EHCI spec

Appendix B "EHCI 64-Bit Data Structures" of the "Enhanced Host
Controller Interface Specification for Universal Serial Bus" (Rev.
1.0, March 12, 2002) defines additional fields which were missing in
U-Boot's struct qTD; as these are also present in recent versions of
struct ehci_qtd in the Linux kernel, we add them here, too.

This fixes some nasty memory corruption problems.

Reported-by: Dan Lykowski <lykowdk@gmail.com>
See http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/76942

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Dan Lykowski <lykowdk@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
14 years agoMX31: Removed warnings for iomux function
Stefano Babic [Tue, 19 Oct 2010 18:19:13 +0000 (20:19 +0200)]
MX31: Removed warnings for iomux function

Removed warnings generated in the mx31_set_pad() function.

Signed-off-by: Stefano Babic <sbabic@denx.de>
14 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Tue, 19 Oct 2010 22:10:07 +0000 (00:10 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

14 years agoMakefile: rename TEXT_BASE to CONFIG_SYS_TEXT_BASE
Eric Cooper [Tue, 19 Oct 2010 17:31:11 +0000 (13:31 -0400)]
Makefile: rename TEXT_BASE to CONFIG_SYS_TEXT_BASE

14 years agoboard_init_r: Removed unused cmdtp variable
Richard Retanubun [Tue, 19 Oct 2010 14:29:55 +0000 (10:29 -0400)]
board_init_r: Removed unused cmdtp variable

Follow up to commit 620f1f6a64095ed558e68d37f1965d015cd49b02
removed compiler warning for (now) unused cmd_tbl_t* cmdtp

14 years agoAdd UBI README
Stefan Roese [Tue, 19 Oct 2010 12:58:02 +0000 (14:58 +0200)]
Add UBI README

This patch adds a small README to describe the usage of the
U-Boot UBI commands.

Signed-off-by: Stefan Roese <sr@denx.de>
14 years agocmd_fpga: cleanup help and check parameters
Stefano Babic [Tue, 19 Oct 2010 07:22:52 +0000 (09:22 +0200)]
cmd_fpga: cleanup help and check parameters

The usage and help for the fpga command is wrong and incomplete,
and the parameters are not checked before to be passed to the
underlying subfunction.

Signed-off-by: Stefano Babic <sbabic@denx.de>
14 years agoFPGA: Add missing prototype
Stefano Babic [Tue, 19 Oct 2010 07:22:23 +0000 (09:22 +0200)]
FPGA: Add missing prototype

Add prototype function for ispVMFreeMem to remove warnings
when support for Lattice FPGA is compiled.

Signed-off-by: Stefano Babic <sbabic@denx.de>
14 years agoboards.cfg: update local documentation
Mike Frysinger [Tue, 19 Oct 2010 06:49:40 +0000 (02:49 -0400)]
boards.cfg: update local documentation

The "options" field at the moment is only documented in the changelog
which isn't terribly useful to people without git.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14 years agoupdate board EB+CPUx9K2
Jens Scharsig [Tue, 19 Oct 2010 17:37:15 +0000 (19:37 +0200)]
update board EB+CPUx9K2

* update to support arm reloaction
* unnecessary environment variables removed

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
14 years agoAdd support for HP Jornada flashrom boards
Kristoffer Ericson [Fri, 15 Oct 2010 21:31:43 +0000 (23:31 +0200)]
Add support for HP Jornada flashrom boards

This patch adds support for the HP Jornada flashboards
that were made in 2008. Older flashroms should work if
memory registers are adjusted.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Adpted for TEXT_BASE -> CONFIG_SYS_TEXT_BASE rename.
Removed now redundant board/jornada/config.mk file.
Removed unused empty jornada_init() function to silence
"jornada.c:35: warning: 'jornada_init' defined but not used"

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoMakefile: allow boards to check file size limits
Mike Frysinger [Thu, 14 Oct 2010 02:58:23 +0000 (22:58 -0400)]
Makefile: allow boards to check file size limits

Boards often have a reserved size limit on the flash where they're stored.
Sometimes during upgrades or config changes, those limits are exceeded,
but no one notices until they try to upgrade and the limit screws things
up.  Either not enough of U-Boot is written to flash (and so the reboot
fails), or too much is written (and so things after it get clobbered).

So allow boards to declare a size limit (in bytes) and have the build
system check it while building.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14 years agodrivers/net/fec_mxc.c: write mac address in init
John Rigby [Wed, 13 Oct 2010 20:31:08 +0000 (14:31 -0600)]
drivers/net/fec_mxc.c: write mac address in init

Call fec_set_hwaddr in init routine to setup MAC address so when ethaddr is set
late via setenv the change will propagate to the hw.

Signed-off-by: John Rigby <john.rigby@linaro.org>
CC: Ben Warren <biggerbadderben@gmail.com>
14 years agoBuild: PXA: Fix TrizepsIV build variants
Marek Vasut [Sun, 3 Oct 2010 22:21:51 +0000 (00:21 +0200)]
Build: PXA: Fix TrizepsIV build variants

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoBuild: PXA: Fix Vpac270 build variants
Marek Vasut [Sun, 3 Oct 2010 16:27:36 +0000 (18:27 +0200)]
Build: PXA: Fix Vpac270 build variants

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: Fix vpac270 OneNAND booter
Marek Vasut [Sat, 16 Oct 2010 19:32:11 +0000 (21:32 +0200)]
PXA: Fix vpac270 OneNAND booter

NOTE: The modification in Makefile will be superseded by a pending patch!

