Merge branch 'master' of git://git.denx.de/u-boot-nds32

Move FTMAC100 to where it should be, alphabetically in
drivers/net/Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
Conflicts:
drivers/net/Kconfig

Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

nds32: eth: Support ftmac100 DM.

Support Andestech eth ftmac100 device tree flow on AG101P/AE3XX platform.
Verification:
 Boot linux kernel via dhcp and bootm ok.

 NDS32 # setenv bootm_size 0x2000000;setenv fdt_high 0x1f00000;
 NDS32 # dhcp 0x600000 10.0.4.97:boomimage-310y-ae300-spi.bin
 BOOTP broadcast 1
 BOOTP broadcast 2
 BOOTP broadcast 3
 BOOTP broadcast 4
 DHCP client bound to address 10.0.4.178 (4899 ms)
Using mac@e0100000 device
TFTP from server 10.0.4.97; our IP address is 10.0.4.178
Filename 'boomimage-310y-ae300-spi.bin'.
Load address: 0x600000
Loading: #################################################################
         #################################################################
         #################################################################
...
...
         ###################################
         233.4 KiB/s
 done
 Bytes transferred = 13872076 (d3abcc hex)
NDS32 # dhcp 0x2000000 10.0.4.97:ae300.dtb
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
DHCP client bound to address 10.0.4.178 (4592 ms)
Using mac@e0100000 device
TFTP from server 10.0.4.97; our IP address is 10.0.4.178
Filename 'ae300.dtb'.
Load address: 0x2000000
Loading: #
         82 KiB/s
 done
 Bytes transferred = 2378 (94a hex)
NDS32 # bootm 0x600000 - 0x2000000
 Image Name:
 Created:      2017-03-22   6:52:03 UTC
 Image Type:   NDS32 Linux Kernel Image (uncompressed)
 Data Size:    13872012 Bytes = 13.2 MiB
 Load Address: 0000c000
 Entry Point:  0000c000
 Verifying Checksum ... OK
 Booting using the fdt blob at 0x2000000
 Loading Kernel Image ... OK
 Loading Device Tree to 01efc000, end 01eff949 ... OK
 Linux version 3.10.102-20375-gb0034c1-dirty (rick@app09)
(gcc version 4.9.3 (2016-07-06_nds32le-linux-glibc-v3_experimental) )
  #293 PREEMPT Wed Mar 22 14:49:28 CST 2017
CPU: NDS32 N13, AndesCore ID(wb), CPU_VER 0x0d11103f(id 13, rev 17, cfg 4159)
...
...
Signed-off-by: rick <rick@andestech.com>

mksunxi_fit_atf.sh: Allow for this to complete when bl31.bin is missing

In situations like an autobuilder we are likely to not have bl31.bin
present and thus would fail to build and propagate the error upwards.
Instead, print a big warning to stderr so that human will see that
something is wrong but complete the build.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-sunxi

trini: Make Kconfig SPL_xxx entires only show if SPL, so that we don't
get Kconfig errors on platforms without SPL, ie sandbox (without SPL).

Signed-off-by: Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://git.denx.de/u-boot-usb

Merge branch 'master' of git://git.denx.de/u-boot-nds32

ColdFire: Remove rogue 'CONFIG_SYS_NO_FLASH' embedded within another CONFIG_ name

The original commit for the MCF54418TWR ColdFire development board
support defined a 'CONFIG_SYS_FAULT_ECCONFIG_SYS_NO_FLASHHO_LINK_DOWN'
which obviously has a rogue 'CONFIG_SYS_NO_FLASH' embedded in the
intended 'CONFIG_SYS_FAULT_ECHO_LINK_DOWN' define.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>

sandbox: Enable CMD_GETTIME

Enable this option by default on sandbox to increase build coverage.

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_LZMADEC to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_LZMADEC

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_LZMA to Kconfig

This converts the following to Kconfig:
   CONFIG_LZMA

Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig: Drop CONFIG_CMD_LOADY

This is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_KGDB to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_KGDB

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_IRQ to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_IRQ

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

fs: Kconfig: Add a separate option for FS_JFFS2

Rather than using CMD_JFFS2 for both the filesystem and its command, we
should have a separate option for each. This allows us to enable JFFS2
support without the command, if desired, which reduces U-Boot's size
slightly.

