]> git.sur5r.net Git - u-boot/shortlog
u-boot
2008-01-23 Wolfgang DenkMerge branch 'master' of git://www.denx.de/git/u-boot-net
2008-01-23 Wolfgang DenkMerge branch 'master' of git://www.denx.de/git/u-boot...
2008-01-23 Wolfgang DenkMerge branch 'master' of git://www.denx.de/git/u-boot...
2008-01-23 Wolfgang DenkMerge branch 'master' of git://www.denx.de/git/u-boot...
2008-01-18 Dave Liumpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
2008-01-17 Andy FlemingMerge branch 'kumar'
2008-01-17 Kim Phillipscodingstyle cleanup for spi driver
2008-01-17 Haiying WangFSL: Fix common EEPROM_data structure definition
2008-01-17 Timur Tabi86xx: enable command-line editing
2008-01-17 Ben WarrenImplement hard SPI driver on MPC8349EMDS
2008-01-17 Ben WarrenAdd support for a Freescale non-CPM SPI controller
2008-01-17 Dave Liumpc83xx: Fix the fatal conflict of merge
2008-01-17 Stefan RoeseMerge branch 'master' of /home/stefan/git/u-boot/u...
2008-01-17 Larry JohnsonMerge Sequoia beautification into Korat code
2008-01-17 Matthias Fuchsnet: add 'ethrotate' environment variable
2008-01-17 Stefan Roeseppc4xx: Fix compilation warnings and coding style issue...
2008-01-17 Niklaus Gigerppc4xx: Netstal HCU4 board: added various fixes and...
2008-01-17 Niklaus Gigerppc4xx: netstal/common define routines used by all...
2008-01-17 Niklaus Gigerppc4xx: Netstal HCU5 board: added various fixes and...
2008-01-17 Niklaus Gigerppc4xx: Netstal HCU5 board. Added POST. Various fixes
2008-01-17 Niklaus Gigerppc4xx: Netstal HCU4 board. Added POST. Various fixes
2008-01-17 Matthias Fuchsppc4xx: Complete DU440 board support
2008-01-17 Matthias Fuchsppc4xx: Add DU440 board support
2008-01-17 Wolfgang DenkMerge branch 'master' of git+ssh://10.10.0.7/home/wd...
2008-01-17 Grzegorz BernackiSet ips dividor to 1/4 of csb clock.
2008-01-17 Kumar Gala85xx: Get ride of old TLB setup code
2008-01-17 Kumar Gala85xx: Convert TQM85xx to new TLB setup
2008-01-17 Kumar Gala85xx: Convert STXGP3 & STXSSA to new TLB setup
2008-01-17 Kumar Gala85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
2008-01-17 Kumar Gala85xx: Convert PM854/PM856 to new TLB setup
2008-01-17 Kumar Gala85xx: Convert MPC8540EVAL to new TLB setup
2008-01-17 Kumar Gala85xx: Convert MPC8568 MDS to new TLB setup
2008-01-17 Kumar Gala85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB...
2008-01-17 Kumar Gala85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
2008-01-17 Kumar Gala85xx: Convert ATUM8548 to new TLB setup
2008-01-17 Kumar Gala85xx: Convert MPC8544 DS to new TLB setup
2008-01-17 Kumar Gala85xx: Reworked initial processor init
2008-01-17 Kumar Gala85xx: Introduce new tlb API
2008-01-17 Stefan Roeseppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
2008-01-17 Kumar Gala85xx: Use proper defines for PCI addresses
2008-01-17 Kumar Gala85xx: Remove old style of LAW init
2008-01-17 Kumar Gala85xx: convert remaining 85xx boards over to use new...
2008-01-17 Kumar Gala85xx: convert STXGP3/STXSSA over to use new LAW init...
2008-01-17 Kumar Gala85xx: convert PM854/PM856 over to use new LAW init...
2008-01-17 Kumar Gala85xx: convert SBC8540/SBC8560/SBC8548 over to use new...
2008-01-17 Kumar Gala85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use...
2008-01-17 Kumar Gala85xx: convert MPC8540/MPC8560 ADS over to use new LAW...
2008-01-17 Kumar Gala85xx: convert MPC8544 DS over to use new LAW init code
2008-01-17 Kumar Gala85xx: Move LAW init code into C
2008-01-16 Jean-Christophe... Fix nfs command help to reflect that the serverip is...
2008-01-16 Jean-Christophe... bf537-stamp: remove already defined is_zero_ether_addr...