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: Fix Balloon3 for Reloc
Marek Vasut [Sat, 2 Oct 2010 23:05:55 +0000 (01:05 +0200)]
PXA: Fix Balloon3 for Reloc

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: Fix ZipitZ2 for Reloc
Marek Vasut [Thu, 30 Sep 2010 10:22:38 +0000 (12:22 +0200)]
PXA: Fix ZipitZ2 for Reloc

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: Fix vpac270 for Reloc
Marek Vasut [Tue, 28 Sep 2010 13:50:49 +0000 (15:50 +0200)]
PXA: Fix vpac270 for Reloc

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: Fix reloc, Push lowlevel init into C code
Marek Vasut [Tue, 28 Sep 2010 13:44:10 +0000 (15:44 +0200)]
PXA: Fix reloc, Push lowlevel init into C code

Firstly, this fixes relocation issues. I had to use part of Dcache as RAM for a
while. I also moved around the lowlevel init code. It turned out so most of the
lowlevel init code ended in cpu.c (and eventually was rewritten into C).

This will also allow easier operation with FDT, multi-CPU-model support etc. in
later releases.

NOTE: This breaks most of the PXA boards (actually, the reloc stuff did already,
this only finishes the doom).

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: Add necessary information for RELOC
Marek Vasut [Thu, 23 Sep 2010 07:46:57 +0000 (09:46 +0200)]
PXA: Add necessary information for RELOC

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: fix MDREFR[APD] bit setting
Mikhail Kshevetskiy [Thu, 26 Aug 2010 19:24:22 +0000 (23:24 +0400)]
PXA: fix MDREFR[APD] bit setting

pxa_mem_setup macro use r6 to store CONFIG_SYS_MDREFR_VAL during memory
initialization. This reg is modified during execution of pxa_wait_ticks.
Later we use r6 to setup MDREFR[APD] bit. As result MDREFR[APD] is always
zero.

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com>
14 years agoPXA: fix environment sector size, kernel and environment location for vpac270
Mikhail Kshevetskiy [Thu, 26 Aug 2010 19:24:19 +0000 (23:24 +0400)]
PXA: fix environment sector size, kernel and environment location for vpac270

Define ENV_ADDR as MONITOR_BASE + MONITOR_LEN. Fix environment sector
size (NOR: 32Kb for first four sectors and 128Kb for other; OneNAND: 128Kb).

Last but not least: we have MONITOR_LEN = 0x40000 and one sector for
environment (size = 0x20000), so the kernel may start from 0x00060000 only.

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com>
14 years agoPXA: cleanup vpac270 config and set CONFIG_SYS_HZ to 1000
Mikhail Kshevetskiy [Thu, 26 Aug 2010 19:24:18 +0000 (23:24 +0400)]
PXA: cleanup vpac270 config and set CONFIG_SYS_HZ to 1000

* CONFIG_SYS_CLKS_IN_HZ is not used anywhere, so removing it
* CONFIG_SYS_HZ is set to 1000 on most architectures, so it
  seems to be the safe default

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com>
14 years agoPXA: remove unused u-boot.lds from board/vpac270
Mikhail Kshevetskiy [Thu, 26 Aug 2010 10:47:56 +0000 (14:47 +0400)]
PXA: remove unused u-boot.lds from board/vpac270

This file is not used, automatically generated u-boot.lds is used instead

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com>
14 years agoPXA: Add missing MAINTAINERS entries
Marek Vasut [Sat, 14 Aug 2010 04:02:11 +0000 (06:02 +0200)]
PXA: Add missing MAINTAINERS entries

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: Balloon3 board support
Marek Vasut [Mon, 26 Jul 2010 04:30:25 +0000 (06:30 +0200)]
PXA: Balloon3 board support

The following hardware is currently supported:
- UART
- USB Host
- FPGA

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: Voipac270 improvements
Marek Vasut [Thu, 22 Jul 2010 14:51:52 +0000 (16:51 +0200)]
PXA: Voipac270 improvements

128MB NOR module support.
Define __io to get harddrive working.
Fix saving of environment into OneNAND.
Boot from harddrive when possible.
Add missing MAINTAINERS entry.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: Add initial Palm LifeDrive support
Marek Vasut [Mon, 19 Jul 2010 09:23:07 +0000 (11:23 +0200)]
PXA: Add initial Palm LifeDrive support

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: Palm Tungsten|C Support
Marek Vasut [Sun, 18 Jul 2010 03:23:19 +0000 (05:23 +0200)]
PXA: Palm Tungsten|C Support

This patch adds support for the Palm Tungsten|C PXA255 board. The support
includes:
- LCD
- MMC
- UART
- NOR

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agocommon: Enable serial for PXA250
Marek Vasut [Sun, 18 Jul 2010 02:49:18 +0000 (04:49 +0200)]
common: Enable serial for PXA250

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: pxafb: Marvell Littleton LCD definition
Marek Vasut [Thu, 31 Dec 2009 02:44:22 +0000 (03:44 +0100)]
PXA: pxafb: Marvell Littleton LCD definition

