git.sur5r.net Git - u-boot/log

]> git.sur5r.net Git - u-boot/log

projects / u-boot / log

summary | shortlog | log | commit | commitdiff | tree
first ⋅ prev ⋅ next

commit | commitdiff | tree

Stefan Roese [Tue, 15 Nov 2011 08:02:11 +0000 (08:02 +0000)]

4xx_ibm_ddr2_autocalib.c: Fix GCC 4.6 build warnings

Fix:
4xx_ibm_ddr2_autocalib.c: In function 'get_membase':
4xx_ibm_ddr2_autocalib.c:157:8: warning: variable 'bxcf' set but not used [-Wunused-but-set-variable]
4xx_ibm_ddr2_autocalib.c: In function 'DQS_calibration_methodB':
4xx_ibm_ddr2_autocalib.c:722:8: warning: variable 'rffd' set but not used [-Wunused-but-set-variable]

Signed-off-by: Stefan Roese <sr@denx.de>

commit | commitdiff | tree

Stefan Roese [Tue, 15 Nov 2011 08:02:04 +0000 (08:02 +0000)]

4xx_pcie.c: Fix GCC 4.6 build warnings

Fix:
4xx_pcie.c: In function 'pcie_read_config':
4xx_pcie.c:230:6: warning: variable 'address' set but not used [-Wunused-but-set-variable]
4xx_pcie.c: In function 'pcie_write_config':
4xx_pcie.c:290:6: warning: variable 'address' set but not used [-Wunused-but-set-variable]
4xx_pcie.c: In function 'ppc4xx_setup_pcie_rootpoint':
4xx_pcie.c:1066:17: warning: variable 'rmbase' set but not used [-Wunused-but-set-variable]

Signed-off-by: Stefan Roese <sr@denx.de>

commit | commitdiff | tree

Stefan Roese [Tue, 15 Nov 2011 08:01:58 +0000 (08:01 +0000)]

4xx_enet.c: Fix GCC 4.6 build warnings

Fix:
4xx_enet.c: In function 'ppc_4xx_eth_init':
4xx_enet.c:875:6: warning: variable 'ethgroup' set but not used [-Wunused-but-set-variable]

I used "__maybe_unused" here intentionally, since all other
alternatives to fix this compilation warning would result in more
ifdef's.

Signed-off-by: Stefan Roese <sr@denx.de>

commit | commitdiff | tree

Stefan Roese [Tue, 15 Nov 2011 08:01:45 +0000 (08:01 +0000)]

usb_ohci.c: Fix GCC 4.6 build warnings

Fix:
usb_ohci.c: In function 'dl_transfer_length':
usb_ohci.c:756:8: warning: variable 'tdINFO' set but not used [-Wunused-but-set-variable]

Signed-off-by: Stefan Roese <sr@denx.de>

commit | commitdiff | tree

Anatolij Gustschin [Thu, 10 Nov 2011 12:21:44 +0000 (12:21 +0000)]

arch/powerpc/cpu/mpc512x/i2c.c: Fix GCC 4.6 warnings

Fix:
i2c.c: In function 'wait_for_bb':
i2c.c:81:16: warning: variable 'temp' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit | commitdiff | tree

Anatolij Gustschin [Thu, 10 Nov 2011 12:21:43 +0000 (12:21 +0000)]

arch/powerpc/cpu/mpc512x/pci.c: Fix GCC 4.6 warnings

Fix:
pci.c: In function 'pci_init_board':
pci.c:55:26: warning: variable 'pci_conf' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit | commitdiff | tree

Wolfgang Denk [Wed, 9 Nov 2011 09:29:06 +0000 (09:29 +0000)]

board/esd/cpci750/sdram_init.c: Fix GCC 4.6 build warnings

Fix:
sdram_init.c: In function 'check_dimm':
sdram_init.c:267:50: warning: variable 'trrd_clocks' set but not used
[-Wunused-but-set-variable]
sdram_init.c:267:37: warning: variable 'tras_clocks' set but not used
[-Wunused-but-set-variable]
sdram_init.c:267:24: warning: variable 'trcd_clocks' set but not used
[-Wunused-but-set-variable]
sdram_init.c:267:8: warning: variable 'trp_clocks' set but not used
[-Wunused-but-set-variable]
sdram_init.c:253:16: warning: variable 'spd_checksum' set but not used
[-Wunused-but-set-variable]
sdram_init.c: In function 'initdram':
sdram_init.c:1693:14: warning: variable 's1' set but not used
[-Wunused-but-set-variable]
sdram_init.c:1693:6: warning: variable 's0' set but not used
[-Wunused-but-set-variable]

Biggest part o the fix is converting the custom debug code to standard
debug().

No attempts were made to cleanup the code.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>

commit | commitdiff | tree

Wolfgang Denk [Wed, 9 Nov 2011 09:29:05 +0000 (09:29 +0000)]

board/esd/cpci750/cpci750.c: Fix error handling

ThE code recorded error conditions but did not pass these on to the
higher level caller. Fixing this fixes also this build warning:
cpci750.c: In function 'do_loadpci':
cpci750.c:569:6: warning: variable 'status' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>

commit | commitdiff | tree

Wolfgang Denk [Wed, 9 Nov 2011 09:29:04 +0000 (09:29 +0000)]

drivers/video/ct69000.c: Fix GC 4.6 build warning

Convert custom debug code to use standard debug() facility.
This also fixes these build warning:
ct69000.c: In function 'FindAndSetPllParamIntoXrRegs':
ct69000.c:706:28: warning: variable 'new_pixclock' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Anatolij Gustschin <agust@denx.de>

commit | commitdiff | tree

Wolfgang Denk [Wed, 9 Nov 2011 09:29:03 +0000 (09:29 +0000)]

common/cmd_universe.c: Fix GCC 4.6 build warning

Fix:
cmd_universe.c: In function 'universe_init':
cmd_universe.c:49:17: warning: variable 'lastError' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>

commit | commitdiff | tree

Wolfgang Denk [Wed, 9 Nov 2011 09:29:02 +0000 (09:29 +0000)]

common/cmd_fdc.c: Fix GCC 4.6 build warnings

Fix:
cmd_fdc.c: In function 'fdc_read_data':
cmd_fdc.c:435:6: warning: variable 'flags' set but not used
[-Wunused-but-set-variable]
cmd_fdc.c:432:16: warning: variable 'pcn' set but not used
[-Wunused-but-set-variable]
cmd_fdc.c:431:20: warning: variable 'lastblk' set but not used
[-Wunused-but-set-variable]

Note: no attempts were made to otherwise cleanup the code.

