]> git.sur5r.net Git - u-boot/log
u-boot
11 years agopowerpc/ppc4xx: Add support for iocon fiber
Dirk Eibach [Fri, 9 Aug 2013 08:52:51 +0000 (10:52 +0200)]
powerpc/ppc4xx: Add support for iocon fiber

Add a new iocon flavor with fiber instead of copper connectivity.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Stefan Roese <sr@denx.de>
11 years agoMerge branch 'master' of git://88.191.163.10/u-boot-arm
Tom Rini [Sun, 18 Aug 2013 18:14:34 +0000 (14:14 -0400)]
Merge branch 'master' of git://88.191.163.10/u-boot-arm

Fixup an easy conflict over adding the clk_get prototype and USB_OTG
defines for am33xx having moved.

Conflicts:
arch/arm/include/asm/arch-am33xx/hardware.h

Signed-off-by: Tom Rini <trini@ti.com>
11 years agoMerge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Albert ARIBAUD [Sat, 17 Aug 2013 16:24:13 +0000 (18:24 +0200)]
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

11 years agogpio: pca953x: Use ARRAY_SIZE instead of reinventing it
Axel Lin [Sat, 22 Jun 2013 10:22:48 +0000 (18:22 +0800)]
gpio: pca953x: Use ARRAY_SIZE instead of reinventing it

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
11 years agotools/Makefile: Move _GNU_SOURCE to Makefile
York Sun [Tue, 30 Jul 2013 22:26:11 +0000 (15:26 -0700)]
tools/Makefile: Move _GNU_SOURCE to Makefile

Commit 669dfc2e adds libfdt_env.h to HOSTCPPFLAGS. It causes stdio.h
to be included before _GNU_SOURCE is defined in C files. On some old hosts
some prototypes are protected by #ifdef __USE_GNU, which is set when
_GNU_SOURCE is defined.

Signed-off-by: York Sun <yorksun@freescale.com>
Acked-by: Simon Glass <sjg@chromium.org>
11 years agoimage: Display FIT timestamp when booting
Simon Glass [Wed, 17 Jul 2013 03:10:01 +0000 (20:10 -0700)]
image: Display FIT timestamp when booting

The timestamp is shown in fit_print_contents() but for some reason not
in fit_image_print(). This seems to be an oversight, since it is the latter
which is used by bootm.

Add timestamp printing in this case.

(There is code duplication in these two function, for looking at in a future
patch).

Signed-off-by: Simon Glass <sjg@chromium.org>
11 years agobootm: fix conditional controlling call to fixup_silent_linux
Paul B. Henson [Sun, 4 Aug 2013 04:29:09 +0000 (21:29 -0700)]
bootm: fix conditional controlling call to fixup_silent_linux

This function is only defined if CONFIG_SILENT_CONSOLE is set and
CONFIG_SILENT_U_BOOT_ONLY is not set, the call to it should be based
on the same conditions.

Signed-off-by: Paul B. Henson <henson@acm.org>
Acked-by: Simon Glass <sjg@chromium.org>
11 years agoRFC: bootm: Add silent_linux environment variable
Simon Glass [Wed, 17 Jul 2013 03:10:00 +0000 (20:10 -0700)]
RFC: bootm: Add silent_linux environment variable

At present the console for linux is silent if the U-Boot console is silent,
unless CONFIG_SILENT_U_BOOT_ONLY is set. I wonder if a better way would be
to have an environment variable to control this? Then we can control the
verbosity from scripts, and set the variable to 'no' for those boards that
want Linux to boot with console output.

Signed-off-by: Simon Glass <sjg@chromium.org>
11 years agoSPL: Limit image name print length
Taras Kondratiuk [Tue, 16 Jul 2013 11:45:01 +0000 (14:45 +0300)]
SPL: Limit image name print length

If image name is longer than 32 bytes, then it will be truncated.
This will remove '\0' at the end of the line, so printf will
go out of string limit.

Signed-off-by: Taras Kondratiuk <taras@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
11 years agoEnable xmodem support
Angus Ainslie [Wed, 26 Jun 2013 22:54:24 +0000 (16:54 -0600)]
Enable xmodem support

This is a trivial patch that just enables xmodem downloads using the existing
ymodem framework.

Signed-off-by: Angus Ainslie <angus@akkea.ca>
11 years agoAdd TI816X evm board support
TENART Antoine [Tue, 2 Jul 2013 10:06:00 +0000 (12:06 +0200)]
Add TI816X evm board support

Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com>
[trini: Change to SPDX, fix a few compiler warnings, adapt to
CONFIG_OMAP_COMMON]
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoAdd TI816X support
TENART Antoine [Tue, 2 Jul 2013 10:05:59 +0000 (12:05 +0200)]
Add TI816X support

Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com>
[trini: Fix warnings about vtp things in emif4.c, adapt AM43XX]
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoPrepare for TI816X : reuse existing code from TI814X
TENART Antoine [Tue, 2 Jul 2013 10:05:58 +0000 (12:05 +0200)]
Prepare for TI816X : reuse existing code from TI814X

Rename some CONFIG_TI814X to a more generic CONFIG_TI81XX

Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com>
[trini: Adapt for CONFIG_OMAP_COMMON changes, AM43XX]
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoarm, da850: add ipam390 board support
Heiko Schocher [Mon, 5 Aug 2013 14:00:38 +0000 (16:00 +0200)]
arm, da850: add ipam390 board support

add the am1808 based ipam390 board from Barix.

