serial: lpuart: Add driver model serial support

This adds driver model support to lpuart serial driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Tested-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>

serial: lpuart: Prepare the driver for DM conversion

Create internal routines which take lpuart's register base as
a parameter, in preparation for driver model conversion.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>

serial: lpuart: Call local version of setbrg and putc directly

There is no need to go through serial driver subsystem, instead
call the driver's setbrg and putc routines directly.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>

serial: lpuart: Fix several cosmetic issues

Clean up the driver codes a little bit, by:
- Use tab instead of space in the macro defines
- Use single line comment whenever possible
- Fix insertion of blank lines

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>

serial: lpuart: Move CONFIG_FSL_LPUART to Kconfig

LPUART is seen on Freescale VF610 and QorIQ Layerscape devices.
Create a Kconfig option and move it to defconfig for all boards
that have this serial driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Simon Glass <sjg@chromium.org>

arm: ls1021atwr: Convert to driver model and enable serial support

Convert ls1021atwr_nor to driver model support. As a start, enable
ns16550 serial port driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

Revert "fdt_support: Add multi-serial support for stdout fixup"

This reverts commit 3e303f748cf57fb23e8ec95ab7eac0074be50e2b.

The fix up in the /aliases node does not work under the following
scenarios:
- Not every non-DM serial driver was written to have a driver name
  that conforms the format of "serial%d" or "eserial%d".
- With driver model serial, the stdio_devices[] stores the serial
  device node name in the device tree.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

test/py: add a test for the sleep command

Execute "sleep", and validate that it sleeps for approximately the correct
amount of time.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>

test/py: test the ums command

This test invokes the "ums" command in U-Boot, and validates that a USB
storage device is enumerated on the test host system, and can be read
from.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>

test/py: test the shell if command

Migrate all most tests from command_ut.c into the Python test system.
This allows the tests to be run against any U-Boot binary that supports
the if command (i.e. where hush is enabled) without requiring that
binary to be permanently bloated with the code from command_ut.

Some tests in command_ut.c can only be executed from C code, since they
test internal (more unit-level) features of various U-Boot APIs. The
migrated tests can all operate directly from the U-Boot console.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>

test/py: add test of basic shell functionality

This tests whether the following features of the U-Boot shell:
- Execution of a directly entered command.
- Compound commands (; delimiter).
- Quoting of arguments containing spaces.
- Executing commands from environment variables.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>

test/py: test the md/mw commands

This tests whether md/mw work, and affect each-other.

Command repeat is also tested.

test/cmd_repeat.sh is removed, since the new Python-based test does
everything it used to.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>

test/py: add test of setenv/printenv/echo

This tests basic environment variable functionality.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>

test/py: test that sandbox exits when asked

Test the sandbox port's implementation of the reset command and SIGHUP
handling. These should both cause the U-Boot process to exit gracefully.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>

test/py: Implement pytest infrastructure

This tool aims to test U-Boot by executing U-Boot shell commands using the
console interface. A single top-level script exists to execute or attach
to the U-Boot console, run the entire script of tests against it, and
summarize the results. Advantages of this approach are:

- Testing is performed in the same way a user or script would interact
  with U-Boot; there can be no disconnect.
- There is no need to write or embed test-related code into U-Boot itself.
  It is asserted that writing test-related code in Python is simpler and
  more flexible that writing it all in C.
- It is reasonably simple to interact with U-Boot in this way.

A few simple tests are provided as examples. Soon, we should convert as
many as possible of the other tests in test/* and test/cmd_ut.c too.

The hook scripts, relay control utilities, and udev rules I use for my
own HW setup are published at https://github.com/swarren/uboot-test-hooks.

See README.md for more details!

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org> #v3

patman: Add --thread option

Add option to create threaded series of patches.
With it, it will be possible to create patch threads like this:
[PATCH 0/10] Add support for time travel
  [PATCH 1/10] Add Flux Capacitor driver
  [PATCH 2/10] Add Mr. Fusion driver
  (...)