2008-01-16 Shinya Kuribayashidrivers/net/rtl8139.c: rx_status should be le32_to_cpu...
2008-01-16 Shinya Kuribayashidrivers/net/rtl8139.c: Fix cache coherency issues
2008-01-16 Shinya Kuribayashidrivers/net/rtl8139.c: Fix tx timeout
2008-01-16 Dave LiuTSEC: Add the support for RealTek RTL8211B PHY
2008-01-16 Joakim TjernlundRemove annoying debug printout for PHY less boards.
2008-01-16 Kim Phillipsnet: reduce boot latency on QE UEC based boards
2008-01-16 michael.firth... TSEC driver: Change MDIO support to allow access to...
2008-01-16 Wolfgang DenkMerge branch 'master' of git://www.denx.de/git/u-boot-sh
2008-01-16 Wolfgang DenkMerge branch 'master' of git://www.denx.de/git/u-boot...
2008-01-16 Kim PhillipsAdd support for the MPC837xERDB
2008-01-16 Kim Phillipsmpc83xx: add support for more system clock performance...
2008-01-16 James YangFSL: Generalize PIXIS reset command parsing.
2008-01-16 Jon LoeligerFSL: Convert board/freescale/common/Makefile to use...
2008-01-16 Roy ZangUse CONFIG_ULI526X as MPC8610HPCD default Ethernet...
2008-01-16 Kim Phillipsmpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
2008-01-16 Kim Phillipsmpc83xx: clean up mpc8360emds.c warnings
2008-01-16 Kim Phillipsmpc83xx: fix phy-connection-type fixup code
2008-01-16 Kumar Galampc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for...
2008-01-16 Poonam AggrwalChanges in uboot DDR configuration for MPC8313eRDB
2008-01-16 Jerry Van BarenEnable the isdram command on the MPC8360EMDS board
2008-01-16 Dave Liumpc83xx: Add the support for MPC8315ERDB board
2008-01-16 Dave Liumpc83xx: Add config of eTSEC emergency priority in...
2008-01-16 Dave Liumpc83xx: Remove cache config from MPC8360ERDK.h
2008-01-16 Anton Vorontsovnand: FSL UPM NAND driver
2008-01-16 Kyungmin ParkOneNAND: Separate U-Boot dependent code from OneNAND
2008-01-16 Matthias Fuchsppc4xx: Sequoia coding style cleanup and beautification
2008-01-16 Larry Johnsonppc4xx: Refactor ECC POST for AMCC Denali core
2008-01-16 Stefan RoeseMerge branch 'master' of /home/stefan/git/u-boot/u...
2008-01-16 David SaadaQE UEC: Extend number of supported UECs to 4
2008-01-15 Wolfgang DenkLWMON5: enable hush shell as command line parser
2008-01-15 Wolfgang DenkADS5121: disable watchdog; enable image timestamps
2008-01-15 Wolfgang DenkTK885D: fixes for bigger flash sector sizes on new...
2008-01-15 Nobuhiro Iwamatsupcmcia: Remove CONFIG_COMMANDS from marubun pcmcia...
2008-01-15 Nobuhiro Iwamatsush: Add support SH7710/SH7712
2008-01-15 Nobuhiro Iwamatsush: Add support of map_physmem() and unmap_physmem...
2008-01-15 Nobuhiro Iwamatsush: Add maintainer of MS7720SE to the MAINTAINER file
2008-01-15 Nobuhiro Iwamatsush: Fix board name in MS7720SE's config.mk
2008-01-15 Nobuhiro Iwamatsush: Add MS7720SE to MAKEALL
2008-01-15 Yoshihiro Shimodash: Add support for MS7720RP02 board
2008-01-15 Yoshihiro Shimodash: Add support for SH7720 in serial_sh driver.
2008-01-15 Yoshihiro Shimodash: Add support SH3 and SH7720
2008-01-15 Stefan Roeseppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_d...
2008-01-14 Niklaus Gigerppc_4xx: Fix post spr.c for PPC405
2008-01-14 Wolfgang DenkMerge branch 'master' of git://www.denx.de/git/u-boot...
2008-01-14 Dave LiuQE: fix compile warning
2008-01-14 Stefan Roeseppc4xx: Update Kilauea CPLD configuration with USB...
2008-01-13 Wolfgang DenkARM: update mach-types.h from 2.6.24-rc7 Linux kernel...
2008-01-13 Wolfgang DenkADS5121: Fix typo in ads5121.c, adjust default environment
2008-01-13 John RigbyADS5121: MAX slew rate for PATA pins
next