- 128MByte, DDR2, synchronous RAM 16bit databus to SDRAM
  interface
- 128MByte, NAND Flash, 8bit databus to the NANDFlash
  Interface
- Ethernet PHY Micrel KSZ8051R via RMII
- Console on UART 0
- booting fron nand flash
- spl falcon bootmode

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@ti.com>
11 years agoarm, da850: enable the correct uart in arch_cpu_init()
Heiko Schocher [Mon, 5 Aug 2013 14:00:37 +0000 (16:00 +0200)]
arm, da850: enable the correct uart in arch_cpu_init()

in arch_cpu_init() uart2 is fix enabled, without reference the
setting from CONFIG_SYS_NS16550_COM1. Use the setting from
CONFIG_SYS_NS16550_COM1 for enabling the console.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Tom Rini <tom.rini@gmail.com>
Cc: Christian Riesch <christian.riesch@omicron.at>
11 years agobootstage: get more BOOTSTAGE_ID* in show_boot_progress()
Heiko Schocher [Mon, 5 Aug 2013 14:00:36 +0000 (16:00 +0200)]
bootstage: get more BOOTSTAGE_ID* in show_boot_progress()

In case CONFIG_BOOTSTAGE is not defined, call from bootstage_mark_name()
show_boot_progress(), so get more BOOTSTAGE_ID* ids in show_boot_progress()
if CONFIG_BOOTSTAGE is not defined.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Acked-by: Simon Glass <sjg@chromium.org>
11 years agoarm/davinci/da850: add uart0_pins_rtscts and RMII_MHz_50_CLK in emac_pins_rmii pinmux
Heiko Schocher [Mon, 5 Aug 2013 14:00:35 +0000 (16:00 +0200)]
arm/davinci/da850: add uart0_pins_rtscts and RMII_MHz_50_CLK in emac_pins_rmii pinmux

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@ti.com>
11 years agoTI:armv7: Enable CONFIG_CMD_GPIO
Tom Rini [Fri, 9 Aug 2013 15:22:20 +0000 (11:22 -0400)]
TI:armv7: Enable CONFIG_CMD_GPIO

Add the generic "poke a GPIO" command, with the GPIO related defines.

Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoTI:armv7: Enable CONFIG_CMD_SPI
Tom Rini [Fri, 9 Aug 2013 15:22:19 +0000 (11:22 -0400)]
TI:armv7: Enable CONFIG_CMD_SPI

Add the generic "poke the SPI bus" command, with the SPI related
defines.

Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoTI:omap5/dra7xx: Convert to ti_armv7_common.h
Tom Rini [Fri, 9 Aug 2013 15:22:18 +0000 (11:22 -0400)]
TI:omap5/dra7xx: Convert to ti_armv7_common.h

Update omap5_common.h to use ti_armv7_common.h, and in turn update
dra7xx_evm.h and omap5_uevm.h slightly.  The biggest changes here are
that IP blocks which exist on the platform, and had clocks enabled,
now have the drivers being built as well.

Signed-off-by: Tom Rini <trini@ti.com>
11 years agoTI:am33xx: Create common config files for TI ARMv7 platforms, and AM33xx
Tom Rini [Fri, 9 Aug 2013 15:22:17 +0000 (11:22 -0400)]
TI:am33xx: Create common config files for TI ARMv7 platforms, and AM33xx

We create two new files, include/configs/ti_armv7_common.h for all of
the common IP blocks and related features / commands we share in
virtually all of our platforms.  We then create
include/configs/ti_am335x_common.h for everything common to the am335x
SoC leaving just the board specific parts to
include/configs/ti_am335x_common.h.

Signed-off-by: Tom Rini <trini@ti.com>
11 years agoam335x_evm: Bring in 'boot_fdt' logic from i.MX
Tom Rini [Fri, 9 Aug 2013 15:22:16 +0000 (11:22 -0400)]
am335x_evm: Bring in 'boot_fdt' logic from i.MX

Bring in the 'boot_fdt' environment variable that i.MX boards use to try
and load a device tree when booting.

Signed-off-by: Tom Rini <trini@ti.com>
11 years agoarm: spl: For Falcon Mode, set a default machid of ~0
Tom Rini [Fri, 9 Aug 2013 15:22:15 +0000 (11:22 -0400)]
arm: spl: For Falcon Mode, set a default machid of ~0

With device trees, boards do not always set CONFIG_MACH_TYPE now, so we
must not rely on this define being set.  The kernel uses ~0 to see if we
have a valid machine number or not, so set that as the default, invalid
machine, id and only fix if CONFIG_MACH_TYPE is set.

Acked-by: Dan Murphy <dmurphy@ti.com>
Tested-by: Heiko Schocher <hs@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoam335x_evm: Use default baud rate table
Tom Rini [Fri, 9 Aug 2013 15:22:14 +0000 (11:22 -0400)]
am335x_evm: Use default baud rate table

Signed-off-by: Tom Rini <trini@ti.com>
11 years agoam33xx: Stop using PHYS_DRAM_1 define
Tom Rini [Fri, 9 Aug 2013 15:22:13 +0000 (11:22 -0400)]
am33xx: Stop using PHYS_DRAM_1 define

We defined PHYS_DRAM_1 to 0x80000000 (start of DRAM) and then used this
for CONFIG_SYS_SDRAM_BASE.  But then we kept on referencing PHYS_DRAM_1
in other places.  Change to directly setting CONFIG_SYS_DRAM_BASE and
then using that name in code.