Internally it will call git send-email with --thread option

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

clk: add API to enable clock

The most basic thing for clock is to enable it, but it is missing
in this uclass.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>

clk: add static qualifier to local functions

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>

clk: add needed include and declaration to include/clk.h

This header uses ulong, so it needs to include <linux/types.h>.
Likewise, "struct udevice" must be declared before it is used.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>

clk: fix comments in include/clk.h

The comment about get_periph_rate() is the same as that of
set_periph_rate().

I am fixing typos here and there while I am in this file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>

clk: move Kconfig options into sub-menu

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>

usb: Define USB_MAX_STOR_DEV in only one place

We can define this in the header file and use it in usb_storage.c. There is
no need to define it twice. Remove the #define from usb_storage.c.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>

timer: sandbox: work without device tree

A default invocation of sandbox U-Boot apparently uses no device tree,
which means that no timer is registers, which in turn means that the
sleep shell command hangs.

Fix the sandbox timer code to register a device when there's no DT, just
like e.g. the sandbox reset driver does. When there's no DT, the DM uclass
can't initialize clock_rate from DT, so set a default value in the
timer code instead.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

dm: timer: refuse timers with zero clock_rate

If a timer has a zero clock_rate, get_tbclk() will return zero for it,
which will cause tick_to_time() to perform a division-by-zero, which will
crash U-Boot.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>

bzip2: Support compression for sandbox

Add the missing code to allow bzip2 compression to be used. This is useful
for sandbox tests. These files are taken from the bzip2 1.0.6 release.
The license text is copied to the top of each file as is done with other
bzip2 files in U-Boot. The only other change is to squash a compiler warning
with nBytes.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

dm: core: Call uclass post_bind() after the driver's bind() method

At present the uclass's post_bind() method is called before the driver's
bind() method. This means that the uclass cannot use any of the information
set up by the driver. Move it later in the sequence to permit this.

This is an ordering change which is always fairly major in nature. The main
impact is that devices which have children will not see them appear in their
bind() method. From what I can see, existing drivers do not look at their
children in the bind() method, so this should be safe.

Conceptually this change seems to result in a 'more correct' ordering, since
the uclass (which is broader than the device) gets the last word.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Support the bmp command

Adjust this command to use map_sysmem() correctly so that it works on
sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

tiny-printf: Always print zeroes

At present this does not print zero values in numeric format (hex and
decimal). Add a special case for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>

pinctrl: Avoid binding all pinconfig nodes before relocation

This can create a large number of pinctrl devices. It chews up early
malloc() memory and takes time. Only bind those which are marked as needed
before relocation.

Signed-off-by: Simon Glass <sjg@chromium.org>

i2c: Correct command return values

We should not return a -ve error code from command functions. Instead,
return CMD_RET_FAILURE. This avoids the "exit not allowed from main input
shell" error messages from the hush shell.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>

dm: mmc: Try to honour the sequence order

At present we add driver-model MMC devices in the order we find them. The
'alias' order is not honoured.

It is difficult to fix this for the case where we have holes in the
sequence. But for the common case where the devices are numbered from 0
without any gaps, we can add the devices to the internal data structures
in this order.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: gpio: Allow the uclass to work without printf()

For SPL we don't really need sprintf() and with tiny-printf this is not
available. Allow this to be dropped in SPL when using tiny-printf.

Signed-off-by: Simon Glass <sjg@chromium.org>

tiny-printf: Avoid printing NULL strings

Add a check for NULL strings to avoid printing junk to the console.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>

defconfig: dra74_evm: enable timer driver model

Enable timer driver model for dra74_evm_defconfig as omap-timer
supports driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

arm: dts: dra7-evm: add tick-timer to chosen node

Specify timer2 to be used as tick-timer in chosen node.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

defconfig: dra72_evm: enable timer driver model

Enable timer driver model for dra72_evm_defconfig as omap-timer
supports driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

arm: dts: dra72-evm: add tick-timer to chosen node

Specify timer2 to be used as tick-timer in chosen node.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

ti_omap5_common: timer: do not define CONFIG_TIMER for spl

Since OMAP's spl doesn't support DM currently, do not define
CONFIG_TIMER for spl build.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

