]> git.sur5r.net Git - u-boot/log
u-boot
9 years agoARM: mx6: move to a standard arch/board approach
Boris BREZILLON [Wed, 4 Mar 2015 12:13:03 +0000 (13:13 +0100)]
ARM: mx6: move to a standard arch/board approach

Freescale boards are currently all defined in arch/arm/Kconfig, which
makes them hard to detect.
Moreover the MX6 SoC variant (Q, D, DL, S, SL) selection is currently
done via the SYS_EXTRA_OPTIONS option which marked as deprecated.

Move to a more standard way to select sub-architecture and board by
creating a Kconfig under arch/arm/cpu/armv7/mx6 and a new ARCH_MX6
option.

Existing MX6 board definitions should be moved in this new Kconfig in
choice menu, and new boards should be directly declared in this menu.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
9 years agoat91sam9rlek_mmc_defconfig: Add CONFIG_ARCH_AT91=y
Tom Rini [Fri, 20 Mar 2015 14:47:38 +0000 (10:47 -0400)]
at91sam9rlek_mmc_defconfig: Add CONFIG_ARCH_AT91=y

This flag was missing and thus the board was totally being configured
wrong.

Signed-off-by: Tom Rini <trini@konsulko.com>
9 years agoMerge branch 'master' of git://git.denx.de/u-boot-atmel
Tom Rini [Fri, 20 Mar 2015 11:01:00 +0000 (07:01 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-atmel

9 years agoARM: atmel: sama5d4: set non-secured for peripherals
Bo Shen [Wed, 4 Mar 2015 05:48:47 +0000 (13:48 +0800)]
ARM: atmel: sama5d4: set non-secured for peripherals

When access the programmable secure peripherals address space,
it needs set them to non-secured.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
9 years agoNet: macb: reset GBE bit when fallback checking
Bo Shen [Wed, 4 Mar 2015 05:35:16 +0000 (13:35 +0800)]
Net: macb: reset GBE bit when fallback checking

If the GBE bit is set, when do next time autonegotiation,
if the result is not 1000Mbps, it will fallback to 100Mbps
checking. So, we need to clear the GBE bit.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
9 years agoARM: atmel: armv7: move spl lds to armv7 directory
Bo Shen [Wed, 4 Mar 2015 05:32:57 +0000 (13:32 +0800)]
ARM: atmel: armv7: move spl lds to armv7 directory

As the u-boot-spl.lds is used only for armv7 SoCs (includes
sama5d3 and sama5d4), so move it to armv7 directory.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
9 years agoARM: atmel: sama5d4 boards: fix spl lds location
Bo Shen [Wed, 4 Mar 2015 05:32:56 +0000 (13:32 +0800)]
ARM: atmel: sama5d4 boards: fix spl lds location

As the u-boot-spl.lds is moved to <arch/arm/mach-at91> directory.
So, correct the path for sama5d4 related boards.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
9 years agoARM: atmel: sama5d4 xplained: enable mmc power
Bo Shen [Fri, 13 Feb 2015 07:53:18 +0000 (15:53 +0800)]
ARM: atmel: sama5d4 xplained: enable mmc power

Enable the power for MMC/SD port.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
9 years agoARM: at91: at91sam9rlek: add hush parser to defconfig
Wu, Josh [Tue, 3 Feb 2015 10:19:05 +0000 (18:19 +0800)]
ARM: at91: at91sam9rlek: add hush parser to defconfig

HUSH parser will handle the variable easier. That will be helpful for
write a complicated U-Boot commands or varaibles.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
9 years agoARM: at91: at91sam9rlek: add mmc environment configuration
Wu, Josh [Mon, 2 Feb 2015 09:51:01 +0000 (17:51 +0800)]
ARM: at91: at91sam9rlek: add mmc environment configuration

Add a mmc default config, which will save the environment in a FAT file
(uboot.env) of MMC.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
9 years agoARM: at91: at91sam9rlek: add mci support
Wu, Josh [Mon, 2 Feb 2015 09:51:00 +0000 (17:51 +0800)]
ARM: at91: at91sam9rlek: add mci support

This patch enable the MCI support for at91sam9rlek board.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
[rebase on ToT]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
9 years agoARM: at91: at91sam9rlek: update the default nand flash configs
Wu, Josh [Tue, 3 Feb 2015 03:38:30 +0000 (11:38 +0800)]
ARM: at91: at91sam9rlek: update the default nand flash configs

Update the nand flash offset mapping, default nand bootcmand and
bootargs to align with linux4sam.org.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
9 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-imx
Tom Rini [Wed, 18 Mar 2015 11:07:43 +0000 (07:07 -0400)]
Merge branch 'master' of git://www.denx.de/git/u-boot-imx

9 years agoMerge branch 'master' of git://git.denx.de/u-boot-i2c
Tom Rini [Wed, 18 Mar 2015 11:07:36 +0000 (07:07 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-i2c

9 years agoMerge branch 'master' of git://git.denx.de/u-boot-mmc
Tom Rini [Wed, 18 Mar 2015 11:07:20 +0000 (07:07 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-mmc

9 years agoi2c: mvtwsi: Fix problem with baud rate calculation
Stefan Roese [Wed, 18 Mar 2015 08:30:54 +0000 (09:30 +0100)]
i2c: mvtwsi: Fix problem with baud rate calculation

The current implementation for baudrate calculation is incorrect.
This part from the formula:

"2 ^ (n + 1)" is not equivalent to (1 << n) but to (2 << n)!