Signed-off-by: Tom Rini <trini@ti.com>
11 years agoam33xx: CONFIG_DMA_COHERENT defines are unused, remove
Tom Rini [Fri, 9 Aug 2013 15:22:12 +0000 (11:22 -0400)]
am33xx: CONFIG_DMA_COHERENT defines are unused, remove

Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoOMAP3: igep00x0: allow booting with a FDT from MMC
Javier Martinez Canillas [Wed, 7 Aug 2013 15:53:19 +0000 (17:53 +0200)]
OMAP3: igep00x0: allow booting with a FDT from MMC

IGEP boards now have Device Tree support in the mainline
kernel. To boot an IGEP board using a DT, a uEnv.txt plain
text file could be used to define a custom uenvcmd that will
be run by the default boot command.

It is more convenient to change the default boot command to
allow loading a FDT if it is stored in the boot dir of the
rootfs uSD/MMC partition.

If no FDT is found then the defaul command tries to boot a
zImage without a DT using legacy boot.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
11 years agoARM: igep00x0.h: Enable the use of CMD_EXT4, CMD_FS_GENERIC and zImage.
Enric Balletbo i Serra [Wed, 7 Aug 2013 15:53:18 +0000 (17:53 +0200)]
ARM: igep00x0.h: Enable the use of CMD_EXT4, CMD_FS_GENERIC and zImage.

Able to load the kernel from some form of ext[234] or FAT. Also, with v3.9 and
later of the Linux Kernel, uImage isn't builtable anymore by default, so we
should switch to use the bootz command.

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
11 years agoomap: emif: Set initial DDR PHY config first
Taras Kondratiuk [Tue, 6 Aug 2013 13:16:50 +0000 (16:16 +0300)]
omap: emif: Set initial DDR PHY config first

Commit "OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon"
(f40107345cbcd6e0d1747eda45e76c4e2a6df0db)
changed sequence to set final DDR PHY config register value at the beginning.
Looks like it was made by mistake and should be reverted.

Signed-off-by: Taras Kondratiuk <taras@ti.com>
11 years agoARM: omap24xx: remove remainders of dead board
Masahiro Yamada [Mon, 5 Aug 2013 01:49:42 +0000 (10:49 +0900)]
ARM: omap24xx: remove remainders of dead board

Since Commit 7f5eef9 removed OMAP2420H4 support,
arm1136/omap24xx has not been used at all.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agoARM: omap3: Implement dpll5 (HSUSB clk) workaround for OMAP36xx/AM/DM37xx according...
Naumann Andreas [Tue, 9 Jul 2013 07:43:17 +0000 (09:43 +0200)]
ARM: omap3: Implement dpll5 (HSUSB clk) workaround for OMAP36xx/AM/DM37xx according to errata sprz318e.

In chapter 'Advisory 2.1 USB Host Clock Drift Causes USB Spec Non-compliance in Certain Configurations' of the TI Errata it is recommended to use certain div/mult values for the DPLL5 clock setup.
So far u-boot used the old 34xx values, so I added the errata recommended values specificly for 36xx init only.
Also, the FSEL registers exist no longer, so removed them from init.

Tested this on a AM3703 board with 19.2MHz oscillator, which previously couldnt lock the dpll5 (kernel complained). As a consequence the EHCI USB port wasnt usable in U-Boot and kernel. With this patch, kernel panics disappear and USB working fine in u-boot and kernel.

Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
[trini: Add extern to <asm/arch-omap3/clock.h>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoomap: overo: Use 200MHz SDRC timings for revision 1, 2 & 3 boards
Ash Charles [Wed, 24 Jul 2013 19:22:35 +0000 (12:22 -0700)]
omap: overo: Use 200MHz SDRC timings for revision 1, 2 & 3 boards

Gumstix uses 200Mhz RAM on revision 1, 2 & 3 COMs, so use 200MHz
timings rather than 165MHz.  Based on 6cf8bf44b1f8550e12f7f2a16e01890e5de8443d

Signed-off-by: Ash Charles <ashcharles@gmail.com>
11 years agoomap: overo: update support for Micron 1GB POP
Steve Sakoman [Wed, 24 Jul 2013 19:22:34 +0000 (12:22 -0700)]
omap: overo: update support for Micron 1GB POP

Signed-off-by: Ash Charles <ashcharles@gmail.com>
11 years agoARM: IGEP0033: Remove duplicate / unused #defines.
Enric Balletbo i Serra [Thu, 25 Jul 2013 07:27:40 +0000 (09:27 +0200)]
ARM: IGEP0033: Remove duplicate / unused #defines.

As config was originally based on am335x_evm.h we have also some
duplicate / unnused #defines.

Commit 15191c91 removed these #defines on various AM335x boards but not
for IGEP COM AQUILA. This patch simply removes them for this board.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
11 years agoARM: IGEP0033: Add support to boot from NAND.
Enric Balletbo i Serra [Thu, 25 Jul 2013 07:27:39 +0000 (09:27 +0200)]
ARM: IGEP0033: Add support to boot from NAND.

Add to the default environment the possibily to boot from NAND using
a ubi rootfs. Also the partition scheme is set as follows:

                  Start      Size
    SPL         : 0x00000000 0x00080000 (512KiB)
    U-Boot      : 0x00080000 0x00100000 (1MiB)
    U-Boot Env  : 0x00180000 0x00020000 (128KiB)
    File System : 0x001C0000 -

The ubiboot script gets the kernel and the dtb file from the boot directory
of the File System.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
11 years agoARM: IGEP0033: Remove CYGNUS name from header.
Enric Balletbo i Serra [Thu, 25 Jul 2013 07:27:38 +0000 (09:27 +0200)]
ARM: IGEP0033: Remove CYGNUS name from header.