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_JFFS2 to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_JFFS2

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_IOTRACE to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_IOTRACE

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_IOLOOP to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_IOLOOP

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_IO to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_IO

Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig: Drop CONFIG_CMD_IMX_FUSE

This option is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig: Drop CONFIG_CMD_IMXOTP

This option is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_IMMAP to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_IMMAP

Also move this command out of the cmd/ directory since it is
PowerPC-specific.

Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig: Add a CONFIG_IDE option

At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate
CONFIG_IDE option so that IDE support can be enabled without requiring
the 'ide' command.

Update existing users and move the ide driver into drivers/block since
it should not be in common/.

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_IDE to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_IDE

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_HDMIDETECT to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_HDMIDETECT

Note that we cannot do 'default y if VIDEO' because this option is only
enabled for a small subset of mx6 boards. Also this command is is not a
great implementation (it doesn't use driver model).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_CMD_HD44760 to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_HD44760

Also drop CONFIG_CMD_HD44780 which appears to be a typo.

Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig: Add CONFIG_HASH to enable hashing API

At present CONFIG_CMD_HASH enables the 'hash' command which also brings
in the hashing API. Some boards may wish to enable the API without the
command. Add a separate CONFIG to permit this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_CMD_HASH to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_HASH

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Rework slightly, enable on some boards again]
Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_CMD_GSC to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_GSC

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_GETTIME to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_GETTIME

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_CMD_FUSE to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_FUSE

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_FPGA_LOADBP et al to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_FPGA_LOADBP
   CONFIG_CMD_FPGA_LOADFS
   CONFIG_CMD_FPGA_LOADMK
   CONFIG_CMD_FPGA_LOADP

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_FPGAD to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_FPGAD

Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig: Drop CONFIG_CMD_FDT_MAX_DUMP

This option is not used by any board. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_FDC to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_FDC

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_ETHSW to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ETHSW

Also enable it for sandbox to increase build coverage.

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_ESBC_VALIDATE to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ESBC_VALIDATE

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_CMD_ERRATA to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ERRATA

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_CMD_ENV_FLAGS to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ENV_FLAGS

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_ENV_CALLBACK to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ENV_CALLBACK

Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig: Drop CONFIG_CMD_ENV

This option is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_ENTERRCM to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ENTERRCM

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_EEPROM et al to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_EEPROM
   CONFIG_CMD_EEPROM_LAYOUT
   CONFIG_EEPROM_LAYOUT_HELP_STRING

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
platforms]
Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_CMD_EECONFIG to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_EECONFIG

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_ECCTEST to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ECCTEST

Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig: Drop CONFIG_SYS_I2C_DS4510_ADDR

This is only used by one board and always set to 0x51. Drop this option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Kconfig: Drop CONFIG_SYS_I2C_DS1621_ADDR

Now that dtt is gone, this is not used. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>

Drop digital thermometer and thermostat (DTT) drivers

This subsystem is quite old. It has been replaced with a driver-model
version (UCLASS_THERMAL). Boards are free to convert to that if required,
but here is a removal patch that could be applied in the meantime.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>

Drop three-wire serial (TWS) support

This subsystem has not been converted to driver model, there is only one
driver and only one board that uses it. Drop it and its CONFIG option.

Also drop the rtc4543 RTC driver since it uses TWS.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Kconfig: Drop CONFIG_SYS_I2C_DTT_ADDR

This option is only defined to a non-default value by canyonlands, which
needs conversion to driver model (where the I2C address would be defined
by the device tree).

Drop this option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Convert CONFIG_DS4510 to Kconfig

This converts the following to Kconfig:
   CONFIG_DS4510

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Kconfig: Drop CONFIG_CMD_DS4510

This option enables a command in the driver. But the functions defined by
the driver are not called anywhere else in U-Boot. So it does not seem
useful to have this driver without its commands.