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: pxafb: Add support for Sharp LQ038J7DH53
Marek Vasut [Mon, 19 Jul 2010 09:21:38 +0000 (11:21 +0200)]
PXA: pxafb: Add support for Sharp LQ038J7DH53

This LCD panel is found in Palm LifeDrive handheld

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: pxafb: Add ACX517AKN support
Marek Vasut [Sun, 18 Jul 2010 02:46:55 +0000 (04:46 +0200)]
PXA: pxafb: Add ACX517AKN support

ACX517AKN LCD panel is found in Palm Tungsten|C

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: pxa-regs.h cleanup
Marek Vasut [Thu, 9 Sep 2010 07:50:39 +0000 (09:50 +0200)]
PXA: pxa-regs.h cleanup

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoPXA: pxafb: Fix indent problems
Marek Vasut [Thu, 23 Sep 2010 06:32:54 +0000 (08:32 +0200)]
PXA: pxafb: Fix indent problems

Also change the initializer style

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
14 years agoExpand POST memory test to support arch-depended implementation.
York Sun [Tue, 28 Sep 2010 22:20:31 +0000 (15:20 -0700)]
Expand POST memory test to support arch-depended implementation.

Add weak functions to enable architecture depended preparation, address
advancing, cleaning up and error handling.

These weak functions provides the framwork to implemente arch/platform
dependent code for initializing/maintenance/restore the start address, size,
physical address as well as memory mapping before/between/after memory test.
arch_memory_failure_handle can also be implemented in case more care is needed
for arch/platform.

Signed-off-by: York Sun <yorksun@freescale.com>
14 years agoMerge branch 'at91' of git://git.denx.de/u-boot-atmel
Wolfgang Denk [Tue, 19 Oct 2010 20:10:47 +0000 (22:10 +0200)]
Merge branch 'at91' of git://git.denx.de/u-boot-atmel

14 years agodoc/README.scrapyard: add documentation for abandoned boards
Wolfgang Denk [Tue, 19 Oct 2010 19:46:25 +0000 (21:46 +0200)]
doc/README.scrapyard: add documentation for abandoned boards

Add a document to maintain a list of boards removed from the current
source tree, so archeologists can check more easily if here is
something they might want to dig for...

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoMerge branch 'elf_reloc'
Wolfgang Denk [Tue, 19 Oct 2010 19:07:52 +0000 (21:07 +0200)]
Merge branch 'elf_reloc'

Conflicts:
arch/arm/include/asm/config.h
board/LaCie/edminiv2/config.mk
board/karo/tx25/config.mk
board/logicpd/imx27lite/config.mk
doc/README.arm-relocation

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoMerge branch 'master' of git://git.denx.de/u-boot-imx
Wolfgang Denk [Tue, 19 Oct 2010 18:58:16 +0000 (20:58 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-imx

Conflicts:
board/logicpd/imx31_litekit/config.mk
boards.cfg

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoAT91 clock/timer: move static data to global_data struct
Reinhard Meyer [Tue, 5 Oct 2010 14:54:35 +0000 (16:54 +0200)]
AT91 clock/timer: move static data to global_data struct

clock.c / timer.c used static data and are called before relocation.
Move all static variables into global_data structure. Also cleanup
timer.c from unused stubs and make it truly use 64 bit tick values.

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
14 years agoat91rm9200ek: enbable USB support
Andreas Bießmann [Mon, 18 Oct 2010 20:58:31 +0000 (22:58 +0200)]
at91rm9200ek: enbable USB support

This patch enables USB for at91rm9200ek board.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
14 years agoat91rm9200: enable USB support
Andreas Bießmann [Mon, 18 Oct 2010 20:58:30 +0000 (22:58 +0200)]
at91rm9200: enable USB support

This patch fixes arch-at91/hardware.h to have the relevant defines for
at91rm9200 devices to support existing at91 usb driver.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
14 years agoat91rm9200ek: convert to at91
Andreas Bießmann [Mon, 18 Oct 2010 20:58:29 +0000 (22:58 +0200)]
at91rm9200ek: convert to at91

This patch removes some functionality from at91rm9200ek board but the
remaining functionality does now work with newer at91 code and
arm-relocation.

Currently missing features are:
 - dataflash booting (due to missing HW for testing)
 - MMC/SD-Card
 - first stage bootloader support is completely removed (not needed for
   NOR)

Cause this board was (some days ago) reference for all at91rm9200 based
boards this should be a good starting point to convert all remaining
at91rm9200 borads to at91 code. Aside from that this is a good base to
get some drivers between at91sam/at91rm/avr32 merged.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
14 years agoNC650/CP850: remove code for yet another corpse
Wolfgang Denk [Tue, 19 Oct 2010 09:27:05 +0000 (11:27 +0200)]
NC650/CP850: remove code for yet another corpse

The NC650 / CP850 boards have long been unmaintained and left broken.
As obviously nobody is interested in that code any more, we may as
well remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoQONG: fix and update board config file
Wolfgang Denk [Tue, 19 Oct 2010 09:10:06 +0000 (11:10 +0200)]
QONG: fix and update board config file

Fix flash memory map and other updates for QONG board:

- adjust/fix "kernel_addr" settings
- adjust/fix mtdparts NOR flash settings
- add mtdparts NAND flash mapping
- sort command list
- enable "setexpr" command
- enable ext2 support
- delete bogus comment

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
14 years agoi.MX31: Fix Litekit board to use new ARM relocation support.
Magnus Lilja [Sat, 16 Oct 2010 17:47:06 +0000 (19:47 +0200)]
i.MX31: Fix Litekit board to use new ARM relocation support.