We will not use CYGNUS names for any IGEP COM based on AM335x processor,
so, to avoid confusion, remove from headers.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
11 years agoARM: IGEP0033: Add support for Flattened Device Tree.
Enric Balletbò i Serra [Thu, 25 Jul 2013 07:27:37 +0000 (09:27 +0200)]
ARM: IGEP0033: Add support for Flattened Device Tree.

Now, the default kernel to boot the IGEP COM AQUILA is device tree based. As
old kernel is deprecated we should adapt the boot commands to use DTB files.

Also, with v3.9 and later of the Linux Kernel, uImage isn't builtable anymore
by default, so we should switch to use the bootz command.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
11 years agoARM: IGEP0033: Remove undef of CONFIG_CMD_MEMTEST
Enric Balletbo i Serra [Thu, 25 Jul 2013 07:27:36 +0000 (09:27 +0200)]
ARM: IGEP0033: Remove undef of CONFIG_CMD_MEMTEST

After commit:

  79cd2f814b1c75efd47161ac27f4cbebf768240f config_cmd_default.h: Remove CONFIG_CMD_MEMTEST

It's not necessary to undef the CONFIG_CMD_MEMTEST, so we can remove it from
configuration file.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
11 years agoARM: AM43xx: Add config file
Lokesh Vutla [Tue, 30 Jul 2013 06:06:32 +0000 (11:36 +0530)]
ARM: AM43xx: Add config file

Add config file

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
11 years agoARM: AM43xx: Add build support
Lokesh Vutla [Tue, 30 Jul 2013 06:06:31 +0000 (11:36 +0530)]
ARM: AM43xx: Add build support

Add AM43xx support in the required places

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
11 years agoARM: OMAP: Add CONFIG_OMAP_COMMON
Lokesh Vutla [Tue, 30 Jul 2013 06:06:30 +0000 (11:36 +0530)]
ARM: OMAP: Add CONFIG_OMAP_COMMON

Adding a new CONFIG_OMAP_COMMON which is included by all boards
that needs to build cpu/armv7/omap-common folder.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
11 years agoARM: AM43xx: clocks: Add dpll and clock data
Lokesh Vutla [Tue, 30 Jul 2013 06:06:29 +0000 (11:36 +0530)]
ARM: AM43xx: clocks: Add dpll and clock data

Add dpll and clock data for AM43xx

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
11 years agoARM: AM43xx: Add header files
Lokesh Vutla [Tue, 30 Jul 2013 06:06:28 +0000 (11:36 +0530)]
ARM: AM43xx: Add header files

Adding the following data:
-> Prcm structure
-> Base addresses
-> Pin mux structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
11 years agoARM: AM43xx: Add Board files
Lokesh Vutla [Tue, 30 Jul 2013 06:06:27 +0000 (11:36 +0530)]
ARM: AM43xx: Add Board files

Add board specific information for AM43xx.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
11 years agomusb: Disable extra prints
Lokesh Vutla [Tue, 30 Jul 2013 05:18:55 +0000 (10:48 +0530)]
musb: Disable extra prints

There are many musb prints in SPL and U-Boot log.
These prints are required only during musb debug.
So replacing printk with pr_debug in musb_core.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
11 years agoARM: AM33xx: Move s_init to a common place
Heiko Schocher [Tue, 30 Jul 2013 05:18:54 +0000 (10:48 +0530)]
ARM: AM33xx: Move s_init to a common place

s_init has the same outline for all the AM33xx based
board. So making it generic.
This also helps in addition of new Soc with minimal changes.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
11 years agoARM: AM33xx: Cleanup clocks layer
Lokesh Vutla [Tue, 30 Jul 2013 05:18:53 +0000 (10:48 +0530)]
ARM: AM33xx: Cleanup clocks layer

Cleaning up the clocks layer.
This helps in addition of new Soc with minimal
changes.
This is derived from OMAP4 boards.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
11 years agoARM: AM33xx: Cleanup dplls data
Lokesh Vutla [Tue, 30 Jul 2013 05:18:52 +0000 (10:48 +0530)]
ARM: AM33xx: Cleanup dplls data

Locking sequence for all the dplls is same.
In the current code same sequence is done repeatedly
for each dpll. Instead have a generic function
for locking dplls and pass dpll data to that function.

This is derived from OMAP4 boards.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
11 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Tom Rini [Wed, 14 Aug 2013 19:16:48 +0000 (15:16 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

11 years agoinclude/fsl_usb.h: Cleanup license header
York Sun [Wed, 14 Aug 2013 17:56:49 +0000 (10:56 -0700)]
include/fsl_usb.h: Cleanup license header

Replace license header with SPDX license identifier.
Replace GPL-2.0 with GPL-2.0+.