This patch fixes this and moves this calculation to a function instead of using a macro.
This new function is taken from the Linux kernel.

This was detected and tested on the Marvell Armada A38x DB-88F6820-GP eval board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
9 years agomv_i2c: fix warnings on 64-bit builds
Rob Herring [Tue, 17 Mar 2015 20:46:36 +0000 (15:46 -0500)]
mv_i2c: fix warnings on 64-bit builds

Change addresses to unsigned long to be compatible with 64-bit builds.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Heiko Schocher <hs@denx.de>
9 years agomv_sdhci: fix warnings on 64-bit builds
Rob Herring [Tue, 17 Mar 2015 20:46:39 +0000 (15:46 -0500)]
mv_sdhci: fix warnings on 64-bit builds

Change addresses to unsigned long to be compatible with 64-bit builds.
Regardless of fixing warnings, the device is still only 32-bit capable.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
9 years agosdhci: fix warnings on 64-bit builds
Rob Herring [Tue, 17 Mar 2015 20:46:38 +0000 (15:46 -0500)]
sdhci: fix warnings on 64-bit builds

Change addresses to unsigned long to be compatible with 64-bit builds.
Regardless of fixing warnings, the device is still only 32-bit capable.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
9 years agommc: sdhci: don't clobber adjacent registers
Matt Reimer [Mon, 23 Feb 2015 21:56:58 +0000 (14:56 -0700)]
mmc: sdhci: don't clobber adjacent registers

SDHCI_HOST_CONTROL is a byte-sized register, so don't write to it
as if it were a long, as that would result in clobbering the three
registers following.

Signed-off-by: Matt Reimer <mreimer@sdgsystems.com>
9 years agommc: s5p: properly mask SELBASECLK
Matt Reimer [Mon, 23 Feb 2015 21:52:22 +0000 (14:52 -0700)]
mmc: s5p: properly mask SELBASECLK

Properly mask SELBASECLK by using an actual mask rather than the
number of bits to shift in order to create the mask.

Signed-off-by: Matt Reimer <mreimer@sdgsystems.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
9 years agoPrepare v2015.04-rc4 v2015.04-rc4
Tom Rini [Tue, 17 Mar 2015 20:37:48 +0000 (16:37 -0400)]
Prepare v2015.04-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>
9 years agompc83xx: preempt premature board support removal by setting GENERIC_BOARD
Kim Phillips [Tue, 17 Mar 2015 17:00:45 +0000 (12:00 -0500)]
mpc83xx: preempt premature board support removal by setting GENERIC_BOARD

Boards that haven't been converted to GENERIC_BOARD does
*not* mean they should be removed.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9 years agotravis.yml: add more targets to build on travis
Heiko Schocher [Tue, 17 Mar 2015 07:21:41 +0000 (08:21 +0100)]
travis.yml: add more targets to build on travis

- add more targets for building with buildman:
  - avr32
  - m68k

and while at it, sort the list alphabetical

Reviewed-by: Roger Meier <r.meier@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
9 years agopowerpc: ppc4xx: remove korat board support
Masahiro Yamada [Tue, 17 Mar 2015 03:28:09 +0000 (12:28 +0900)]
powerpc: ppc4xx: remove korat board support

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Larry Johnson <lrj@acm.org>
9 years agopowerpc: mpc5xxx: remove galaxy5200 board support
Masahiro Yamada [Tue, 17 Mar 2015 03:28:08 +0000 (12:28 +0900)]
powerpc: mpc5xxx: remove galaxy5200 board support

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Eric Millbrandt <emillbrandt@dekaresearch.com>
9 years agopowerpc: ppc4xx: remove W7OLMC/W7OLMG board support
Masahiro Yamada [Tue, 17 Mar 2015 03:28:07 +0000 (12:28 +0900)]
powerpc: ppc4xx: remove W7OLMC/W7OLMG board support

They have not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Erik Theisen <etheisen@mindspring.com>
9 years agopowerpc: mpc5xxx: remove aev, TB5200 board support
Masahiro Yamada [Tue, 17 Mar 2015 03:28:06 +0000 (12:28 +0900)]
powerpc: mpc5xxx: remove aev, TB5200 board support

They have not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agopowerpc: ppc4xx: remove JSE board support
Masahiro Yamada [Tue, 17 Mar 2015 03:28:05 +0000 (12:28 +0900)]
powerpc: ppc4xx: remove JSE board support

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Stephen Williams <steve@icarus.com>
9 years agopowerpc: mpc5xxx: remove BC3450 board support
Masahiro Yamada [Tue, 17 Mar 2015 03:28:04 +0000 (12:28 +0900)]
powerpc: mpc5xxx: remove BC3450 board support

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agoboard/BuR/common: use SYS_CONSOLE_OVERWRITE
Hannes Petermaier [Tue, 17 Mar 2015 14:31:21 +0000 (15:31 +0100)]
board/BuR/common: use SYS_CONSOLE_OVERWRITE

We don't want that CONSOLE is redirected to LCD upon init, we rather prefer
that console is still on the serial line.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
9 years agommc: fsl_esdhc fix register offset
Peng Fan [Tue, 10 Mar 2015 07:35:46 +0000 (15:35 +0800)]
mmc: fsl_esdhc fix register offset

Commit f022d36e8a4517b2a9d25ff2d75bd2459d0c68b1 introduces
error register offset.