Tested on hardware. Boots Linux nicely.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
14 years agoMX5: Remove dead code with ENABLE_IMPRECISE_ABORT
Jason Liu [Tue, 19 Oct 2010 08:22:14 +0000 (16:22 +0800)]
MX5: Remove dead code with ENABLE_IMPRECISE_ABORT

This code section is dead due to we never define
ENABLE_IMPRECISE_ABORT for MX5

Signed-off-by: Jason Liu <r64343@freescale.com>
14 years agoRename TEXT_BASE: fix merge conflicts
Wolfgang Denk [Mon, 18 Oct 2010 21:43:37 +0000 (23:43 +0200)]
Rename TEXT_BASE: fix merge conflicts

Commit 14d0a02a "Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE" missed a
few places, especially for boards that were added inbetween. Fix the
remaining issues.

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoARM: enable device tree for beagle
John Rigby [Wed, 13 Oct 2010 19:57:37 +0000 (13:57 -0600)]
ARM: enable device tree for beagle

For testing ARM device tree support

Signed-off-by: John Rigby <john.rigby@linaro.org>
Acked-by: Wolfgang Denk <wd@denx.de>
14 years agoARM: add flat device tree support
John Rigby [Wed, 13 Oct 2010 19:57:36 +0000 (13:57 -0600)]
ARM: add flat device tree support

Based on other architectures already supported.
Tested on OMAP3 Beagle board and another unnamed ARM platform.

Signed-off-by: John Rigby <john.rigby@linaro.org>
Tested-by: Rob Herring <rob.herring@smooth-stone.com>
Acked-by: Wolfgang Denk <wd@denx.de>
14 years agoboot: change some arch ifdefs to feature ifdefs
John Rigby [Wed, 13 Oct 2010 19:57:35 +0000 (13:57 -0600)]
boot: change some arch ifdefs to feature ifdefs

The routines boot_ramdisk_high, boot_get_cmdline and boot_get_kbd
are currently enabled by various combinations of CONFIG_M68K,
CONFIG_POWERPC and CONFIG_SPARC.

Use CONFIG_SYS_BOOT_<FEATURE> defines instead.

CONFIG_SYS_BOOT_RAMDISK_HIGH
CONFIG_SYS_BOOT_GET_CMDLINE
CONFIG_SYS_BOOT_GET_KBD

Define these as appropriate in arch/include/asm/config.h files.

Signed-off-by: John Rigby <john.rigby@linaro.org>
Acked-by: Wolfgang Denk <wd@denx.de>
14 years agoFDT: only call boot_get_fdt from generic code
John Rigby [Wed, 13 Oct 2010 19:57:34 +0000 (13:57 -0600)]
FDT: only call boot_get_fdt from generic code

All arches except nios2 and microblaze call boot_get_fdt
from bootm_start in common/cmd_bootm.c.

Having nios2 and microblaze do so as well removes code from
their respective do_bootm_linux routines and allows removal of
a nasty ifdef from bootm_start.

In the case where boot_get_fdt returns an error bootm_start
returns and the platform specific do_bootm_linux routines
will never get called.

Also only check argv[3] for an fdt addr if argc > 3 first.
This is already the case for nios2.

Signed-off-by: John Rigby <john.rigby@linaro.org>
CC: Scott McNutt <smcnutt@psyent.com>
CC: Michal Simek <monstr@monstr.eu>
CC: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Michal Simek <monstr@monstr.eu>
Tested-by: Thomas Chou <thomas@wytron.com.tw>
14 years agoFDT: Add fixup support for multiple banks of memory
John Rigby [Wed, 13 Oct 2010 19:57:33 +0000 (13:57 -0600)]
FDT: Add fixup support for multiple banks of memory

Add fdt_fixup_memory_banks and reimplement fdt_fixup_memory
using it.  Tested on OMAP3 beagle board with two banks of
memory.

Signed-off-by: John Rigby <john.rigby@linaro.org>
CC: Jerry Van Baren <vanbaren@cideas.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
14 years agocommon/image.c remove extra calls to be32_to_cpu in boot_get_fdt
John Rigby [Wed, 13 Oct 2010 19:57:32 +0000 (13:57 -0600)]
common/image.c remove extra calls to be32_to_cpu in boot_get_fdt

fdt_totalsize returns size in cpu endian so don't call be32_to_cpu
on the result.  This was harmless on big endian platforms but not
on little endian ARMs.

Signed-off-by: John Rigby <john.rigby@linaro.org>
14 years agocommon/image.c fix length calculation in boot_relocate_fdt
John Rigby [Wed, 13 Oct 2010 19:57:31 +0000 (13:57 -0600)]
common/image.c fix length calculation in boot_relocate_fdt

boot_relocate_fdt is called on platforms with CONFIG_SYS_BOOTMAPSZ
defined to relocate the device tree blob to be inside the
boot map area between bootmap_base and bootmap_base+CONFIG_SYS_BOOTMAPSZ.