Signed-off-by: York Sun <yorksun@freescale.com>
Acked-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
11 years agopowerpc/c29xpcie: add readme document for c29xpcie
Po Liu [Thu, 16 May 2013 01:27:28 +0000 (09:27 +0800)]
powerpc/c29xpcie: add readme document for c29xpcie

Signed-off-by: Po Liu <Po.Liu@freescale.com>
11 years agopowerpc/usb: Depricate usb_phy_type and usb_dr_mode uboot env variables
ramneek mehresh [Mon, 5 Aug 2013 10:32:53 +0000 (16:02 +0530)]
powerpc/usb: Depricate usb_phy_type and usb_dr_mode uboot env variables

Remove getting values of usb mode and phy_type from "usb_dr_mode"
and "usb_phy_type" uboot env variables. Now, these are determined
only from hwconfig string

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
11 years agofsl/usb: Move USB internal phy definitions to fsl_usb.h
ramneek mehresh [Mon, 5 Aug 2013 10:30:16 +0000 (16:00 +0530)]
fsl/usb: Move USB internal phy definitions to fsl_usb.h

fsl_usb.h file created to share data bewteen usb platform code
and usb ip driver. Internal phy structure definitions moved to
this file

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
11 years agopowerpc/mpc85xx:Avoid hardcoded init for serdes block 1 & 2
Prabhakar Kushwaha [Wed, 31 Jul 2013 11:26:41 +0000 (16:56 +0530)]
powerpc/mpc85xx:Avoid hardcoded init for serdes block 1 & 2

It is not necessary for all processor to have serdes block 1 & 2.
They may have only one serdes block.

So, put serdes block 1 & 2 related code under defines

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
11 years agotegra: Avoid using I2C prior to relocation
Simon Glass [Wed, 7 Aug 2013 05:52:25 +0000 (22:52 -0700)]
tegra: Avoid using I2C prior to relocation

Tegra recently moved to the new I2C framework, which sets up I2C prior to
relocation, and prior to calling i2c_init_board(). This causes a crash on
Tegra boards.

Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
11 years agoMerge branch 'dcc' of git://www.denx.de/git/u-boot-microblaze
Tom Rini [Tue, 13 Aug 2013 20:49:44 +0000 (16:49 -0400)]
Merge branch 'dcc' of git://www.denx.de/git/u-boot-microblaze

11 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Tom Rini [Tue, 13 Aug 2013 13:14:02 +0000 (09:14 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

11 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-mips
Tom Rini [Tue, 13 Aug 2013 12:58:47 +0000 (08:58 -0400)]
Merge branch 'master' of git://www.denx.de/git/u-boot-mips

11 years agoMIPS: bootm: drop obsolete Qemu specific bootm implementation
Daniel Schwierzeck [Sat, 12 Jan 2013 17:18:20 +0000 (18:18 +0100)]
MIPS: bootm: drop obsolete Qemu specific bootm implementation

The Qemu specific bootm implementation was intended for a special
Qemu target in Linux kernel. But this target has been dropped in
v2.6.25-rc1 by commit 302922e5f6901eb6f29c58539631f71b3d9746b8

    Author: Ralf Baechle <ralf@linux-mips.org>
    Date:   Tue Jan 29 10:15:02 2008 +0000

    [MIPS] Qemu: Remove platform.

    The Qemu platform was originally implemented to have an easily supportable
    platform until Qemu reaches a state where it emulates a real world system.
    Since the latest release Qemu is capable of emulating the MIPSsim and
    Malta platforms, so this goal has been reached.  The Qemu plaform is also
    rather underfeatured so less useful than a Malta emulation.

Thus the special bootm implementation is obsolete by now and can be
dropped. The Qemu support in U-Boot is going to be replaced by MIPS Malta
board support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
11 years agoMIPS: bootm: add YAMON style Linux preparation/jump code for Qemu Malta
Daniel Schwierzeck [Thu, 30 May 2013 17:04:20 +0000 (19:04 +0200)]
MIPS: bootm: add YAMON style Linux preparation/jump code for Qemu Malta

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
11 years agoMIPS: bootm: add support for generic relocation of init ramdisks
Daniel Schwierzeck [Thu, 9 May 2013 15:10:06 +0000 (17:10 +0200)]
MIPS: bootm: add support for generic relocation of init ramdisks

All linux kernels after v2.6 require a page-aligned location of
an external init ramdisk. Enable CONFIG_SYS_BOOT_RAMDISK_HIGH to
support this with the generic U-Boot relocation code.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
11 years agoMIPS: bootm: refactor initialisation of kernel environment
Daniel Schwierzeck [Thu, 9 May 2013 15:10:06 +0000 (17:10 +0200)]
MIPS: bootm: refactor initialisation of kernel environment

Move initialisation of Linux environment to separate functions.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
11 years agoMIPS: bootm: refactor initialisation of kernel cmdline
Daniel Schwierzeck [Thu, 9 May 2013 15:10:06 +0000 (17:10 +0200)]
MIPS: bootm: refactor initialisation of kernel cmdline

Move initialisation of Linux command line to separate functions.
Also add support for bootm subcommand 'cmdline'.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
11 years agoMIPS: bootm: add support for LMB
Daniel Schwierzeck [Thu, 9 May 2013 15:10:06 +0000 (17:10 +0200)]
MIPS: bootm: add support for LMB

This is required for init ramdisk relocation and device tree
support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
11 years agoMIPS: bootm: optimize kernel entry call
Daniel Schwierzeck [Thu, 9 May 2013 15:10:06 +0000 (17:10 +0200)]
MIPS: bootm: optimize kernel entry call

Fix signature of kernel entry function. Mark the kernel entry
with __noreturn for better code optimisation.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
11 years agoMIPS: bootm: fix checkpatch.pl warnings
Daniel Schwierzeck [Thu, 9 May 2013 15:10:06 +0000 (17:10 +0200)]
MIPS: bootm: fix checkpatch.pl warnings

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
11 years agoserial: arm_dcc: Register with serial core
Jagannadha Sutradharudu Teki [Sat, 3 Aug 2013 19:52:25 +0000 (01:22 +0530)]
serial: arm_dcc: Register with serial core