Change the "char reserved3[59]" to "char reserved3[56]".

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
9 years agoodroid: defconfig: fix build break caused by missing dts
Przemyslaw Marczak [Tue, 10 Mar 2015 09:52:59 +0000 (10:52 +0100)]
odroid: defconfig: fix build break caused by missing dts

The build break was caused by one of my previous commit:
'odroid: defconfig: disable memset at malloc init'

It removes the dts from odroid defconfig - rebase mistake.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
9 years agoboard/BuR/common: fix compiler warning
Hannes Petermaier [Mon, 16 Mar 2015 18:20:31 +0000 (19:20 +0100)]
board/BuR/common: fix compiler warning

Signed-off-by: Hannes Petermaier <hannes.petermaier@br-automation.com>
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
9 years agoMerge branch 'master' of git://git.denx.de/u-boot-uniphier
Tom Rini [Sun, 15 Mar 2015 18:31:39 +0000 (14:31 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-uniphier

9 years agokconfig: remove meaningless prefixes in defconfig files
Masahiro Yamada [Thu, 12 Mar 2015 04:24:39 +0000 (13:24 +0900)]
kconfig: remove meaningless prefixes in defconfig files

Since commit e02ee2548afe (kconfig: switch to single .config
configuration), the prefixes in defconfig files such as "+S:",
"+ST:", etc., are meaningless.

This commit was generated by the following command:

  find configs -name '*_defconfig' | xargs sed -i 's/^+*S*T*://'

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agoMAKEALL: Don't try to print size when ./u-boot is deleted
Joe Hershberger [Wed, 11 Mar 2015 23:47:33 +0000 (18:47 -0500)]
MAKEALL: Don't try to print size when ./u-boot is deleted

In the case of BUILD_NBUILDS > 1, MAKEALL would try to print the size
immediately after the u-boot binary is deleted by the call to:

make -s clean

Move the size print to before the clean

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
9 years agoARM: UniPhier: adjust device trees for business transfer
Masahiro Yamada [Wed, 11 Mar 2015 06:54:46 +0000 (15:54 +0900)]
ARM: UniPhier: adjust device trees for business transfer

Panasonic's System LSI products, UniPhier SoC family, have been
transferred to Socionext Inc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agogit-mailrc: update Masahiro's email address
Masahiro Yamada [Wed, 11 Mar 2015 04:01:36 +0000 (13:01 +0900)]
git-mailrc: update Masahiro's email address

I have transferred to Socionext Inc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agoMAINTAINERS: update Masahiro's email address
Masahiro Yamada [Wed, 11 Mar 2015 04:01:35 +0000 (13:01 +0900)]
MAINTAINERS: update Masahiro's email address

I have transferred to Socionext Inc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agoREADME: remove description about driver model configuration options (again)
Masahiro Yamada [Wed, 11 Mar 2015 08:34:25 +0000 (17:34 +0900)]
README: remove description about driver model configuration options (again)

The Driver Model description in README was removed by commit
65eb659e56fa (README: remove description about driver model
configuration options), and was revived by mistake by commit
b79dadf846e5 when resolving the conflict.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Tom Rini <trini@konsulko.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agoconfig_distro_bootcmd.h: add note on error handling
Stephen Warren [Tue, 10 Mar 2015 21:40:58 +0000 (15:40 -0600)]
config_distro_bootcmd.h: add note on error handling

This should make it more clear why there appear to be C pre-processor
symbols in the file that contain mixed case. They're really error
messages.

Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
9 years agobeagle_x15: increase phy autoneg timeout
Sekhar Nori [Tue, 10 Mar 2015 10:30:09 +0000 (16:00 +0530)]
beagle_x15: increase phy autoneg timeout

When Beagle X15 is connected to Gigabit switch, it takes
more time to finish auto-negotiation than on a 10/100 switch.

The default 4 second limit times-out more often than not. This is
observed when testing with a D-Link DGS-1008A desktop switch.

Increase the auto-negotiation time-out for Beagle-X15 to handle
this case.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agoARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973, 621766
Nishanth Menon [Mon, 9 Mar 2015 22:12:09 +0000 (17:12 -0500)]
ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973, 621766

RX51 has a secure logic which uses different parameters compared to
traditional implementation. So, make the generic secure acr write
over-ride-able by board file and refactor rx51 code to use this.