For the case where the blob needs to be relocated, space is
allocated inside the bootmap by calling lmb_alloc_base with
size passed in plus some padding:

    of_len = *of_size + CONFIG_SYS_FDT_PAD;

For the case where the blob is already inside the bounds of the boot map
area, lmb_reserve is called to reserve the the space where the blob is
already residing.  The calculation for this case is currently:

    of_len = (CONFIG_SYS_BOOTMAPSZ + bootmap_base) - (ulong)fdt_blob;

This is wrong because it reserves all the space in the boot map area
from the blob to the end ignoring completely the actual size. The
worst case is where the blob is at the beginning and the entire boot map
area get reserved. Fix this by changing the length calculation to this:

    of_len = *of_size + CONFIG_SYS_FDT_PAD;

This bug has likely never manifested itself because bootm has never
been called with the fdt blob already in the bootmap area.  In my
testing on an OMAP3 beagle board I initially worked around the bug
by simply moving the initial location of the fdt blob.  I have tested
with the new calculation with the fdt blob both inside and outside
the boot map area.

Signed-off-by: John Rigby <john.rigby@linaro.org>
14 years agodlmalloc.c: Fix gcc alias warning
Joakim Tjernlund [Thu, 14 Oct 2010 06:51:34 +0000 (08:51 +0200)]
dlmalloc.c: Fix gcc alias warning

Fix these warnings:
dlmalloc.c: In function 'free':
dlmalloc.c:2507: warning: dereferencing pointer '({anonymous})' does break strict-aliasing rules
dlmalloc.c:2507: warning: dereferencing pointer '({anonymous})' does break strict-aliasing rules
dlmalloc.c:2507: warning: dereferencing pointer '({anonymous})' does break strict-aliasing rules

Some page(http://blog.worldofcoding.com/2010/02/solving-gcc-44-strict-aliasing-problems.html)
suggests adding __attribute__((__may_alias__)). Doing so makes the warnings go away.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Acked-by: Mike Frysinger <vapier@gentoo.org>
14 years agopowerpc: do not fixup NULL ptrs
Joakim Tjernlund [Thu, 14 Oct 2010 09:51:44 +0000 (11:51 +0200)]
powerpc: do not fixup NULL ptrs

The fixup routine must not fixup NULL pointers.
Problem can be seen by
 char *testfun(void) __attribute__((weak));
 char *(*myfun)(void) = testfun;

Then add
  printf("myfun:%p, &myfun:%p\n", myfun, &myfun);
before relocation and after relocation.
myfun should be NULL in both cases but it is not.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
14 years agopowerpc: Cleanup BOOTFLAG_* references
Peter Tyser [Fri, 15 Oct 2010 04:33:24 +0000 (23:33 -0500)]
powerpc: Cleanup BOOTFLAG_* references

Now that warm booting is not supported, there isn't a need for the
BOOTFLAG_COLD and BOOTFLAG_WARM defines, so remove them.

Note that this change makes the board info bd_bootflags field useless.
It will always be set to 0, but we leave it around so that we don't
break the board info structure that some OSes are expecting to be passed
from U-Boot.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
14 years agoMPC5121: Add USB EHCI support
Damien Dusha [Thu, 14 Oct 2010 13:27:06 +0000 (15:27 +0200)]
MPC5121: Add USB EHCI support

Signed-off-by: Francesco Rendine <francesco.rendine@valueteam.com>
Signed-off-by: Damien Dusha <d.dusha@gmail.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Coding style cleanup; slight file restructuring.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Remy Bohmer <linux@bohmer.net>
14 years agoMerge branch 'master' of /home/wd/git/u-boot/master/
Wolfgang Denk [Mon, 18 Oct 2010 20:29:40 +0000 (22:29 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/master/

14 years agoMAINTAINERS: Fix alphabetical order in ARM subsection
Enric Balletbo i Serra [Mon, 18 Oct 2010 17:38:34 +0000 (19:38 +0200)]
MAINTAINERS: Fix alphabetical order in ARM subsection

I'm noticed that IGEP maintainer isn't in the correct place within
the ARM subsection: it's supposed to be in alphabetical order by
maintainer. This patch fix this.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
14 years agoMerge branch 'master' of git://git.denx.de/u-boot-nand-flash
Wolfgang Denk [Mon, 18 Oct 2010 20:23:36 +0000 (22:23 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

14 years agoconfig.mk cleanup: drop "-I$(TOPDIR)/board" entries
Wolfgang Denk [Sun, 17 Oct 2010 15:31:59 +0000 (17:31 +0200)]
config.mk cleanup: drop "-I$(TOPDIR)/board" entries

After the recent cleanups, a number of config.mk files consist only of
a "PLATFORM_CPPFLAGS += -I$(TOPDIR)/board" entry whih is not needed.
Remove such entries.  In most cases, that means that the whole
config.mk file can be removed.

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoMAKEALL: allow additional board selections
Wolfgang Denk [Sun, 17 Oct 2010 10:26:48 +0000 (12:26 +0200)]
MAKEALL: allow additional board selections

Add command line handling to select boards to be built by
architecture, CPU family, vendor or SoC name.