Register arm_dcc with drivers/serial/serial.c

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
11 years agoserial: arm_dcc: Remove stdio structure support
Jagannadha Sutradharudu Teki [Sat, 3 Aug 2013 19:52:24 +0000 (01:22 +0530)]
serial: arm_dcc: Remove stdio structure support

Removed stdio structure ops support on arm_dcc
driver, and need to register with serial core
so-that it can access like remianing serial drivers.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
11 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-video
Tom Rini [Mon, 12 Aug 2013 22:06:30 +0000 (18:06 -0400)]
Merge branch 'master' of git://www.denx.de/git/u-boot-video

11 years agopowerpc/mpc85xx: Cleanup license header in source files
York Sun [Mon, 12 Aug 2013 21:57:12 +0000 (14:57 -0700)]
powerpc/mpc85xx: Cleanup license header in source files

Fix the license header introduced by the following patches

Add TWR-P10xx board support
Add T4240EMU target
IDT8T49N222A configuration code
Add C29x SoC support
Add support for C29XPCIE board

Signed-off-by: York Sun <yorksun@freescale.com>
11 years agoedid: rename struct member to fix two EDID_* macros
Christian Gmeiner [Wed, 7 Aug 2013 07:22:33 +0000 (09:22 +0200)]
edid: rename struct member to fix two EDID_* macros

Without this change EDID_DETAILED_TIMING_VSYNC_OFFSET
and EDID_DETAILED_TIMING_VSYNC_PULSE_WIDTH macros can
not be used (compile error).
The fix is quite trivial: rename struct member to the
expected name.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
11 years agoexynos: video: change mipi dsi write function parameters correctly
Donghwa Lee [Mon, 5 Aug 2013 04:34:32 +0000 (13:34 +0900)]
exynos: video: change mipi dsi write function parameters correctly

This patch have changed mipi dsi write functions' parameters correctly
so that type cast operations were removed. And mipi dsi payload is
composed with array of panel commands to improve readability.

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
11 years agovideo: Add small 4x6 font from Linux
Marek Vasut [Tue, 30 Jul 2013 21:37:58 +0000 (23:37 +0200)]
video: Add small 4x6 font from Linux

This font is based on Linux drivers/video/console/font_mini_4x6.c as of commit:

commit bcfbeecea11c15e243f076d37d637c2598aff4fe
Author: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Date:   Sun Aug 12 15:05:10 2012 +0000

    drivers: console: font_: Change a glyph from "broken bar" to "vertical line"

I removed these lines as they are useless in U-Boot:
  #include <linux/font.h>
  #define FONTDATAMAX 1536
  Whole "const struct font_desc font_mini_4x6" block

This patch also adds a new configuration option to select this smaller font,
CONFIG_VIDEO_FONT_4X6 , but this is disabled by default. The default setting
is the regular "large" font.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
11 years agovideo: Encapsulate font in video_font_data.h
Marek Vasut [Tue, 30 Jul 2013 21:37:57 +0000 (23:37 +0200)]
video: Encapsulate font in video_font_data.h

This patch moves all the font configuration values into video_font_data.h
so they are all in the right place with the font. The video_font.h now only
includes video_font_data.h and will allow us to select and include different
font once more fonts are added.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
[agust: fixed build warning for mcc200]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
11 years agompc5200: Misc updates to a3m071 config header
Stefan Roese [Sat, 22 Jun 2013 14:16:25 +0000 (16:16 +0200)]
mpc5200: Misc updates to a3m071 config header

This patch changes some features of the a3m071/a4m2k board support:

- Add bootcounter support
- Update MTD env default to correct values
- Add mtdparts to bootargs for mtd partitioning via kernel cmdline
- Added some default env variables for easy updating (kernel, dtb)
- Change README to the updated flash locations

Signed-off-by: Stefan Roese <sr@denx.de>
11 years agoMerge branch 'fpga' of git://www.denx.de/git/u-boot-microblaze
Tom Rini [Mon, 12 Aug 2013 12:54:32 +0000 (08:54 -0400)]
Merge branch 'fpga' of git://www.denx.de/git/u-boot-microblaze

11 years agoMerge branch 'master' of git://git.denx.de/u-boot-fdt
Tom Rini [Mon, 12 Aug 2013 12:49:44 +0000 (08:49 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-fdt

11 years agoMerge branch 'master' of git://git.denx.de/u-boot-spi
Tom Rini [Mon, 12 Aug 2013 12:48:49 +0000 (08:48 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-spi

11 years agofpga: zynqpl: Clear loopback mode during device init
Soren Brinkmann [Sat, 15 Jun 2013 00:43:24 +0000 (17:43 -0700)]
fpga: zynqpl: Clear loopback mode during device init

Some versions of the Zynq first stage boot loader enable PCAP loopback
during boot regardless of whether or not the boot image includes PL
configuration. This behavior only appears in certain boot modes (notably
QSPI boot). Attempting to configure the PL with the loopback bit set
will result in timeouts and will prevent successful configuration.

In order to avoid this problem, and to avoid dependency on the version
of the FSBL used to boot the system, ensure that the loopback enable bit
is cleared when loading the driver.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
11 years agofpga: zynqpl: Add support for zc7100 device.
Michal Simek [Mon, 17 Jun 2013 11:54:07 +0000 (13:54 +0200)]
fpga: zynqpl: Add support for zc7100 device.