While at it, enable the OMAP3 specific errata code for 454179, 430973,
621766.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agoARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
Nishanth Menon [Mon, 9 Mar 2015 22:12:08 +0000 (17:12 -0500)]
ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766

Enable the OMAP3 specific errata code for 454179, 430973, 621766
and while at it, remove legacy non-revision checked errata logic.

Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Matt Porter <mporter@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agoARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configuration
Nishanth Menon [Mon, 9 Mar 2015 22:12:07 +0000 (17:12 -0500)]
ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configuration

Update to existing recommendation for L2ACTLR configuration to prevent
system instability and optimize performance.

These apply to both OMAP5 and DRA7.

Reported-by: Vivek Chengalvala <vchengalvala@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agoARM: DRA7 / OMAP5: Add workaround for ARM errata 798870
Praveen Rao [Mon, 9 Mar 2015 22:12:06 +0000 (17:12 -0500)]
ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870

This patch enables the workaround for ARM errata 798870 for OMAP5 /
DRA7 which says "If back-to-back speculative cache line fills (fill
A and fill B) are issued from the L1 data cache of a CPU to the
L2 cache, the second request (fill B) is then cancelled, and the
second request would have detected a hazard against a recent write or
eviction (write B) to the same cache line as fill B then the L2 logic
might deadlock."

An l2auxctlr accessor implementation for OMAP5 and DRA7 is introduced
here as well.

Signed-off-by: Praveen Rao <prao@ti.com>
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Matt Porter <mporter@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agoARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1
Nishanth Menon [Mon, 9 Mar 2015 22:12:05 +0000 (17:12 -0500)]
ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1

omap_smc1 is now generic enough to remove duplicate
omap3_gp_romcode_call logic that omap3 introduced.

As part of this change, move to using the generic lowlevel_init.S for
omap3 as well.

Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Matt Porter <mporter@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agoARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs
Nishanth Menon [Mon, 9 Mar 2015 22:12:04 +0000 (17:12 -0500)]
ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs

This is in preperation of using generic cross OMAP code.

Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Matt Porter <mporter@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agoARM: OMAP: Change set_pl310_ctrl_reg to be generic
Nishanth Menon [Mon, 9 Mar 2015 22:12:03 +0000 (17:12 -0500)]
ARM: OMAP: Change set_pl310_ctrl_reg to be generic

set_pl310_ctrl_reg does use the Secure Monitor Call (SMC) to setup
PL310 control register, however, that is something that is generic
enough to be used for OMAP5 generation of processors as well. The only
difference being the service being invoked for the function.

So, convert the service to a macro and use a generic name (same as
that used in Linux for some consistency). While at that, also add a
data barrier which is necessary as per recommendation.

While at this, smc #0 is maintained as handcoded assembly thanks to
various gcc version eccentricities, discussion thread:
http://marc.info/?t=142542166800001&r=1&w=2

Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Matt Porter <mporter@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agoARM: Introduce erratum workaround for 621766
Nishanth Menon [Mon, 9 Mar 2015 22:12:02 +0000 (17:12 -0500)]
ARM: Introduce erratum workaround for 621766

621766: Under a specific set of conditions, executing a sequence of
NEON or vfp load instructions can cause processor deadlock
Impacts: Every Cortex-A8 processors with revision lower than r2p1
Work around: Set L1NEON to 1

Based on ARM errata Document revision 20.0 (13 Nov 2010)

Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Matt Porter <mporter@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agoARM: Introduce erratum workaround for 430973
Nishanth Menon [Mon, 9 Mar 2015 22:12:01 +0000 (17:12 -0500)]
ARM: Introduce erratum workaround for 430973

430973: Stale prediction on replaced inter working branch causes
Cortex-A8 to execute in the wrong ARM/Thumb state
Impacts: Every Cortex-A8 processors with revision lower than r2p1
Work around: Set IBE to 1

Based on ARM errata Document revision 20.0 (13 Nov 2010)

Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Matt Porter <mporter@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agoARM: Introduce erratum workaround for 454179
Nishanth Menon [Mon, 9 Mar 2015 22:12:00 +0000 (17:12 -0500)]
ARM: Introduce erratum workaround for 454179

454179: Stale prediction may inhibit target address misprediction on
next predicted taken branch
Impacts: Every Cortex-A8 processors with revision lower than r2p1
Work around:  Set IBE and disable branch size mispredict to 1

Also provide a hook for SoC specific handling to take place if needed.

Based on ARM errata Document revision 20.0 (13 Nov 2010)

Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Matt Porter <mporter@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agoARM: Introduce erratum workaround for 798870
Nishanth Menon [Mon, 9 Mar 2015 22:11:59 +0000 (17:11 -0500)]
ARM: Introduce erratum workaround for 798870

Add workaround for Cortex-A15 ARM erratum 798870 which says
"If back-to-back speculative cache line fills (fill A and fill B) are
issued from the L1 data cache of a CPU to the L2 cache, the second
request (fill B) is then cancelled, and the second request would have
detected a hazard against a recent write or eviction (write B) to the
same cache line as fill B then the L2 logic might deadlock."

Implementations for SoC families such as Exynos, OMAP5/DRA7 etc
will be widely different.