Drop this option, move the header file out of the common include/
directory and make all the function static.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Kconfig: Drop CONFIG_CMD_DS4510_RST

This option is only used in one driver and is not enabled by any board. It
does not seem worth having the ability to remove this part of the support.

Drop the option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Kconfig: Drop CONFIG_CMD_DS4510_MEM

This option is only used in one driver and is not enabled by any board. It
does not seem worth having the ability to remove this part of the support.

Drop the option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Kconfig: Drop CONFIG_CMD_DS4510_INFO

This option is only used in one driver and two boards. It does not seem
worth having the ability to remove this part of the support.

Drop the option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

lib: move hash CONFIG options to Kconfig

Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support
using hardware acceleration.") created entries for CONFIG_SHA1,
CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL.
However, no defconfig has migrated to it.  Complete the move by first
adding additional logic to various Kconfig files to select this when
required and then use the moveconfig tool.  In many cases we can select
these because they are required to implement other drivers.  We also
correct how we include the various hashing algorithms in SPL.

This commit was generated as follows (after Kconfig additions):

[1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL
[2] tools/moveconfig.py -y SHA_PROG_HW_ACCEL

Note:
We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously
because there is dependency between them.

Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Cc: Naveen Burmi <NaveenBurmi@freescale.com>
Cc: Po Liu <po.liu@freescale.com>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Priyanka Jain <Priyanka.Jain@freescale.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Chander Kashyap <k.chander@samsung.com>
Cc: Steve Rae <steve.rae@raedomain.com>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Feng Li <feng.li_2@nxp.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Cc: Mingkai Hu <Mingkai.Hu@freescale.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

FIT: Rename FIT_DISABLE_SHA256 to FIT_ENABLE_SHA256_SUPPORT

We rename CONFIG_FIT_DISABLE_SHA256 to CONFIG_FIT_ENABLE_SHA256_SUPPORT which
is enabled by default and now a positive option.  Convert the handful of boards
that were disabling it before to save space.

Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Lukasz Dalek <luk0104@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

test: py: Add cmd_echo dependency

There is missing dependency on echo command. Mark tests which requires
echo.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>

Convert CONFIG_SPL_BOARD_INIT to Kconfig

This converts the following to Kconfig:
   CONFIG_SPL_BOARD_INIT

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
[trini: Update the Kconfig logic]
Signed-off-by: Tom Rini <trini@konsulko.com>

usb: ehci: Add Renesas RCar M3/H3 EHCI support

Add a USB controller driver for the EHCI block in R8A7795/R8A7796 SoC.
This is a stopgap measure until we have proper DT support, clock and
reset framework in place, at which point we can switch to ehci-generic.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: Move address of IICDVFS(I2C) to rcar-gen3-base.h

The IICDVFS(I2C) set in r8a7796.h is common in rcar-gen3.
This moves CONFIG_SYS_I2C_SH_BASE0 in rcar-gen3-base.h.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

nds32: Support AE3XX platform.

Support Andestech AE3xx platform: serial, timer device tree flow.

Signed-off-by: rick <rick@andestech.com>

nds32: Support AG101P timer DM.

Support AG101P timer device tree flow.

Signed-off-by: rick <rick@andestech.com>

nds32: Support AG101P serial DM.

Support AG101P serial device tree flow.

Signed-off-by: rick <rick@andestech.com>

ARM: rmobile: salvator-x: Add R8A7796 support

Add minor ifdeffery and default board config for the Salvator-XS board
with R8A7796 M3 SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: salvator-x: Rename the defconfig to match the SoC

Rename the salvator-x_defconfig to r8a7795_salvator-x_defconfig in
preparation for the r8a7796 support on salvator-x board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: salvator-x: Enable SCIF2 clock

There are two UARTs on the board, so enable the clock for the
second one as well.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: salvator-x: Count all DRAM in all slots

Instead of counting only the DRAM in the first slot, count
all the DRAM in all slots and report it accordingly.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: salvator-x: Add USB support

Add support for the EHCI USB.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: salvator-x: Add DVFS and PMIC support

Add support for rebooting the board using the ROHM BD9571MWV I2C PMIC,
but keep the CPU reboot option as a fallback.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: salvator-x: Add RAVB ethernet support