Signed-off-by: Wolfgang Denk <wd@denx.de>

commit | commitdiff | tree

Wolfgang Denk [Wed, 9 Nov 2011 09:29:01 +0000 (09:29 +0000)]

board/evb64260/zuma_pbb_mbox.c: Fix GCC 4.6 build warnings

Fix:
zuma_pbb_mbox.c: In function 'zuma_mbox_dump':
zuma_pbb_mbox.c:115:2: warning: dereferencing type-punned pointer will
break strict-aliasing rules [-Wstrict-aliasing]
zuma_pbb_mbox.c:117:2: warning: dereferencing type-punned pointer will
break strict-aliasing rules [-Wstrict-aliasing]

Signed-off-by: Wolfgang Denk <wd@denx.de>

commit | commitdiff | tree

Wolfgang Denk [Wed, 9 Nov 2011 09:29:00 +0000 (09:29 +0000)]

board/evb64260/zuma_pbb_mbox.c: CodingStyle cleanup

Make (mostly) checkpatch-clean

Signed-off-by: Wolfgang Denk <wd@denx.de>

commit | commitdiff | tree

Wolfgang Denk [Wed, 9 Nov 2011 09:28:59 +0000 (09:28 +0000)]

board/evb64260/sdram_init.c: Fix GCC 4.6 build warnings

Fix:
sdram_init.c: In function 'setup_sdram_common':
sdram_init.c:333:49: warning: variable 'ecc' set but not used
[-Wunused-but-set-variable]
sdram_init.c: In function 'setup_sdram':
sdram_init.c:410:13: warning: variable 'check' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>

commit | commitdiff | tree

Wolfgang Denk [Wed, 9 Nov 2011 09:28:58 +0000 (09:28 +0000)]

board/evb64260/eth.c: Fix GCC 4.6 build warning

Fix:
eth.c: In function 'gt6426x_handle_SMI':
eth.c:130:15: warning: variable 'psr' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>

commit | commitdiff | tree

Wolfgang Denk [Wed, 9 Nov 2011 09:28:57 +0000 (09:28 +0000)]

board/evb64260/evb64260.c: Fix GC 4.6 build warning

Fix:
evb64260.c: In function 'debug_led':
evb64260.c:363:6: warning: variable 'dummy' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>

commit | commitdiff | tree

Wolfgang Denk [Wed, 9 Nov 2011 09:28:56 +0000 (09:28 +0000)]

board/evb64260/i2c.c: Fix GCC 4.6 build warnings

Fix:
i2c.c: In function 'i2c_init':
i2c.c:23:15: warning: variable 'actualFreq' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Eran Man <eran@nbase.co.il>
Acked-by: Heiko Schocher <hs@denx.de>

commit | commitdiff | tree

Wolfgang Denk [Wed, 9 Nov 2011 09:28:55 +0000 (09:28 +0000)]

board/evb64260/i2c.c: Coding Style cleanup

Make checkpatch-clean

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Eran Man <eran@nbase.co.il>

commit | commitdiff | tree

Wolfgang Denk [Wed, 9 Nov 2011 09:28:54 +0000 (09:28 +0000)]

drivers/block/sym53c8xx.c: Fix GCC 4.6 build warning

Fix:
sym53c8xx.c: In function 'scsi_write_dsp':
sym53c8xx.c:456:16: warning: variable 'val' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 06:21:10 +0000 (06:21 +0000)]

drivers/block/sata_sil3114.c: Fix GCC 4.6 build warning

Fix:

sata_sil3114.c: In function 'scan_sata':
sata_sil3114.c:793:7: warning: array subscript is above array bounds [-Warray-bounds]
sata_sil3114.c:794:7: warning: array subscript is above array bounds [-Warray-bounds]
sata_sil3114.c:795:39: warning: array subscript is above array bounds [-Warray-bounds]
sata_sil3114.c:795:7: warning: array subscript is above array bounds [-Warray-bounds]
sata_sil3114.c:797:7: warning: array subscript is above array bounds [-Warray-bounds]
sata_sil3114.c:800:7: warning: array subscript is above array bounds [-Warray-bounds]
sata_sil3114.c:801:7: warning: array subscript is above array bounds [-Warray-bounds]
sata_sil3114.c:802:39: warning: array subscript is above array bounds [-Warray-bounds]
sata_sil3114.c:802:7: warning: array subscript is above array bounds [-Warray-bounds]
sata_sil3114.c:804:7: warning: array subscript is above array bounds [-Warray-bounds]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 06:21:09 +0000 (06:21 +0000)]

drivers/bios_emulator/x86emu/ops.c: Fix GCC 4.6 build warning

Fix:

x86emu/ops.c: In function 'x86emuOp_int3':
x86emu/ops.c:3521:9: warning: variable 'tmp' set but not used [-Wunused-but-set-variable]
x86emu/ops.c: In function 'x86emuOp_int_IMM':
x86emu/ops.c:3549:9: warning: variable 'tmp' set but not used [-Wunused-but-set-variable]
x86emu/ops.c: In function 'x86emuOp_into':
x86emu/ops.c:3579:9: warning: variable 'tmp' set but not used [-Wunused-but-set-variable]
x86emu/ops.c: In function 'x86emuOp_aad':
x86emu/ops.c:3993:8: warning: variable 'a' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 06:21:08 +0000 (06:21 +0000)]

drivers/block/ahci.c: Fix GCC 4.6 build warning

Fix:

ahci.c: In function 'ata_scsiop_read10':
ahci.c:564:6: warning: variable 'lba' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Heiko Schocher [Sun, 30 Oct 2011 19:15:53 +0000 (19:15 +0000)]

davinci, mmc: fix gcc 4.6 build warnings

Fix:
davinci_mmc.c: In function 'dmmc_wait_fifo_status':
davinci_mmc.c:72:7: warning: variable 'mmcstatus1' set but not used [-Wunused-but-set-variable]
davinci_mmc.c: In function 'dmmc_busy_wait':
davinci_mmc.c:89:7: warning: variable 'mmcstatus1' set but not used [-Wunused-but-set-variable]

Delete the unused variable.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>

commit | commitdiff | tree

Stefano Babic [Sun, 6 Nov 2011 00:42:39 +0000 (00:42 +0000)]

FPGA: drivers/fpga/ivm_core.c: GCC4.6 fix build warnings

Fix:
ivm_core.c: In function 'ispVMLCOUNT':
ivm_core.c:2105:16: warning: unused variable 'usByte'

