Synchronise with 3.7-rc6

Pulls in the CIRCLEQ fix.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

scripts: use a dot to separate third and fourth digits

Traditionally, Linux distributions have been using the dash as a separator
between the package's upstream versionning and their own local packaging
versioning.

Using a dash in kconfig-frontends' own versioning scheme may confuse the
distributions, which may not expect this situation (and even if some do,
not all do).

In the beginings, I thought about using a dash to make it explicit that
the digits before the dash was Linux' version, while the digit(s) after
the dash was kconfig-frontends' version. That, because the Linux version
has only two digits for .0 releases, and three digits for stable releases.
But since the Linux kernel's Makefile still report a three-digit version
even for .0 releases, we ended up always using a three-digit Linux version,
and thus always had a four-digit kconfig-frontends' version.

So, use a dot instead of a dash.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronise with 3.7-rc5

Version-bump only.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronise with 3.7-rc4

Version-bump only.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronsie with 3.7-rc3

Version-bump only.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronise with 3.7-rc2

Version bump only.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: avoid warning with automake 1.12 on Cygwin

With automake 1.12 came a new macro, AM_PROG_AR, which *must* be used if
the archiver (eg. ar on GNU systems) is used, to support exotic archivers
such as the one from Microsoft (lib).

Unfortunately, this macro causes issues on older automake versions, and
thus needs to be conditionalised (if that wasn't a word, it now is ;-) )

Furthermore, this macro *must* be called before we initialise libtool
(with LT_INIT).

Sigh... :-/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: CIRCLEQ are needed in the parser, not only in mconf

In fact, the CIRCLEQ are needed in the parser, so all the frontends
are impacted, not only mconf.

Fail building on systems that miss those macros, instead of just
disabling mconf.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

hgignore: ignore generated utilities on Cygwin

Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Message-Id: <4554ed8c5a7b5605d580.1350590610@YAAKOV04>

configure: check for sys/queue.h and CIRCLEQ_XXX

mconf and nconf need the CIRCLEQ_XXX macros defined in sys/queue.h, so check
for them, as they are missing on legacy systems (eg. Debian potato).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronise with 3.7rc1

Pull-in those changes:
    kconfig: replace 'oldnoconfig' with 'olddefconfig', and keep the old name as an alias
    menuconfig: Assign jump keys per-page instead of globally
    menuconfig: Do not open code textbox scroll up/down
    menuconfig: Add jump keys to search results
    menuconfig: Extend dialog_textbox so that it can return to a scrolled position
    menuconfig: Extend dialog_textbox so that it can exit on arbitrary keypresses
    menuconfig: Remove superfluous conditionnal
    kconfig: document oldnoconfig to what it really does in conf.c
    kconfig/mconf.c: revision of curses initialization.

Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>

version: switch back to development version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

docs/known-issues: add Cygwin's libglade explicit link againg -png12

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Added tag kconfig-frontends-3.6.0-0 for changeset f973d63f037a

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

version: set version string for 3.5.0-0

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronise with 3.6

Version-bump only.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronise with 3.6-rc7

Version-bump only.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronise with 3.6-rc6

Version-bump only.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronise with 3.6-rc5

Version-bump only.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronise with 3.6-rc4

Version-bump only

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronise with 3.6-rc3

Version-bump only

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronise with 3.6-rc2

Version-bump only.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronise with 3.6-rc1

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

libs/parser: remove legacy, stray comment

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

nconf: fix build where ncurses headers are in subdirectories

Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Message-Id: <543a2e61be6d914d8b59.1342991852@YAAKOV04>

parser: fix shared library build on Cygwin

libtool requires the -no-undefined flag on PE platforms to create shared
libraries.

We also need to link against $(lib_INTL) or there would be link errors, since
Cygwin relies on libintl, and PE platforms imply -Wl,-as-needed,-no-undefined.

Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Message-Id: <baae5e82ce617196ab12.1342985551@YAAKOV04>

configure: check ncursesw headers first

If both ncurses and ncursesw are installed, the headers ncurses/curses.h
and ncursesw/curses.h differ, and since libncursesw will be found first,
so should ncursesw/curses.h.

Based on kernel commit 84354256bff5e95ed3dd8d42b4d7322044c979d7.

Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Message-Id: <e86967e4b396876d4a96.1342985552@YAAKOV04>

version: switch back to a devel version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Added tag kconfig-frontends-3.5.0-0 for changeset 7ad091e1eac1

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

version: set version string for 3.5.0-0

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronise with 3.5

Version-bump only.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Synchronise with 3.5-rc6

Version-bump only.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

synchronise with 3.5-rc5

Version-bump only.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

synchronise with 3.5-rc2

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

utils: remove streamline

streamline is very Linux kernel specific, and can no really be used
for anything but a Linux kernel .config file.

Remove from the utilities.