Every SoC has slightly different manner of setting up access to L2ACLR
and similar registers since the Secure Monitor handling of Secure
Monitor Call(smc) is diverse. Hence an weak function is introduced
which may be overriden to implement SoC specific accessor implementation.

Based on ARM errata Document revision 18.0 (22 Nov 2013)

Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Matt Porter <mporter@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agoam335x_evm_usbspl: Remove other SPL modes
Tom Rini [Mon, 9 Mar 2015 16:40:36 +0000 (12:40 -0400)]
am335x_evm_usbspl: Remove other SPL modes

The purpose of this build target is to do SPL over USB RNDIS.  We remove
YMODEM, MMC and NAND (and re-set ENV to be built-in) as when those are needed
we can use the other build targets.  This brings us well under size limit again.

Signed-off-by: Tom Rini <trini@konsulko.com>
9 years agomx6sabre: Do not enable UMS with SPL
Fabio Estevam [Mon, 9 Mar 2015 21:44:39 +0000 (18:44 -0300)]
mx6sabre: Do not enable UMS with SPL

Since commit ad8aae82b20ac6a ("mx6sabre: Enable User Mass Storage") SPL target
does not boot anymore due to the increased spl image size.

Only enable USB Mass Storage for the non-SPL target.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agowarp: Select CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
Fabio Estevam [Thu, 12 Mar 2015 01:52:15 +0000 (22:52 -0300)]
warp: Select CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE

Warp has a DDR eMMC, so enable CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE for better
performance:

reading zImage
5790288 bytes read in 117 ms (47.2 MiB/s)

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
9 years agomx6_common: Do not select esdhc DDR mode for all boards
Fabio Estevam [Thu, 12 Mar 2015 01:52:14 +0000 (22:52 -0300)]
mx6_common: Do not select esdhc DDR mode for all boards

CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE should be selected only by boards that really
have a DDR-capable eMMC, so remove this option from common code to avoid
regressions.

Reported-by: Stefan Roese <sr@denx.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Volodymyr Riazantsev <volodymyr.riazantsev@globallogic.com>
Tested-by: Stefan Roese <sr@denx.de>
9 years agomx53ard: Use the standard U-boot prompt
Fabio Estevam [Mon, 9 Mar 2015 15:49:56 +0000 (12:49 -0300)]
mx53ard: Use the standard U-boot prompt

By not defining CONFIG_SYS_PROMPT, the standard "=>" prompt is used, so remove
its definition.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
9 years agocommon/board_f.c: Enable IMX watchdog in init_func_watchdog_init()
Stefan Roese [Tue, 10 Mar 2015 07:04:36 +0000 (08:04 +0100)]
common/board_f.c: Enable IMX watchdog in init_func_watchdog_init()

Without this patch, the IMX watchdog will not be initialized. And therefor
not active. This patch fixes this by calling hw_watchdog_init() also when
CONFIG_IMX_WATCHDOG is defined.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
9 years agomx6: soc: Switch to cold reset
Dirk Behme [Mon, 9 Mar 2015 13:48:48 +0000 (14:48 +0100)]
mx6: soc: Switch to cold reset

Disable the warm reset and enable the cold reset for a more reliable
restart ('reset'). This is taken from the Linux kernel, see imx_src_init()
in arch/arm/mach-imx/src.c.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
9 years agoimx:mx6 remove duplicated includes
Peng Fan [Wed, 4 Mar 2015 13:33:15 +0000 (21:33 +0800)]
imx:mx6 remove duplicated includes

There is no need to include asm/bootm.h twice, so remove one.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
9 years agomx6sabre_common.h: remove deprecated mmc open/close
maxin.john@enea.com [Tue, 3 Mar 2015 14:48:41 +0000 (15:48 +0100)]
mx6sabre_common.h: remove deprecated mmc open/close

Replace "mmc open/close" with "mmc dev" in mx6sabre_common.h as those commands
were removed with this commit: 614b2bf1c9bf80dbad24f5e5ce1d115bf24a831d

    cmd_mmc.c: Drop open/close mmc sub-commands

Signed-off-by: Maxin B. John <maxin.john@enea.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
9 years agowarp: Add a README file
Fabio Estevam [Mon, 2 Mar 2015 15:57:22 +0000 (12:57 -0300)]
warp: Add a README file

Provide instructions on how to upgrade U-boot in the eMMC.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
9 years agowarp: Add Device Firmware Upgrade support
Fabio Estevam [Mon, 2 Mar 2015 13:17:17 +0000 (10:17 -0300)]
warp: Add Device Firmware Upgrade support

Device Firmware Upgrade (DFU) is a very convenient mechanism to upgrade U-boot
on the eMMC.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
9 years agonovena: Use the default CONFIG_SYS_PBSIZE
Fabio Estevam [Mon, 2 Mar 2015 17:14:38 +0000 (14:14 -0300)]
novena: Use the default CONFIG_SYS_PBSIZE

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
9 years agowarp: Use the default CONFIG_SYS_PBSIZE
Fabio Estevam [Mon, 2 Mar 2015 17:14:37 +0000 (14:14 -0300)]
warp: Use the default CONFIG_SYS_PBSIZE