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Wolfgang Denk <wd@denx.de>

commit | commitdiff | tree

Wolfgang Denk [Wed, 16 Nov 2011 19:44:06 +0000 (20:44 +0100)]

Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
  api: export LCD device to external apps
  font: split font data from video_font.h
  tools: logo: split bmp arrays from bmp_logo.h
  lcd: add clear and draw bitmap declaration
  VIDEO: mx3fb: GCC4.6 fix build warnings
  Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bug

commit | commitdiff | tree

Wolfgang Denk [Wed, 16 Nov 2011 19:44:03 +0000 (20:44 +0100)]

Merge branch 'master' of git://git.denx.de/u-boot-video

* 'master' of git://git.denx.de/u-boot-video:
  api: export LCD device to external apps
  font: split font data from video_font.h
  tools: logo: split bmp arrays from bmp_logo.h
  lcd: add clear and draw bitmap declaration
  VIDEO: mx3fb: GCC4.6 fix build warnings
  Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bug

commit | commitdiff | tree

Wolfgang Denk [Wed, 16 Nov 2011 19:24:51 +0000 (20:24 +0100)]

Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
  arm, davinci: add DAVINCI_MMC_CLKID
  arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
  arm, davinci: da850/dm365 lowlevel cleanup
  omap5: Add omap5_evm board build support.
  omap4/5: Add support for booting with CH.
  omap5: emif: Add emif/ddr configurations required for omap5 evm
  omap5: clocks: Add clocks support for omap5 platform.
  omap5: Add minimal support for omap5430.
  omap: Checkpatch fixes
  omap4: make omap4 code common for future reuse
  GCC4.6: Squash warnings in onenand_base.c
  GCC4.6: Fix common/usb.c on xscale
  OneNAND: Add simple OneNAND SPL
  PXA: vpac270: Enable the new generic MMC driver
  PXA: Cleanup serial_pxa
  PXA: Drop csb226 and innokom boards (unmaintained)
  m28evk: Fix comment about the number of RAM banks
  mx31: Fix checkpatch warnings in generic.c
  mx31: Use proper IO accessor for GPR register
  mx31: Remove duplicate definition for GPR register
  qong: Use generic function for configuring GPR register
  M28EVK: Enable USB HOST support
  iMX28: Add USB HOST driver
  iMX28: Add USB and USB PHY register definitions
  M28: Add memory detection into SPL
  iMX28: Fix ARM vector handling
  M28: Add doc/README.m28 documentation
  M28: Add MMC SPL
  iMX28: Add support for DENX M28EVK board
  iMX28: Add u-boot.sb target to Makefile
  iMX28: Add image header generator tool
  iMX28: Add driver for internal RTC
  iMX28: Add GPMI NAND driver
  iMX28: Add APBH DMA driver
  iMX28: Add SPI driver
  iMX28: Add GPIO control
  iMX28: Add I2C bus driver
  iMX28: Add PINMUX control
  FEC: Add support for iMX28 quirks
  iMX28: Add SSP MMC driver
  iMX28: Initial support for iMX28 CPU
  MX25: zmx25: GCC4.6 fix build warnings
  da850: add new config file for AM18xx
  BeagleBoard: config: Switch to ttyO2
  OMAP3: Change omap3_evm maintainer
  devkit8000: Fix NAND SPL on boards with 256MB NAND
  integrator: enable Vpp and disable flash protection
  integrator: add system controller header
  integrator: make flash writeable on boot
  integrator: use io-accessors for board init
  integrator: move text offset to config
  integrator: pass configs for core modules
  ARM: remove superfluous setting of arch_number in board specific code.
  SPL: Allow ARM926EJS to avoid compiling in the CPU support code
  integrator: do not test first part of the memory
  arm: a320: fix broken timer
  ARM: define CONFIG_MACH_TYPE for all ronetix boards
  dm646x: pass board revision info to kernel
  dm646x: add new configuration for dm6467T
  arm, davinci: Fix setting of the SDRAM configuration register
  arm, davinci: Remove the duplication of LPSC functions
  arm, davinci: Rename AM1808 lowlevel functions to DA850
  da8xxevm: fix build error
  ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE

commit | commitdiff | tree

Wolfgang Denk [Wed, 16 Nov 2011 19:24:41 +0000 (20:24 +0100)]

Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  arm, davinci: add DAVINCI_MMC_CLKID
  arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
  arm, davinci: da850/dm365 lowlevel cleanup
  omap5: Add omap5_evm board build support.
  omap4/5: Add support for booting with CH.
  omap5: emif: Add emif/ddr configurations required for omap5 evm
  omap5: clocks: Add clocks support for omap5 platform.
  omap5: Add minimal support for omap5430.
  omap: Checkpatch fixes
  omap4: make omap4 code common for future reuse
  GCC4.6: Squash warnings in onenand_base.c
  GCC4.6: Fix common/usb.c on xscale
  OneNAND: Add simple OneNAND SPL
  PXA: vpac270: Enable the new generic MMC driver
  PXA: Cleanup serial_pxa
  PXA: Drop csb226 and innokom boards (unmaintained)
  m28evk: Fix comment about the number of RAM banks
  mx31: Fix checkpatch warnings in generic.c
  mx31: Use proper IO accessor for GPR register
  mx31: Remove duplicate definition for GPR register
  qong: Use generic function for configuring GPR register
  M28EVK: Enable USB HOST support
  iMX28: Add USB HOST driver
  iMX28: Add USB and USB PHY register definitions
  M28: Add memory detection into SPL
  iMX28: Fix ARM vector handling
  M28: Add doc/README.m28 documentation
  M28: Add MMC SPL
  iMX28: Add support for DENX M28EVK board
  iMX28: Add u-boot.sb target to Makefile
  iMX28: Add image header generator tool
  iMX28: Add driver for internal RTC
  iMX28: Add GPMI NAND driver
  iMX28: Add APBH DMA driver
  iMX28: Add SPI driver
  iMX28: Add GPIO control
  iMX28: Add I2C bus driver
  iMX28: Add PINMUX control
  FEC: Add support for iMX28 quirks
  iMX28: Add SSP MMC driver
  iMX28: Initial support for iMX28 CPU
  MX25: zmx25: GCC4.6 fix build warnings
  da850: add new config file for AM18xx
  BeagleBoard: config: Switch to ttyO2
  OMAP3: Change omap3_evm maintainer
  devkit8000: Fix NAND SPL on boards with 256MB NAND
  integrator: enable Vpp and disable flash protection
  integrator: add system controller header
  integrator: make flash writeable on boot
  integrator: use io-accessors for board init
  integrator: move text offset to config
  integrator: pass configs for core modules
  ARM: remove superfluous setting of arch_number in board specific code.
  SPL: Allow ARM926EJS to avoid compiling in the CPU support code
  integrator: do not test first part of the memory
  arm: a320: fix broken timer
  ARM: define CONFIG_MACH_TYPE for all ronetix boards
  dm646x: pass board revision info to kernel
  dm646x: add new configuration for dm6467T
  arm, davinci: Fix setting of the SDRAM configuration register
  arm, davinci: Remove the duplication of LPSC functions
  arm, davinci: Rename AM1808 lowlevel functions to DA850
  da8xxevm: fix build error
  ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE

commit | commitdiff | tree

Wolfgang Denk [Wed, 16 Nov 2011 19:18:05 +0000 (20:18 +0100)]

Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
Fix constness of the fdt void pointer in fdt_getprop_u32_default
Add some missing endian conversions in fdt_support.c

commit | commitdiff | tree

Wolfgang Denk [Wed, 16 Nov 2011 19:17:56 +0000 (20:17 +0100)]

Merge branch 'master' of git://git.denx.de/u-boot-fdt

* 'master' of git://git.denx.de/u-boot-fdt:
Fix constness of the fdt void pointer in fdt_getprop_u32_default
Add some missing endian conversions in fdt_support.c

commit | commitdiff | tree

Wolfgang Denk [Wed, 16 Nov 2011 19:14:52 +0000 (20:14 +0100)]

Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
  powerpc/85xx: Fix builds of P1020/P2020RDB-PC_36BIT_NAND
  arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c: Fix GCC 4.6 build warning
  arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c: Fix GCC 4.6 build warning
  arch/powerpc/cpu/mpc8xxx/ddr/options.c: Fix GCC 4.6 build warning
  drivers/qe/uec.c: Fix GCC 4.6 build warning
  drivers/usb/host/ehci-fsl.c: Fix GCC 4.6 build warning
  drivers/net/fm/fm.c: Fix GCC 4.6 build warning
  board/sbc8560/sbc8560.c: Fix GCC 4.6 build warning
  board/sbc8548/sbc8548.c: Fix GCC 4.6 build warning
  board/freescale/mpc8569mds/mpc8569mds.c: Fix GCC 4.6 build warning
  board/freescale/mpc8568mds/mpc8568mds.c: Fix GCC 4.6 build warning
  board/freescale/mpc8548cds/mpc8548cds.c: Fix GCC 4.6 build warning
  board/freescale/common/pixis.c: Fix GCC 4.6 build warning
  board/freescale/common/cds_pci_ft.c: Fix GCC 4.6 build warning
  arch/powerpc/cpu/mpc8xxx/fsl_lbc.c: Fix GCC 4.6 build warning
  arch/powerpc/cpu/mpc85xx/tlb.c: Fix GCC 4.6 build warning
  arch/powerpc/cpu/mpc85xx/cpu_init.c: Fix GCC 4.6 build warning
  phylib: Enable AR8021 phy support
  powerpc/85xx: Set max alloc length to 10MB on P1022DS
  powerpc/mpc85xx: Set SYSCLK to the required frequency
  powerpc/85xx: Fix NAND SPL support
  powerpc/85xx: Fix MPC8572DS NAND build
  fsl_ifc: Fixed a bug in the erratum handling code for IFC_A003399
  powerpc/85xx: Add support for Book-E MMU Arch v2.0
  powerpc/85xx: Make inclusion of USB device fixup conditional
  powerpc/85xx: Fix warning for USB device-fixup
  powerpc/85xx: resize the boot page TLB before relocating CCSR
  powerpc/85xx: verify the current address of CCSR before relocating it
  powerpc/85xx: add some missing sync instructions in the CCSR relocation code
  powerpc/85xx: fix some comments in the CCSR relocation code
  powerpc/85xx: fix definition of MAS register macros
  powerpc/mpc8548cds: Fix network initialization
  powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129
  powerpc/QorIQ: fix network frame manager TBI PHY address settings

commit | commitdiff | tree

Wolfgang Denk [Wed, 16 Nov 2011 19:06:21 +0000 (20:06 +0100)]

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

* 'master' of git://git.denx.de/u-boot-mpc85xx:
  powerpc/85xx: Fix builds of P1020/P2020RDB-PC_36BIT_NAND
  arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c: Fix GCC 4.6 build warning
  arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c: Fix GCC 4.6 build warning
  arch/powerpc/cpu/mpc8xxx/ddr/options.c: Fix GCC 4.6 build warning
  drivers/qe/uec.c: Fix GCC 4.6 build warning
  drivers/usb/host/ehci-fsl.c: Fix GCC 4.6 build warning
  drivers/net/fm/fm.c: Fix GCC 4.6 build warning
  board/sbc8560/sbc8560.c: Fix GCC 4.6 build warning
  board/sbc8548/sbc8548.c: Fix GCC 4.6 build warning
  board/freescale/mpc8569mds/mpc8569mds.c: Fix GCC 4.6 build warning
  board/freescale/mpc8568mds/mpc8568mds.c: Fix GCC 4.6 build warning
  board/freescale/mpc8548cds/mpc8548cds.c: Fix GCC 4.6 build warning
  board/freescale/common/pixis.c: Fix GCC 4.6 build warning
  board/freescale/common/cds_pci_ft.c: Fix GCC 4.6 build warning
  arch/powerpc/cpu/mpc8xxx/fsl_lbc.c: Fix GCC 4.6 build warning
  arch/powerpc/cpu/mpc85xx/tlb.c: Fix GCC 4.6 build warning
  arch/powerpc/cpu/mpc85xx/cpu_init.c: Fix GCC 4.6 build warning
  phylib: Enable AR8021 phy support
  powerpc/85xx: Set max alloc length to 10MB on P1022DS
  powerpc/mpc85xx: Set SYSCLK to the required frequency
  powerpc/85xx: Fix NAND SPL support
  powerpc/85xx: Fix MPC8572DS NAND build
  fsl_ifc: Fixed a bug in the erratum handling code for IFC_A003399
  powerpc/85xx: Add support for Book-E MMU Arch v2.0
  powerpc/85xx: Make inclusion of USB device fixup conditional
  powerpc/85xx: Fix warning for USB device-fixup
  powerpc/85xx: resize the boot page TLB before relocating CCSR
  powerpc/85xx: verify the current address of CCSR before relocating it
  powerpc/85xx: add some missing sync instructions in the CCSR relocation code
  powerpc/85xx: fix some comments in the CCSR relocation code
  powerpc/85xx: fix definition of MAS register macros
  powerpc/mpc8548cds: Fix network initialization
  powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129
  powerpc/QorIQ: fix network frame manager TBI PHY address settings

commit | commitdiff | tree

Wolfgang Denk [Wed, 16 Nov 2011 19:00:32 +0000 (20:00 +0100)]

Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
  adp-ag101p: add product into MAINTAINERS list
  adp-ag101p: Add SoC and board support of ag101p
  nds32: fix data section of linker script
  dwcddr21mctl: Synopsys DWC DDR2/1 Memory Controller
  andes_pcu.h: header file of andes_pcu power control unit

commit | commitdiff | tree

Wolfgang Denk [Wed, 16 Nov 2011 19:00:27 +0000 (20:00 +0100)]

Merge branch 'master' of git://git.denx.de/u-boot-nds32

* 'master' of git://git.denx.de/u-boot-nds32:
  adp-ag101p: add product into MAINTAINERS list
  adp-ag101p: Add SoC and board support of ag101p
  nds32: fix data section of linker script
  dwcddr21mctl: Synopsys DWC DDR2/1 Memory Controller
  andes_pcu.h: header file of andes_pcu power control unit

commit | commitdiff | tree

Wolfgang Denk [Wed, 16 Nov 2011 18:59:02 +0000 (19:59 +0100)]

Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
fsl_i2c: Fix compile warning

commit | commitdiff | tree

Wolfgang Denk [Wed, 16 Nov 2011 18:58:52 +0000 (19:58 +0100)]

Merge branch 'master' of git://git.denx.de/u-boot-i2c

* 'master' of git://git.denx.de/u-boot-i2c:
fsl_i2c: Fix compile warning

commit | commitdiff | tree

Wolfgang Denk [Wed, 16 Nov 2011 18:53:37 +0000 (19:53 +0100)]

Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
  Tegra2: mmc: Factor out mmc_wait_inhibit functionality
  Tegra2: mmc: Add data transfer completion timeout
  Tegra2: mmc: Support DMA restarts at buffer boundaries
  Tegra2: mmc: define register field values in tegra2_mmc.h
  MMC: PL180: Fix infinite loop with VExpress extended fifo implementation

commit | commitdiff | tree

Che-Liang Chiou [Thu, 20 Oct 2011 23:04:22 +0000 (23:04 +0000)]

api: export LCD device to external apps

This patch exports LCD info-query and bitmap-rendering functions to
external apps.

This patch is tested on a Seaboard. Because the LCD driver is not yet
upstreamed, the test was done in a local downstream repo.

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>

commit | commitdiff | tree

Che-Liang Chiou [Fri, 21 Oct 2011 09:04:21 +0000 (17:04 +0800)]

font: split font data from video_font.h

While video_font.h is useful even without referencing the font data, it
is not possible to be included multiple times because it defines font
data array right in the header.

This patch splits the font data array into video_font_data.h and so now
video_font.h can be included multiple times. This at least solves the
code duplication in board/mcc200/lcd.c.

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>

commit | commitdiff | tree

Che-Liang Chiou [Thu, 20 Oct 2011 23:04:20 +0000 (23:04 +0000)]

tools: logo: split bmp arrays from bmp_logo.h

The generated header bmp_logo.h is useful even outside common/lcd.c for
the logo dimension. However, the problem is, the generated bmp_logo.h
cannot be included multiple times because bmp_logo_palette[] and
bmp_logo_bitmap[] are defined in the bmp_logo.h.

This patch fixes this by defining these arrays in another header
bmp_logo_data.h and in bmp_logo.h only declaring these arrays.

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit | commitdiff | tree

Che-Liang Chiou [Thu, 20 Oct 2011 23:07:03 +0000 (23:07 +0000)]

lcd: add clear and draw bitmap declaration

The functions for clearing and drawing bitmaps on the screen were not
exposed publicly and are made public in this patch in preparation for
implementing the display interface of api_public.h.

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit | commitdiff | tree

Heiko Schocher [Tue, 15 Nov 2011 15:03:00 +0000 (10:03 -0500)]

arm, davinci: add DAVINCI_MMC_CLKID

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit | commitdiff | tree

Heiko Schocher [Tue, 15 Nov 2011 15:00:04 +0000 (10:00 -0500)]

arm, davinci_emac: fix driver bug if more then 3 PHYs are detected

since commits:
davinci: emac: add support for more than 1 PHYs
062fe7d332c28ede25626f448681e43d76bb312e

davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
fb1d6332b5430b90a8fa8ebab709f33a60e9f816

I get following warning on the enbw_cmc board:

Err:   serial
Net:    5 ETH PHY detected
miiphy_register: non unique device name 'KSZ8873 @ 0x01'
DaVinci-EMAC
Hit any key to stop autoboot:  0

Also I see some debug printfs:

=> run load
+ emac_close
+ emac_ch_teardown
- emac_ch_teardown
+ emac_ch_teardown
- emac_ch_teardown
- emac_close
+ emac_open
- emac_open
Using DaVinci-EMAC device

reason is 062fe7d332c28ede25626f448681e43d76bb312e new define MAX_PHY.
This is set to 3! I get on this board 5 active phys, so
this leads in wrong memory writes ...

so I changed:

- define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT to set
  the MAX_PHY value, add a description in README
  for the new CONFIG_SYS option.
- print an error message if more then MAX_PHYs are
  detected.
- fill the active_phy_addr array in a for loop with
  0xff
- changed printf() in debug_emac()

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Manjunath Hadli <manjunath.hadli@ti.com>
Cc: Prabhakar Lad <prabhakar.csengg@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Tom Rini <tom.rini@gmail.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit | commitdiff | tree

Heiko Schocher [Tue, 15 Nov 2011 15:00:02 +0000 (10:00 -0500)]

arm, davinci: da850/dm365 lowlevel cleanup

- Cleanup a lot of fix values, and use defines instead.
- Also make some values configurable through the board config
file.
- delete the NAND_SPL code for da850, as it is not used actually
- remove the asm code

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Wolfgang Denk <hs@denx.de>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Tom Rini <tom.rini@gmail.com>
Cc: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit | commitdiff | tree

Sricharan [Tue, 15 Nov 2011 14:50:06 +0000 (09:50 -0500)]

omap5: Add omap5_evm board build support.

This patch adds the build support for the
omap5_evm board.