defconfig: am335x_gp_evm: enable timer driver model

Enable timer driver model for am335x_gp_evm as omap-timer supports
driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

arm: dts: am335x-evm: add tick-timer to chosen node

Specify timer2 to be used as tick-timer in chosen node.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

defconfig: am335x_boneblack_vboot: enable timer driver model

Enable timer driver model for am335x_boneblack_vboot as
omap-timer supports driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

arm: dts: am335x-boneblack: add tick-timer to chosen node

Specify which timer to be used as tick-timer in chosen node.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

am335x_evm: timer: do not define CONFIG_TIMER for spl

Since OMAP's spl doesn't support DM currently, do not define
CONFIG_TIMER for spl build.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

defconfig: am437x_gp_evm: enable timer driver model

Enable timer driver model for am437x_gp_evm as omap-timer supports
driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

arm: dts: am437x-gp-evm: add tick-timer to chosen node

Specify which timer to be used as tick-timer in chosen node.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

defconfig: am437x_sk_evm: enable timer driver model

Enable timer driver model for am437x_sk_evm as omap-timer supports
driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

arm: dts: am437x-sk-evm: add tick-timer to chosen node

Specify which timer to be used as tick-timer in chosen node.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

am43xx_evm: timer: do not define CONFIG_TIMER for spl

Since OMAP's spl doesn't support DM currently, do not define
CONFIG_TIMER for spl build.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

drivers: timer: omap_timer: add timer driver for omap devices based on dm

Adding a timer driver for omap devices based on driver model
and device tree.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>

dm: timer: uclass: Add flag to control sequence numbering

Like SPI and I2C, timer devices also have multiple chip
instances. This patch adds the flag 'DM_UC_FLAG_SEQ_ALIAS' in
timer_uclass driver to control device sequence numbering.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

dm: timer: uclass: add timer init in uclass driver to add timer device

Adding timer init function in timer-uclass driver to create and
initialize the timer device on platforms where u-boot,dm-pre-reloc
is not used. Since there will be multiple timer devices in the
system, adding a tick-timer node in chosen node to know which
timer device to be used as tick timer in u-boot.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>

arm: omap-common: do not build timer when CONFIG_TIMER defined

To prepare timer driver to DM/DT conversion do not build the
exiting timer driver when CONFIG_TIMER is defined. But since
omap's SPL doesn't support DM yet so built timer driver only for
SPL build when CONFIG_TIMER is defined.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

dm: core: Provide uclass_find_device_by_phandle() only when needed

This function cannot be used unless support is enabled for device tree
control. Adjust the code to reflect that.

Signed-off-by: Simon Glass <sjg@chromium.org>

iocon / bamboo: Drop CONFIG_SYS_LONGHELP

The iocon and bamboo boards are often on the verge of, or going over,
their allowed size limits depending on toolchain used.  If we turn off
CONFIG_SYS_LONGHELP we can gain approximately 14KiB back.

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Dirk Eibach <dirk.eibach@gdsys.cc>

stm32: move stm32 specific code to mach-stm32

This patch moves stm32 sources at one place, with this armv7m now contains
only generic stuff.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>

udoo:use load instead of fatload

That way the FS can also be ext2/3/4

Signed-off-by: Oscar Curero <oscar@naiandei.net>
Acked-by: Fabio Estevam <fabio.estevam@nxp.com>

am335x: BeagleBones enable CONFIG_AUTOBOOT_KEYED

On startup, the BeagleBone family of boards can occationally halt at
the U-Boot prompt.  Due to U-Boot receiving random data on the usart.