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Cc: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
9 years agonitrogen6x: Use the default CONFIG_SYS_PBSIZE
Fabio Estevam [Mon, 2 Mar 2015 17:14:36 +0000 (14:14 -0300)]
nitrogen6x: Use the default CONFIG_SYS_PBSIZE

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
9 years agohummingboard: Use the default CONFIG_SYS_PBSIZE
Fabio Estevam [Mon, 2 Mar 2015 17:14:35 +0000 (14:14 -0300)]
hummingboard: Use the default CONFIG_SYS_PBSIZE

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
9 years agowandboard: Use the default CONFIG_SYS_PBSIZE
Fabio Estevam [Mon, 2 Mar 2015 17:14:34 +0000 (14:14 -0300)]
wandboard: Use the default CONFIG_SYS_PBSIZE

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
9 years agomxs: Use the default CONFIG_SYS_PBSIZE
Fabio Estevam [Mon, 2 Mar 2015 17:14:33 +0000 (14:14 -0300)]
mxs: Use the default CONFIG_SYS_PBSIZE

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
9 years agomx25pdk: Use the default CONFIG_SYS_PBSIZE
Fabio Estevam [Mon, 2 Mar 2015 17:14:32 +0000 (14:14 -0300)]
mx25pdk: Use the default CONFIG_SYS_PBSIZE

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
9 years agomx31pdk: Use the default CONFIG_SYS_PBSIZE
Fabio Estevam [Mon, 2 Mar 2015 17:14:31 +0000 (14:14 -0300)]
mx31pdk: Use the default CONFIG_SYS_PBSIZE

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Cc: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Magnus Lilja <lilja.magnus@gmail.com>
9 years agomx35pdk: Use the default CONFIG_SYS_PBSIZE
Fabio Estevam [Mon, 2 Mar 2015 17:14:30 +0000 (14:14 -0300)]
mx35pdk: Use the default CONFIG_SYS_PBSIZE

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
9 years agomx51evk: Use the default CONFIG_SYS_PBSIZE
Fabio Estevam [Mon, 2 Mar 2015 17:14:29 +0000 (14:14 -0300)]
mx51evk: Use the default CONFIG_SYS_PBSIZE

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
9 years agomx53loco: Use the default CONFIG_SYS_PBSIZE
Fabio Estevam [Mon, 2 Mar 2015 17:14:28 +0000 (14:14 -0300)]
mx53loco: Use the default CONFIG_SYS_PBSIZE

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Cc: Jason Liu <r64343@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jason Liu <r64343@freescale.com>
9 years agomx6qarm2: Use the default CONFIG_SYS_PBSIZE
Fabio Estevam [Mon, 2 Mar 2015 17:14:27 +0000 (14:14 -0300)]
mx6qarm2: Use the default CONFIG_SYS_PBSIZE

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Cc: Jason Liu <r64343@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jason Liu <r64343@freescale.com>
9 years agomx6slevk: Use the default CONFIG_SYS_PBSIZE
Fabio Estevam [Mon, 2 Mar 2015 17:14:26 +0000 (14:14 -0300)]
mx6slevk: Use the default CONFIG_SYS_PBSIZE

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Cc: Jason Liu <r64343@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jason Liu <r64343@freescale.com>
9 years agomx6sxsabresd: Use the default CONFIG_SYS_PBSIZE
Fabio Estevam [Mon, 2 Mar 2015 17:14:25 +0000 (14:14 -0300)]
mx6sxsabresd: Use the default CONFIG_SYS_PBSIZE

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
9 years agoMerge branch 'master' of git://git.denx.de/u-boot-tegra
Tom Rini [Tue, 10 Mar 2015 23:09:18 +0000 (19:09 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-tegra

Conflicts:
README

Signed-off-by: Tom Rini <trini@konsulko.com>
9 years agosunxi: video: Fix VIDEO_LCD_PANEL_I2C being enabled by default
Hans de Goede [Sat, 7 Mar 2015 11:00:02 +0000 (12:00 +0100)]
sunxi: video: Fix VIDEO_LCD_PANEL_I2C being enabled by default

Fix a typo in board/sunxi/Kconfig which caused VIDEO_LCD_PANEL_I2C to be
enabled on all sunxi boards. Also fix a compile error which shows up once
VIDEO_LCD_PANEL_I2C is actually disabled on most boards as it should be.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
9 years agosunxi: Add Wexler TAB7200 support
Aleksei Mamlin [Wed, 4 Mar 2015 07:44:18 +0000 (10:44 +0300)]
sunxi: Add Wexler TAB7200 support

This patch add support for Wexler TAB7200 tablet.

The Wexler TAB7200 is a A20 based tablet with 7 inch display(800x480),
capacitive touchscreen(5 fingers), 1G RAM, 4G NAND, micro SD card slot,
mini HDMI port, 3.5mm audio plug, 1 USB OTG port and 1 USB 2.0 port.