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoMakefile: move all Power Architecture boards into boards.cfg
Wolfgang Denk [Wed, 6 Oct 2010 07:05:45 +0000 (09:05 +0200)]
Makefile: move all Power Architecture boards into boards.cfg

Clean up Makefile, and drop a lot of the config.mk files on the way.

We now also automatically pick all boards that are listed in
boards.cfg (and with all configurations), so we can drop the redundant
entries from MAKEALL to avoid building these twice.

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoautoconfig.mk: avoid apostophes around hex values
Wolfgang Denk [Sat, 16 Oct 2010 21:50:51 +0000 (23:50 +0200)]
autoconfig.mk: avoid apostophes around hex values

When generating include/autoconfig.mk, hex numbers would be quoted.
This caused some false positives during automatic testing of the
builds, and is known to cause some real issues for some Blackfin
configurations. Don't use apostophes for decimal and hex numbers (nor
for octal numbers).

Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14 years agoRename TEXT_BASE into CONFIG_SYS_TEXT_BASE
Wolfgang Denk [Thu, 7 Oct 2010 19:51:12 +0000 (21:51 +0200)]
Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE

The change is currently needed to be able to remove the board
configuration scripting from the top level Makefile and replace it by
a simple, table driven script.

Moving this configuration setting into the "CONFIG_*" name space is
also desirable because it is needed if we ever should move forward to
a Kconfig driven configuration system.

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agomkconfig: change CONFIG_MK_ prefix into plain CONFIG_
Wolfgang Denk [Mon, 4 Oct 2010 17:58:00 +0000 (19:58 +0200)]
mkconfig: change CONFIG_MK_ prefix into plain CONFIG_

When planning for more generalization and Makefile cleanup it became
obvious that the introduction of a separate CONFIG_MK_ name space for
config options that were set through scripting in the Makefile was
not a good idea.

Originally the idea was to provide a script-free approach to supply
configuration options - there was no real need for a separate name
space. But when we now convert the existing Makefile entries to make
use of this approach, it would mean that we have to touch a large
number of board config files and add #ifdef / #define sequences to
"convert" from the CONFIG_MK_ to the CONFIG_ name space.

It seems much cleaner to get rid of this somewhat arbitrary _MK
string now for the few boards that actually use it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
14 years agoBuild: Add "board options" column to boards.cfg
Marek Vasut [Sun, 3 Oct 2010 22:34:17 +0000 (00:34 +0200)]
Build: Add "board options" column to boards.cfg

There are some boards where it's currently not possible to detect all
board information at runtime, therefore a new column was added to
boards.cfg .

This column can contain multiple options: a board configuration name,
optionally followed by a colon (':') and a list of options, which are
separated by comma (',').

In case of simple options like '256M_U_BOOT', these expand to
"#define CONFIG_MK_256M_U_BOOT 1" in config.h . In case of
assignments like 'RAM=8192', these expand to "#define CONFIG_MK_RAM
8192" in config.h .

Example:

FOO:HAS_BAR,BAZ=64

means:
- the name of the board config file is include/configs/FOO.h
- the generated file include/config.h will contain these
  lines:

#define CONFIG_HAS_BAR  1
#define CONFIG_BAZ  64

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
[wd@denx.de: edited commit message; added code to deal with an
optional board configuration name]

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoMakefile: clean MatrixVision builds
Wolfgang Denk [Sat, 16 Oct 2010 16:24:16 +0000 (18:24 +0200)]
Makefile: clean MatrixVision builds

"make clean" after builds of MatrixVision boards would leave stale
files around:

board/matrix_vision/mvblm7/bootscript.img
board/matrix_vision/mvsmr/bootscript.img

Fix this.

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoFix warning in nand unlock command
Scott Wood [Wed, 13 Oct 2010 16:04:30 +0000 (11:04 -0500)]
Fix warning in nand unlock command

Commit ea533c260a801c4e51f92f75165cebe6d7b01e35 changed
arg_off_size to take a pointer to a device index, rather than
to the device itself.  When updating callers, the nand unlock
code was missed.

Signed-off-by: Scott Wood <scottwood@freescale.com>
14 years agompc83xx: fix 837x MDS PCI HOST build
Kim Phillips [Thu, 30 Sep 2010 18:40:34 +0000 (13:40 -0500)]
mpc83xx: fix 837x MDS PCI HOST build

commit 6aa3d3bfaa986f1aff5e21a9b9f68d087715b1a9
"83xx: Remove warmboot parameter from PCI init functions" missed
one mpc83xx_pcie_init callsite, causing this build error:

Configuring for MPC837XEMDS_HOST board...
pci.c: In function 'pci_init_board':
pci.c:141: error: too many arguments to function 'mpc83xx_pcie_init'

this patch extends the commit to include that callsite.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14 years agoMPC832XEMDS: fix pci.c build warning
Wolfgang Denk [Sat, 16 Oct 2010 16:07:07 +0000 (18:07 +0200)]
MPC832XEMDS: fix pci.c build warning

Doubled use of DECLARE_GLOBAL_DATA_PTR caused compile warning:

pci.c:71: warning: register used for two global register variables

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
14 years agologodl: remove code for yet another corpse
Wolfgang Denk [Tue, 5 Oct 2010 20:03:23 +0000 (22:03 +0200)]
logodl: remove code for yet another corpse