- Add support for zc7100 device.
- FPGA programming on few of the SOC(zc7100) takes more
  than 1sec, hence increased the program time by 4sec to
  sync' all soc's.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
11 years agolibfdt: SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
Roger Meier [Fri, 26 Jul 2013 23:12:38 +0000 (01:12 +0200)]
libfdt: SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause

Signed-off-by: Roger Meier <roger@bufferoverflow.ch>
Acked-by: Wolfgang Denk <wd@denx.de>
11 years agovideo: add an option to skip cfb console init
Heiko Schocher [Sat, 3 Aug 2013 05:22:53 +0000 (07:22 +0200)]
video: add an option to skip cfb console init

This patch add an option to skip cfb console init for boards
who want to show a logo, but not use the cfb console. This is
needed for the siemens boards, which have a bmp bootlogo, but
do not need the cfb console.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
[agust: use '__weak int board_cfb_skip(void)']
Signed-off-by: Anatolij Gustschin <agust@denx.de>
11 years agotools, bmp_logo: fix index from uint16_t to int to allow bigger logos
Heiko Schocher [Sat, 3 Aug 2013 05:22:52 +0000 (07:22 +0200)]
tools, bmp_logo: fix index from uint16_t to int to allow bigger logos

when generating the bmp_logo_bitmap, the index is casted
as an uint16_t. So bigger logos as 65535 bytes are converted wrong
Fix this.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
11 years agovideo, da8xx-fb: show fb addr in bdinfo
Heiko Schocher [Sat, 3 Aug 2013 05:22:51 +0000 (07:22 +0200)]
video, da8xx-fb: show fb addr in bdinfo

without this patch the bdinfo command shows:
U-Boot# bd
arch_number = 0x000010DC
[...]
sp start    = 0x8EF32F20
FB base     = 0x00000000

with this patch it shows the address where the framebuffer
for this video driver start:

arch_number = 0x000010DC
[...]
sp start    = 0x8EF32F20
FB base     = 0x8EF3C788

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Tom Rini <trini@ti.com>
Acked-by: Tom Rini <trini@ti.com>
11 years agovideo, da8xx-fb: changes for am335x usage
Heiko Schocher [Sat, 3 Aug 2013 05:22:50 +0000 (07:22 +0200)]
video, da8xx-fb: changes for am335x usage

to use this driver also on am335x based boards, the following
changes are made:

- struct lcd_ctrl_config lcd_cfg is now configurable
  through board code

- controller base is configurable through define
  DA8XX_LCD_CNTL_BASE. To be compatible with older
  da8xx based boards: If this define is missing, the
  DAVINCI_LCD_CNTL_BASE is used

- Determine LCD IP Version, and make the driver
  working on lcd revision register values:
  Version 1:
  0x4C100102
  Version 2:
  0x4F200800
  0x4F201000

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Tom Rini <trini@ti.com>
Acked-by: Tom Rini <trini@ti.com>
11 years agoarm, am33xx: add clk_get prototype
Heiko Schocher [Sat, 3 Aug 2013 05:22:49 +0000 (07:22 +0200)]
arm, am33xx: add clk_get prototype

the clk_get() function is needed for the da8xx-fb video driver,
which is used on the am3xx based siemens boards.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@ti.com>
Acked-by: Tom Rini <trini@ti.com>
11 years agovideo, da8xx: move da8xx-fb.h to drivers/video
Heiko Schocher [Sat, 3 Aug 2013 05:22:48 +0000 (07:22 +0200)]
video, da8xx: move da8xx-fb.h to drivers/video

the da8xx-fb driver works also on am335x boards. So move
the da8xx-fb.h file from arch/arm/include/asm/arch-davinci
to drivers/video, so this driver can used from am335x
based boards. Also add WVGA panel_type.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Tom Rini <trini@ti.com>
Acked-by: Tom Rini <trini@ti.com>
11 years agovideo: add L5F31188 TFT-LCD panel driver
Hyungwon Hwang [Wed, 31 Jul 2013 08:25:34 +0000 (17:25 +0900)]
video: add L5F31188 TFT-LCD panel driver

This is u-boot driver for L5F31188 panel.
I tested it in the board based on MIPI DSI with EXYNOS4 series, and it worked well.

Changes in V2:
- Replaced license header by SPDX-License-Identifier.

Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Donghwa Lee <dw09.lee@samsung.com>
[agust: sort Makefile entry alphabetically]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
11 years agovideo: Fix cfb_console for 4-bit wide font
Marek Vasut [Tue, 30 Jul 2013 21:37:59 +0000 (23:37 +0200)]
video: Fix cfb_console for 4-bit wide font

The cfb_console can't handle 4-bit wide font properly, since with
4-bit wide font, all 8 bits are drawn. Unbreak the video_drawchars()
function to correctly render 4-bits only on such fonts.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
11 years ago83xx/pcie: fix build error for 83xx pcie
Roy Zang [Mon, 10 Dec 2012 11:02:59 +0000 (19:02 +0800)]
83xx/pcie: fix build error for 83xx pcie

Fix the following build error caused by patch "powerpc/pcie: add PCIe
version 3.x support":

pcie.c:302:34: error: 'PCI_LTSSM' undeclared (first use in this function)
pcie.c:303:15: error: 'PCI_LTSSM_L0' undeclared (first use in this function)

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
11 years agovideo: Implement continuous screen refresh for SmartLCD into mxsfb
Marek Vasut [Tue, 30 Jul 2013 21:37:54 +0000 (23:37 +0200)]
video: Implement continuous screen refresh for SmartLCD into mxsfb

The LCDIF interface doesn't give us any means to do continuous refresh
when driving a SmartLCD. To work this around, we produce a special
circular DMA descriptor, which only writes the HW_LCDIF_CTRL0 register
and sets the RUN bit.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
11 years agovideo: Add System-Mode configuration hook into mxsfb
Marek Vasut [Tue, 30 Jul 2013 21:37:53 +0000 (23:37 +0200)]
video: Add System-Mode configuration hook into mxsfb

Add hook that allow configuring SmartLCD attached the MXS LCDIF
controller operating in System-Mode. This hook can be overriden
by a platform-specific SmartLCD programming routine, which writes
the SmartLCD specific values into it's registers.