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
9 years agosunxi: Ippo_q8h defconfigs: Enable otg vbus detection using AXP223 PMIC
Chen-Yu Tsai [Mon, 9 Mar 2015 07:44:17 +0000 (15:44 +0800)]
sunxi: Ippo_q8h defconfigs: Enable otg vbus detection using AXP223 PMIC

Use the AXP223 PMIC to detect VBUS for musb otg support.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
9 years agosunxi: musb: Support checking VBUS using AXP221 PMIC
Chen-Yu Tsai [Mon, 9 Mar 2015 07:44:16 +0000 (15:44 +0800)]
sunxi: musb: Support checking VBUS using AXP221 PMIC

This enables the musb glue layer to use the AXP221's VBUS detection
function to check for VBUS. This fixes otg support on the A23 q8h
tablets.

Note that u-boot never calls musb_shutdown(), so once VBUS is enabled,
it is never disabled until the system is powered off, or the OS does
so. This can be used to our advantage to keep VBUS powered into the
OS, where support for AXP221 is not available yet.

Fixes: 52defe8f6570 ("sunxi: musb: Check Vbus-det before enabling otg port power")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
9 years agosunxi: axp221: Add VBUS detection support
Chen-Yu Tsai [Mon, 9 Mar 2015 07:44:15 +0000 (15:44 +0800)]
sunxi: axp221: Add VBUS detection support

Some of the AXP PMICs support VBUS detection, i.e. checking whether
VBUS power input is available and usable (supplied by an external
source). A few boards use this instead of a separate GPIO to detect
VBUS on USB OTG.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
9 years agosun7i: Add support for the Orange Pi Mini board
Hans de Goede [Sat, 7 Mar 2015 14:03:00 +0000 (15:03 +0100)]
sun7i: Add support for the Orange Pi Mini board

The Orange Pi Mini is an A20 based development board featuring 1G RAM, HDMI,
1Gbit ethernet, USB wifi, SATA, 2 sdcard slots (use the top one for booting),
2 USB 2.0 A receptacles, a micro USB B receptacle (otg) and a 3 ring 3.5 mm
jack connector for A/V.

Also see: http://www.orangepi.org/

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
9 years agosun7i: Add support for the Orange Pi board
Hans de Goede [Sat, 7 Mar 2015 14:01:46 +0000 (15:01 +0100)]
sun7i: Add support for the Orange Pi board

The Orange Pi is an A20 based development board featuring 1G RAM, HDMI & VGA,
1Gbit ethernet, USB wifi, SATA, 4 USB 2.0 A receptacles, a micro USB B
receptacle (otg) and a 3 ring 3.5 mm jack connector for A/V.

Also see: http://www.orangepi.org/

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
9 years agosun7i: Add support for the Wits Pro A20 DKT board
Hans de Goede [Sat, 7 Mar 2015 11:01:16 +0000 (12:01 +0100)]
sun7i: Add support for the Wits Pro A20 DKT board

The Wits Pro A20 DKT is an A20 Development KiT with 1G RAM, 4G NAND, sdio wifi,
1Gbit ethernet, 1024x768 lcd screen with ft5x_ts touchscreen and a ton of
IO connectors.

Note there seem to be multiple sdcard slots on the board (4 in total), but
other then mmc0 none of these are hooked up by default, there is a ton of
dip-switches which likely allow hooking some of these up, but the documentation
of the board only describes the use of a fraction of them, so for now we
only support mmc0.

Also see: http://www.merrii.com/en/pla_d.asp?id=163

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
9 years agosunxi: Add support for the Forfun Q88DB tablet
Jens Lucius [Tue, 3 Mar 2015 21:45:06 +0000 (22:45 +0100)]
sunxi: Add support for the Forfun Q88DB tablet

The Forfun Q88DB is an A13 tablet in the common Q8 format.

Features are 512MB RAM, 4GB NAND, 7" Display, RTL8188 Wifi, 2 cameras.

For more details see: http://linux-sunxi.org/Forfun_Q88DB

Signed-off-by: Jens Lucius <info@jenslucius.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
9 years agosun6i: Add support for the Mele I7 board
Marcus Cooper [Sat, 28 Feb 2015 14:00:57 +0000 (15:00 +0100)]
sun6i: Add support for the Mele I7 board

The Mele I7 is a Allwinner based Android TV box.

It features a A31 SOC, 1G RAM, 8GB NAND, HDMI out, A/V out,
SPDIF, IrDA, 3 USB A, 1 USB micro OTG and Wireless LAN.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
9 years agosun7i: Add support for the MK808C board
Marcus Cooper [Sat, 28 Feb 2015 14:00:35 +0000 (15:00 +0100)]
sun7i: Add support for the MK808C board

The MK808C is a Allwinner based Android TV dongle.

It features a A20 SOC, 1G RAM, 8GB NAND, HDMI out, A/V out,
1 USB A, 1 USB mini OTG, Bluetooth and Wireless LAN.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
9 years agosunxi: Add support for the Jesurun Q5 board
Gábor Nyers [Thu, 26 Feb 2015 11:08:15 +0000 (12:08 +0100)]
sunxi: Add support for the Jesurun Q5 board

The Jesurun Q5 has a black plastic casing with the approximate dimensions of
100mm x 100mm x 24mm with rounded edges. In terms of hardware it features an
Allwinner A10 SoC with 1GB RAM and 8GB of NAND flash. The storage capacity can
be extended up to 32GB with a MicroSD card. The external connectors are: 2x
USB-A female supporting USB2.0, 3.5mm female jack for audio, HDMI female,
SPDIF, RJ45 LAN and Power. In addition the device has 1x red LED (hard wired to
power) and an programmable green led. On the board there is also an unpopulated
IR receiver and the UART. The devices is equipped with an AXP209 PMU.