The logodl board has long been unmaintained and left broken.
As obviously nobody is interestedin that code any more, we may as well
remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: August Hoeraendl <august.hoerandl@gmx.at>
Cc: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
14 years agoschmoogie: fix build error due to removal of forceenv()
Wolfgang Denk [Tue, 5 Oct 2010 19:17:28 +0000 (21:17 +0200)]
schmoogie: fix build error due to removal of forceenv()

commit 6d014adf dropped support for the forceenv() function, but failed
to remove references to it from board/davinci/schmoogie/schmoogie.c

Replace forceenv() by setenv() and set CONFIG_ENV_OVERWRITE instead in
the board config file to allow overwriting the serial number.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Sergey Kubushyn <ksi@koi8.net>
Acked-by: Sergey Kubushyn <ksi@koi8.net>
14 years agoFPGA: fix support for non-Lattice devices
Wolfgang Denk [Mon, 18 Oct 2010 19:32:14 +0000 (21:32 +0200)]
FPGA: fix support for non-Lattice devices

Commit 3b8ac464 "FPGA: add support for downloading Lattice bitstream"
added support for Lattice devices, but failed to add #ifdef's that are
needed when building for non-Lattice devices, which results in build
failures like these:

Configuring for GEN860T board...
drivers/fpga/libfpga.a(fpga.o): In function `fpga_dev_info':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:145: undefined reference to `lattice_info'
drivers/fpga/libfpga.a(fpga.o): In function `fpga_dump':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:269: undefined reference to `lattice_dump'
drivers/fpga/libfpga.a(fpga.o): In function `fpga_load':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:233: undefined reference to `lattice_load'
make: *** [u-boot] Error 1

Add the missing code.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
14 years agoMX31: add delay between USB port setup and reset
Stefano Babic [Mon, 18 Oct 2010 08:23:05 +0000 (10:23 +0200)]
MX31: add delay between USB port setup and reset

Sometimes a usb tree is not popolated after a system reset.
It seems a delay is required after setting the USB ports
for the MX.31 before resetting the ehci controller.

Signed-off-by: Stefano Babic <sbabic@denx.de>
14 years agoMX5: rename mx51 to mx5
Jason Liu [Mon, 18 Oct 2010 03:09:26 +0000 (11:09 +0800)]
MX5: rename mx51 to mx5

Rename mx51 to mx5 in order to support more mx51
like-style SOCs such as MX53 and the followings.

Signed-off-by: Jason Liu <r64343@freescale.com>
14 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Sun, 17 Oct 2010 18:25:05 +0000 (20:25 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

14 years agoda850evm: fix linux bootparam address
Ben Gardiner [Thu, 14 Oct 2010 21:26:32 +0000 (17:26 -0400)]
da850evm: fix linux bootparam address

This patch fixes the LINUX_BOOT_PARAM_ADDR define to be based off of
PHYS_SDRAM_1 instead of CONFIG_SYS_MEMTEST_START. On da830 they are the same
thing but on da850 the CONFIG_SYS_MEMSTART define is offset from the
PHYS_SDRAM_1 start.

Without this patch it is not possible to boot linux on da850 -- bootm hangs
at "Uncompressing Linux... done, booting the kernel."

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
14 years agoda850evm: basic MII EMAC support
Ben Gardiner [Thu, 14 Oct 2010 21:26:29 +0000 (17:26 -0400)]
da850evm: basic MII EMAC support

The current da850evm support in u-boot/master omits any use of
the davinci EMAC. This patch adds basic support for the EMAC using
the MII PHY found on the baseboard of the EVM. The MAC address is
read from the environment variable 'ethadd'. Note that this is
different from the da850evm support in the u-boot omapl1 tree
where the MAC address is read from SPI flash.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Sandeep Paulraj <s-paulraj@ti.com>
CC: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
14 years agoda850evm: add mtdpart and ubi commands with NAND support
Ben Gardiner [Thu, 14 Oct 2010 21:26:27 +0000 (17:26 -0400)]
da850evm: add mtdpart and ubi commands with NAND support

This patch enables also the mtdpart, ubi and ubifs commands when NAND support
is enabled.

Signed-off-by: Ben Gardiner<bengardiner@nanometrics.ca>
To: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
14 years agoda850evm: setup NAND support under CONFIG_USE_NAND
Ben Gardiner [Thu, 14 Oct 2010 21:26:25 +0000 (17:26 -0400)]
da850evm: setup NAND support under CONFIG_USE_NAND

The current da850evm config is missing the pieces for NAND support that can be
found in Sandeep's u-boot-davinci tree [1].

This patch adds NAND support in the spirit of the support in the u-boot-davinci
tree where NAND support for the da850evm can be enabled by putting a single
'#define CONFIG_USE_NAND' at the top of the include/configs/da850evm.h file.

[1] http://arago-project.org/git/people/?p=sandeep/u-boot-davinci.git;a=tree

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
14 years agoda850evm: setup the NAND flash timings
Ben Gardiner [Thu, 14 Oct 2010 21:26:22 +0000 (17:26 -0400)]
da850evm: setup the NAND flash timings

The default NAND flash timings are very conservative. This patch assigns the
timings reccomended in the recent linux kernel patch [1] from Sekhar Nori. The
speedup, as reported in that patch, is 5.3x for reads.