Add support for the AVB ethernet on the Salvator-X board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: salvator-x: Add SD support

Add support for the SD card slots on the Salvator-X board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: salvator-x: Adjust UART clock

The UART uses internal SCIF clock except on R8A7795 H3 WS1.0 .
Use the internal clock and ignore the early version of the chip.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: salvator-x: Zap redefined DECLARE_GLOBAL_DATA_PTR

The macro is used twice in the salvator-x board file, drop one.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: salvator-x: Set default device tree

Set default device tree file in the salvator-x_defconfig
and use it in the environment.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: salvator-x: Move OF_LIBFDT and CMD_FDT to board config

Move these two Kconfig symbols to the salvator-x_defconfig.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: salvator-x: Use BIT() macro in board file

Cosmetic change, replace (1 << (n)) with BIT(n) .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: Allow R8A7796 Salvator-X configuration

The Salvator-X can have both H3 and M3 CPU on it, drop the
select R8A7795 to allow both configurations.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: Add R8A7796 support

Add Kconfig entry for the R8A7796 RCar M3 SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: Handle R8A7796 r1.1 in the PRR code

The R8A7796 r1.1 reports itself as r2.0 , add quirk into the
PRR code to fix this report.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: Add R8A7796 into the CPU table

Add entry for the R8A7796 RCar M3 SoC into the CPU info table.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: Add R8A7795 into the CPU table

Add entry for the R8A7795 RCar H3 SoC into the CPU info table.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: Make the Gen3 SoC configurable

Allow selecting the Gen3 SoC in preparation for RCar M3 .
No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: Update link address to match latest BL2

Update the CONFIG_SYS_TEXT_BASE to match BL2 Rev.1.0.9 and newer,
which loads the U-Boot to 0x50000000 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: Zap RCAR_GEN3_EXTRAM_BOOT

This Kconfig option is not used on any board, so drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: Import R8A7796 PFC and GPIO tables

Import the R8A7796 PFC and GPIO tables from the latest 3.5.3 release
from Renesas .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

ARM: rmobile: Update R8A7795 PFC and GPIO tables

Sync the PFC and GPIO tables with the latest 3.5.3 release from
Renesas . This adds ES2.0 support.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

serial: sh: Add r8a7796 support

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

net: ravb: Add Renesas Ethernet RAVB driver

Add driver for the Renesas Ethernet AVB block found in RCar H3/M3.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Based on work of:
Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Takeshi Kihara <takeshi.kihara.df@renesas.com>
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>

gpio: rcar_gen3: Fix GPIO read support

This patch fixes to read the GPIO status after confirming the
INOUT setting.

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Tom Rini <trini@konsulko.com>

net: usb: mcs7830: fix non-DM ingress path

The mcs7830_recv() (non-DM) function discards good packets and tries to
process "bad" packets due to incorrect test condition.
Fix the condition and return the proper value as described in function
doc.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Merge branch 'master' of git://git.denx.de/u-boot-socfpga

Merge branch 'master' of git://git.denx.de/u-boot-usb

ARM: dts: am335x-evm: disable mmc3

SDIO is not supported in u-boot, there is no point in enabling mmc3.
For this purpose, add u-boot specific dtsi that this will be included
automatically while building the dtb.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

scripts/Makefile.lib: Always have ...-u-boot.dtsi be able to override

The intention of having a -u-boot.dtsi file is to be able to make
changes to the provided upstream dts files as well as to be able to add
nodes.  Change the logic for adding the file from making it the last
included file at the top of the dts to being included at the end of the
file.

Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Merge branch 'master' of git://git.denx.de/u-boot-imx

Signed-off-by: Stefano Babic <sbabic@denx.de>

arm: socfpga: Enable build for Arria 10

Update Kconfig and Makefile to enable Arria 10.
Clean up Makefile and sorting *.o alphanumerically.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Add board files for the Arria10

Add support for the Arria10 SoCDK.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Add config and defconfig for Arria 10

Add config and defconfig for the Arria10 and update socfpga_common.h.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>