Migrate BeagleBone based boards to use CONFIG_AUTOBOOT_KEYED, user
will now have to enter the <SPACE> key to get to U-Boot prompt

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
CC: Craig McQueen <craig.mcqueen@innerrange.com>
CC: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

powerpc/83xx: fix build failure

Remove duplicated SDRAM_INTERVAL_BSTOPRE from mpc83xx.h,
which has been defined in fsl_ddr_sdram.h

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>

igep00x0: Remove no-op macros from config header

The patch removes some macros that are not used.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

igep00x0: Fix config header indentation

The patch fixes some indentation style problems in omap3_igep00x0.h file.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

igep00x0: Do not include config_distro_defaults.h

File is already included:
omap3_igep00x0.h -> ti_omap3_common.h -> ti_armv7_omap.h ->
ti_armv7_common.h -> config_distro_defaults.h

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

igep00x0: Cleanup ethernet support

- move chip reset to separate function
- use CONFIG_SMC911X_BASE instead of hardcoded value
- remove unneeded local variable from board_eth_init.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

igep00x0: enable CONFIG_NET_RANDOM_ETHADDR

Enable CONFIG_NET_RANDOM_ETHADDR to generate a random MAC address
when ETHADDR is not set.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

armv7: Add missing newline after OMAP die ID

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com>

ti_omap3_common: Do not define CONFIG_SPL_NAND_SUPPORT

Symbol is already defined in ti_armv7_common.h which is included
via ti_armv7_omap.h

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

kbuild: drop workaround for old style CONFIG_SYS_TEXT_BASE defines

Now, there is no board defining CONFIG_SYS_TEXT_BASE by its config.mk,
so this workaround is no longer needed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stefan Roese <sr@denx.de>

powerpc: yucca: drop redundant CONFIG_SYS_TEXT_BASE from config.mk

The include/configs/yucca.h already has the same define:
    #define CONFIG_SYS_TEXT_BASE 0xfffb0000

Remove the redundant one from board/amcc/yucca/config.mk.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stefan Roese <sr@denx.de>

mips: pb1x00: move CONFIG_SYS_TEXT_BASE away from config.mk

We can delete board/pb1x00/config.mk by moving the define of
CONFIG_SYS_TEXT_BASE to somewhere else.  Other MIPS boards are
still defining it in include/config/${BOARD}.h, so I am following
that way here.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

mips: dbau1x00: move CONFIG_SYS_TEXT_BASE away from config.mk

We can delete board/dbau1x00/config.mk by moving the define of
CONFIG_SYS_TEXT_BASE to somewhere else.  Other MIPS boards are
still defining it in include/config/${BOARD}.h, so I am following
that way here.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

mips: vct: move CONFIG_SYS_TEXT_BASE away from config.mk

We can delete board/micronas/vct/config.mk by moving the define of
CONFIG_SYS_TEXT_BASE to somewhere else.  Other MIPS boards are
still defining it in include/config/${BOARD}.h, so I am following
that way here.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

microblaze: move CONFIG_SYS_TEXT_BASE to defconfig

This is how CONFIG options are defined by Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

m68k: M54418TWR: drop board/freescale/m54418twr/config.mk

The board/freescale/m54418twr/config.mk defined TEXT_BASE, which has
the same value as CONFIG_SYS_TEXT_BASE.  The TEXT_BASE is referenced
by two files:
 - arch/m68k/cpu/mcf5445x/start.S and include/
 - include/configs/M54418TWR.h

Replace the references with CONFIG_SYS_TEXT_BASE and delete
board/freescale/m54418twr/config.mk.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Angelo Dureghello <angelo at sysam.it>

m68k: move CONFIG_SYS_TEXT_BASE to defconfig files

For historical reason, CONFIG_SYS_TEXT_BASE has been specified
in various ways:

[1] by board/${VENDOR}/${BOARD}/config.mk

[2] by CONFIG_SYS_EXTRA_OPTIONS
    (This was "options" field of boards.cfg before Kconfig conversion)

[3] by include/configs/${BOARD}.h

[4] by configs/${BOARD}_defconfig

Most of M68K boards use either [1] or [2], both of which we want to
deprecate.  Switch them into [4], which is the newest way (Kconfig).