[1] http://www.spinics.net/lists/arm-kernel/msg100278.html

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
14 years agoda850evm : enable NAND even when not in NAND boot mode
Ben Gardiner [Thu, 14 Oct 2010 21:26:19 +0000 (17:26 -0400)]
da850evm : enable NAND even when not in NAND boot mode

There is currently no NAND pinmux enabled by the da850evm board setup code.
This is fine when booting from NAND since the early boot code (UBL) will setup
the pinmux; however, when the boot mode is any other setting NAND is unusable
when enabled in the config.

This patch adds a pinmux list for NAND and enables it when NAND is enabled in
the config. Tested by booting from SPI on the da850evm and verifying NAND
was usable.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Nick Thompson <nick.thompson@ge.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
14 years agodavinci_nand, trivial : use symbolic ECC start command
Ben Gardiner [Thu, 14 Oct 2010 21:26:17 +0000 (17:26 -0400)]
davinci_nand, trivial : use symbolic ECC start command

The ECC calculations were started by writing 1 << 13 to the nand FCR register;
that value is also defined as DAVINCI_NANDFCR_4BIT_CALC_START in emif_defs.h.

This patch substitutes the macro DAVINCI_NANDFCR_4BIT_CALC_START for the
magic number '1 << 13'.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
14 years agoOMAP3: Add support for the OMAP3 IGEP module.
Enric Balletbo i Serra [Thu, 14 Oct 2010 20:57:39 +0000 (16:57 -0400)]
OMAP3: Add support for the OMAP3 IGEP module.

The IGEP module is a low-power, high performance production-ready
system-on-module (SOM) based on TI's OMAP3 family.The IGEP module
solution based upon TI OMAP3 provides a low-power/low-cost platform
for a variety of consumer/industrial/medical devices.

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
14 years agoOMAP3: Add support for the IGEP v2 board.
Enric Balletbo i Serra [Thu, 14 Oct 2010 20:54:59 +0000 (16:54 -0400)]
OMAP3: Add support for the IGEP v2 board.

The IGEP v2 board is a low-cost, fan-less and industrial temperature
range single board computer that unleashes laptop-like performance and
expandability without the bulk, expense, or noise of typical desktop
machines. Its architecture shares much in common with other OMAP3 boards.

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Acked-by: Steve Sakoman <steve.sakoman@linaro.org>
Tested-by: Steve Sakoman <steve.sakoman@linaro.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
14 years agoOMAP3: SDRC: Introduce Numonyx DDR type
Enric Balletbo i Serra [Thu, 14 Oct 2010 20:53:27 +0000 (16:53 -0400)]
OMAP3: SDRC: Introduce Numonyx DDR type

Introduce Numonyx DDR timings and provide CONFIG_OMAP3_NUMONYX_DDR
config options to allow for platform files to setup their timings.

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Acked-by: Steve Sakoman <steve.sakoman@linaro.org>
Tested-by: Steve Sakoman <steve.sakoman@linaro.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
14 years agoARMV7: OMAP4: Implement relocation for Panda and OMAP4430SDP
Steve Sakoman [Thu, 30 Sep 2010 03:59:51 +0000 (20:59 -0700)]
ARMV7: OMAP4: Implement relocation for Panda and OMAP4430SDP

This patch fixes the build breakage introduced by the recent relocation
changes for ARMV7

Signed-off-by: Steve Sakoman <steve@sakoman.com>
14 years agoARMV7: OMAP3: Fix bug in get_sdr_cs_offset()
Steve Sakoman [Fri, 1 Oct 2010 04:46:52 +0000 (21:46 -0700)]
ARMV7: OMAP3: Fix bug in get_sdr_cs_offset()

This patch fixes a typo in the routine to calculate the cs offset
based upon the contents of the SDRC cs_cfg register.  This function
mistakenly shifts the CS1STARTLOW field 17 bits right instead of
17 bits left.

This hasn't been an issue to date because all OMAP3 boards currently
are configured to have zeros in this field.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
14 years agoARMV7: OMAP3: Enable cache support on Overo
Steve Sakoman [Wed, 29 Sep 2010 20:58:34 +0000 (13:58 -0700)]
ARMV7: OMAP3: Enable cache support on Overo

Signed-off-by: Steve Sakoman <steve@sakoman.com>
14 years agoARMV7: OMAP3: Implement relocation for Overo
Steve Sakoman [Wed, 29 Sep 2010 20:54:19 +0000 (13:54 -0700)]
ARMV7: OMAP3: Implement relocation for Overo

This patch fixes the build breakage introduced by the recent relocation
changes for ARMV7

Signed-off-by: Steve Sakoman <steve@sakoman.com>
14 years agoARMV7: OMAP4: Enable saveenv to eMMC for SDP4430
Sukumar Ghorai [Tue, 14 Sep 2010 08:22:34 +0000 (13:52 +0530)]
ARMV7: OMAP4: Enable saveenv to eMMC for SDP4430

The SDP4430 does not have onboard NAND, it has eMMC on the second
MMC slot.  This patch adds support for saving the u-boot environment
to eMMC.

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Tested-by: Steve Sakoman <steve@sakoman.com>