For more details see: http://linux-sunxi.org/Jesurun_Q5

Signed-off-by: Gábor Nyers <gnyers@opensuse.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
9 years agosunxi: Make CONFIG_DRAM_TPR3 apply to sun[57]i
Adam Sampson [Mon, 23 Feb 2015 20:44:10 +0000 (20:44 +0000)]
sunxi: Make CONFIG_DRAM_TPR3 apply to sun[57]i

The tpr3 (timing skew) parameter is used in all supported versions of
the sunxi DRAM controller, but it was only enabled for sun4i in
47e3501a76894f4ba08bc61f33774bd5d39ff464.

Signed-off-by: Adam Sampson <ats@offog.org>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
9 years agocommon: cmd_elf: Add support to disable start of application
Siva Durga Prasad Paladugu [Mon, 9 Mar 2015 11:46:47 +0000 (12:46 +0100)]
common: cmd_elf: Add support to disable start of application

Added support to disable the start of application by using
a environment variable autostart

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
9 years agoarmv8/vexpress64: make multientry conditional
Linus Walleij [Mon, 9 Mar 2015 09:53:21 +0000 (10:53 +0100)]
armv8/vexpress64: make multientry conditional

While the Freescale ARMv8 board LS2085A will enter U-Boot both
on a master and a secondary (slave) CPU, this is not the common
behaviour on ARMv8 platforms. The norm is that U-Boot is entered
from the master CPU only, while the other CPUs are kept in
WFI (wait for interrupt) state.

The code determining which CPU we are running on is using the
MPIDR register, but the definition of that register varies with
platform to some extent, and handling multi-cluster platforms
(such as the Juno) will become cumbersome. It is better to only
enable the multiple entry code on machines that actually need
it and disable it by default.

Make the single entry default and add a special
ARMV8_MULTIENTRY KConfig option to be used by the
platforms that need multientry and set it for the LS2085A.
Delete all use of the CPU_RELEASE_ADDR from the Vexpress64
boards as it is just totally unused and misleading, and
make it conditional in the generic start.S code.

This makes the Juno platform start U-Boot properly.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
9 years agocommon/board_r: Restore non-cached memory setup
Jan Kiszka [Mon, 9 Mar 2015 06:47:18 +0000 (07:47 +0100)]
common/board_r: Restore non-cached memory setup

This fixes a regression of e310b93ec1, affecting Ethernet on the Jetson
TK1, e.g.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
9 years agoARM: PSCI: Rework the DT handler slightly
Tom Rini [Fri, 6 Mar 2015 01:19:36 +0000 (20:19 -0500)]
ARM: PSCI: Rework the DT handler slightly

The way the PSCI DT update happens currently means we pull in
<asm/armv7.h> everywhere, including on ARMv8 and that in turn brings in
<asm/io.h> for some non-PSCI related things that header needs to deal
with.

To fix this, we rework the hook slightly.  A good portion of
arch/arm/cpu/armv7/virt-dt.c is common looking and I hope that when PSCI
is needed on ARMv8 we can re-use this by and large.  So rename the
current hook to psci_update_dt(), move the prototype to <asm/psci.h> and
add an #ifdef that will make re-use later easier.

Reported-by: York Sun <yorksun@freescale.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: York Sun <yorksun@freescale.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: York Sun <yorksun@freescale.com>
9 years agotegra-common: increase malloc pool len by dfu mmc file buffer size
Przemyslaw Marczak [Wed, 4 Mar 2015 13:01:30 +0000 (14:01 +0100)]
tegra-common: increase malloc pool len by dfu mmc file buffer size

The dfu mmc file buffer, which was static, now is allocated
by memalign(), so the malloc pool len should be also increased.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Tom Warren <twarren.nvidia@gmail.com>
9 years agoti-armv7-common: increase malloc pool len by dfu mmc file buffer size
Przemyslaw Marczak [Wed, 4 Mar 2015 13:01:29 +0000 (14:01 +0100)]
ti-armv7-common: increase malloc pool len by dfu mmc file buffer size

The dfu mmc file buffer, which was static, now is allocated
by memalign(), so the malloc pool len should be also increased.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Tom Rini <trini@konsulko.com>
9 years agozynq-common: increase malloc pool len by dfu mmc file buffer size
Przemyslaw Marczak [Wed, 4 Mar 2015 13:01:28 +0000 (14:01 +0100)]
zynq-common: increase malloc pool len by dfu mmc file buffer size

The dfu mmc file buffer, which was static, now is allocated
by memalign(), so the malloc pool len should be also increased.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: Michal Simek <michal.simek@xilinx.com>