We still allow [3] too, because it is still used by many boards and
we expect much time for conversion.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Angelo Dureghello <angelo at sysam.it>
Reviewed-by: Simon Glass <sjg@chromium.org>

spi: ti_qspi: Use 4-byte opcode for mmap read

ti-qspi driver currently uses 3-byte addressing mode(and opcodes) for
memory-mapped read. This restricts maximum addressable flash size to
16MB.
Enable the 4-byte addressing(and use 4-byte opcode) for memory-mapped
read to allow access to addresses above 16MB.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
[vigneshr@ti.com: Re-word commit description]
Signed-off-by: Vignesh R <vigneshr@ti.com>

mmc: emmc and hw partitions partition table id bugfix.

On bootup the emmc's hw partition is always set to 0 and the partition
table is read from it. When switching to another hw partition the
partition table's id is not updated but instead the old one from
hw partition 0 is used. If there is no partition table on hw partition 0
then the code will terminate and return error even if the desired hw
partition contains a perfectly fine partition table. This fix updates
the partition table struct to correspond to the specified hw partition
before testing if the partition table is valid or not.

Signed-off-by: Erik Tideman <erik.tideman@faltcom.se>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Squash the patch that corrected whitespace in the original into
this one, wrap with HAVE_BLOCK_DEVICE test]
Signed-off-by: Tom Rini <trini@konsulko.com>

arm, ubifs: fix gcc5.x compiler warning

compiling U-Boot for openrd_base_defconfig with
gcc 5.x shows the following warning:

  CC      fs/ubifs/super.o
In file included from fs/ubifs/ubifs.h:35:0,
                 from fs/ubifs/super.c:37:
fs/ubifs/super.c: In function 'atomic_inc':
./arch/arm/include/asm/atomic.h:55:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized]
  local_irq_save(flags);
  ^
fs/ubifs/super.c: In function 'atomic_dec':
./arch/arm/include/asm/atomic.h:64:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized]
  local_irq_save(flags);
  ^
  CC      fs/ubifs/sb.o
[...]
  CC      fs/ubifs/lpt.o
In file included from include/linux/bitops.h:123:0,
                 from include/common.h:20,
                 from include/ubi_uboot.h:17,
                 from fs/ubifs/ubifs.h:37,
                 from fs/ubifs/lpt.c:35:
fs/ubifs/lpt.c: In function 'test_and_set_bit':
./arch/arm/include/asm/bitops.h:57:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized]
  local_irq_save(flags);
  ^
  CC      fs/ubifs/lpt_commit.o
In file included from include/linux/bitops.h:123:0,
                 from include/common.h:20,
                 from include/ubi_uboot.h:17,
                 from fs/ubifs/ubifs.h:37,
                 from fs/ubifs/lpt_commit.c:26:
fs/ubifs/lpt_commit.c: In function 'test_and_set_bit':
./arch/arm/include/asm/bitops.h:57:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized]
  local_irq_save(flags);
  ^
  CC      fs/ubifs/scan.o
  CC      fs/ubifs/lprops.o
  CC      fs/ubifs/tnc.o
In file included from include/linux/bitops.h:123:0,
                 from include/common.h:20,
                 from include/ubi_uboot.h:17,
                 from fs/ubifs/ubifs.h:37,
                 from fs/ubifs/tnc.c:30:
fs/ubifs/tnc.c: In function 'test_and_set_bit':
./arch/arm/include/asm/bitops.h:57:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized]
  local_irq_save(flags);
  ^
  CC      fs/ubifs/tnc_misc.o

Fix it.

Signed-off-by: Heiko Schocher <hs@denx.de>

ARM: uniphier: remove unneeded if conditionals

The if block does the same as the else block does.  The conditional
is not necessary at all.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

ARM: uniphier: move UMC register macros to umc-regs.h

The umc-proxstream2.c defiens the same macros as in umc-regs.h.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

ARM: uniphier: set active ways to really enable outer cache

Each way must be unlocked to make it effective.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

ARM: uniphier: fix range invalidate for outer cache

If invalidate operation is invoked against a cache-unaliged region,
the both ends of the region should be flushed, not invalidated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

ARM: uniphier: factor out outer cache sync as a helper function

Avoid repeating the same code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

ARM: uniphier: refactor outer cache operation slightly

Improve readability without changing the behavior.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

ARM: uniphier: add bootm_low environment

The load address of the kernel can be changed via "kernel_addr_r"
environment.  The device tree and the initramdisk should be relocated
according to the kernel location.