Remove a superfluous space im utils/Makefile.am at the same time.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

scripts/version: remove left-over debug line

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: fix build out-of-tree

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

utils/tweak: use ./configured config prefix

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

utils/tweak: make it case-sensitive

Although the Linux kernel does not care about case-sensitivity,
we do, because it is entirely valid to use mixed-case in .in files.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: add silent-rules support to custom rules

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: use automake's silent-rules, enhance to silence make

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

scripts/version: add option to only print internal version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

synchronise with 3.5-rc1

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

scripts/ksync: fix make dist

The file that contains the list of files to sync has
been renamed, but the Makefile was not updated. Fix that.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

scripts/ksync: rename the list of files to sync

Bring it up in line with the ksync naming scheme.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

scripts/ksync: append git-log when syncing

When syncing from the kernel, run 'git log' on the affected files,
and store it locally.

This will be used to generate announcements for the future releases.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

scripts/ksync: do not redirect stdin

If stdin is redirected, and a patch does not apply cleanly, the user won't
be able to act on patch messages, and patch will get confused because it
would read patch data when it prompts the user.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

readme: reformat and fix typos

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

docs: add a list of known issues

So far, document limitations when building under Cygwin.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: add option to disable l10n

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

utils: don't build gettext if intl support is missing

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: cleanup the gettext checks

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: add check for libintl

Compiling on Cygwin requires explicit link against libintl.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

libs/parser: do not use gettext if not available

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: fix no libintl header

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: rename GETTEXT variable

This variable contains pre-processor flags, so name it accordingly.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

scripts/ksync: bundle our patches in the release tarballs

Because scripts/ksync is bundled, so must we also bundle our patches.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

version: back to development version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Added tag kconfig-frontends-3.4.0-0 for changeset bc3a6b909a61

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Change version string for the 3.4.0-0 release

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

synchronise with 3.4

Only bump version string.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

synchronise with 3.4-rc7

Only bump version string.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

synchronise with 3.4-rc6

Only bump version string.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

scripts: bundle the version file and version script

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

synchronise with 3.4-rc5

Only bump version string.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

synchronise with 3.4-rc4

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

scripts/ksync: the utilities were renamed

The utilities source files were recently renamed, but the
sync list was not updated to reflect this change.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: enable utilities by default

Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>

configure: allow user to override program-prefix

By default, use the current 'kconfig-' prefix,
but allow a user to change it, or even disable it.

Reported-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>

Synchronise from kernel

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

hgignore: ignore new frontends names, ignore generated utilities

Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>

scripts/ksync: add the sync-from-kernel script to the package

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: dump simpler, easier to read configuration settings

Re-organise the final configuration settings dump.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

utils/kconfig-gettext: build and install

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

utils/: new directory for kconfig utilities, install them

Create a new directory to store the utilities that deal
with kconfig files, .config and .in alike.

For now, only the scripts are installed

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

frontends: prefix frontends with 'kconfig-'

By default, prefix the frontends executables with 'kconfig-'
to avoid any name-space collision ('conf' is too generic).

At the same time, prefix all libraries with kconfig-, for
consistency (except libkconfig-parser, which only gains a
dash in-between 'kconfig' and 'parser').

Besides, utilities (coming in a following cset) will all be
prefixed with 'kconfig-' to avoid name-space collision, too.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

libs/parser: clean generated files

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

frontends/qconf: clean generated files

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

libs/images: make it a proper library

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

misc: add script to manipulate .config from cmdline

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

bootstrap: install the boostrap script

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

docs: package and install the doc

Add the documentation to the distribution, and install it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

synchronise with 3.4-rc2

Nothing, except version bump.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: small eye-candy

Line-up the summary config lines.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

libs/images: fix warnings

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

frontends/gconf: fix warning about unused variable

As we hard-code the path to our glade file, this variable
is no longer used, and thus generates a warning.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: enable building with -Wall

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: add option to build with -Werror

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

synchronise with 3.4-rc1

No change, just update .version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

sync with current Linux kernel code

Yes, we sync up with a random snapshot of the Linux kernel,
but the changeset number is in our version string, anyway.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

version: Redo the version string computation

In case the kconfig-frontends version is 'hg', always include
the Linux kernel changeset we last synced up with, and include
the potential '-rcX' if present.

In case the kconfig-frontends version is not 'hg', we assume
this is a digit-version, and we do not include hte kernel cset
in the version, but we keep an potential '-rcX' if present.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

libs/parser: move installed includes

Currently, includes are installed in ${prefix}/include, but
this is not not nice, as the headers are not properly named.

Install them into a sub-directory with a proper name.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: change contact email address

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

docs: initial sync from kernel

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

misc/sync-list: also synchronsie a bit of documentation

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

scripts/ksync: cerate destination dir before copy

When adding new files to the sync list, the destination dir
must exist before we copy the new files there.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

version: we're now back to a devel version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: if no moc found, disable qconf or fail

If moc is missing, and user explictly enabled qconf, fail,
If moc is missing, but qconf is auto, then disable qconf.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: advertise the MOC variable

If the user has moc installed in a weird place, he/she can use the
MOC variable to set the path to moc. Advertise this variable in
the ./configure help.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

configure: detect moc properly

The moc executable used for Qt may be installed under different names
in different places. Try to identify one that matches the version of
Qt that is being used.

Signed-off-by: Peter Kjellerstedt <pkj@axis.com>
[yann.morin.1998@free.fr: fix MOC under-quotation, fix code layout]
Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>