Signed-off-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit | commitdiff | tree

Sricharan [Tue, 15 Nov 2011 14:50:03 +0000 (09:50 -0500)]

omap4/5: Add support for booting with CH.

Configuration header(CH) is 512 byte header attached to an OMAP
boot image that will help ROM code to initialize clocks, SDRAM
etc and copy U-Boot directly into SDRAM. CH can help us in
by-passing SPL and directly boot U-boot, hence it's an alternative
for SPL. However, we intend to support both CH and SPL for OMAP4/5.

Initialization done through CH is limited and is not equivalent
to that done by SPL. So U-Boot has to distinguish between the
two cases and handle them accordingly. This patch takes care
of doing this.

Signed-off-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit | commitdiff | tree

Sricharan [Tue, 15 Nov 2011 14:50:00 +0000 (09:50 -0500)]

omap5: emif: Add emif/ddr configurations required for omap5 evm

Add the emif configurations required for omap5 soc.Add the
correct ddr part configurations required for omap5 evm board.
EDB8164B3PH from ELPIDA is the part used on the board.

Also changes are done to retain some part of the code
common for OMAP4/5 and keep only the remaining in the Soc
specific directories.

Signed-off-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit | commitdiff | tree

Sricharan [Tue, 15 Nov 2011 14:49:58 +0000 (09:49 -0500)]

omap5: clocks: Add clocks support for omap5 platform.

Adding the correct configurations required for
dplls, clocks, for omap5 Soc.

Also changes are done to retain some part of the code common
for OMAP4/5 and move only the remaining to the Soc specific
directories.

Signed-off-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit | commitdiff | tree

Sricharan [Tue, 15 Nov 2011 14:49:55 +0000 (09:49 -0500)]

omap5: Add minimal support for omap5430.

This patch adds the minimal support for OMAP5. The platform and machine
specific headers and sources updated for OMAP5430.

OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP architecture.
It's a dual core SOC with GIC used for interrupt handling and SCU for cache
coherency.

Also moved some part of code from the basic platform support that can be made
common for OMAP4/5. Rest is kept out seperately. The same approach is followed
for clocks and emif support in the subsequent patches.

Signed-off-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit | commitdiff | tree

Sricharan [Tue, 15 Nov 2011 14:49:53 +0000 (09:49 -0500)]

omap: Checkpatch fixes

Fixing them here so that when the files are reused in
subsequent patches for omap5, avoids new checkpatch
warnings.

Signed-off-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit | commitdiff | tree

Sricharan [Tue, 15 Nov 2011 14:49:50 +0000 (09:49 -0500)]

omap4: make omap4 code common for future reuse

Much of omap4 soc support code can be reused for omap5.
Move them to the omap-common directory to facilitate
this.

Signed-off-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit | commitdiff | tree

Marek Vasut [Sat, 5 Nov 2011 23:59:52 +0000 (00:59 +0100)]

GCC4.6: Squash warnings in onenand_base.c

onenand_base.c: In function ‘onenand_do_lock_cmd’:
onenand_base.c:1946:6: warning: variable ‘wp_status_mask’ set but not used
[-Wunused-but-set-variable]
onenand_base.c: In function ‘onenand_check_maf’:
onenand_base.c:2229:8: warning: variable ‘name’ set but not used
[-Wunused-but-set-variable]
onenand_base.c: In function ‘flexonenand_get_boundary’:
onenand_base.c:2258:6: warning: variable ‘ret’ set but not used
[-Wunused-but-set-variable]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>

commit | commitdiff | tree

Marek Vasut [Sat, 5 Nov 2011 22:35:12 +0000 (23:35 +0100)]

GCC4.6: Fix common/usb.c on xscale

The problem was that the code, when the function was compiled with -Os, was
misgenerated. As in the function description, this is likely another
manifestation of the bug in GCC.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>

commit | commitdiff | tree

Marek Vasut [Mon, 31 Oct 2011 13:14:15 +0000 (14:14 +0100)]

OneNAND: Add simple OneNAND SPL

This introduces small OneNAND loader, fitting into 1kB of space (smallest
possible OneNAND RAM size). Some devices equipped with such crappy chips will
use this.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Scott Wood <scottwood@freescale.com>
V2: Introduce spl_onenand_load_image() to load data from OneNAND in SPL
V3: Cleanup, align with nand_spl. Skip whole blocks.

commit | commitdiff | tree

Marek Vasut [Sun, 28 Aug 2011 04:30:40 +0000 (06:30 +0200)]

PXA: vpac270: Enable the new generic MMC driver

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

commit | commitdiff | tree

Marek Vasut [Sun, 28 Aug 2011 01:35:13 +0000 (03:35 +0200)]

PXA: Cleanup serial_pxa

* Cleanup register definitions by introducing new regs-uart.h, compliant with
rest of U-Boot.
* Remove old register definitions from pxa-regs.h
* Convert serial_pxa to new regs-uart.h
* Cleanup serial_pxa

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

commit | commitdiff | tree

Marek Vasut [Thu, 3 Nov 2011 00:02:47 +0000 (01:02 +0100)]

PXA: Drop csb226 and innokom boards (unmaintained)

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Robert Schwebel <robert@schwebel.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>

commit | commitdiff | tree

Gabe Black [Tue, 8 Nov 2011 09:09:44 +0000 (01:09 -0800)]

Fix constness of the fdt void pointer in fdt_getprop_u32_default

The function fdt_getprop_u32_default doesn't modify the fdt, so it can use a
const void * for its fdt argument.

Signed-off-by: Gabe Black <gabeblack@chromium.org>

commit | commitdiff | tree

Gabe Black [Tue, 8 Nov 2011 09:05:32 +0000 (01:05 -0800)]

Add some missing endian conversions in fdt_support.c

Some functions in fdt_support.c use fdt_getprop to read 32 bit values out of
the device tree, but then use them directly without doing any endian
conversion. Because they check for a value that doesn't actually appear in
practice, the functions continued to work even though they're incorrect.
This change adds the missing conversions.

Signed-off-by: Gabe Black <gabeblack@chromium.org>

commit | commitdiff | tree

Anton staaf [Thu, 10 Nov 2011 11:56:52 +0000 (11:56 +0000)]

Tegra2: mmc: Factor out mmc_wait_inhibit functionality

This is a well encapsulated section of mmc_send_cmd, by moving
it to it's own function it increases the readability of mmc_send_cmd.

Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>

commit | commitdiff | tree

Anton staaf [Thu, 10 Nov 2011 11:56:51 +0000 (11:56 +0000)]

Tegra2: mmc: Add data transfer completion timeout

Currently when no expected completion condition occures in the
mmc_send_cmd while loop that is waiting for a data transfer to
complete the MMC driver just hangs.

This patch adds an arbitrary 2 second timeout. If nothing we
recognize occures within 2 seconds some diagnostic information
is printed and we fail out.

Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>

commit | commitdiff | tree

Anton staaf [Thu, 10 Nov 2011 11:56:50 +0000 (11:56 +0000)]

Tegra2: mmc: Support DMA restarts at buffer boundaries

Currently if a DMA buffer straddles a buffer alignment boundary
(512KiB) then the DMA engine will pause and generate a DMA
interrupt.  Since the DMA interrupt is not enabled it will hang
the MMC driver.

This patch adds support for restarting the DMA transfer.  The
SYSTEM_ADDRESS register contains the next address that would have
been read/written when a boundary is hit.  So we can read that
and write it back.  The write triggers the resumption of the
transfer.

Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>

commit | commitdiff | tree

Anton staaf [Thu, 10 Nov 2011 11:56:49 +0000 (11:56 +0000)]

Tegra2: mmc: define register field values in tegra2_mmc.h

This moves the magic numbers sprinkled about the MMC driver
to a single location in the header file and gives them
meaningful names.

Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>

commit | commitdiff | tree

Kumar Gala [Fri, 11 Nov 2011 14:14:53 +0000 (08:14 -0600)]

powerpc/85xx: Fix builds of P1020/P2020RDB-PC_36BIT_NAND

Size grew a bit so nand-spl didn't fit in 4k, reduce done by removing
LAW entries not needed during SPL phase.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 16:05:10 +0000 (10:05 -0600)]

arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c: Fix GCC 4.6 build warning

Fix:

ctrl_regs.c: In function 'set_ddr_sdram_cfg_2':
ctrl_regs.c:641:15: warning: variable 'rcw_en' set but not used [-Wunused-but-set-variable]
ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
ctrl_regs.c:951:31: warning: array subscript is above array bounds [-Warray-bounds]
ctrl_regs.c:752:34: warning: array subscript is above array bounds [-Warray-bounds]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 16:05:01 +0000 (10:05 -0600)]

arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c: Fix GCC 4.6 build warning

Fix:

fsl_corenet_serdes.c: In function 'fsl_serdes_init':
fsl_corenet_serdes.c:511:8: warning: variable 'buf' set but not used [-Wunused-but-set-variable]
fsl_corenet_serdes.c:498:18: warning: variable 'lane_prtcl' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 16:05:21 +0000 (10:05 -0600)]

arch/powerpc/cpu/mpc8xxx/ddr/options.c: Fix GCC 4.6 build warning

Fix:

options.c: In function 'populate_memctl_options':
options.c:486:28: warning: variable 'pdodt' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 16:04:33 +0000 (10:04 -0600)]

drivers/qe/uec.c: Fix GCC 4.6 build warning

uec.c: In function 'uec_stop':
uec.c:267:22: warning: variable 'uccf' set but not used [-Wunused-but-set-variable]
uec.c: In function 'uec_set_mac_if_mode':
uec.c:328:15: warning: variable 'uec_info' set but not used [-Wunused-but-set-variable]
uec.c: In function 'adjust_link':
uec.c:519:11: warning: variable 'uec_regs' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 16:04:15 +0000 (10:04 -0600)]

drivers/usb/host/ehci-fsl.c: Fix GCC 4.6 build warning

Fix:

ehci-fsl.c: In function 'ehci_hcd_init':
ehci-fsl.c:43:7: warning: variable 'usb_phy' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 16:03:55 +0000 (10:03 -0600)]

drivers/net/fm/fm.c: Fix GCC 4.6 build warning

Fix:

fm.c: In function 'fm_init_common':
fm.c:398:6: warning: variable 'n' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 16:03:43 +0000 (10:03 -0600)]

board/sbc8560/sbc8560.c: Fix GCC 4.6 build warning

Fix:

sbc8560.c: In function 'ft_board_setup':
sbc8560.c:351:12: warning: variable 'tmp' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 16:03:26 +0000 (10:03 -0600)]

board/sbc8548/sbc8548.c: Fix GCC 4.6 build warning

Fix:

sbc8548.c: In function 'local_bus_init':
sbc8548.c:80:7: warning: variable 'lbc_hz' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 16:03:12 +0000 (10:03 -0600)]

board/freescale/mpc8569mds/mpc8569mds.c: Fix GCC 4.6 build warning

mpc8569mds.c: In function 'local_bus_init':
mpc8569mds.c:306:7: warning: variable 'lbc_hz' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 16:03:01 +0000 (10:03 -0600)]

board/freescale/mpc8568mds/mpc8568mds.c: Fix GCC 4.6 build warning

Fix:

mpc8568mds.c: In function 'local_bus_init':
mpc8568mds.c:150:7: warning: variable 'lbc_hz' set but not used [-Wunused-but-set-variable]
mpc8568mds.c: In function 'pib_init':
mpc8568mds.c:271:11: warning: variable 'orig_i2c_bus' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 16:02:40 +0000 (10:02 -0600)]

board/freescale/mpc8548cds/mpc8548cds.c: Fix GCC 4.6 build warning

Fix:

mpc8548cds.c: In function 'local_bus_init':
mpc8548cds.c:87:7: warning: variable 'lbc_hz' set but not used [-Wunused-but-set-variable]
mpc8548cds.c: In function 'lbc_sdram_init':
mpc8548cds.c:121:7: warning: variable 'cpu_board_rev' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 16:02:11 +0000 (10:02 -0600)]

board/freescale/common/pixis.c: Fix GCC 4.6 build warning

Fix:

pixis.c: In function 'strfractoint':
pixis.c:383:6: warning: variable 'intarr_len' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 16:01:06 +0000 (10:01 -0600)]

board/freescale/common/cds_pci_ft.c: Fix GCC 4.6 build warning

Fix:

cds_pci_ft.c: In function 'cds_pci_fixup':
cds_pci_ft.c:31:12: warning: variable 'tmp' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 16:00:23 +0000 (10:00 -0600)]

arch/powerpc/cpu/mpc8xxx/fsl_lbc.c: Fix GCC 4.6 build warning

Fix:

fsl_lbc.c: In function 'upmconfig':
fsl_lbc.c:110:9: warning: variable 'mdr' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 15:59:32 +0000 (09:59 -0600)]

arch/powerpc/cpu/mpc85xx/tlb.c: Fix GCC 4.6 build warning

Fix:

tlb.c: In function 'disable_tlb':
tlb.c:175:34: warning: variable '_mas7' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Kumar Gala [Wed, 9 Nov 2011 15:56:41 +0000 (09:56 -0600)]

arch/powerpc/cpu/mpc85xx/cpu_init.c: Fix GCC 4.6 build warning

Fix:

cpu_init.c: In function 'cpu_init_r':
cpu_init.c:320:7: warning: variable 'l2srbar' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Xie Xiaobo [Fri, 11 Nov 2011 09:19:41 +0000 (17:19 +0800)]

phylib: Enable AR8021 phy support

Enable AR8021 as it used on Freescale boards: P1020RDB-PC, P1021RDB-PC,
P2020RDB-PC, P1020UTM-PC, and P1020MSBG-PC.

Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Jerry Huang [Wed, 2 Nov 2011 01:16:44 +0000 (09:16 +0800)]

powerpc/85xx: Set max alloc length to 10MB on P1022DS

In order to support 1920x01080 resolution, we must increase the alloc
length.

Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
CC: Anatolij Gustschin <agust@denx.de>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Jerry Huang [Thu, 3 Nov 2011 07:18:06 +0000 (15:18 +0800)]

powerpc/mpc85xx: Set SYSCLK to the required frequency

For ICS307-02, there is one general expression to generate SYSCLK:
CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD)

If we want the required frequency for SYSCLK, we must find one solution
to generate this frequency, this solution includes VDW, RDW and OD.
For OD, there are only eight option value: 10, 2, 8, 4, 5, 7, 3, 6.
For RDW, the range is 1 to 127.
For VDW, the range is 4 to 511.

First, we use one OD, RDW and required SYSCLK to calculate the VDW,
if VDW is in it's range, we will calculate the CLK1Frequency with
the OD, RDW and VDW calculated, and we will check this percent
(CLK1Frequency / required SYSCLK), and the precision is 1/1000.
if the percent is less than 1/1000, we think the CLK1Frequency is we want.
Otherwise, We will continue to calculate it with the next OD and RDW.

Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit | commitdiff | tree

Fabio Estevam [Thu, 10 Nov 2011 06:38:45 +0000 (06:38 +0000)]

m28evk: Fix comment about the number of RAM banks

m28evk has one bank of RAM.

Fix the comment.

Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>

commit | commitdiff | tree

Fabio Estevam [Wed, 9 Nov 2011 04:15:03 +0000 (04:15 +0000)]

mx31: Fix checkpatch warnings in generic.c

Fix checkpatch warnings in generic.c.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>

commit | commitdiff | tree

Fabio Estevam [Wed, 9 Nov 2011 04:15:02 +0000 (04:15 +0000)]

mx31: Use proper IO accessor for GPR register

Use proper IO accessor for GPR register.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>

commit | commitdiff | tree

Fabio Estevam [Wed, 9 Nov 2011 04:15:01 +0000 (04:15 +0000)]

mx31: Remove duplicate definition for GPR register

GPR register definition is already available at imx-regs.h, so remove the duplication.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>

commit | commitdiff | tree

Fabio Estevam [Wed, 9 Nov 2011 04:15:00 +0000 (04:15 +0000)]

qong: Use generic function for configuring GPR register

Use generic function for configuring GPR register.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>

commit | commitdiff | tree

Marek Vasut [Tue, 8 Nov 2011 23:18:27 +0000 (23:18 +0000)]

M28EVK: Enable USB HOST support

This enables the second port, aka. the port with the USB connector on the
M28EVK.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>

commit | commitdiff | tree

Marek Vasut [Tue, 8 Nov 2011 23:18:26 +0000 (23:18 +0000)]

iMX28: Add USB HOST driver

This driver supports both EHCI ports on the i.MX28 CPU.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>

commit | commitdiff | tree

Marek Vasut [Tue, 8 Nov 2011 23:18:25 +0000 (23:18 +0000)]

iMX28: Add USB and USB PHY register definitions

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>

commit | commitdiff | tree

Marek Vasut [Tue, 8 Nov 2011 23:18:24 +0000 (23:18 +0000)]

M28: Add memory detection into SPL

This code allows the DDR DRAM size to be detected at runtime. The RAM size is
stored into two scratch registers, from which it is then fetched in U-Boot.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>

commit | commitdiff | tree

Marek Vasut [Tue, 8 Nov 2011 23:18:23 +0000 (23:18 +0000)]

iMX28: Fix ARM vector handling

This patch introduces proper ARM vector handling for i.MX28 CPU. This issue
wasn't addressed because the interrupts weren't enabled on any ARMv5 core,
therefore the issue wasn't noticed earlier.

In previous implementation, the vectoring code used by i.MX28 CPU when an
exception happened was that of the SPL. With this change, the branch target when
an exception happens can be reconfigured by U-Boot.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>

commit | commitdiff | tree

Marek Vasut [Tue, 8 Nov 2011 23:18:22 +0000 (23:18 +0000)]

M28: Add doc/README.m28 documentation

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>

commit | commitdiff | tree

Marek Vasut [Tue, 8 Nov 2011 23:18:21 +0000 (23:18 +0000)]

M28: Add MMC SPL

This patch adds SPL code for the M28 board.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>

commit | commitdiff | tree

Marek Vasut [Tue, 8 Nov 2011 23:18:20 +0000 (23:18 +0000)]

iMX28: Add support for DENX M28EVK board

This contains support for the following components:
- DUART
- MMC
- Both FEC interfaces
- NAND
- I2C (RTC, EEPROM)
- SPI (FLASH)

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>

commit | commitdiff | tree

Marek Vasut [Tue, 8 Nov 2011 23:18:19 +0000 (23:18 +0000)]

iMX28: Add u-boot.sb target to Makefile

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>

commit | commitdiff | tree

Marek Vasut [Tue, 8 Nov 2011 23:18:18 +0000 (23:18 +0000)]

iMX28: Add image header generator tool

This tool can now generate proper image for "BootStream" files.

NOTE: This tool now works only for NAND.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>

commit | commitdiff | tree

Marek Vasut [Tue, 8 Nov 2011 23:18:17 +0000 (23:18 +0000)]

iMX28: Add driver for internal RTC

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>

commit | commitdiff | tree

Marek Vasut [Tue, 8 Nov 2011 23:18:16 +0000 (23:18 +0000)]

iMX28: Add GPMI NAND driver

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>

Cloned from git://git.denx.de/u-boot.git