The "bootm_low" should be calculated by masking the lower bits
(TEXT_OFFSET part) of the "kernel_addr_r" environment value.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

ARM: uniphier: define CONFIG_SYS_BOOTMAPSZ

U-Boot relocates the device tree and the initramdisk to the tail
of the memory region before booting the kernel.

Some UniPhier boards are equipped with a large amount of memory.
For those boards, the device tree and the initramdisk are placed out
of the the kernel causing a kernel panic.

Add CONFIG_SYS_BOOTMAPSZ to prevent them from going too high.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

armv8: cavium: Get DRAM size from ATF

Change the dram_init() function on ThunderX to query ATF services for
the real installed DRAM size

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>

armv8: cavium: Add an implementation of ATF calling functions

This commit adds functions issuing calls to the product-specific ATF
services

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>

armv8: cavium: Add ThunderX 88xx board definition

This commit adds basic Cavium ThunderX 88xx board definitions and support.

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
[trini: Drop CONFIG_SYS_GENERIC_BOARD define]
Signed-off-by: Tom Rini <trini@konsulko.com>

armv8: cavium: Add the device tree for ThunderX

This commit adds the FDT for the ThunderX family of SoCs

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

armv8: Add psci.h from the Linux kernel

This commit adds the psci.h header file from Linux kernel
which contains definitions related to the PSCI interface provided
by firmware

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>

armv8: Add Secure Monitor/Hypervisor Call (SMC/HVC) infrastructure

This commit adds functions issuing calls to secure monitor or
hypervisore. This allows using services such as Power State
Coordination Interface (PSCI) provided by firmware, e.g. ARM
Trusted Firmware (ATF)

The SMC call can destroy all registers declared temporary by the
calling conventions. The clobber list is "x0..x17" because of
this

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>

armv8: New MMU setup code allowing to use 48+ bits PA/VA

This patch adds code which sets up 2-level page tables on ARM64 thus
extending available VA space. CPUs implementing 64k translation
granule are able to use direct PA-VA mapping of the whole 48 bit
address space.
It also adds the ability to reset the SCTRL register at the very beginning
of execution to avoid interference from stale mappings set up by early
firmware/loaders/etc.

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>

armv8: Add read_mpidr() function

This patch adds the read_mpidr() function which returns the
MPIDR_EL1 register value

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for early debug output

This patch adds Kconfig entries to facilitate usage of pl01x as
a debug UART.

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Acked-by: Simon Glass <sjg@chromium.org>

arm: serial: Add debug UART capability to the pl01x driver

This patch adds an ability to use pl01x as a debug UART. It must
be configured like other types of debug UARTs

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
[trini: Update for _debug_uart_init change]
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://git.denx.de/u-boot-video

x86: quark: Fix boot breakage

With driver model timer conversion, quark based board does not boot
any more as mdelay() is called during quark_pcie_early_init() which
is before driver model gets initialized. Fix this breakage.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

power: regulator: max77686: Don't use switch() on bools

With gcc-5.3 we get a warning for using switch() on a bool type.
Rewrite these sections as if/else and update the one section that was
using 1/0 instead of true/false.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>

spi: rk_spi: Fix debug format warning

We need to use %lx not %x to describe a fdt_addr_t

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

pci_rom.c: Fix may be used uninitialized warning

With gcc-5.x we get:
drivers/pci/pci_rom.c: In function 'dm_pci_run_vga_bios':
drivers/pci/pci_rom.c:352:3: warning: 'ram' may be used uninitialized in
this function [-Wmaybe-uninitialized]

While unconvinced that this can happen in practice (if we malloc we set
alloced to true, it will be false otherwise), silence the compiler.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Add more SPDX-License-Identifier tags

In a number of places we had wordings of the GPL (or LGPL in a few
cases) license text that were split in such a way that it wasn't caught
previously.  Convert all of these to the correct SPDX-License-Identifier
tag.

Signed-off-by: Tom Rini <trini@konsulko.com>