Also, this patch makes sure the SYNC signals are off for the
SmartLCD case.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
11 years agovideo: Allocate the MXSFB framebuffer aligned
Marek Vasut [Tue, 30 Jul 2013 21:37:52 +0000 (23:37 +0200)]
video: Allocate the MXSFB framebuffer aligned

Allocate the framebuffer aligned so it can be flushed
and the flush_dcache_range() function won't complain.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
11 years agodma: apbh: Add special circular mode for LCD
Marek Vasut [Tue, 30 Jul 2013 21:37:51 +0000 (23:37 +0200)]
dma: apbh: Add special circular mode for LCD

Add special function that executes a specially crafted circular
DMA descriptor. The function doesn't wait for the descriptor to
finish the transfer, since the descritor never finishes. This is
useful when operating a SmartLCD through the LCDIF interface, as
the LCDIF does not give us any means to have continuous refresh
of the SmartLCD. Instead, the RUN bit in the LCDIF CTRL register
must be triggered manually. This can be worked around by starting
an DMA transfer which continuously sets the RUN bit. This function
allows starting exactly such transfer.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
11 years agopowerpc/mpc8xxx: Fix TIMING_CFG_3[EXT_ACTTOPRE]
James Yang [Mon, 22 Jul 2013 16:35:26 +0000 (09:35 -0700)]
powerpc/mpc8xxx: Fix TIMING_CFG_3[EXT_ACTTOPRE]

The TIMING_CFG_3[EXT_ACTTOPRE] register field is 2 bits wide, but
the mask omitted the LSB.  This patch provides a 2-bit wide mask.

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
11 years agopowerpc/c29xpcie: add support for C29XPCIE board
Mingkai Hu [Thu, 4 Jul 2013 09:33:43 +0000 (17:33 +0800)]
powerpc/c29xpcie: add support for C29XPCIE board

C29XPCIE board is a series of Freescale PCIe add-in cards to perform
as public key crypto accelerator or secure key management module. It
includes C293PCIE board, C293PCIE board and C291PCIE board.

 - 512KB platform SRAM in addition to 512K L2 Cache/SRAM
 - 512MB soldered DDR3 32bit memory
 - CPLD System Logic
 - 64MB x16 NOR flash and 4GB x8 NAND flash
 - 16MB SPI flash

Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Singed-off-by: Po Liu <Po.Liu@freescale.com>
[yorksun: Fixup include/configs/C29XPCIE.h]
Signed-off-by: York Sun <yorksun@freescale.com>
11 years agopowerpc/85xx: Add C29x SoC support
Mingkai Hu [Thu, 4 Jul 2013 09:30:36 +0000 (17:30 +0800)]
powerpc/85xx: Add C29x SoC support

The Freescale C29x family is a high performance crypto co-processor.
It combines a single e500v2 core with necessary SEC engine. There're
three SoC types(C291, C292, C293) with the following features:

 - 512K L2 Cache/SRAM and 512 KB platform SRAM
 - DDR3/DDR3L 32bit DDR controller
 - One PCI express (x1, x2, x4) Gen 2.0 Controller
 - Trust Architecture 2.0
 - SEC6.0 engine

Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Po Liu <Po.Liu@freescale.com>
11 years agopowerpc/pcie: remove PCIe version 3.x define for B4860 and B4420
Zang Roy-R61911 [Wed, 3 Jul 2013 23:43:33 +0000 (07:43 +0800)]
powerpc/pcie: remove PCIe version 3.x define for B4860 and B4420

B4860 and B4420 has PCIe version 2.4 IP instead of 3.x

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
11 years agopowerpc/pcie: add PCIe version 3.x support
Zang Roy-R61911 [Wed, 3 Jul 2013 23:25:03 +0000 (07:25 +0800)]
powerpc/pcie: add PCIe version 3.x support

T4240 PCIe IP is version 3.0 and has some update comparing previous
QorIQ products.

1.  Move Freescale specific register define
to
arch/powerpc/include/asm/fsl_pci.h
and update the register offset define for T4240.

2. add the status/control register define
use status/control register to judge the link status

3. The original code uses 'Programming Interface' field to judge if PCIE is
EP or RC mode, however, T4240 does not support this functionality.
According to PCIE specification, 'Header Type' offset 0x0e is used to
indicate header type, so for PCIE controller, the patch changes code to
use 'Header Type' field to identify if the PCIE is RC or EP mode.

This patch fixes  the PCIe card link up issue on T4240QDS.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
11 years agopowerpc/rman: fix RMan support for t4240 and b4860
Minghuan Lian [Wed, 3 Jul 2013 10:32:41 +0000 (18:32 +0800)]
powerpc/rman: fix RMan support for t4240 and b4860

1. Add CONFIG_SYS_DPAA_RMAN macro to t4240 and b4860.
2. Decrease RMan liodn offset number.
SET_RMAN_LIODN() is used to set liodn offset of RMan blocks 0-3.
For t4240 and b4860, RMan liodn base is assigned to 922, the original
offset number is too large that the liodn (base+offset 922+678 = 1600)
is greater than 0x500 the maximum liodn number.

Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>